I use Ubuntu 8.04 Server It uses OPENSSH 4.7 version I want to upgrade from OPENSSH 4.7 to OPENSSH 5.5 [URL]..Other Ubuntu releases have updated package Can I use this one The Maverick Meerkat OpenSSH 5.5p1-4ubuntu1
View 1 Replies
So this very (for me) important little package fails me once again. But this time it refuses to restart/start
This is the output:
Setting up openssh-server (1:5.3p1:-1)
Restarting OpenBSD Secure Shell Server: sshd: failed!
/dev/null is not a character device!
invoke-rc.d: initscript ssh, action "restart" failed.
[Code].....
The error is within the /etc/init.d/ssh script. ("error")
This is in squeeze so I can only blame my self, but.. This is one of the packages that fair and square should not fail to install/update/start/restart no mather what!
What was the equivalent apt-get command for installing LAMP and OpenSSH in Ubuntu 10.10?
View 1 Replies View RelatedHow to configure openssh, /etc/sshd_config on a new installation of Fedora Core 14? [since tt does not work right out of the box, I cannot ssh into it]
View 2 Replies View Relatedi need to know the ins and outs of openssh
View 2 Replies View RelatedSet up my mom with Ubuntu and want to be able to connect to her computer remotely to help her out when she has a question. I did some search and it seems that everyone recommends using openSSH. I used this link [url]
To install it on my mom's computer (changed the port to 16 instead of 22 and added those lines he suggested to the end of that file). Now what? I can't seem to find any instruction to connect the two computers. Looking around I also found:
1- Remote Desktop Viewer
2- Terminal Server Client
under applications/internet and
3- Remote Desktop under preferences
It looks like I can use those to connect also. But are they related to openSSH? Should I uninstall openSSH and use 1,2 or 3? Which is moe secure or are they the same.
I just setup Ubuntu 10.04, and immediately installed OpenSSH using synaptic. I edited the /etc/ssh/sshd_config file e.g. no password authentication, non-standard port, etc. Using /etc/init.d/ssh restart I restarted the daemon, and everything worked perfectly. However, now it's almost like there is a lock on my service somehow. I edited the config file and added "PrintMotd no" and "Banner none". I killed all my active ssh sessions, restarted, and still saw the motd and the banner.
I then tried sudo /etc/init.d/ssh stop. The script reported ok, but netstat reported sshd as still listening on the port I had defined. I could still login. At this point, I don't know what else to do. I have tried looking at auth.log, I don't see anything funny there. I tried rebooting, and the config changes are (apparently) not loaded, I still see the motd upon ssh login. This is a totally clean system so I don't know what I am doing improperly.
I am trying to update using Update Manager and I get this message: Failed to fetch "Failed to fetch [URL]..404 Not Found" My system is 64 days out of date now.
I have looked elsewhere for an answer and some others have had similar problems, but I have not found a reason for it happening, nor an answer. I wonder if anyone can help me please. I have been using Ubuntu for several months, can use the Terminal if I have the right commands to issue, but beyond that have limited knowledge of the system.
having had problems with getting grub2 to work on dual HDD setup...despite the most excellent advice on the forum i took the plunge and installed 10.10 from update manager within 10.04..... bingo fixed grub and now have dual boot again. but the update manager and synaptic package don't work because of libedata-cal1.2-6 file that remains..following other advice on the forum Advice gratefully received, how can i force an unistall of this package
mark@studypc:~$ sudo apt-get -f remove
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
Update Manager is inviting me to update from my Maverick Meerkat to Natty. Is this a good idea?
View 7 Replies View RelatedI started the upgrade to 10.4 from 9.10 through the update manager. It started the update to 10.4. After downloading almost 95% of the update, it gave an error message of "could not download certain components. downloaded files will not be erased" and stopped the update. I restarted the PC, and started the update manager again. But now it does not show any option of update to 10.4. how do I continue or resume the update process? I just started using ubuntu about 15 days back. So, I am relatively new to this.
View 3 Replies View RelatedI just installed ubuntu 10.10, and im triying to update, when i uncheck the packages that i dont want and click on the "install updates" button in the update manager, the update manager check it again and download the packages that i dont want
View 1 Replies View RelatedI have Ubuntu Karmic 64-bit installed. Update manager tells me there are updates available, but when i try to install them, downloading the updates fail and throws this error:
Code:
Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/e/eglibc/libc6-i386_2.10.1-0ubuntu16_amd64.deb
Consequently, a similar error occurs when I try installing Sun Java 6 Runtime.
Code:
Failed to fetch http://archive.ubuntu.com/ubuntu/pool/multiverse/s/sun-java6/sun-java6-jre_6-15-1_all.deb Connection failed [IP: 91.189.88.31 80]
Ubuntu Restricted Extras stalls when it's time to download the Java package I tried synaptic, update manager, aptitude, apt-get, and they all throw similar errors. Then I also tried connecting to different servers, to no avail. So to check if it's my connection to the net that has problems somehow, I tried downloading the file directly through my web browser, and it works. (But it's not recommended, and it won't let me!, install the updates manually, right?) I tried searching for the errors on the net and in the forums, and they're all somehow related to proxy servers. I then checked if I'm using some inappropriate proxy settings, and everywhere it's all set up to connect to the net directly, which is, well, my setup.
Take note though, that I am able to install other softwares normally, i.e, using synaptic, apt-get etc. The ones I tried include Pidgin and Mplayer. It's just these updates and Java:
Code:
jeanne@jeanne-desktop:~$ sudo sudo aptitude upgrade
W: The "upgrade" command is deprecated; use "safe-upgrade" instead.
Reading package lists... Done
[code].....
I am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies View RelatedI'm having trouble updating. Using the update manager fails and I see the message:dpkg: parse error, in file '/var/lib/dpkg/available' near line 23288 package libbonoboui2-common': 'Conflicts' field, reference to 'libbonobous2-0': version contains ' '
I've tried
sudo dpkg --configure -a
and
[code]....
every time i try to update my computer i get this message administrator@desktop:~$ sudo aptitude upgrade W: The "upgrade" command is deprecated; use "safe-upgrade" instead. Reading package lists.Done Building dependency tree Reading state information. Done Reading extended state information Initializing package states.. No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used.
[Code]...
When i do update from Terminal, i dont get all updates which are in Update manager. Why?
Code:
sudo apt-get update
sudo apt-get upgrade
I've run the command "sudo apt-get update" from terminal, showing no update to do.Then I've run the update manager (System-Administration-Update Manager) and it has shown an update (adobe flash).I thought that "apt-get update" command and update manager were the same... Why do I have different results ? Is something missing in my "sources.list" file ?
View 4 Replies View RelatedNormally Update Manager always finds the update to the next version of Ubuntu. It still hasn't given me any notion whatoever. I allready changed the settings from regular to LTS, but nothing changes. There are updates to the kernel, but I cannot download them, so I'm kinda stuck here.
View 5 Replies View RelatedI upgraded from 10.10 to 11.04 on my Toshiba 32-bit laptop without any problems.Since the upgrade I am starting to have troubles on this machine. Most others are 64-bit and bar an Evolution issue are fine.In this case, 24 hours after the upgrade the machine wanted to do an Update. It would not allow the update until I fixed some broken packages which I did via Synaptics Package Manager. I then Marked All Upgrades and did the update from there.It was fine until I shut down and tried to log in again.I got the Blue Screen of Death!!!!!! I thought only Windows had this!Anyway, I could not log in. The auto login was not working so I used Other which gave me Recovery, entered my UN and PW, and I got the error message:
HTML Code:
Could not update ICEauthority file
I have searched the forum and some other sites, but none of the ideas can I get to work. I can start the machine using a 9.10 CD in the trial mode, but can not download the files suggested or delete the ICEauthority file, etc...
I upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found
, W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
[Code].....
Using 11.04. After an update by Update Manager, everything seems fine. but after I rebooted it fails to reach the log in screen. It shows Ubuntu is booting up, after that, it seems it has crash, though I managed to boot it up and go into my desktop in low graphics mode.As I'm new to Ubuntu,
View 4 Replies View RelatedI had to compile openssh so I could have a version with the HPN-SSH patch applied. The compile seems to have gone fine, but oddly enough I have now have no ssh script in my /etc/init.d directory. So I have no easy way of automatically starting openssh-server.Here are the configure options I used when compiling openssh:
Code:
./configure --prefix=/usr --sysconfdir=/etc/ssh --with-pam
I'm having problems getting openssh server to accept connections in Ubuntu 10.04.Here's what I've done (twice): Installed Ubuntu 10.04 on USB drive with pendrive installer. This creates a default user "ubuntu" and you don't get the chance to choose a password for it. Started a keyring for network access and selected password. Works.Enabled VNC and selected password. Works fine with VNC client on local network. Logs in as "ubuntu" user and asks for the VNC password, then connects. Note: the client doesn't know the "ubuntu" user password, and neither do I! However, it works.Installed openssh client and server from Ubuntu s/w center.
$ ssh localhost OR $ ssh ubuntu@localhost try to connect, but asks for password, which I don't know (see step one, above) so, then I created a new user, with known password, logged in as new user in Ubuntu, works.however, $ ssh newuser@localhost still fails, even when correct password for <newuser> is supplied. Rejects the password three times, then gets the usual error about keys.I also tried connecting with an SSH terminal app from my iPad, again using <newuser>. It gets essentially the same error, "failure to authenticate".
All this is still on my own LAN, haven't gotten to going outside the router yet.What I want to do in the end is use VNC over SSH from a client on my iPad to talk securely to Ubuntu while I'm traveling.
I have Ubuntu 10.04 and I used my ssh to connect to a webserver. This is the version that I have installed.
Quote:
OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009
Apparently the server was hacked using my user and the server admin suggested the my ssh can be tainted.
do a checksum of the ssh, but I cannot find this file on my system.
Code:
md5sum /usr/sbin/sshd
And I will need a md5 hash from a good untainted version and I cannot find that as well on the openssh website.
When ever I try to sftp or even ssh into my server I get connection refused.
I have the port forwarded in my router.
What am I missing?
Also I have installed Ngnix so what do I need to do for it to work?
I've read that blowfish encryption is much faster and still safe enough to transfer files between hosts.What's the default encryption used by openSSH? (if not already blowfish)
View 2 Replies View Relatedi have a healthy and fully operational mobile broadband connection yet i cannot update my Ubuntu 9.10 computer. every time i try to update i receive an error message with the title: "could not download all repository indexes", the information the dialog box contains is as follows
GPG error: http://flomertens.keo.in edgy Release: The following signatures were invalid: NODATA 1 NODATA 2GPG error: http://ntfs-3g.sitesweetsite.info edgy Release: The following signatures were invalid: NODATA 1 NODATA 2Failed to fetch http://flomertens.keo.in/ubuntu/dist...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
[code]....
The option to update to 10.10 isn't appearing in Update Manager... Is it too early, or am I doing something wrong?
View 2 Replies View Relatedim on mint 10 and when I run Update Manager i get this
Code:
W: GPG error: http://archive.canonical.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://security.ubuntu.com maverick-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
[code]....
