When I boot up Ubuntu, it boots up fine. My question is when the login screen appears it takes a couple of seconds before the login prompt appears. I just wanted to know if this is a problem or nothing to worry about.
View 2 RepliesI just did a fresh install of Lucid on my desktop. The boot background splash screen comes up very fast, but then it is about a 1 minute wait until the login prompt appears. Then once I enter my login credentials, GNOME loads up ASAP. It wasn't this slow before I reinstalled. Anyone know why this could be? Everything works.
View 4 Replies View RelatedMy last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies View RelatedI have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
View 5 Replies View RelatedI have used Ubuntu since 7-4; I now have 10.4. However, in the last week I have been taken to the login screen three times. This could be potentially calamitous. Ctrl+Alt +Backspace have by default been disable since 9-4. There is no way I am pressing atl+Prtscr +K. I wonder if there is a new zap command in 10.4, and if so, how to disable it. I have never found the need to go back back to the login window. I am generally using the command line when doing this.
View 1 Replies View RelatedI recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
yesterday i installed slim login manager on my computer (eee pc 1018p, ubuntu 11.04), and now it cannot get passed the ubuntu loading screen (with orange dots underneath) when booting. i tried booting into recovery mode and that didn't work either. i also left the computer trying to boot overnight and that didn't work.
basically, during this loading screen that should eventually bring you to the login screen, i can alt+tab to see the progress of the load. the progress is stuck on
Is there anything I can do from grub to remove slim?or, is there any way I can access my ubuntu partition and save all my files?
I just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
I have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix.
did :
CTRL + ALT + F1 switch to one virtual console
sudo service gdm stop
[Code]...
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
View 3 Replies View RelatedI have program that work like Fedora Firstboot it's run only one time after finish installation. I have two questions to ask.
1. How can I start this application before gdm start (login screen or auto login)
2. How can I start this application in fix display resolution (800x600)
My method now is
(This is a part of script , this script execute from /etc/init.d/myfirstboot , I create symlink to /etc/rc2.d/S1myfirstboot for start it before anything)
gdm-stop # first time I use /etc/init.d/gdm stop
DISPLAY=:1
export DISPLAY
/usr/bin/Xorg :1 &
[Code]...
I don't understand why first time firstboot start the system will auto loging in but not complete yet and then my script is start and it's work does not fine I think that is another user is already login , but if I re run my firstboot again and again (by setting something that can revoke my firstboot and restart) it's work before auto login and every things is ok!
After keying in my passwort at the login, it takes exactly 26sec until the Desktop is ready. I have checked bootchart and it seems that the udisk-daemon is blocking the boot process for some reason. I have tried different disks, different memory, without dvd...always the same problem.
Last thing I did, was to put in the disk into another pc, different mainboard different proc and voila, it boots very quickly.
I suspect this to be due to my mainboard or proc.
Mainboard ASUS M4A78-E
AMD Athlon 7750 Dual-Core Processor
2x2GB DDR
Radeon HD 3300 Graphics
WDC WD5001AALS-0 500GB (System)
Seagate ST31000333AS 1TB(Backup)
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View Relatedbeen using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies View RelatedEvery account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies View RelatedThe graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
I've very new to linux, so please excuse my ignorance. I am trying to setup a number of servers to authenticate against my Windows Server 2003 active directory. I have successfully done this with one computer (Dell Optiplex 755), but I can?t seem to get it to work with my servers (Dell PowerEdge R710). I am using Fedora 11. I have setup samba and pam and have successfully joined the network. Everything with winbind seems to be working properly and I can get all the user info, etc. When I log in with a local account, everything is fine. If I try to log in with an account from my domain through SSH, I see the message Code:/usr/bin/xauth: creating new authority file /home/apkelley/.XauthorityAfter that, nothing happens and it is as if I haven?t connected to anything. If I try to log into the actual server using the graphical interface, it starts logging me in, shows a blank screen for about a second, and then returns to the login screen as if nothing has happened.I would greatly appreciate any suggestions for how I might fix this problem or how to find out more information about the error.Here are my smb.conf and system-auth files:
/etc/samba/smb.conf
Code:
[global]
[code]....
I am trying to load up the NVidia driver in Fedora 15 and am stuck. After boot up the graphical login screen comes up fine but when I go to log in I get an error message and it asks me to try to login again. I need to be able to get into text mode so I can edit some files but I do not know how to do this other that starting in multi-uder mode by editing /etc/inittab (or in FC15, editing some links in /etc/systemd/system/). Is there a way to get to text mode from the graphical loginscreen or do I need to get a rescue disk and startup in rescue mode to change files?
View 4 Replies View RelatedI installed a bunch of updates this morning and am encountering the following problem since I restarted after that:
After I login, the screen will flicker once and then return to the login screen. I assumed that something must be wrong with my graphic settings (as so often). So I logged in via Ctrl+Alt+F3 and checked the xorg.conf and Xorg.0.log for erros. Everything seemed all fine. I also ran
Code:
sudo apt-get install --reinstall gdm && sudo dpkg-reconfigure gdm as recommended in this thread. Also no success. I ran "sudo service gdm restart". That showed me at first a dialog box saying that my graphics card and input device settings could not be detected. I then chose to have a new configuration for this hardware created. This only resulted in the screen flickering for longer when I logged in again and then returning to the login screen.
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies View RelatedI am using Ubuntu 10.04.1 and I run it 24 hours a day. Recently one morning I went to my laptop and opened the screen but the login screen wouldn't appear. Anytime the cursor appeared, HDD activity would go to 100%. I'm assuming this because the HDD light on my laptop was permanently on. So I made the dumb decision of just holding the power button down and turning it off. When I turned it back on, I noticed it came to a command prompt type screen listing "initramfs" at the bottom apparently wanting me to input a command. I did a lot of research and couldn't find much of anything that would help me. I read about GRUB, superblocks, fsck, e2fsck, etc.. . I tried all of those and nothing has worked so far. Any ideas? I did notice one thing. When I went into the actual install with the livecd, it told me the drive was /dev/sda5, but in Disk Utility on the livecd, it told me it was /dev/sda1
View 9 Replies View RelatedI've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
View 9 Replies View Relatedi have installed xubuntu desktop on my Ubuntu PC. But now the login screen and the bootsplash screen are showing Xubuntu logo etc . How do I fix this?
View 3 Replies View RelatedWhen I login to ssh enter username then it takes quite a bit of time before password prompt comes up.
View 2 Replies View RelatedI'm having a bit of an issue. I was transferring some files from an external hard drive onto my desktop computer running ubuntu 10.04...It filled up the hard drive to the max, rebooted and I couldn't login. Did some googling and thought it might be because it was too full so I plugged the ubuntu HDD into my laptop, removed some files and tried again. Still no luck.
What it does is tries to automatically login (that's how I have it set) at the main login prompt, it for some reason is not able to and the screen flickers a bit and shows the login screen. I enter my username and password and it flickers really quick and goes back to the login screen. Does this for my other user account as well. I can login via the command prompt (ctl-alt-f7) and do stuff there, but I cannot login to the GUI.
i used to have 9.10 but now upgraded to the latest version. Back then I changed the background to full black for both the preboot screen and login screen.Now after upgrading it changed it to the purple color screen. I am wondering how I can change back the background color?
View 1 Replies View Related