I like the new 11.04 ubuntu, especially the left panel. However, performance dramatically dropped when i did the upgrade. What I'm asking is, how do I improve the performance of Natty?
If I can't, how can I downgrade back to 10.10?
I installed preload, I unchecked all startup applications, I uninstalled programs I wouldn't use. Any other tips for a faster Ubuntu?
View 9 Replies View RelatedI have windows xp professional installed and I have 256 MB RAM and 80 GB hard disk.I installed Ubuntu 10.04 LTS Desktop Edition alongside on windows on a formatted 12 GB C drive(windows on E drive).When I used linux it was very slow but my windows is running smoothly.How can I get normal and smooth speed on linux as I have it on windows.Will removing the windows speed up linux?
View 4 Replies View RelatedOne of the most common tasks I perform is browsing for files. I have always wanted my file manager to be lightning fast. That is, I open it and it loads directories instantly. No waiting, just opening them right away. This remained always a wish, as in Windows and Ubuntu on a variety of machines I always see that it takes a little while for the program to load directories. I am not talking about folders with thousands of files or anything special. However, I have seen others who have Windows (XP in this case), and their Explorer opens right away. Browsing folders is very much instant.
Is there any way to achieve the same in Nautilus? The other computer is not very modern or super fast, at all.
I have a laptop with SSD drive which I hoped would speed up this process, but this is not the case. On both my laptop and desktop I often see the 'loading' symbol, and files often appear after the folder view has opened (they just appear all of a sudden). This happens with folders I rarely visit but also with folders I often open.
How are others' experiences? Can Nautilus be instant? Is this a configuration tweak or hardware issue?
i run ubuntu 10.04 on my old pc pentium 4, 500mb ram ,how can ido for make faster..
View 5 Replies View RelatedAfter installing ubuntu 9.10. It's now been a month or so from a fresh reinstall.
Currently for some reason at times my computer slows down where typing starts to lag.
Is there any software that would speed up the linux os. Like for windows there is softwares that would check the registery for errors and shortcut errors etc and fix them.
I use free software like that for windows and works well. I just would like to know if I can get something like that for linux. I know linux dosen't use a regsiter but just saying software that checks the linux system for any errors that could cause the computer to slow down.
I need a command to tell the alarm to start the playback of amarok on the morning, I also need a way to be able to see lyrics in amarok, and last, any tip on how to make the amarok launch faster? is takes like 5 min!
Amarok ver 2.3.0
Ubuntu karmic koala
Just installed fedora10 the first time, and the system wants to update, but the yum download process is too slow, it seems dead over 2 hours can't download one package! Is there anyway to make it faster?
View 8 Replies View RelatedWhen I haven't run yum for a little awhile, it's slow to start up because it goes through all the progress bars of downloading from different repositories. specially, just now updates/primary_db had to download 5.5MB.
Is there some way to automate this so it happens in the background and not when starting up?
I want to make transmission download faster. I have noticed transmission is a slow bittorrent.
View 1 Replies View RelatedI have an Ubuntu Server 10.10 install on a VIA C7 chip. It seems to pause for about 5 min on a USB component.
It is a fresh install, here is a snip from my messages log code...
My KB is USB, so I would rather not disable it if at all possible. The next time I can take it down, I will test disabling it though...
I am a GNOME user but because of the release of GNOME 3 i decided that i may have to start using KDE. So i installed KDE 4.6 from the qt-kde debian repository. It works more or less OK but i have a problem with the performance. It just doesn't feel as snappy as GNOME. For example if i have minimized Firefox when i maximize it it takes about a second for the window to draw and until then i just see and empty window. Or when i open nautilus it too takes a little to open and draw the window. Overall KDE seems a little unresponsive. Is this normal? And second, from time to time there seems to be huge performance issues - KDE suddenly becomes very slow - programs take a while to open, and the windows draw even slowlier than what i described previously. Also whenever there is a slowdown (like for example when i start a program) i hear some kind of scratching noises from a my laptop - like there is a heavy hard disk activity. I've heard that kind of noises before when doing something very demanding like compiling or archiving something.
Is there any way to make KDE more responsive and faster. I have disabled strigi and nepomuk.
I am running KDE on Debian Unstable with kernel 2.6.39-1-amd64 and NVidia driver 270.41.19 on a Thinkpad T61 laptop with Intel Core 2 Duo T9300, Nvidia Quadro NVS 140m and 4GB of Ram.
I find myself grepping the same codebase over and over. While it works great, each command takes about 10 seconds, so I am thinking about ways to make it faster.So can grep use some sort of index? I understand an index probably won't help for complicated regexps, but I use mostly very simple patters. Does an indexer exist for this case?EDIT: I know about ctags and the like, but I would like to do full-text search.
View 5 Replies View RelatedI put the KDE NOIPV6 in the /etc/environment file, but nothing happened it seems.
The problem = Midori / other browsers are too unstable with Flash; but Konqueror is lightning-fast with Flash and apparently takes up the least resources too. But the problem with that is, the aforementioned 20 seconds to 2 minute web page load time, even though I have 5-8 MBps cable Internet.
Midori is a little slow too to load web pages, now that I think about it, but faster once I have first visited a domain.
I use openvpn to connect otherwise isolated machines, and use samba to share filesystems across the vpn, which works just fine.But I recently discovered that copying files using rsync -e ssh is so much faster than copying from a mounted filesystem - like about 5 times faster.I've got comp-lzo enabled in both server and the client, at least I think I have, the directive is there in both the server.conf and the client.conf files, but how do I check that it's active?Does anyone know if I can make openvpn behave more like rsync, because copying is easier than rsyncing?
View 8 Replies View RelatedI've been working with Macs nowadays and noticed that programs load like "instantly" once it has been open and closed.
I don't know if MAC is pre-fetching them to somewhere but it is good to start Firefox right after you closed it.
what MAC actually does and how this could be implemented ? I have 6gb of ram on my laptop. Running Kubuntu 10.04 RC1.
How to make the system boot faster by removing the idle time between 5s to 10s? bootchart attached. It is Ubuntu10.04LTS by the way. One more hint, the screen black out for ~4s after "Begin: Running /scripts/init-bottom... Done." I don't know what is going on during that 4s, but my best guess is there is a way we can get rid of it.
Bootchart can be found here:
Firstly I've never (successfully) upgraded before using update manager -d but I've only tried once. I'm on 10.10 at the moment but I want to make a full disk backup using Acronis and try out 11.04 beta 1 so if I can't boot (like with the 11.04 Alpha 3) I'm ok.
What I want to know is if I upgrade to beta 1 it will install new things and settings, if beta 2 is released and I upgrade to that (after having beta 1 installed) will it overwrite all the settings again? Or will I be able to spend time set beta 1 up nice how I want it (if it works) and just smoothly upgrade gradually to final 11.04 keeping it pretty much exactly how I want it?
Also with the software sources, I understand I need to disable the ones I manually added before updating from 10.10 then to re-enable them, but how do I re-enable them for Natty as they are currently for Maverick? Do I just change the word Maverick to Natty, or is it better to remove and re-add them for natty? And do the authentication keys need updating or are they ok? I don't really know a lot about the keys.
1 more thing (sorry) will an upgrade overwrite any settings I have e.g. etc/fstab, sudoers, things like that? I know when you upgrade it gives you an option for some things e.g. keep or replace, if I keep old settings from maverick does it matter? Or does 11.04 add new lines/things to these files if I choose replace?
Sorry for all the questions, I'm pretty new been using ubuntu as my only OS for couple months now and most of my time has been spent tweaking settings and I don't want to lose them, or do a clean install when 11.04 final is released as I won't ever be able to remember them all.
When I open the "Options" of Skype, the camera can be recognized and there is video. But I don't know how to start a Skype video call. My Skype account is "dynamiccliu" if you want to add me and have a try the video call.
View 2 Replies View RelatedI have a strange problem with my skype beta (latest) and Pidgin (gmail account) the problem is when i make voice call, it works fine for 1 or 2 mins then the voice drops and it connects after 20,30 secs.
View 1 Replies View RelatedI am trying to use Skype beta on my acer aspire one with ubuntu 10.10. The video runs brilliantly and i can also here my wife from the other end but she cannot hear me. Apparently something is fishy with my mic input. I tried alsamixer and everything is in unmute. My alsa version is 1.0.23. The only think she hears is a loud hissing noise which is normally my bat voice but she doesnt need to know that. I can record my voice in the sound recorder but nothing comes out in Skype!
View 6 Replies View RelatedSo here's the schedule for 10.04:
April 8th, 2010 - Beta 2 release;
April 22nd, 2010 - Release Candidate;
April 29th, 2010 - Final release of Ubuntu 10.04 LTS.
If I have 10.04 beta 1, could I just continue to update and not have to burn another disk to install? Or do I have to burn the beta 2 and reinstall if I want it?
My update manager still says "updated 3 days ago" and no updates have come through today. Does anyone know if NBR has been automatically updated TODAY from Beta 1?
View 1 Replies View RelatedI currently have the Ubuntu 32 bit 9.10 installed on my laptop. I wanted to install WinXP 64 bit using VirtualBox. My question is: will WinXP 64 bit run faster on Ubuntu 64 bit than it will run on Ubuntu 32 bit (my current OS)? Is the upgrade from Ubuntu 32 bit to Ubuntu 64 bit worth it for running a virtual Windows XP 64 bit?
View 3 Replies View Relatedaccording to this article i read, its definitely faster. this is what i read: Since 64-bit systems can process twice as many instructions per second as a comparable 32-bit system, 64-bit systems are definitely faster than their 32-bit counterparts. it was from this article link: [URL]... Is this true? I always thought it wouldnt make a difference, besides more memory addressing?
View 9 Replies View RelatedI put together a p4 that has 3 slots for ddr memory and the specs say maximum memory is 2 G at 400 Mhz or 3 G at 333 Mhz. Now, I assume this means that if you install a third memory stick, it will run at 333 Mhz. Is this right? Which would be better out of curiosity?
View 5 Replies View RelatedI am using Ubuntu 10.10 64-Bit Desktop Edition, and I am looking for a faster way to rip CDs, without having to resort to Windows. I try to rip a CD, but it takes 20+ minutes just to get the files copied, then another 5 or so minutes to burn the cd!I have a new SATA interface CD/DVD burner, so I know it is not the hardware.
View 7 Replies View RelatedI am considering installing Linux on my workstation to develop and run fortran codes much faster than windows. I wonder if there is significant speed difference between Linux distros. Especially between Redhat and Ubuntu or Debian. I havent used any Linux distro longer enough to have an idea about its speed while running long codes.
View 5 Replies View RelatedI am currently backing up my data but find that it takes way to long to do a rsync, it takes forever to just find the differences and transfer them.Out of 3 separate rsyncs the main one that is slow is my www.skins.be mirror directory which is 41GB and has 392,200 files, sorted into multiple directories. Which grows by around 100 every couple days.I think that something that would be able to track changes by inotify time on directories will speed it up since Picasa sure finds the changes fast when I open it and it is tracking over 26,200 pictures. I just don't know of a backup solution that does that.
View 4 Replies View RelatedI need to find a fast way to copy a folder containing about 2 terabytes over my home network to another Ubuntu machine.In the past I have used RSYNC over ssh, but this is far too slow for this much data (probably the ssh encryption overhead slowing things down)I have looked at using SAMBA, but this seems geared for a mixed Linux/Windows network. Also I don't know if SAMBA will be appreciably faster.
View 4 Replies View Related
