When I try to upgrade ubuntu 9.10 to 10.04 I get the error message
Error during commit
'E:Couldn't configure pre-depend openoffice.org-core for openoffice.org-filter-binfilter, probably a dependency cycle.'
Restoring original system state
After it finishes downloading the files. I completely removed all openoffice related files on my computer and i still get the message.
After downloading the packages I get the following error message:
"Could not install the upgrades
Error during commit
'E:Couldn't configure pre-depend X11-common for x11-xkb-utils,
probably a dependency cycle.'
Restoring original system state".
I am using apache2 with subversion and trying to get post commit script to run an svn update command. All svn commands seem to work fine manually
Everything used to work fine but then the server ip changed and I can no longer access it with the web name and have to use the ip directly
I am using tortoise svn with vista on my work machine
Here is the script
#!/bin/sh
export LC_CTYPE=en_US.UTF-8
/usr/bin/svn update /home/common/webroot/bob
Here is the result.
Command: Commit
Modified: C:UsersMattDesktopcheckout - bobindex.php
Sending content: C:UsersMattDesktopcheckout - bobindex.php
Completed: At revision: 63
Error: post-commit hook failed (exit code 1) with output:
code....
I think what i need to do is update the certifcate for the apache2, but I'm not sure how to do this, where to put it, and then which of the thousand apache config lines needs to be changed
I m new to setup the CVS in linux , i have tried lots but every time whenever i try to commit the change in module or file this error has been generated : cvs [commit aborted]: 'root' is not allowed to commit files.
View 1 Replies View RelatedI have installed SVN and running it fine. Update and commit and all are running without issues and running it under DAV from apache on Ubuntu server.
Now I need to run post-commit hook to auto update a testing staging server to test the changes. Without post-commit hook, everything works fine. The post-commit hook if run individually as a script manually runs fine without issues and it updates the said working copy. But if it is run by SVN, it somehow does not run and gives error to the client from where commit was done. This is the error I get for the post-commit script:
Code:
When I commit changes on a SVN repository, I always run into the following problem in the terminal in Ubuntu: Error reading /home/ssylee/.nano_history: Permission denied.
View 4 Replies View RelatedWhile upgrading (why did I do it?! 9.10 was working fine!) I got an lengthly error and now the computer won't boot. Error and then boot screen:-
Code:
Could not install the upgrades The upgrade is now aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a). Please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process
[Code]...
Computer won't startup after upgrade from Ubuntu 9 to 10.04 Lucid.
Upgrade performed through Update Manager.
Have repeated this exercise with the same result. (After failed first time, reinstalled v9 successfully. Waited a few weeks then tried updating to v10 again. Same unsuccesful result as last time I tried it.)
Got one error message during upgrade: "Missing resoureces. The Network Manager Applet could not find some required resources. It cannot continue."
Upgrade otherwise appeared to operate smoothly.
But:
When upgrade complete, and on restart, the following happens:
Gets to purple start-up screen fine. The dots tick away for a little while, the hard drive accesses, then goes to blank screen and all stops. Nothing. Keyboard doesn't work. Screen backlit, but no-one's home.
Restart again makes no differnce.
Machine: IBM Thinkpad X40
I was running Ubuntu 10.10 and I was having issues with graphics card drivers so I decided to try upgrading to Natty using my Internet. The download went fine, the installation went fine (I sat and watched the computer the whole time. When I tried to upgrade from 10.04 to 10.10 I had the same issue and ended up having to wipe my hard drive and start over from the CD). But right before the installation was finished, the screen went blank except for a tiny text-editing cursor and even the cursor froze. Also, the Caps Lock and the Num Lock lights were flashing in sync rapidly. After a while I forced it to shutdown and then restarted it. GRUB boots, giving me a list and the option to go to a command line, but if I select 2.6.38-8-generic or the recovery mode, it freezes and the lights flash as described above.
In other words, all I can get to is a very basic CLI through GRUB.
Upgraded from 10.10 on my tower (scratch built, AMD Phenom II X6 1090T 3.2GHz, 16 GB RAM, 2x Sapphire Radeon HD6870 1GB) and it seems to have gone very wrong.
At the final post-installation reboot I get BIOS post, a black screen that hangs around alarmingly long, then the Ubuntu splash screen, then another black screen that seems, if anything, even MORE black (don't know how that works, but that's how it looks - it's not OFF but it's VERY black) and a whole lot of nothing going on.
Tried Ctrl-Alt-F1 to get to a TTY session, no go, no reaction. Just my friendly black screen. Tried F2-F6 as well, same deal. Tried Ctrl-Alt-F7 through F12 on spec, also no response. So Control-SysRq-K... and I DO get a response - I get a black screen with a number in []s and SysRQ: SAK. No TTY. Still doesn't like Ctrl-Alt-F1.
No disk thrashing. Nothing but gently whirring fans and my error message.
-UPDATE I take it back, it finally gave me a TTY login.
So. Um. Any guesses what happened to my poor XWindows setup?
I'm running the 64 bit version of Ubuntu 9.10 on an AMD64 dual core platform with all the most recent upgrades installed. After the most recent Kernel upgrade version 2.6.31.20 the computer failed to boot correctly. Extremely slow getting to the desktop and a general failure to preload any programs that I load on boot. I had to uninstall and revert back to the previous Linux headers which solved the problem. If it makes any difference I have the machine setup as an apache2 server along with my standard desktop environment.
View 1 Replies View RelatedI ran the upgrade from ubuntu 9.10 yesterday and it's now a mess. Is there something I can do to refloat this ship?
The file download stage seemed to be working OK: I was watching it when it only had three minutes left to go. I went away and came back a few minutes later and the screen had gone black. OK I thought, this must be all part of the plan, so I went away and came back over an hour later: still nothing. I decided, perhaps foolishly, to press the power button and boot it up.
Eek! Now I get the following errors:
mounting none on dev failed: no such device
chroot:cannot execute /etc/apparmor/initramfs: no such file or directory
Then the message Ubuntu 10.04 LTS cruncher tty1 and a login prompt. I can log in OK but don't know what to do next to recover the situation.
Rather alarmingly there is some activity on the system: lots of messages beginning with a number like [22.71309.
I was upgrading my ubuntu(9.10)/xp machine to ubuntu(10.4)/xp . but there was a power failure and was running in backup for 15 min. But after that the system shutdown automatically. Now when i boot, grub appears and after selecting the ubuntu partition i get a error saying cannot find device.
View 1 Replies View RelatedI was happily running 10.04--- really worked fantastically! Then, I updated all, and upgraded to 10.10 using the upgrade manager in Ubuntu Desktop. Now, when I choose Ubuntu from the boot page, the computer shuts down--- no errors, it just reboots and I get right back to the boot page. I cannot boot into Ubuntu at all, and I am now stuck with Windows 7 once again.
View 5 Replies View RelatedI'm having a few problems getting my system to boot after upgrading to 11.04.This problem actually first arose when I upgraded from 9.10 to 10.04 a couple of weeks ago, however I found I was able to boot by loading a selecting a previous kernel version (2.6.31.22 was the latest version I could successful boot from) and as I was a bit busy with exams at the time I decided to leave it be temporarily as I at least had a functioning system.I upgraded from 10.04 to 10.10 and then finally to 11.04 today. The original problem persisted on the upgrade to 10.10 however I was at that point still able to boot using the older kernel version. On the restart after the upgrade to 11.04 however, the system now freezes when trying to boot from 2.6.31.22 or previous versions (the splash screen shows and then the system gets stuck on a blank screen with just a cursor visible, but remains responsive to mouse (cursor moves) and keyboard (goes into restart process on Ctrl-Alt-Del)).
I'm at a bit of a loss of what to do and would be massively grateful if anyone had any advice of where to start for a solution. I can access the system using a LiveCD - the output of the boot info script is attached.
I successfully installed Ubuntu 9.10 Netbook Remix on an Asus EeePC in a dual boot mode with Windows XP. Because the computer has no CD drive, I used a USB stick to download the files for installation. Twice now, after upgrading to a new kernel (2.6.31-17 and 2.6.31-19 I think), when rebooting after the upgrade and selecting Ubuntu from the operating system menu, I get a message:
sh:grub>
along with a notice about limited shell commands being available. The ls command results in:
(loop0) (hd0,3) (hd0,2) (hd0,1)
In trying some of the other commands, I get a message that a linux kernel isn't loaded. The computer still runs Windows fine - or at least as fine as Windows ever runs. I'd like to recover Ubuntu without doing another full installation.
I got a root user command prompt - what do I do next? Edit /etc/X11/xorg.conf? How?Do I need to boot up a live CD?
View 1 Replies View RelatedI have 3 separate hard drives, I IDE and 2 SATA. The IDE has side by side installation of Windows XP and Ubuntu. The 2 sata drives each have Ubuntu only. I upgraded the 2 separate drives to 10.04. with no problems I then upgraded the dual boot Ubuntu to 10.04 and it would no longer boot I formatted the partition and did a clean install of 10.04 Thereafter the Ubuntu on the dual boot drive will boot but windows will not nor will either of the 2 separate drives. Results text from boot info search is attached. I can access the 2 Ubuntu drives through the funcitonal Ubuntu on the dual boot drive, but cannot boot them.
View 1 Replies View RelatedI recently upgraded to Ubuntu 10.04. Now after rebooting I don't get the grub menu anymore nor can I get into ubuntu or vista (I used to dual boot between ubuntu and vista). I get to a black screen with an blinking cursor.
Disk info:
HP dv5t x64 Intel 2.40 Ghz
Running 10.04 tried to upgrade to 10.10. Download ran for 6.5 hours then produced a failure message. Download speed varied all over the place from 30 kbps to 170 kbps but usually well below 100. Speedtest shows about 100 kbps in and out. Is there a way to drop back to 10.04 ad run the 10.10 download from scratch? Attempts to run the download now produce index error messages.
View 3 Replies View RelatedAfter I upgraded to 10.04 using the prompt for an upgrade. Ubuntu failed to boot. PC starts but during boot hangs after ubuntu symbol and screen goes black and PC overheats. Same problem when booting off CD. I removed HDD and rigged it up as a USB) but can't read the the disk in windows. The PC works fine using old windows HD. What do I do?
PC:IBM Thinkpad G40 (laptop)
Ram: 1Gb
1. Update-manager panel icon changes into do-not-enter traffic sign.
2. If you want to re-install Update-manager using Synaptic, then Synaptic opens for a while and then closes by itself.
P**sed right off now, tested this upgrade on two test systems before hand to make sure this would work.Upgrade my server from FC9 to FC10, it had two Encrypted XFS volumes on totalling 1.5TB of files which I don't have space to backup anywhere else.Have now upgraded and the Encrypted volumes are showing as not existing "volume name does not exist"
View 2 Replies View RelatedI,ve tried upgrade from F14 to F15 using preupgrade, but I run into serious problem. Preupgrade downloaded all packages without problem and prompt me to reboot. After reboot installation process went ok. It was upgrading cca 1650 packages. But installation hung around package 1600 (almost on end) with message that openjpeg-devel-1.4-6.fc15.i686 cannot be installed and only option to end installer. After reboot I ended up with "kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)". It is still possible to enter grub menu, where I can choose upgrade to F15, but it fails again on that openjpeg-devel package. When I enter terminal after failure, I can see package is downloaded in preupgrade repo (and after moving somewhere else and running upgrade again it I got message that package is missing). Is there any possibility to skip this package installation or only option is fresh reinstall?
View 10 Replies View RelatedThe laptop I regularly use is out of use after having tried to upgrade from ext3 to ext4, following the instructions that can be found at namely, Step 2: Upgrading to Ext4Well, the first step was done without problems, but when I reached "Mount your filesystem", the problems started:When typingsudo mount -t ext4 /dev/XXXX /mntwhat appears is:UNEXPECTED INCONSISTENCY; RUN fsck MANUALLYStupid me, I did nothin but jump to the next step:gksu gedit /mnt/etc/fstabWhere I only got a fully white screen with no written text at all, instead of the menu that should have appeared, as can be seen on that webpage.
However, after running Gparted again, it showed the extension as EXT4, not EXT3, so I thought the system had automatically upgraded. Then I proceeded to boot the system, and this is where the massive failure appearedAfter seeing the Ubuntu logo for a while, the system directs me to a blank screen with the message:Mount of filesystem failed.dc5123-ec01-4438-8bd6-cb85bb080f87A maintenance shell will now be started.CONTROL-D will terminate this shell and re-try.root@hihihi-laptop:#So I type CTRL-D:
mountall start/startingfsck from until-linux-ng 2.16
/dev/sda1: One or more block group descriptor checksums are invalid. FIXED
/dev/sda1: Group descriptor 0 checksum is invalid
[code]....
I've been running Ubuntu 10.04 AMD64 on our home theater PC through a wubi installation. Yesterday the system update installed a new kernel and today there is a problem booting the computer so I'm reluctantly using Windoze to type this. there isn't much information: the computer has always booted fine before the kernel update. When I select Ubuntu in the boot menu the screen goes black and the computer restarts. No error messages, no GRUB menu, just a blank screen before restart.
Computer: Dell Hybrid 140G, Intel Core 2 Duo T5800, 4GB RAM
I moved from 8.04.2 to 10.04.2 and tried to upgrade from GRUB Legacy to Grub2. I must have made a mis-step somewhere in the process as on boot it now tells me
Code:
GRUB Loading stage1.5.
GRUB Loading,
Error 15
_
Is there a nuke from orbit, no finesse way of just ripping all the existing GRUB mess out and installing GRUB2 from Boot disk? for instance should I be just be able to boot with a LIVE CD mount the primary disk of this machine and enter the below in a terminal without messing up any further?
Code:
sudo grub-install --root-directory=/media/PRIMARY_DISK /dev/sda
I learned yesterday that doing a massive upgrade on my system while moving was a BAAAD idea.The upgrade process was going along just fine, it was all downloaded and was actually installing that last time I saw it. I unplugged my laptop to move a bookcase out, and completely forgot to plug it back in. After I got back from moving a load, I found my computer was off. I tried to boot up, and I got an error that kind of freaked me out. It reads as follows:
Code:kernel panic not syncing vfs unable to mount root fs on unknown-block(0,0)I'm able to get to grub just fine, and my windows partition loads up just fine, but any of the linux kernels fail similarly when I attempt to load them.I'm sure that I can fix this, I just have no idea how. Probably has something to do with a live cd.
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies View RelatedI am using Ubuntu 10.04 on a dual-boot system with Windows 7. Yesterday I upgraded from 2.6.32-23 to 2.6.32-24. After that, pressing the shutdown button and selecting shutdown or restart (whether on the login page or after I've logged in) will only bring me back to the login page. I can shutdown or restart if I do sudo shutdown now, but I'd prefer to use the GUI. Also, there is no sound now (not a big deal, but still not good). And I can't access my storage partition (not the windows7 partition, but a third ntfs partition with data on it). I get the error message that I am unauthorized to mount. I have the only account on this computer, so I should be authorized. This one is a HUGE problem for me, because I need to be able to access my data for work. None of these were problems before the upgrade.
Oh yeah, and quickstart is not enabled. Also, if I go to Power Management, and try to alter what to do when Power Button is pressed, my only option is Ask Me. I know these have been problems/solutions to the shutdown/restart problem in the past.
