Ubuntu Installation :: Redirecting Grub 2 (Bootloader) Menu Entries
Feb 23, 2011
I'm familiar with Ubuntu and the like, and have GRUB 2 installed as my boot-loader. I was wondering if there was any way to get one menu entry to be re-directed to another. Specifically, whenever I select my third menu entry, I want it to execute the code on menu entry 10. My reason for doing this would be that after customizing my GRUB 2 menu, I came into the problem of updated kernels. Basically I would like a single "Ubuntu, Latest Kernel" entry that always redirected to menuentry 10, where my latest "Ubuntu, linux 2.6.xx-x-generic" entry is. In order to temporarily solve my issue, I've set my "/etc/default/grub" file's "GRUB_DEFAULT" to "9", although I'd rather not do this.
Since I've been using Ubuntu, I've noticed that new entries for Ubuntu (the same but with the final number changed) occasionally appear in the Grub 2 boot loader. I'm talking about the first two entries in this picture, compared with the third and fourth entries here:Two questions:1. What are these entries? They appear to simply be the same OS but different versions. Are they generated when Ubuntu updates?
# # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # .....
Every time update-grub run all these are put back. Editing grub.cfg does not help.
For the past few weeks I have been using the lastest Ubuntu OS. The following menu pops-up during the boot process.
GNU GRUB version 1.98+20100804-5ubuntu3 Ubuntu, with Linux 2.6.35-22-generic-pae Ubuntu, with Linux 2.6.35-22-generic-pae (recovery mode) Memory test (mentest86+) Memory test (mentest86+, serial console 115200) Windows 7 (loader) (on /dev/sdb1)
Just recently the menu displays duplicate entries. The first two entries are repeated (see below). What might have caused these duplicate entries to appear and how to correct them? Before this problem occurred I did not issue any sudo commands.
GNU GRUB version 1.98+20100804-5ubuntu3 Ubuntu, with Linux 2.6.35-22-generic-pae Ubuntu, with Linux 2.6.35-22-generic-pae (recovery mode) Ubuntu, with Linux 2.6.35-22-generic-pae Ubuntu, with Linux 2.6.35-22-generic-pae (recovery mode) Memory test (mentest86+) Memory test (mentest86+, serial console 115200) Windows 7 (loader) (on /dev/sdb1)
I am using ubuntu 10.04 and I would like to keep only the main menu,and i have to disable all the other options including recovery and memtest in the GRUB menu..How to do this..?
I'm running Ubuntu 9.10 dual booted with Windows XP. Ever since I installed 9.10, I get a long list of OS's (actually, multiple repeats of what appears to be the same Ubuntu install), and I can't get rid of them.I've looked through various tutorials and the GRUB 2 Community documentation (https://help.ubuntu.com/community/Grub2) but I still can't get rid of the menu items.I edited the 40_custom file and was able to add the entries I wanted to see, and then chmoded 644 all the other files in the /etc/grub.d directory and run update-grub.The custom entries do appear at the end of the menu now, but the old entries are still there as well. This is what I get when I run the update-grub:
I have two leftover entries in the Grub2 menu after running update-grub. One is leftover from an Ubuntu installation under Windows 7 referring to a Vista boot. Never had Vista on my system, and if I were to select this option it will lock my computer. Same deal with an older Jaunty boot option - as I have identical worded options one good and one dead option.
If I have to live with these two dead selections on my Grub2 menu I will. But I'd rather get rid of them. I don't want to use an old tool for Grub editing that is no longer workable for Grub 2.
I've got a dual boot PC with windows 7 & Ubuntu. I had installed Ubuntu 10.04 & recently upgraded it to 10.10. Now I have these entries in the boot menu.
Ubuntu with linux 2.6.35-22-generic Ubuntu with linux 2.6.35-22-generic (recovery mode) Ubuntu with linux 2.6.32-21-generic Ubuntu with linux 2.6.32-21-generic (recovery mode) Memory test (memtest 86+) Memory test (memtest 86+, serial console 115200) Windows 7 (loader) (on/dev/sda1)
First & second entries listed above don't work. How can I remove them safely?
i have been running Kubuntu 10.04 on my primary hard drive, and i have a second 1.5TB HD that i use for storage. so shrunk the secondary HD partition and created a second 50GB partition and i installed Ubuntu 10.10 on it and told it to rewrite the mbr on my primary HD. Where i am at: i took the menu entry from my Kubuntu "grub.cfg" and the entry from my Ubuntu "grub.cfg" and put them in the 40_custom file. so now when i boot-up my computer, it shows both installations at the bottom of Grub2s menu list. with all the menu entries that Grub automatically adds.
What i would like to know is how do i make it so that the Grub2 menu only shows the entries that i add to the 40_Custom file and not the randomly generated list aswell.
I installed Ubuntu in a dual-boot with Windows 7, and installed the bootloader (GRUB? However, I have some weird Windows XP Embedded entry! I also have a lot of different boot options for Ubuntu. All I want is my Windows 7 entry (picked up as Windows Vista) and my main Ubuntu entry. How can I edit the bootloader entries (remove some existing ones, not adding any) so I have only two on there?
Updated to 10.04 OK except for a couple of things. No sound icon on the task bar and it's not in the 'add to taskbar list'. Not a major problem, just put it in the 'start programs section'.Annoying thing is after selecting from the grub boot menu, the machine seems to be suffering some indesision as the cursor sits on the top lhs of the screen flashing and the screen modulates between various degrees of darkness. Then the machine boots OK. Certainly slower than karmic - not quicker as reported. Seems to be some conflict happening. There is a duplication of the kernal entries for default and safe. Mabe this is the problem. I have run update-grub2, but it keeps giving me double entries.
I recently installed Fedora on a triple boot system with Winows XP and Ubuntu JJ. how to add Ubuntu's grub to the bootloader. Here is the output of Fdisk -l.
[root@localhost rabbit]# fdisk -l Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
i had a dual boot xp/ubuntu first. later i had to format and reinstall xp. this deleted the grub bootloaderplease let me know, how to fix this! please make it simple . i have the live cd, but i don't have internet connectivity in ubuntu.
I installed Ubuntu and Windows 7 on my computer. I first get the Windows bootloader telling me choose between Windows or Ubuntu. If I pick Ubuntu, I then get a GRUB loader telling me to choose between different versions of Ubuntu and Windows 7. How do I remove GRUB and just use Windows bootloader?
I have so many entries in GRUB and have to actually scroll down so much to see windows entry. How do I remove unwanted entries in GRUB? Also How can I make a background picture appear when grub manager comes up?
i've been using ubuntu with wubi, and I'd like to install it on my new hard drive (so windows is on one hdd and ubuntu is on another). afaik, grub will be installed on the hdd w/ ubuntu, and i have to set it to recognize the other (windows) hdd. assuming that i want to get rid of ubuntu and just use windows, what steps do I have to take to do so? (if grub is only on the ubuntu hdd, then would I just have to format it?)
When I try to boot into windows through grub it just returns to the grub menu.also system recovery options from bios just end up in grub screen too.here is boot script.From reading forums I think I need to get grub out of windows partition but I don't know how
Anyhow, I'm a n00b to the Linux world, so I installed it on my Windows 7 desktop to dual boot. Current configuration is as such:160GB HDD with 3 partitions: Ubuntu Studio 10.10 on one, Win 7 on another, and the third is for storage.1TB HDD for extra storage.So far, all is well, but I'm not pleased with the default GRUB options and layout. It gives me 4 options to choose:
-Ubuntu Studio -Memtest -Memtest Debug Mode (or something to that effect)
I have a grub menu with a ton of old kernel entries that I want to delete. I've scoured this forum, and haven't found anything that works. I've tried:
Code:"the easiest way to get rid of old kernels from grub is to uninstall the package, the post-install scripts will update grub
for example my current kernel is:
uname -a Linux hemma 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 x86_64 GNU/Linux
then remove older kernels found in /boot like this:
sudo aptitude remove linux-image-2.6.31-15-generic" When I tried that, the output showed the package being removed, but nothing was removed from the grub menu. I tried running the kernel I supposedly removed, and it wouldn't start, which is promising, but how do I get it out of the grub menu? I've also tried using Synaptic, but that didn't work either.
Just got done installing F14 64 and all went well however when I rebooted the machine it boots straight into windows, where is my GRUB boot loader? Only one drive in this machine (sda) and I remember going through the GRUB settings during the install. How to get a bootloader working now because in my linux experience (since RH5) it has always just installed the bootloader and worked. Apparently ext4 is bunk for me and when using LVM settings. I am up and running and grub is working.
Basically, I used a USB stick to run ubuntu 9.10 live, then tried to install to an external 500gb HDD connected with a Sharkoon Drivelink USB adaptor. The installation went fine, but I get a GRUB error 21 when booting a lot of the time. I figure this is due to the way in which the drive is connected. I am a complete noob, and I want to just ove GRUB completely and restore my Vista bootloader. Unfortunately, I do not have an installation disk as my laptop didn't come with one, and none of the others I have other PC's are the same version (home premium 32-bit).If you know of a way to fix the GRUB issue/sso I can use the external drive I would love to hear them too, but the main aim of this thread is to help me remove GRUB and restore the windows bootloader. If any more information is needed, just ask and I will provide it.HP Touchsmart TX2-1010Windows Vista Home Premium 32-bitExternal HDD:Seagate Barracuda 7200.11 SATAII (with jumper set for 150mbps)
I currently dual boot and wish to know how to remove the Windows partition/drive while still allowing Ubuntu 9.04 to load safely as my main OS. I know how to restore windows partition by;
If MBR gets damaged boot from MS Windows Xp disc, Select "R" for "recovery console", select main windows installation drive (admin password usually nothing, just press enter) and type "FIXMBR" this will allow you to boot windows again, but Ubuntu partition will be unbootable and require installing ubuntu again to dual boot.
But this leaves Ubuntu partition Un-bootable as it removes the grub menu, how would I do the same for Ubuntu and make window partition un-bootable so I can remove it?
I had installed ubuntu, then windows xp, surprise surprise I lost the boot loader for ubuntu. I have 2 different live boot cd's one for 9.10 and another for 10.04. My PC would be running 10.04, if I could install grub. When I go to help on the live boot disk menu, it tells me that rescuing a broken system is not enabled on either disk, though I downloaded a full copy of the disk when I downloaded it. What can I do to get grub back onto my computer? I deleted the XP partition hoping that would help. It didn't now the pc will only boot when I have the live boot cd.
I currently dual-boot XP and Debian sid. I currently have XP on /dev/sda1, sid on /dev/sda2 with /home mounted separately on /dev/sa3, swap is /dev/sda4. I have free space in both sa3 and 4, mostly in 4, of course. What I'd like to do is add a third partition, either with or without a separate home mount, but have my current grub2 still be the bootloader. I'm thinking I'll give a total of 33 G to it (I keep almost nothing on my hard drive, it's all on the cloud). I want to install Kubuntu and try it out, I've burnt the Live CD and it's very cool.
I just want to ask if there is a way to make grub bootloader automatically boot to ubuntu every start up. And only make the bootloader appear when I press a certain key(ie. F7) so that I can boot to windows when I do not want to boot on Ubuntu.
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
I cannot boot into by Ubuntu 9.1 machine.... Trying either GUI or rescue mode gives me the following error messages (which i copied by hand since they were in cli)
Code: mount : mounting /dev/disk/by-uuid/64e5cb0d-058a-4a4c-af4b-7afb6427a72e3 on root failed : invalid argument
mount : mounting /sys on /root/sys failed : no such file or directory mount : mounting /dev on /root/dev failed : no such file or directory mount : mounting /proc on /root/proc failed : no such file or directory
Target doesnt have /sbin/init The only thing i remember doing before this is deleting some bootloader files... but they were on another disk so I didn't think that it would affect my ubuntu install. Guess I was wrong how I can recover my system?
I want Truecrypt to ask for password for Windows XP as usual but with the standard [ESC] option, on selecting that, i.e via Escape key, I want it to find the grub for the (unencrypted) Ubuntu install. I've installed Windows XP on the 120Gb hard drive of a Toshiba NB100 netbook then partitioned to make room for Ubuntu 10.04 and installed that after the Windows XP install. When I encrypt Windows XP, Truecrypt will overwrite the grub entry in the master boot record (MBR), I believe (?) and I won't be able to choose between XP and Ubuntu anymore. So I need to restore it back.
My setup:
Partitions: Windows XP, NTFS (to be encrypted with Truecrypt), 40Gb /boot (Ext4, 1Gb) Ubuntu swap, 4Gb
[code]....
The key area of the problem is how to instruct Truecrypt when escape key is pressed, and how the Grub/Ubuntu can be made visible to the truecrypt bootloader to find it, when the esc key is pressed. Also knowing as chaining.
I got a system crippling virus on my windows installation. My recovery disks gave me the same problem. So I installed Win 7 enterprise using a disk my dad got from his work. The installation went smoothly. When I started my computer after it went straight to Win 7 without the GRUB bootloader (not the case with restore disks). Could somebody please help me with this issue because I cant stand using Windows for anything other than games much longer.
I thought it would be cool and easy to install Windows 7, ended up being a headache and worthless so far. Now I only have the windows bootloader with vista and windows 7 as options. How can I get grub going again? I have all 6 fedore core 10 cds and a live cd in case those will help, I am using the live cd to play in fedora right now, but I am not sure how to get access to grub.conf and what to change in it, because I am pretty sure I have to add Windows 7 to it.
