Just installed my first ever linux distro in my life and sad that i did not come here before. Anyways i have a WD Green 1TB External HDD. I have Ubuntu 10.04 Lucid Lynx Installed and i want it to mount my HDD as soon as my PC starts up.Quick Q: How much time does it take for any USB device to get recognized on ubuntu. Takes me more than 2 minutes compared to a few seconds on my windows i had before (same machine)
View 9 RepliesI want all my external drives mounted when I start OS.I don't want to do it for a specific external drive. I want my external drives mounted by default.o you have an idea? Does linux have such a configuration I can change?
View 8 Replies View RelatedI want to install Ubuntu onto a partition on my external hard drive, but my CD burner is broken so I can't just boot up with a live CD and do it that way. So can I install Ubuntu onto my external hard drive with the Startup Disk Creator that comes installed on Ubuntu? And if not is there another way I can do this?
View 1 Replies View RelatedI just switched to Debian 6 from Mepis 8.5. When Debian loads, it doesn't recognize or mount my external hard drives.
View 4 Replies View RelatedI want to mount external hard drive using fedoracore 15 on a Verbatim 500 GB.
View 1 Replies View RelatedI am struggling with getting an sshfs mount mounted on system boot. I have a script that mounts the sshfs for "userA". When userA runs the script all is well - user A can access the remote filesystem, root user can't see it as expected. The basic command is: sshfs userA@remote host:/home/userA /home/userA/mountdir -p 21212 -o password_stdin < passwordfile. I can prepend the sshfs command in the script with su - userA -c and when I run this script logged in as root all is well, userA has access and all is well. If I then put this script in /etc/init.d and reference it properly in the rc. directories the mount doesn't happen. If I prepend the sshfs command with sudo, same thing. Logged in as root I can run the script and UserA has access. Run the script in /etc/init.d during startup and the mount doesn't happen. Echoing text to a log file shows that the script is being executed but no mount happens.
View 4 Replies View RelatedI have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
I just bought a DLink 323. I have fun_plug installed and ssh enabled, and it works great.I am having trouble mounting the NAS to an actual location (i.e. /mnt/dlink) I've added the following line to /etc/fstab.
View 4 Replies View RelatedI want to have a secondary hard drive mount at boot, mainly because it happens to be the home drive. But I have to manually mount it after I boot.
Any way to get "places" to mount on startup under 10.10?
how to set auto mount at startup. I have 3 partition how can i auto mount this partition at startup.
View 7 Replies View RelatedAfter reformatting a usb drive with gparted, no usb stick will automount when I plug it in anymore. If the usb is in place at startup, however, it is recognized and mounted.The media will show up in fdisk and disk utility, but there is no link to it in Places > Computer. I have no trouble manually mounting, but I would rather not have to go through the hassle each time I plug in my flash stick. I am running Ubuntu 10.10 64bit
View 1 Replies View RelatedJust bought a new external and usually i would be able to mount things but i cannot log into GDM so im suck doing it in the terminal like thing. so far i have tried:
Code:
sudo fdisk -l /dev/sdb
Code:
sudo mkdir /media/usbdrive
sudo mount -t msdos /dev/sdb1 /media/usbdrive
but when i do that is says
Code:
FAT: bogus num of reserved sectors
mount: wrong fs type, bad option, bad superblock on /dev/sdb1
comp: Dell Inspiron E1505
OS: 9.10
HD: Segate Free Agent Go 320GB
I'm new to Linux. Currently installed Ubuntu 9.04.
I want to mount a USB HDD to my PC.
i would like to have all my ntfs drives mount @ start up here is the command im currently useing sudo mount -t ntfs-3g /dev/sdc1 /media/D -o forcei have made the folders D E F etc now i know that the command for starting restarting and stoping samba changed in 10.04 so did something change with mounting ntfs drives
View 1 Replies View RelatedI use this command to mount sshfs:sshfs -o idmap=user user@ip:/home/user/public_html ~/FolderThen I enter my password. I do this every time I start my computer
View 3 Replies View Relatedhow would i mount mapped linux (ntfs drives) when ubuntu starts
View 2 Replies View RelatedI am running 64bit ubuntu 10.04. I have an nvidia software raid formatted with ntfs. The raid only mounts about every 10-15 boots. It is completely random on when it will mount. I even have included "force" in the ntfs-3g mount options.
Also, possibly related, many times ubuntu will not even load unless I load windows first and then restart. I run Ubuntu on its own partition using ext3, so this makes no sense.... It makes me scared to run a computer with only Ubuntu because it seems Ubuntu cannot load unless window loads before it! I could understand this if Ubuntu was formatted as NTFS, but the only NTFS drive Ubuntu sees is the raid, which is not mounting anyways, so why is it dropping to the command prompt?
i did it to mount my hd in the startup but id didnt work, so i want to undo it, and if somebody can tell how to make my hd to be mounted since the startup
[Code]...
I work at a school where we are experimenting with Ubuntu 10.10. On our Windows machines, when the users sign in, their "U:" drive automatically mounts up so that can access their network shared storage. Is there a way to set this up in Linux so it automounts, rather than them have to go and find it out on the network every time?
View 2 Replies View RelatedI've been trying to unsuccessfully auto-mount my drives when starting up. I've made a script that sets me to the root using "sudo -s" and then mounts the drives. The commands to mount the drives work properly when entered into the command line, but when I try running them from an executable, they don't work. What might I be missing?
View 2 Replies View Relatedi want to use this line:
[code]...
to mount my volume at start up. it prompts for my truecrypt password(TCP) to open my files. so far i can put it in in the "Startup applications" but it needs root rights.. so it prompts for my root password and then again for my TCP. id like it to only ask for my TCP. i tried just putting the command and then also putting the command in a bash script and calling it from there.
I was trying to automount a few NTFS partitions last night. Upon reboot, I got the following error messages.
/device/sda2 ... is not ready or present
/device/sdc2 ... is not ready or present
Then Ubuntu just freezes. I am using Ubuntu Natty, if that helps. I am currently unable to get into Ubuntu without a LiveCD.
Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I get this when I try to mount this drive. I was working just fine and then when I tried to mount again to pull some data off It gave me an error. It is an internal hard sata hard drive hook up via usb with a usb to sata converter. Is there some kind of disk check i can do to find errors. There is data on there I would like to keep
How to mount external drive in Lubuntu?
View 3 Replies View RelatedI need a hand with mounting an external hd on boot with ubuntu server. I am aware of modifying the fstab, but that doesn't seem to be working. Here is an output:
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
[code]....
The problem is with the last line. Once booted into the server, I can mount using the following command:
Code:
sudo mount -t ntfs-3g /dev/sdb1 /media/externalHD
I know I can work around it by running a script with the previous command at startup, however I think I am simply doing something wrong. Is there a better way?
I need a hand with mounting an external hd on boot with ubuntu server. I am aware of modifying the fstab, but that doesn't seem to be working. Here is an output:
Code:
# /etc/fstab: static file system information.
#
[code]....
I am the owner of a netbook (Namely, the Acer Aspire one.) With Ubuntu 10.10 netbook edition. I also own a External Usb CD drive. My question is, how do I mount it? K3B seems to find it. Sound juicer doesn't. Rhythm-Box doesn't.
View 3 Replies View Related