Ubuntu Multimedia :: No Sound With Dazzle DVC 100 In Natty?
May 15, 2011
Something went wrong during my upgrade to Natty two weeks ago and I had to do a fresh install. I've been trying to play Wii (using a Dazzle DVC 100) via VLC, which used to work just fine. Please refer to the attached screen print. Now, the video comes out okay, but there is no audio. I've tried playing around with the name of the audio device (hw:1,0 for example), but it still doesn't work.
I've also tried video capture with Lavrec, but it gives me this error: [lavrec] Error initializing Audio: Audio task died. Reason: Error /dev/dsp - No such file or directory
Could this be related to my other problem? I've looked in the /dev folder and, indeed dsp is not there, nor is there a dsp0,1,2, etc. Sound is working fine for everything else, though. I've Googled and tried some suggestions, but nothing has worked for me. BTW, I did an Ubuntu minimal installation, so I might have missed or forgotten to install something. I have installed the gstreamer good, bad and ugly plugins.
View 4 Replies
ADVERTISEMENT
May 9, 2011
so i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
View 4 Replies
View Related
May 9, 2011
I just did an install on a new partition to upgrade my htpc. I'm unable to get any sound over SPDIF working. I do not have a receiver that accepts HDMI so I need to use spdif That said, i was able to test the hdmi portion of the sound with my tv and that appears to be working fine.[URL]Below is just the list of aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
[code]....
View 4 Replies
View Related
May 3, 2011
So I did the update to Natty and it went pretty smoothly, with one exception. My rig has two sound cards in it: the integrated motherboard sound card (Intel HDA audio) that I don't use, and a Sound Blaster Audigy (the original Audigy 1) that I do use.
This setup has worked fine in Ubuntu for as long as I can remember, but after the upgrade to Natty it appears that GNOME no longer knows that the Audigy is the card that's in use. It insists on routing things like volume changes via gnome-volume-control to the motherboard. I can confirm this by watching the volume levels for each card in alsamixer while modifying them in gnome-volume-control; the levels move appropriately on the integrated card, and stay stuck on the Audigy.
What makes this bizarre is that it's not that the Audigy isn't recognized -- it's shown in the "Hardware" tab of Sound Preferences, and the system plays back audio just fine through the speakers connected to the Audigy. It's just that I can't change the volume on the sound through the panel applet anymore. Normally I would fix something like this by using the Hardware tab to switch from the one card to the other, but in this case when I make that change it doesn't stick -- if I close the Sound Preferences and then open it again, it's right back to being set to the integrated audio.
Maybe this is a PulseAudio issue with older Audigy cards? I have no idea.
I can change the volume with my speakers' volume knob and my keyboard's media keys, I suppose, but I'm so used to be able to change it via gnome-volume-control that not being able to feels bizarre. Has anyone else out there with add-on sound cards installed alongside motherboard audio experienced this?
View 2 Replies
View Related
May 11, 2011
In Maverick, I had sound working through a USB sound card and through my laptop internal speakers. The built-in headphone jack did not work. After upgrade to Natty, only the internal speakers work, so I have no way of playing through external speakers or headphones. My ALSA debug output is here: [URL]..I have been using pavucontrol for mixing and output selection, and nothing is muted. Sound works through internal speakers, built-in analog output, and USB sound card in Windows, so there is no hardware problem.
Getting either working would be fine. I may be failing to understand fundamental things.
View 5 Replies
View Related
May 4, 2011
My sound worked fine for the first few days.. then I noticed the mic wasn't working in skype so I tried messing with it in sound preferences. Now my speakers explode with this horrible distorted noise(semi-recognizable as whatever I'm trying to play) and sometimes freezes when I try to play any sound. Reinstalling just the drivers to avoid a fresh install, according to the stickied thread at the top, did nothing. Attempting to place the settings back to their defaults also does not appease this bloodthirsty beast.
I've been on a rampage through every lead I've found on trying to fix this problem but nothings worked so far.. it seems the problem is that the onboard speakers (Internal Audio; Analog Surround 4.0 Output) hates it's life in an Ubuntu OS too much to continue living. Not sure if the RS880 Audio Device [Radeon HD 4200] output is with it either.
Also heres my.. file report thingy(alsa-info.sh): [URL]
The laptop in question: [URL]
View 2 Replies
View Related
Apr 21, 2011
i just install the driver for dazzle dvc100. i tested out on vlc and cheese and it work. but now i need other program other then using wine, cheese and vlc. cheese and vlc is so laggy and cheese records in black/white and super duper uber laggy. so any program to record gameplay?
View 3 Replies
View Related
Jun 22, 2011
Since I installed Natty recently, I had this "popping" sound from the speakers when the laptop was running on battery. Turns out this popping has to do with a power-saving feature for "hda-intel" sound-chips.
Open terminal and do:
Code:
gksudo gedit /usr/lib/pm-utils/power.d/intel-audio-powersave
Find this line:
INTEL_AUDIO_POWERSAVE=${INTEL_AUDIO_POWERSAVE:-true}
And comment it out by putting a "#" in front of it like this:
# INTEL_AUDIO_POWERSAVE=${INTEL_AUDIO_POWERSAVE:-true}
Just below this line you make a new line, like this:
INTEL_AUDIO_POWERSAVE=false
So now you will have:
# INTEL_AUDIO_POWERSAVE=${INTEL_AUDIO_POWERSAVE:-true}
INTEL_AUDIO_POWERSAVE=false
Save the file (File > Save) and exit.
Reboot the computer.
The popping sound will be gone.
If you for some reason need to undo the setting, just open the file again and remove the "#" from:
INTEL_AUDIO_POWERSAVE=${INTEL_AUDIO_POWERSAVE:-true}
And delete this line:
INTEL_AUDIO_POWERSAVE=false
Save the file.
Reboot.
View 4 Replies
View Related
Aug 3, 2011
I'm having a problem with my sound in the Natty Narwhal version of Ubuntu, where my bass doesn't seem to be working and is coming out as fuzz instead. I don't really know the technical terms for what I'm trying to describe, but instead of the deep part of a piece of music, I get this kind of v sound in the background instead. I get the same problem on headphones or from the speakers, and turning the volume up or down doesn't make any difference. Alsamixer tells me that my card is called HDA Intel, chip ALC272X. I've already tried turning down the PCA volume, as I've seen recommended in other places, but no luck.
View 1 Replies
View Related
Jul 2, 2011
I've just bought myself a E-MU 1820M audio interface for use in home recording after seeing online that a number of people have managed to get it working. The card replaces a Terratec DMX 6Fire (which i only managed to get outs from, no in's). I have done everything and anything suggested all on the forums and websites i can find and still no in's or out's at all, and no lights on the dock functioning.
Having tried and failed on a number of things i decided to see if Alsamixer had picked it up, only to be shown a blank grey window with nothing showing. I purged ALSA and started again (I have even done a fresh install of natty in case it was anything else getting in the way that i had done previously) but to no avail. I am using ALSA driver 1.0.24, which is the latest version, and according to the ALSA website, the EMU support was addded in post-1.0.15, so all should be well.
View 7 Replies
View Related
Jul 3, 2011
Have tried to rip vcd to hd. I'm using 11.04. I want to put various home vcd files onto a dvd. I am aware of the quality issue.
View 6 Replies
View Related
Apr 30, 2011
Having finally got comfortable with ManDVD, but only having used it for a couple of weeks, I've had to get my head around something new, AGAIN, after finding that ManDVD is not yet available for Natty.
From what I have googled, there are one or two ways around it, but it means building a version, and quite honestly, I'm over that crap now, and all I want is to install and use.
Thankfully, I still have a pc with Shrink, Fab and Nero still installed.
View 4 Replies
View Related
Jun 8, 2011
When vlc 1.1.10 hits natty, this is a minor security and bugs update so it should arrive soon officially?
View 5 Replies
View Related
Apr 17, 2011
This is an Acer Aspire 5720, with a "Mobile GM965/GL960 Integrated Graphics Controller". Although I initially though this was a problem with my installation, so I ran both the Maverick and recent Natty live cds and the s video out only functioned on the Maverick cd. The computer acts as if there is another monitor, but the TV does not display one.
View 9 Replies
View Related
May 10, 2011
First you need to download the source code from [URL]
Next you need to make sure you have all the dependencies in order to complete the build. All of the dependencies can be acquired with apt as usual.
Dependencies:
libtool
automake
libgraphicsmagick1-dev
libjasper-dev
libgtkhtml2-dev
libgpgme11-dev
[Code]......
Hopefully if all went well then Gyachi should be installed in /usr/local/gyachi unless you specified a prefix option to configure. Now you can run the Gyachi program from the shell or your menu.
View 2 Replies
View Related
May 11, 2011
So after my Natty upgrade, mpd stopped working. All I can see in the logs are the following lines:
No protocol specifiedxcb_connection_has_error() returned true The Pulse Audio wiki suggests that this might be an access rights problem: [URL]...hts_are_broken I tried that, but with no success.
Anyone else had this problem? And any ideas about how I can diagnose and fix this?
View 1 Replies
View Related
Jun 6, 2011
My daughter has an ipod and she wants me to change tracks on it but when I plug it in on natty this message appears:
Code:
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdg2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I do not understand this message try dmesg what is this?
View 3 Replies
View Related
Jun 11, 2011
following chained updates of my music server from 10.04 to 11.04 I no longer have any sound, which is sort of bad for a music server...Primary soundcard in the setup is USB So I tried the command posted in various "no sound" threads
sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-`uname -r` linux-ubuntu-modules-`uname -r` libasound2
Which reinstalled stuff as expected, except had this error in the output: Couldn't find any package whose name or description matched "linux-ubuntu-modules-2.6.38-8-generic" Could the error be because of backports?
aplay -l helpfully reports aplay: device_list:240: no soundcards found.
and the output from
wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh
can be viewed here:
http://www.alsa-project.org/db/?f=cb...54c3f65b70dec7
View 1 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Dec 20, 2010
I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies
View Related
Jun 7, 2011
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
View 4 Replies
View Related
May 1, 2010
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies
View Related
Jun 10, 2010
I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
View 1 Replies
View Related
Nov 29, 2010
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
View 1 Replies
View Related
Dec 14, 2010
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
View 6 Replies
View Related
May 8, 2011
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies
View Related
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
Jun 21, 2010
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
View 3 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Feb 16, 2010
I recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
View 5 Replies
View Related
