my logitech quickcam zoom works out of the box for taking local pics and local videoshots. It's seen by Cheese, camorama, However, it doesn't work on aMSN, nor on any video-enabled website. lsusb tells me: Bus 004 Device 003: ID 046d:08b4 Logitech, Inc. QuickCam Zoom
Is there someone around who has got their logitech quickcam zoom to work and is willing to share his/her knowledge?
What I'm trying to do is set up my quickcam to stream video to a web page for zone minder to pick up. If that makes any sense.
Here is the error that I'm getting:
Code:
libavutil 50.15. 1 / 50.15. 1
libavcodec 52.72. 2 / 52.72. 2
libavformat 52.64. 2 / 52.64. 2
[Code]....
an't get my webcam to work. with anything, letalone skype. lsusb feedback Bus 002 Device 002: ID 046d:08af Logitech, Inc. QuickCam Easy/Cool
[Code]...
I'd like to install a Logitech webcam with built-in microphone in order to use it in Skype.
It seems to been recognized :
And softs links seems to be created :
Code:
I can't understand the last line... I also got trouble with Adobe Flsah Square flash 64 bits and it may be related to it.
I do not know where looking for. Here are the output of Webkam and Wxcam.
I am running Xubuntu Lucid 10.04 on a Sony Vaio. I recently dropped $100 on a Logitech QuickCam Vision Pro for Mac, on the recommendation on the ubuntu wiki [URL].. that it would "work perfectly" in Skype. In Skype, it did nothing. No Audio, no video, light wouldn't even come on. Essentially a $100 dollar paperweight. I really think someone should correct this misleading information on the wiki.
I followed the kludge listed here [URL].. to get the video to work. By executing Skype with the shell script listed in the first post, I could get the video test to work, but no audio, and when I tried to call someone, when I turned on video, Skype quit suddenly. For the record, yes, I unmuted the device in the Sound Mixer in the top right corner.
Later on, I tested it with guvcview, and the cam worked perfectly in that program. It's only Skype that doesn't know what to do with it. When I execute Skype in Terminal I get the following output repeating over and over again:
Code:
X Error, request 20, minor 0, error code 3 BadWindow (invalid Window parameter)
X Error, request 15, minor 0, error code 3 BadWindow (invalid Window parameter)
libv4l2: error setting pixformat: Input/output error
libv4l2: error setting pixformat: Input/output error
[Code]...
I have a Logitech QuickCam Pro 9000 which works with Skype, Cheese, Ekiga, and Flash on Ubuntu 9.10 with no problems. (With Ubuntu 8.04, the video worked with all of these but Skype (couldn't test Skype as it was not available) but not the audio, which was one of the reasons I upgraded). It does not work with Flash in Ubuntu 10.04. Flash does not detect the camera though it does detect the microphone (and says it works, haven't tested it yet). It works (video and audio) with Skype and Ekiga. The video works with cheese and I can record my own voice with Sound Recorder off the webcam's mic.
I have looked at the webcam community documentation [URL]..and have visited Adobe's site [URL].. to click on "always allow". But that does not work either. Flash simply does not see the camera. The version of flash on both computers is the same (10,1,53,64).
Inspired by some recent posts from oldcpu I decided to grab some audio from my Logitech webcam, just for the fun of it. openSUSE 11.3 i586 is in use.
Code:
> lsusb
Bus 002 Device 003: ID 046d:0991 Logitech, Inc. QuickCam Pro for Notebooks
> arecord -l
**** Liste der Hardware-Geräte (CAPTURE) ****
Karte 0: Intel [HDA Intel], Gerät 0: ALC892 Analog [ALC892 Analog]
[Code]...
It works! Though I have to say that the audio quality is mediocre (to say the best). I blame it on the quality of the built-in microphone of this camera. It sounds like it was recorded in a giant bathroom.
I'm attempting to make my Logitech Quickcam Express work with Ubuntu 10.04.I what may be the problem but it doesn't seem to work with any of the applications so far. I visited [URL] and attempted to extract and compile the drivers but ran into problems.
Code:
incarnation@incarnation-desktop:~/Desktop/qc-usb-0.6.6$ make all
make -C "/lib/modules/2.6.32-22-generic/build" SUBDIRS="/home/incarnation/Desktop/qc-usb-0.6.6" modules V=1 USER_OPT="-DHAVE_UTSRELEASE_H=1"
[code]....
My sound worked fine for the first few days.. then I noticed the mic wasn't working in skype so I tried messing with it in sound preferences. Now my speakers explode with this horrible distorted noise(semi-recognizable as whatever I'm trying to play) and sometimes freezes when I try to play any sound. Reinstalling just the drivers to avoid a fresh install, according to the stickied thread at the top, did nothing. Attempting to place the settings back to their defaults also does not appease this bloodthirsty beast.
I've been on a rampage through every lead I've found on trying to fix this problem but nothings worked so far.. it seems the problem is that the onboard speakers (Internal Audio; Analog Surround 4.0 Output) hates it's life in an Ubuntu OS too much to continue living. Not sure if the RS880 Audio Device [Radeon HD 4200] output is with it either.
Also heres my.. file report thingy(alsa-info.sh): [URL]
The laptop in question: [URL]
I have two computers--a Zareason machine (no details yet) running 8.04. I also have a Dell 1525N laptop running 9.10. I purchased recently a Logitech QuickCam Pro 9000 Webcam. The video works on both systems with Ekiga and Cheese. I can also see the video in Flash applications (but *not* in Meebo even with the other person logged into Meebo). (Both computers are running the latest Flash plugins).
However, the built-in microphone is problematic. With 8.04, I get playback when I test it under System|Preferences|Sound--but with lots of echo. But I get no sound with any Flash chat applications. I've not been able to test it with Ekiga as the testee (a Windows 7 user) can't get Ekiga to work on his machine (probable Windows firewall issues). I haven't installed Skype because Skype pulled its 8.04-compliant .deb packages and I've not tried yet to compile it from source code.
With 9.10, the webcam works with Cheese (video) and I can get both webcam and mic to work with Skype. (Again, no test result possible for Ekiga until I get a testee). However--my Win7 testee friend says that when I log into Googlechat using Pidgin on my 9.10 laptop, a webcam icon appears next to my userID telling him that I have an open webcam (even when there's NONE actually plugged in). He doesn't see the same icon when I log into my 8.04 desktop with no webcam plugged in. I have searched Pidgin and my System preferences and see no evidence that any of these applications or my system sees a webcam that's not there.
So--how to get the mic to work? (I am thinking the simplest answer will be to simply upgrade my desktop to Lucid). And also, why the webcam icon in Googlechat even when no webcam is plugged in on my 9.10 laptop??
I've browsed the forums on how to make the Logitech Quickcam Messenger webcam work. The problem I am running into is that the one and only website that seems to have the patch is[URL]...This website seems to be defunct. So does anyone have this patchfile or know where I can find it? Or some other option or work around?
View 3 Replies View Relatedhow to install a logitech quickcam pro500
View 4 Replies View RelatedCode:
lsusb
046d:08af Logitech, Inc. QuickCam Easy/Cool
Apparently, this webcam uses the gspca2 driver. The gspca modules are loaded but if I try using a program like cheese it tells me no device was detected.
Code:
hwinfo --usb
17: USB 00.0: 11200 TV Card
[Created at usb.122]
Unique ID: YccR.9AtOl3Z230E
[Code]....
If I do a modprobe -rf gspca_zc3xx and then modprobe gspca_zc3xx I see the light blink a couple times, but it still doesn't work in cheese.
I have a USB Logitech Quickcam (not sure what model) and I'm trying to simply get some live video running in UCView. I've compiled a bunch of device drivers into my kernel, including Video4Linux, Quickcam BW and Quickcam Colour (some logical choices). However, I am unable to get anything from my Quickcam. Regardless of whether the camera is plugged in, I can run UCView and get a video of scrolling colors, like the attached picture.
This is coming from /dev/video0. I just don't know how I can somehow hook up my quickcam to a video device.
I'm having a confusing time with this webcam. When I plug it in, dmesg shows it is recognised and needs the module gspca_spca561
Code:
[ 6644.595789] usb 1-6: new full speed USB device using ohci_hcd and address 4
[ 6644.707379] usb 1-6: configuration #1 chosen from 1 choice
[ 6644.752736] Linux video capture interface: v2.00
[code]....
However, there is no result in skype, ekiga, or awetv, although the device /dev/video0 is created. there was a kernel update from Ubuntu 2.6.24-23-generic to 2.6.24-24-generic, and the webcam magically started working, using a different module, gspca. However, after some celebration, I found that my usb tv dongle, which uses the dvb_usb_af9015 module, ceased working.
I corrected this by recompiling the dvb_usb_af9015 module, using source from http://linuxtv.org/hg/~anttip/af9015/ ----after another celebration, I found that the webcam had stopped working again, and I have not been able to make it work since, despite recompiling the gspca module from http://mxhaard.free.fr/download.html. Attempting to insert the gspca module produced from this gives:
Code:
insmod: error inserting 'gspca.ko': -1 Unknown symbol in module Another thing I've noted, is that the gspca module will work when I boot into earlier kernels (eg 2.6.24-21-generic).
I am trying to get Skype working, the only problem is the webcam, in the test video all I get is a black screen.
After some research I found this command to get Skype to work with my webcam, as you can see there are a few errors.
Below is a listing of of /usr/lib/libv4l/ directory
Other than the video, eveything seems to be working.
This is on Skype 2.2, Skype 2.1 was the same. webcam works fine.
If this sounds like a repost, that's because it is. I'm reposting because the problem is still here, nothing has changed. It's been well over a year now since I bought this damn webcam (thinking it would work because I got indications that it was known to be Linux compatible) and I'm still no closer to any sort of solution.
I can start Cheese, press record, and get a perfectly functional video. But despite my webcam having a microphone and despite ALSA detecting it (refer to old topic) I get no sound. Just complete silence. I can't even confirm whether this is a hardware or software problem because I don't know any way to test it because no one even seems to want to look at the problem! I actually want to make some videos now, but I can't because of this problem. Edit: I just tried this with our second, less powerful PC running Ubuntu Karmic. It worked. I got sound out of the webcam. That's confirmation to me that this is a problem with Debian and not with the webcam. So why does it produce sound on another PC using Ubuntu Karmic and GNOME, but not on this PC using Debian testing/unstable with KDE?
I am looking for drivers for my Logitech quickcam pro 3000 webcam. I can not get my webcam to work in linux.
View 4 Replies View RelatedI've got a Logitech QuickCam Communicate STX webcam. According to this website, this webcam works under Linux; however, when I open Cheese, I get only a screen full of colored bars (like what you see on a television channel that's off-air), and in Skype I get green snow.
View 5 Replies View RelatedIn vlc, cheese I'm getting only this resolution.
[ 464.100250] uvcvideo: Adding mapping Brightness to control 00000000-0000-0000-0000-000000000101/2.
[ 464.100262] uvcvideo: Adding mapping Contrast to control 00000000-0000-0000-0000-000000000101/3.
[ 464.100270] uvcvideo: Adding mapping Hue to control 00000000-0000-0000-0000-000000000101/6.
[ 464.100279] uvcvideo: Adding mapping Saturation to control 00000000-0000-0000-0000-000000000101/7.
[ 464.100287] uvcvideo: Adding mapping Sharpness to control 00000000-0000-0000-0000-000000000101/8.
[ 464.100295] uvcvideo: Adding mapping Gamma to control 00000000-0000-0000-0000-000000000101/9.
[ 464.100304] uvcvideo: Adding mapping Backlight Compensation to control
[Code]...
Somewhy it is using YUY, but not MJPEG, although seems MJPEG can give larger resolution. How to get it? Single shot 1,3MPix technically possible, any way to do that?
After upgrading Ubuntu to 10.04, my Logitech, Inc. QuickCam Orbit/Sphere AF now has a blue tint in both Skype and guvcview (So probably everything).
Anyone run into this problem? I am going to run my updates to see if this helps for the time being.
I have a rather old webcam, a Logitech quickcam messenger. This webcam was working fine with older linux kernel version, I think < 2.6.27. The gspca driver that makes this peripheral working has been merged into kernel sources, and I think that my webcam stopped working with this merge. I am a Slackware user, and until version 12.2 my webcam was working (I manually compiled and installed drivers). If I well remember, with version 13.0 (kernel 2.6.29) the video was full of strange artifacts, and with Slackware 13.1 (kernel 2.6.33) the webcam does not work at all. I am performing these tests with skype, that had videocalls fully working before gspca was merged into the kernel tree, while now I can only make phone calls.
This are the informations given by dmesg:
Code:
usb 3-3: new full speed USB device using ohci_hcd and address 6
usb 3-3: New USB device found, idVendor=046d, idProduct=08da
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
gspca: probing 046d:08da
[Code].....
I've just upgraded from 10.10 to 11.04 and sorted out the mess that came along, now there's just one thing left and I'm all set. I have always used Emulate3Buttons and had it working on 10.10 earlier as well but now I can't seem to get it going.
I've edited my xorg.conf like this:
Code:
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse0"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
EndSection
Nothing happens if I write "yes" or "no" (or true/false).
i heard about that Ubuntu now finally releasing it's new version of Ubuntu distribution. It will launch on 28 april.. how to use this version on ubuntu 10.10 is there any possible strategy to switch on Ubuntu 11.04 Natty Narwhal
View 11 Replies View RelatedI've been running Ubuntu on my laptop for a while, and I recently upgraded from 10.04 in Ubuntu using System -> Admin -> Update manager. However, when I now run System -> About Ubuntu, I'm told I'm running Natty Narwhal 11.04, rather than Ubuntu 10.10 which I was aiming for. I never noticed this earlier, though... I guess it's a month or two since I upgraded.Did something go wrong in the update and cause this to happen by mistake?I there a way for me to downgrade to 10.10?
View 1 Replies View RelatedThis may sound like a silly question, but I can't seem to find the answer. How can I go about making Gnome the default desktop session in Natty?
View 1 Replies View RelatedI thought before breaking my working PC, i thought id better ask the question.Is it possible to download a GDM log in theme and get it running on Natty? I've googled loads of possibilities, but got a feeling that as Natty is GDM2 it can't be done.I've downloaded Tweak and been able to change the log in wallpaper and the icon, but i want one of those fancy log in screens that ive seen on Gnome eyecandy.
View 1 Replies View Relatedhow to install pess 2011 on natty narwhal.?
View 1 Replies View RelatedI have Ubuntu 11.04 Natty and when I started it the first time it wasn't connected to the Internet. I refreshed and did the basic stuff. But it wasn't so simple. I went to Network Tools and Natty didn't recognize my router. I am not connected through Ethernet either. I can't do/can't afford to do an ethernet hookup. I don't want to spend my time running a cable to the floor below my CPU. Anyway, I have a Broadcom 4306 Network Controller. I am currently using my Windows to post. Also, I can't get drivers from Synaptic or anything (that includes NDISwrapper). Can I use Windows drivers without downloading NDISwrapper? I'm so confused and starting to think this is hopeless. Even worse: I don't have a disk for installing Ubuntu, I downloaded online alongside Windows with Wubi, Again, my network controller is a Broadcom 4306.
View 9 Replies View RelatedHow do I enable wireless in Natty Narwhal? When I type in "lshw" it tells me: *-network=DISABLEDHow do I enable wireless? I'm going crazy trying to figure it out!Also, My Ubuntu has absolutely no Internet. Not even an Ethernet connection. I'm using my Windows for my Internet right now.
View 9 Replies View Related
