Ubuntu Multimedia :: Video Capture Devices - Recording Videogame Footage
Oct 5, 2010
I'm about to go buy a video capture card this week and was wondering if there's one that's easy to setup in Ubuntu or (ideally) has some official open source drivers available. I'm planning on recording videogame footage and the like from my consoles to edit on kdenlive and upload it to ..... (why? Cuz it can be done. =P). So I'm wondering if anyone has any recommendation before I order one. I'm only interested in SD resolution for the time being.
View 1 Replies
ADVERTISEMENT
Jan 8, 2011
I frequent a website features live video streams. Afterwards, they also uploads the videos for playing online. When videos are played Flash files accumulate in /tmp which I save and edit.RECENT PROBLEM:
1) When I play the videos online, they never "start". I just get that typical circling arrow that general indicates the file is downloading to a buffer before playing. but even after 5 minutes...it never starts. While this is happening, a file is accumulating in /tmp.
2) As a test, I tried editing the temp file that appears in /tmp using OpenShot. The file is very large (on the order of 800Mb). But in the editor, only a few seconds of video appear. The rest is a blank white screen. I examined the file in a hex editor and it all "looks" the same (I can't read the Hex of course...but nothing obvious appears like lots of 00 bytes).
View 7 Replies
View Related
Mar 30, 2010
Are there any USB video capture devices that work with Linux? Something that will take an input from RCA video and audio jacks.
View 1 Replies
View Related
Jun 21, 2010
I'm looking to capture my hdv footage from a canon hv20 camera onto a laptop running Ubuntu 9.10. No clue where to find software to do this capture.Hdvsplit is a windows only free program that does this but other than that not sure.
View 3 Replies
View Related
Feb 26, 2010
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
View 3 Replies
View Related
Aug 12, 2010
I want to do a screen capture with audio and video. I use Ubuntu 10.04 64-bit.I have now spend about half a day trying various tools, most of which seem to be half finished or abandoned. I have not found any usable docs for any of these.gtk-recordmydesktop and xvidcap will both capture video, but seem unable to capture audio from a microphone. The mic is connected and the sound preferences "input" tab shows the input level jumping up when I speak, so it must be working.
I tried the pulse audio device chooser app to make sure the mic is selected, but the choices for input are DEFAULT and "other", which shows a blank input with no choices.xvidcap multi-frame dialog has dev/dsp pre-selected as the input device, with no other options. It does not work.If I enable audio with gtk-recordmydesktop, it refuses to start and says it cannot open the sound card. There is no apparently no way to do this using the "advanced" dialog which has DEFAULT preselected as the audio input device and no other options. /dev/dsp also fails to start.I spent some time searching google and the forums here, to no avail. So should I give up trying to do this with Linux or is there some obscure method I only need to discover?I prefer xvidcap, since the ogg format output by recordmydesktop seems to be a write-only format.
View 3 Replies
View Related
Oct 4, 2010
First up, let me say this post has almost nothing to do with Ubuntu, so you may ask: Then why am I here? I am here because I didn't know where else to turn.
My main problem here is that I would like to be able to record myself playing a video game on my TV, and be able to toss the file onto my computer to edit/upload. I've heard of 'Dazzle' those TV recorder things, but I'm looking for more of a home quickfix.
What I was thinking of doing was hooking up a DVD player to a tv. Then hooking up my wii to the DVD player, to the TV. This way the game would be displayed on channel three. If I were to do this, would I be able to put a blank DVD in the drive, and set it to record channel three? Since channel three will be my game, would it record the video game? I'm sure if it would, it wouldn't be the best quality.
View 1 Replies
View Related
Jan 14, 2011
Can I run this camera: Quote: Bus 001 Device 007: ID 046d:0809 Logitech, Inc as something other than a UVC driven camera? It appears that UVC in 640x480 format is only available at 15 fps. I need to record at fps=30. So I can splice into existing video.
[Code]...
echo "Recording. Ctrl-C or close window to stop" Is there a driver other than 'v4l2' I can use that will give me 30 frames per second?
View 1 Replies
View Related
Mar 18, 2011
Any software for Ubuntu that will record video using the built in laptop webcam or a usb webcam. I am looking for something that works by motion detection so it isn't constantly recording. I installed Zoneminder since it was the only thing I could find, but I couldn't get it to work.
View 1 Replies
View Related
Mar 27, 2010
I have created several DVDs from my camcorder (sony handycam DCR-HC21 NTSC); however, the recordings are too long. I would like to capture smaller segments of these and load them online to share with family and friends.I would like to know what is the most recommended software for this task. I am running Ubuntu 9.10.I would have done this by using a firewire cable directly attached from the camcorder to my laptop, but my laptop has only USB ports. So I ended up creating DVDs using an stand alone Video Recordable DVD Drive.
View 1 Replies
View Related
May 4, 2010
How do I capture video from my JVC GR-DF470 MiniDV camera into 10.04 Lucid.PiViTi looks good for an editing app, and I've installed OpenShot as well, but neither have a way of capturing the video from a camera. I used Kino previously in 8.04 Hardy, but it was buggy at best in 9.10 Karmic; I've just installed it in 10.04, but capture keeps stopping after 2 or 3 seconds. I also tried kdenlive, but the audio capture has a lot of 'noise' that is louder than the voices on the tape, and once it finishes capturing video, it doesn't display a 'Save' dialogue as it is supposed to - so that wasn't very successful either.So what can I use to capture video from a MiniDV Camera via Firewire.
View 9 Replies
View Related
Sep 29, 2010
I am working in a script I have, to capture video with sound from my capture board, wich is a clone of the pico2000. This script was working in Ubuntu 9.10 untill I reformated my machine and instaled the Ubuntu 10.10, 64 bits. The machine is an AMD Athlon II, 2.6GHz with 3 GBytes of Ram. The former script was:
Code:
#!/bin/bash
clear
SERVICE="mencoder"
MOVIE=$(date +"%H%M")
[Code].....
View 1 Replies
View Related
Dec 3, 2010
This is on Karmic Koala 9.10. The video displays fine via guvcview using a Logitech webcam. The trouble is the capturing of the video. With .AVI, I've tried different video formats (MPEG-4, flash, etc.) and none of them will play. The generated .avi file seems to grow with data, but the result is just unplayable -- it just hangs, thinking it's playing. Is there a troubleshooting page or something to figure out what the problem I'm having with guvcviewer is?
View 1 Replies
View Related
Sep 1, 2011
I'm using natty. is there any way to get a Pinnacle DVC 101 to capture video from composite source on Ubuntu Natty? it seems that when new releases break functionality they often are never fixed.
I'm also unaware of a simple GUI application to use in order to capture the video. It would need start and stop features.
View 3 Replies
View Related
Jan 20, 2010
As a TOTAL noob to Linux setting up my ATI All-In-Wonder 2006 AGP card with GATOS to allow me to transfer old video tapes to my computer (for further editing to DVD). I have Ubuntu 9.10 loaded and the relevant link for the GATOS stuff is:[URL]..
View 2 Replies
View Related
Jun 14, 2010
I use Ubuntu 10.04 in my HP 6530s notebook(2.0 C2duo1GB RAM, 512MB video). Recently i downloaded GyachE v1.1.48 for yahoo video chat. after installing GyachE when i started webcam its showing errors: Fatal: Video format not supported by Grab device.
View 3 Replies
View Related
Aug 30, 2010
Anybody had any success in getting ffmpeg to work as advertised with video capture from a webcam? I really want to convert the webcam output to VP8 or H264, but apparently ffmpeg can't even capture the webcam with a video4linux device.
Code:
View 9 Replies
View Related
Jan 23, 2011
I wanted to share this nifty technique I came across for capturing video using the command line. The problem: I have a bunch of old VHS tapes (remember those...?) and need to get them digitized. I have a VCR, and a Dazzle Hollywood DV Bridge which captures video to DV over Firewire (IEEE1394). I first tried using Final Cut Pro, but it wouldn't capture, perhaps because it expects a controllable DV camera, and the Dazzle isn't a DVC device. I then tried my other favorite video editing app, Kdenlive, but it seemed to have the same problem.
I took a quick stab at the other common editors in the repositories (Kino, Openshot, etc.), but no luck with any of them. Then I remembered the dvgrab command, and gave that a shot and it worked, giving me a nice .dv file. However, DV makes pretty big files, which I wanted to compress down to something more manageable. Since I was going to be digitizing hours and hours of tapes, it would be great if I could compress while capturing. A little more googling and I had the answer - you can pipe dvgrab directly into ffmpeg! Here's the command:
Code:
dvgrab -format dv1 - | ffmpeg -f dv -i - -b 2000k -ab 512k -y output.mov
the first part starts the capture, in DV1 format, and outputs it to a pipe file. usually you give dvgrab a filename, like
Code:
dvgrab -format dv1 capture.dv
the second part does the encoding:
-f dv: use DV format
-i -: input from the pipe
-b 2000k: video encoding bitrate of 2000k/sec, high quality
-ab 512k: audio encoding bitrate
-y: overwrite file if it exists
I didn't set the codec explicitly, for Quicktime it defaults to MPEG4. This worked great, capturing a 2-hour tape into a high-quality quicktime around 2GB. But I also wanted to be able to view the capture while it was going. Since I left the field monitors and audio splitters at the office, I had to figure out how to do this in software. Turns out that the "tee" command does exactly what I needed - the shell never ceases to amaze! Here's the full command:
Code:
dvgrab -format dv1 - | tee >(ffmpeg -f dv -i - -b 2000k -ab 512k output.mov) >(playdv --disable-audio --no-mmap)
tee uses the
Code:
>(command)
syntax to pipe simultaneously to multiple processes. The only thing that didn't work was audio playback, which was choppy and introduced errors in the capture file. I think a little tweaking with the capture rates could fix that.
View 2 Replies
View Related
Feb 13, 2011
Up untill this week I used to grab a streamed video from my root/tmp file. Video is nolonger streamed to this file. What has happened? and how can I grab streamed video?
View 9 Replies
View Related
Jul 10, 2010
I'm trying to capture video from my Sony DCR-HC21 video camera. I've managed to install Kino fine but was getting the error
aw 1394 kernel module not loaded or failure to read/write /dev/raw/1394
I could get it working by opening as root but then the files belong to root which I didn't want. So I did the following (as suggested in another thread:
chmod 777 /dev/raw1394
And now I get the error "No AV/C compliant cam connected or not switched on"
I've tried so many things ie [URL]
and as I'm a novice I'm reluctant to keep trying random things when I don't really know what its doing.
OK, it's back to the first error, is there anyway to run Kino and capture video without changing to root?
View 9 Replies
View Related
Oct 23, 2010
On my Windoze machine, I use Replay Media Catcher 4 which runs silently in the background and captures any videos (FLV, AVI, MPG, WMV, etc) on any websites that I happen to go to, and saves them to a folder on my hard drive. Right now, if I want to save a video that I'm wathing from Ubuntu, I have to go to /temp, guess which file it is, and copy it after it downloads fully but before it finishes playing, otherwise Firefox deletes it from /temp right away. This is a pain.
Yes, there are screen motion capture utilities in the Ubuntu Software Center, but they're just screen scrapers that result in low quality copies without any audio. I want something that will actually capture the video stream and save it as a file. Even if it doesn't save all videos automatically like RMC4, and I have to right click on the video to Save As, that would be better than copying it from /temp at the precise exact moment.
View 7 Replies
View Related
Dec 18, 2010
I've made a lot of progress getting my easycap 2.0 usb capture device to work with ubuntu 10.10. I've got the picture up any everything works great. But about a minute into the stream it just freezes, I need to go into "playback" and either pause then play, or click "next", it then refreshes and works again for another minute or so. I'd believe it if someone says faulty hardware because the easycap is cheap, but I don't think that's the case. Additionally, is there any way to set VLC so that when I open it, it automatically opens with my video capture device (/dev/video0) so that I don't have to go into the options and change it every time?
View 1 Replies
View Related
Nov 24, 2009
Does anybody know what has happened to Kino - the video capture utility? Used to be packaged by packman for Opensuse but doesn't seem to be available for 11.2.
Is there an alternative I can use for video capture - or has packman just not gotten around to adding this yet?
View 1 Replies
View Related
Sep 25, 2010
In Ubuntu 9.10, I was successfully able to use my Pinnacle Dazzle DVC 100 (a cheap USB analog video capture device). I use it for backing up old video that is stored on tapes, and it isn't working with my current install of Ubuntu 10.04. When I plug the device in, it should be detected and the em28xx module should be loaded. This fails and /var/log/messages has the following:
Code:
Sep 25 16:13:18 kernel: [1196215.111898] usb 2-2: new high speed USB device using ehci_hcd and address 20
Sep 25 16:13:18 kernel: [1196215.266097] usb 2-2: configuration #1 chosen from 1 choice
[code]....
View 3 Replies
View Related
Nov 11, 2010
Does anyone know an Ubuntu 10.10 compatible video capture card that has composite connections for video and audio (yellow, red and white)? It must be external and do its own processing so it doesn't use the computer's own CPU. I intend to capture a live stream and have the Ubuntu PC serve it to other computers. I may use VLC or MythTV. I have looked on various related sites but finding a compatible USB one which does its own decoding is hard to find.
View 2 Replies
View Related
May 22, 2010
I just installed skype 2.1 beta 2 (the deb file) from the skype website, but the only option I see under Sound Devices -> Recording is "PulseAudio Server (local)" This doesn't work for me, as the skype test calls don't actually record anything I say. I use skype a lot and FINALLY got it working under karmic, but I needed to upgrade to lucid and now it's broken.
When I open Sound preferences and look at the Applications section, Skype shows up as recording when I run its test call... but no sound is recorded? How is it possible that my sound card picks up something recording but doesn't actually record it when I'm in skype?
View 9 Replies
View Related
Apr 21, 2010
I basically want to record audio streams. The most useful purpose is to record conversations on skype (and other applications). This is for a legitimate reason if anyone is worried; I often have long conference calls on skype (an another voip collaborative tool called EVO), and a recording would be a nice way to keep minutes and participate in the working meeting. I'm not worried about capturing video yet. The audio is the important for me for now. This is going to display my woeful ignorance of Linux audio systems. I'm running F12 x86_64 on a Dell inspiron laptop. I believe that the system is using the PulseAudio sound server.
I thought something like:
ffmpeg -f oss -i /dev/dsp sample.mp3
Could work, but I don't have a /dev/dsp. I think these are in a separate directory /dev/snd; however the content of this directory is not clear which device is the appropriate one. I tried pointing ffmpeg to a few of them, but it resulted in errors thus:
/dev/snd/hwC0D0: no such file or directory
I know it's there because [tab] complete. I found another alternative which uses parec.
parec --format=s16le --rate=44100 -channels=2 sample.raw
Unfortunately this only records the microphone input and not everything else going through my sound server. I wish I could find the link again, but there was a third alternative which required writing a bit of C code. I thought that could be a nice little project to better acquaint myself with this stuff.
View 9 Replies
View Related
Aug 6, 2010
I am trying to record a test video with my built-in webcam, using Cheese. However, after I click "Start recording," the Cheese screen turns black, and Cheese seems to hang. I can click "Stop recording" sometimes -- then I get a split-second video clip. But mostly it just hangs until I force quit.
I'm on an Asus 900HA. I could record video clips on using eeebuntu and Cheese. Is there a setting I need to check?
View 8 Replies
View Related
Dec 30, 2010
I have acquired a Canopus ACEDVio video capture card and can not get it to work.
View 1 Replies
View Related
Mar 11, 2010
I have an Acer Aspire One Netbook, and I have the Ubuntu 9.10 Netbook Remix installed. I have tried using Cheese to capture video and it captures maybe 2 seconds of movement, then goes black and/or the image freezes. I can take photos just fine, but video capture seems to be impossible. Any help?
View 2 Replies
View Related
