Ubuntu Installation :: Neither 10.10 CD Or USB Install Works
Dec 5, 2010
This is an existing bug (https://bugs.launchpad.net/ubuntu/+bug/636711) but since there doesn't seem to be too much happening over there, I thought I'd post this development here to see if anyone can make something out of it. Basically, any attempt to launch a (MDSUM-confirmed) CD or USB image of 10.10 will fail on certain computers. The install process fails, leaving a message like:
Quote: mount: mounting /dev/loop0 on /filesystem.squashfs failed: input/output error
Now here's the new development. I have two nearly identical Compaq Evo desktops at the office and one fails as above while the other loads and installs 10.10 perfectly (using the same USB disk). I would imagine that this would make a good test case for the bug, so I've posted the lshw output from both machines (one running 10.10 and other running 8.10) here [URL]
View 2 Replies
ADVERTISEMENT
Nov 14, 2010
If I run Ubuntu 10.4 LIVE from CD everything works fine. However, when I try to install, it hangs up at about 23% (while installing Firefox). I thought my HD had a problem, but the same happened after checking it had no bad sectors and even after replacing it. Same as above using a CD of version 8.4 ( live works, install doesn't complete). Same trying the Alternate in place of the Desktop edition. With the same CD's I already installed successfully on other machines. Booting from USB SHOULD be possible ( according to BIOS settings ) but apparently it doesn't work.
Present machine characteristics :
AMD Athlon 2200+ 1.8 Ghz
512 MB RAM
HD EIDE 40 GB (Master of the Primary channel)
BIOS AMI dated 13-05-2003
Motherboard : no brand
Two EIDE CD drives (as Master and Slave of the Secondary channel).
View 3 Replies
View Related
May 23, 2010
My first upgrade attempt to 9.10 ruined my install - there was no return and as 9.10 would not install either, I reinstalled 9.04 and everything was as expected.I decided to wait for 10.04 hoping the issue had been solved - unluckily it has NOT. Neither Live CD 9.10 nor 10.04 work. New Mint does not work either - to closely related to Ubuntu, but Suse live CD does. Played around with findings from different threads - like taking out "quiet splash --" and adding modprob parameter to no avail Prime suspect is HD and HD controller (ATA/PATA) - but I could not nail it.
View 3 Replies
View Related
Oct 10, 2010
I have this problem where the 10.10 LiveCD 64-bit works (as in I get full resolution display and no video issues at all). But after install, the OS boots successfully but there's no display. I know it's successful because I was able to login in the dark (sound works).
Here's what I have:
HP m9340f (NVIDIA GeForce 9500M GS with HDMI)
46" Sharp connected via HDMI
Windows 7, works fine.
Here's what I tried with no luck:
1. CTRL-ALT-F1 still doesn't show anything on screen, no terminal
2. Connected via VGA
3. Connected another 17" monitor via VGA, rebooted
4. Added vga=789 in grub before booting
The weird thing is that I had 10.04 before and it was working for a while then it suddenly stopped working. I figured I'd wait until 10.10 but I now have the same issue. I haven't tried 32-bit... I can give that a shot in a bit.
View 5 Replies
View Related
Feb 6, 2011
Im trying to install Ubuntu, here are my problems and the solutions ive tried: I've downloaded 10.10 in 64 bit and 32 bit. I've also tried with 10.4.1 LTS.I've tried burning it to a disc and i've tried making a bootable USB. (I ran out of dvds so im only trying from usb now).I load from the disc/USB and ill get the menu asking if i want to try ubuntu, install ubuntu, check for errors etc..... I choose try ubuntu and ill get the UBUNTU logo with the loading dots undernieth.The screen then glitches and theres multicolor lines frozen accross the monitor. Stuck that way until i restart.This also happens when i try to install it to the harddrive.It happens on both versions in both 64 and 32 bit. I checked the disc and all files are present.I've had ubuntu installed over a year ago.
AMD 64 3200 processor
nvidia geforce 7800gt
2gb ram
What should i do? Heres an image i took with my phone. http:[url].....
View 2 Replies
View Related
Feb 10, 2011
No Bootup just a Black Screen with a frozen cursor after install, but LIVE CD works in 1024x768 mode? Well, I have a Sony Bravia 32xTV with HDMI input coming out of a ZOTAC nvidia type of card. The live CD will recognize the HDMI graphics card and Sony TV/monitor and thus works like Ubuntu normally does. But when I go to install to a hard drive and try to boot up I get just a Black Screen with a frozen cursor. I even have another Ubuntu 8.04 version running on the Sony Bravia TV , so no problem with TV end of things. what do I do now, oh great Ubuntu gurus out there in cyberland? what could I possibly do , what do I read, where do I go , what, where, who, how, when ,which way?
View 9 Replies
View Related
Jun 15, 2010
I had some issues with Wubi installations of Ubuntu, so I figured out how to create a LiveCD and to install from the CD. I am working on Linux now and I am having no issues as far as the Penguin goes. I hash-checked the iso and used older CDs more suited for booting.I chose to install from the CD, and I selected the option which partitions and installs Linux alongside Windows. I was prompted to import some user folders from my Windows Vista, and I agreed. These appeared in Linux and also work fine.
However, after a few hours of messing with my new Linux, I restarted and I realized all I have in my boot menu now are some Linux options, memory test, and a Vista loader & vista recovery. I had intended to have a dual boot system. Did I delete my Windows without meaning to, or can I change the bootloading process somehow to include both Linux and Vista?
Upon selecting the Vista Loader, I was asked if I wanted to recover my files, etc. I refrained because I wasn't sure what the effect would be on Linux. Is there a way to have both Vista and Linux show up normally in my boot menu, or will I have to go back and forth recovering every time I chose to use the other OS?The only reason I still want to use Windows occasionally is because I had Maple software in Windows which was useful for school.
View 9 Replies
View Related
May 17, 2011
I switched from windows to Ubuntu 10.10. But I'm not getting along with it as well as I expected I would Specially cause I'm not getting the best out of it due to limited web connectivity. I used to use a usb WiMax modem back in windows (which is also supposed to be supported by linux as my service provider said) for internet. But I'm having a hard time configuring it on my Ubuntu. The modem works fine but I'm failing to install the drivers [url]. I used my cell as a temporary modem to get help from the web.
I downloaded:-
i2400m firmware 1.5.0
WiMAX Tools 1.4.5
WiMAX Network Service 1.5.2
According to the documentation, I'm supposed to install the linux kernel 2.6.35 which Maverick comes with anyway.
Then comes the part to install the firmware. The command I used was
Code:
But unfortunately and annoyingly the result is
Code:
I didn't get it. Am I missing any package or something?
View 1 Replies
View Related
Jan 23, 2011
well I'll start by SPECS.
Processor: amd phenom II 965 BE
Motherboard: M4N78 PRO (Asus) newest bios
Memory: Corsair 2gb DDR2 800mhz X2 (4GB)
Video Card: Radeon 5750 1GB
Power: 620W Corsair.
HD: 320GB
I use the TV + HDMI cable. Versions tested 32BITS/64BITS (stay with x64) has no disk error. already downloaded several times. MD5 is correct well ... I'll start here with my concerns ... version 9.04 onwards does not work gives blackscreen. I think "forgotten" by the generic drivers for ATI or something that influences the video. it does not show. 9.10,10.04,10.10 none of those versions worked ... on other computers functioned normally. I found researching how to dribble and go to live. and thus unable to install. but does not work after the pc restarts. Linux does not. shows nothing ... goes to black screen with the (- FLASHING) but nothing else happens.
View 2 Replies
View Related
Jun 17, 2011
I just installed 11.4 via the net install cd. In the configuration step, the internet connection test fails. Why would this happen if I just installed opensuse using the internet? It looks to me as if opensuse can already figure out how to use my network card. I went ahead and skipped the test, but it still doesn't make any sense to me. Let's see if internet works once I'm logged in...
View 2 Replies
View Related
Mar 28, 2011
My commands like
ifconfig
nano
etc dont work in terminal. This is my first attempt trying openSUSE and I have been using ubuntu, linux mint and backtrack 4 r2 before.
View 6 Replies
View Related
Aug 18, 2011
I have a Dell Inspiron M5030 and ran the live Gnome CD. everything works until I install. The install goes fine and it boots fine but when i log in it just hangs at the desktop with a spinning cursor. No menus no nothing just the wallpaper?
View 2 Replies
View Related
Jan 13, 2010
using ubuntu and the corporate edition of open dns? >Im curious to find out how the anti malware filtering works in open dns works.
View 4 Replies
View Related
Aug 29, 2010
I just want to be able to copy the files from a cd that is only compatible with windows to and new cd that is compatible with ubuntu
View 9 Replies
View Related
Jun 12, 2011
just joined the forum so I am a little lost. I am trying to get my wifi to work on an HP Pavilion tx 1115nr (tx1000 series). I am using Ubuntu 10.04 desktop, my network card is BCM4311 rev1.I have read many threads and tried about everything, but I am so close. I can load bcmwl-kernel-source from the software center, restart and my wifi works for that startup. If I restart my computer again, it no longer works. I can then remove bcmwl-kernel-source and reinstall it and it works just once again.I have blacklisted b43 and ssblsmod reveals that these modules are missing after restart when wifi doesn't work:
arc4
lib80211
lib80211_crypt_tkip
[code]....
View 6 Replies
View Related
Oct 10, 2010
I'm installing 10.10 netbook on an older Pavilion ze5500, and the install process finishes, asks me to reboot, ect. After reboot, everything goes swimmingly until I try to move the mouse over the sidebar or toolbar at the top, where the screen flashes to black, then just the wallpaper, then the full GUI loads again as if I had just logged in. This repeats over and over until I tapped the power button, then I worked my way to the restart button on-screen, and the system restarted just fine.
View 2 Replies
View Related
May 21, 2011
I got hold of the 3 cds needed to install full 32 bit Slackware 13.37 It installed perfectly and all is configured and running very smoothly. I have 4gb of RAM in my laptop so compiled the 2.6.38.4 kernel with PAE support and slackware sees 4gb of RAM. It will really be mission for me to get hold of the 64bit ISO as I do not have have uncapped bandwith (3g - UMTS).Will I really benefit by installing the 64bit version, and if so how?
View 14 Replies
View Related
Aug 10, 2010
I am trying to understanding package tools in ubuntu. After I read some documents on internet. I did some exercise myself. And I got some questions. I installed fex package.
Code:
# aptitude install fex
Reading package lists... Done
[code]....
View 6 Replies
View Related
Jul 8, 2010
I've got a problem in doing sudo working for mounting things (e.g. usb pen or optic discs). Details:The OS: Slackware 13.0The response to sudo -l command:
Code:
User user1 may run the following commands on this host:
root) /sbin/shutdown -h now, /sbin/shutdown -r now
[code]...
View 3 Replies
View Related
Jul 28, 2010
i followed the instructions on [URL]..ng-138783.html and now it was installed at /usr/java/jdk1.6.0_20
When I tried to use javac to compile, it said "javac: command not found". then I added the following code into /etc/profile
Code:
JAVA_HOME="/usr/java/jdk1.6.0_20"
export JAVA_HOME
but it didn't solve the problem.
And finally, i found this http://www.crazysquirrel.com/computing/debian/java.jspx
but when I tried to use
[Code]...
View 5 Replies
View Related
Jun 12, 2011
Per the HowTo post a Wireless Issue Sticky, I have included the information in the 10 steps below.Here is the description of my problem: I am getting back into Linux after purchasing a new PC (have not owned one personally for several months). I purchased an HP, as I've had personal success with them. It is an HP Pavilion g4 Notebook.When I booted the Live CD, I was pleased that wireless just worked.However, after installing, wireless does not work.The Additional Drivers Tool appears to recognize my wireless card;however, when I attempt to active the driver, I receive an "installation failed" dialog.ere are two screenshots:And here are the results of the file from the second screenshot:
Code:
2011-06-12 11:04:58,837 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[code].....
View 9 Replies
View Related
Jan 27, 2010
I've played about with Live CD's and sort of got it working on a PS3, but that's about it. Now, my problem.
Basically, what happened is that I installed Ubuntu 9.10, and then I installed whatever updates it wanted, and then ...17-generic pops up, but doesn't do anything other than load up a terminal type thing full screen.
Here's everything GRUB says.
Quote:
I'm pretty sure it's supposed to be part of the updates I did, but to be completely honest I'm not even slightly certain.
I don't know if there's any more info you'd need from me about my computer, but if there is could you tell me how to find it.
So the questions I'm asking really: Is meant to be an updated version? and if so, How do I make it do what it's meant to do?
After installing Ubuntu my Windows XP BSOD's on startup. I have posted in a Windows forum, but they seem to be terrified that I've used the word "Ubuntu" or maybe I'm being plain impatient. Do you know of anywhere which specialises in dual-boot problems or something? Thanks again
View 3 Replies
View Related
May 8, 2010
I made a USBbootdisk and installed 10.04 the day the final release came out. I installed it, used this post install guide http://blog.thesilentnumber.me/2010/...de-what-to.htm, and it has been working like a charm since then. When I went to log on to it today, the log in screen comes up as normal, I enter my password, ubuntu thinks about it for a minute, and then sends me right back to the log in screen.
I have an Asus EeePC 1005, dual booting Windows 7 Starter/Ubuntu 10.04
I just want to see if this is fixable before I wipe the partition and reload ubuntu.
View 2 Replies
View Related
May 19, 2010
I have been using ubuntu and kubuntu now for about 2-3 years non-stop, and I was originally a windoze user, so please bare with me.. I'm not a god at this stuff.The previous couple of versions of ubuntu I have been using, have had a few glitches after their immediate initial releases, so I have come to the conclusion now whenever a new release is made there will be issues for a while until someone figures them out.As I am sure most of your are aware, during bootup of either ubuntu 10.04 or kubuntu 10.04,we will catch little bugs .. they will interupt the new plymouth splash theme for a moment, and then the system will boot as a normally. Kubuntu was a little worse, after using remastersys to create a bootable live disc.. It seems that during the bootup of the live disc which I have created with remastersys using originally a fresh install of Kubuntu I see "Bios xxxx-xxxx errors" (I'm not 100% sure what they say, because they go by pretty fast) and I just don't know how to freeze the screen long enough to report exactly what is telling to repeat them here.. The bug that I get normally during bootup of Ubuntu is "Glib error" something to do with "non valid user".. Every-time I have installed it on my system or Virtualbox from a fresh install - after doing the updates and putting everything on it that I normally like to have for applications and codecs etc, I will start to see errors eventually creep into the Plymouth boot splash process. And I guess if there is no solution at this point, I would like to keep the 10.04 and revert back to 9.10's splash screen and back to when there were no errors.. Is this because of the new graphical drivers in 10.04? Any idea why is it is bad?
I doubt for some reason that I am the only user with these issues on a fresh install of either Ubuntu of Kubuntu, and I just want to know to know if there is anything I can do to help? I don't seem to find maybe people out there reporting this.. Maybe for the fact that we can't stop the screen from progressing to the next stage of bootup long enough to copy the errors to post them here. I don't know, but AFAIK the last version of ubuntu and kubuntu didn't have these problems with bootup.. Maybe with flash.. or maybe with something else. And many of those previous problem with solved with work-around, and just using different software or drivers or whatever.Again is there anything I can do to help? And how to stop the screen long enough to copy down my hand the errors I am catching during bootup? Or is there already a solution at this point to switch back to a older splash from 9.10 available, because in my opinion, the system is running flawlessly for my purposes, except the splash screen is coping errors I have never seen before since I first began using Ubuntu or Kubuntu
View 1 Replies
View Related
Jun 17, 2010
I'm having the following issues with my laptop -- left ALT key never works. ever. that means I have to do shortcuts with the right ALT key which irritates me.- right click on trackpad works sporadically, and only after I push it a few times. most of the time, it doesn't work.This issue has popped up since Jaunty beta and has never been totally resolvedOutput of uname -aLinux tarantino 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux
View 1 Replies
View Related
Aug 1, 2010
Have recently updated 10.04 with latest updates which included a new kernel and the printer no longer works. In-fact I can't even define the printer and I don't have a printer installed, the install script can't locate the printer on the USB. I have a cannon MP640.
I can print OK through windowsXP on virtualbox, printer is found OK.
Everything was fine until latest update.
Also my USB TV card doesn't work anymore, it also was OK before the update.
View 8 Replies
View Related
Sep 9, 2010
Does the current programs which we can install from apt-get from ubuntu servers for 10.xx , Are they still supported on older version of ubuntu like 9.xx?
View 4 Replies
View Related
Oct 14, 2010
i recently made a startup disk for 10.10 on my external usb drive. i booted up using the usb drive and installed as normal except now when i want to use ubuntu it only works if i select to boot using the same external usb drive. i made sure to select the laptop's HDD for installing ubuntu, so i'm not sure why this would be.
View 5 Replies
View Related
Feb 10, 2011
Fresh install AMD64 10.10 alternative (for RAID). No mouse will work. I have tried 3. My old optical M$ PS2 / USB mouse that I have had for years, that worked fine on Lucid yesterday before wipeout and clean install. dell cheapo usb wheel mouse and apple pro mouse usb. all light up like they want to work. LSUSB shows them. Dmesg shows them when I unplug and replug. The mouse cursor is there but will not move.
View 2 Replies
View Related
Apr 1, 2011
I just got a new SSD and installed Ubuntu on it. Since the installation I am encountering regular freezes. By now, I cannot point out any regularities. I still can move the mouse, but thats it. I cannot access the terminal, no key comination works. I can only reboot by turning off the power...Since I am quite new to problem handling on Ubuntu (til now everything used to work fine)
View 1 Replies
View Related
