I'm using Ubuntu 10.10 x64 as a base for my custom live cd and i could not change the username. I changed my /etc/casper.conf and /etc/lsb_release, yet still nothing changes. Is this achieved with casper/ubiquity and preseeding at all?
View 1 Replies
trying to change the user name of the live cd.I have edited the /etc/casper.conf file in the chroot environment but when i run the cd ubuntu is still the user name. Where should i change it?
View 2 Replies View RelatedI am using ubuntu 8.04 and i am trying to make iso image cd with running kernel. i know that there is documentation in ubuntu website in"how to make live cd" but the thing is this is my custom kernel. i have my own configuration. so i want this kernel to be work in live cd.
View 1 Replies View RelatedI just downloaded Debian's live CD .iso file. I put it on a USB stick and booted from it. It loads everything then presents me a login screen. I have no idea what the login and password is I've looked all over google and people said it was user: live pass: live or something like that. I've tried a lot of different combinations with no luck. So does anyone know the real username and password for this?
View 14 Replies View RelatedI used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
out with how to change the username and password given while installation.could not login .just now i installed and try tologin but due to some mistake i lost the password. how to change that one
View 1 Replies View Relatedhow I managed this, but somehow during a reinstall I changed the ownership of all my home stuff to root, instead of my normal username. So now nothing loads, unless I sudo it. I had to use sudo just to open firefox.
View 3 Replies View Relatedi'm trying to run ubuntu 9.10 64-bit on my 64-bit machine from a live cd, when i boot from the disk i select ENGLISH and the first option on the menu, which is try ubuntu without making any changes (or something to that effect). it then goes off to the black screen with the white ubuntu symbol, following that the brown login window appears requesting a user mane and password, now as its a live cd session i have not set a user name or password! so how do i login?
View 3 Replies View RelatedI dub thee sakware: "Swiss army knife" ware Username is custom, password is blank Startupmanager must be chroot 'ed...
[Code]...
I am in the tasks section of the following tutorial [URL] I did the list package thing to see what packages there are. However now I cannot leave the list in order to run the purge command. How can I get back to the previous section so I can remove packages from the custom live cd. I want to make sure I am editing the live cd and not the current install. I am going to make two images. One cd that will still have a gui but I plan to build as a recovery tool. The other one is a dvd and will be for installing everything I want on any machine. I am doing the tutorial with Karmic. Also I have cursors, themes and icons I installed from gnome look. I then went to customize and created my own personal mix I like. I would like to make this a standalone theme and come as the default theme on the live cd and dvd. I have no clue what I am doing, however wish to learn to build my own custom live cd. Also I would like to know how to ad repositories to the live cd and how to add programs pre installed that are not usually included.
View 2 Replies View RelatedI'm sure this is possible to do, but how do I create a Ubuntu install cd that uses my current config. Ideally I would like to be able to install exactly what I have on my system now, without user files. Wine, Ccsm, amarok, audacity, themes the whole nine yards. I tried using a program called Ubuntu Customization Kit, but it wouldnt let me mount the normal ubuntu install .iso file. This would avoid the hour and a half post-install config every time I screw Ubuntu up as well as stripping off many of the programs I don't need...
View 3 Replies View RelatedI want to create a custom live cd of off peppermint os one. I want to add specific software, and delete some packages i don't really need. How can I do this Reconstructor is not what i want, because i am forced to use Ubuntu or Debian,
remastersys doesnt work for me since I see no option in using peppermint one as a live cd.
how to make a live cd how can I put it on a usb stick. [URL] Also in the article you install skype etc. but where did they get the path to donload skype etc. I might want to add more software.
View 9 Replies View RelatedI'm working to setup an small PC as a kiosk, I was able to create an USB pen drive with ubuntu 10.10 with a persistent area and I made all the changes I need, everything works but if the PC loss power in most of the cases the file system is corrupted. Now I'm trying to generate a non persistent USB drive, but I'm having some problems. I was able to install remastersys and create an ISO image of my system (dist) but when I tried to create the USB drive using different Programs, in all cases I get the boot menu but it never complete the login, it just try to keep booting. The only messages I saw when I create the iso image is a bunch on chown operation fail from remastsys, I'm not sure if it is part of the problem. how to create an USB read only from a persistent one ?
View 2 Replies View RelatedIs it possible to create custom Live Linux cd that consumes less RAM by limiting its functionalities?My laptop has 448 mb RAM and I want to run the LIVE CD along side windows xp pro(using VMware Player). I have tried a few Linux live cds but all of them are very slow when I run them inside xp!! I want to create this custom live cd so it only have firefox browser (latest version) pre-installed along with flash player (Latest version) and ability to hear voice when playing ..... videos. (I want omit the rest of programs in order that Linux runs faster). Is it possible to gain speed by omitting un wanted programs? How I can create such LIVE cd with limited functionality and fast performance.
View 7 Replies View RelatedI am trying to make a Custom Ubuntu Live CD using Remastersys and an installer for the Live CD using Ubiquity. I was able to successfully create a Custom live CD using remastersys and when I boot from the custom Live CD the grub correctly displays the Custom Live CD Name that I specified during the ISO file creation using remastersys. However, when I install from the Live CD that I created, using Ubiquity, after reboot, the Grub menu displays as Ubuntu and not the Custom Label. How can I change it so that after installation, the custom Live CD name is displayed?
View 3 Replies View RelatedWhat I want to do is create a custom live USB startup of ubuntu.
I know how to create a usb startup from the iso (any ubuntu iso), with the usb startup disk tool.
Is it possible to add some software to it, for example suppose I want it to have exaile and wireshark (or any software) already installed.
How can I do that ?
I am using Grub4Dos to boot Ubuntu 9.10 Desktop Live CD. In the menu.lst i made the following changes.
Quote:
title Ubuntu LiveCD 9.10
find --set-root /ubuntu-9.10-desktop-i386.iso
map /ubuntu-9.10-desktop-i386.iso (0xff)
map --hook
root (0xff)
[Code]....
The code runs fine and Ubuntu loads also from the ISO stored in the C: drive of my system.
The problem is when Ubuntu loads it changes my clock time. I have set the timezone to Indian Standard Time. Since it is live CD it should not make any changes in the system however, it does change the Data/Time of my system.
Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
I am new to linux, but need to do the following:
1.) Use a basic ubuntu 9.04 distro
2.) On boot run an existing .sh script
I would like to make a thumbdrive with a live cd version that will auto run to desktop and execute the .sh script. I am looking for pointers on accomplishing this. I have found ways to get the live cd to run on USB, but it still involves clicking the "run without changing your system link" and I cannot figure out how to run the script on start up.
I'm working to setup an small PC as a kiosk, I was able to create an USB pen drive with ubuntu 10.10 with a persistent area and I made all the changes I need, everything works but if the PC loss power in most of the cases the file system is corrupted. Now I'm trying to generate a non persistent USB drive, but I'm having some problems.
I was able to install remastersys and create an ISO image of my system (dist) but when I tried to create the USB drive using different Programs, in all cases I get the boot menu but it never complete the login, it just try to keep booting. The only messages I saw when I create the iso image is a bunch on chown operation fail from remastsys, I'm not sure if it is part of the problem. How to create an USB read only from a persistent one ?
I would like to know is there anyway to change the current username to something new? It doesn't appear to allow it via the settings on user accounts, for some reason. (Blanked out) Theres gotta be a way to do it surely? (Using 9.10 NBR Btw cheers.
View 4 Replies View RelatedHow can I change the username via terminal?Also, via GUI is there any to change the username?
View 1 Replies View RelatedI'm building my own ubuntu variant for low resource systems at the moment. It's based from the ubuntu 10.10 minimal install (12mb iso). It uses openbox as the window manager and SLiM as the login/display manager.
What I would like two know is how to have a few config files that are on the live cd to be altered for the installed system. Specifically, SLiM autologin, but I'll probably find other things to change aswell. Basically a sort of "first boot script".
how to change my username. bash@dsl-67-204-11-195.acanac.net I want to change "bash" to something else.
View 1 Replies View Relatedi followed the instructions in http://ubuntuforums.org/showpost.php...5&postcount=11
result was that my pc is rendered unusable. i have no graphical interface when logging in. i can call only the terminal. i have a terminal with the new username before the bash command line, but the user_folder in home is still the old_username. my mistake was, as i discovered later, is that i followed the instructions not in recovery mode.question is, how can i make it all right again, and make my ubuntu to function normally again?
i have problem on my ubuntu 10.10 after i change user name to root and home directory username ( old one ) , and now users and groups not working asnd all application on old user not working !
View 1 Replies View RelatedI'm running Ubuntu 10.04 32-bit. Sometimes I have difficulty starting X. The system complains that "/etc/timidity" is not owned by me. Then the system locks up. I checked the permissions. 'root' is both owner and group. Should I change the permissions to my username and/or my usernamegroup? Or, chown and chgrp to root again? I would experiment on my own with this, but since the system already locks up sometimes, I don't want to find myself with an unusable system.
View 4 Replies View RelatedI'd like to create my own custom Debian live CD — the idea being to have my own rescue CD with my favorite Debian tools installed. I read about bootcd and was going to give that a try, after creating the ideal system in a qemu virtual machine.
How much exactly can you install on a system so that bootcd can still fit it on a CD? I'm presuming there is some kind of compression involved. When I tried to create my VM, I coudln't get Jessie + LXDE to install onto a 2GB virtual drive (net install) so naturally I'm wondering what I'm going to be able to put on a 700MB CD.
I am using Fedora 14. I want to create custom live cd in Fedora 14. I saw this fedora site. [URL]. But its only used command line tool. Any GUI tools are available to create custom live cd in Fedora.
View 1 Replies View Related
