I just recently upgraded to Natty Narwhal and I cant seem to find the System menu. i understand that things have changed cause of the new interface. Where can i find System->Administration. If its not available whats the equivalent?
View 5 RepliesSo, i need to install wine and i can't find software sources to add a code.
View 6 Replies View RelatedI installed Natty assuming Unity replacing gnome pretty much just moved the top bar to the left side.Was I wrong! I can't seem to find preferences and administration to set up anything. I did manage to install unison so I can start copying my file from my other system. But unison seems to have been installed in a new location. Not sure if I installed it correctly as I couldn't find administration so I used the software center. I need to install my I can't even start nautilus to locate its new location.Even starting a second firefox takes extra clicks.I guess what I need is a guide to this new system.I have been using since 5.04 and this new release has me totally lost.Is there a guide to show the differences? And how to do common task?I was able to setup SSH to view files on my other system so I can start copying them. But I wanted to use Unison this time to do it. But I don't know where to install the .prf files.So I need an intro to do common task with unity.
View 2 Replies View RelatedI just upgraded my Ubuntu 9.10 to Ubuntu 10.04. Part of the Ubuntu 9.10 installation was GParted (version 0.4.5) and I saw, after upgrading to Ubutnu 10.04, there was a more recent version available: 0.5.1.
After installing that version, GParted was still part of the System > Administration menu (just as it was before).
But then I saw the version 0.6.0 of GParted was recently released and there was also a .deb distro available.
After downloading and installing the 0.6.0 version of GParted, the item GParted disappeared from the System > Administration menu and appeared in another menu (Applications > System Tools).
My question: how can I get GParted back as part of the Systems > Administrations menu?
Could not download all repository indexes. The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.
View 3 Replies View RelatedI have upgraded a previous partial installation of karmic up to lucid. When I go to System->Administration there is no "Hardware Drivers" link. What should I apt-get install to get the Hardware Drivers link.
View 6 Replies View Relatedinstalled samba by. but i cant find samba in system -> administration ? Should I useCode:sudo apt-get install samba4
View 9 Replies View Relateddoes anyone know of a good site/book/guide to learn about linux web server administration?
and also how do you find the your own nameserver numbers? would that just be the IP of my web server?networking isn't my forte, but i do intend to learn with this project.
I'm trying to follow the directions here. However, I don't have an "administration" folder. I only see Boot and System Volume Information and bootmgr. Where is the folder? Did I install something wrong? I didn't get this problem on my other laptop.
View 7 Replies View RelatedI'm Using 9.04/Gnome. I was looking in System>Administration>Services and wonder if I need them All of below enabled? It seems like duplication to me.
View 3 Replies View Relatedwhat happened to the Security tab that used to be located in System/Administration/Log in Window I'm trying to figure out how to get a Live USB to boot to my user name and password.
View 9 Replies View RelatedI'm newbie to Ubuntu, I have found that under System > Administration > Services options is missing. Also Networking option is missing.The Ubuntu Version : Ubuntu 9.10 - the Karmic Koala - released in October 2009
View 6 Replies View RelatedLucid 10.04, auto upgraded from 9.10, accessed through NoMachine NX from my MacBook Pro 10.6 system.
When I try to access the time settings through the System > Administration > Time and Date menu, all I get is the greyed-out display with the message Not authotized to make changes at the bottom.
With other administration functions, I am asked for sudo-style authorization with my password. That doesn't happen with Time and Date.
Well like the title Implies, In my Administration menu in Gnome I don't have a "Printing" option. So I can't search for/install printers right now.I'm running 10.04 Server. I installed the gnome-desktop-environment package to get a GUI up and running for manipulating the filesystem, But not all the menu's I was expecting appeared. Is this because I used the gnome-desktop-environment instead of the ubuntu-desktop-environment package? ecause I have two PC's setup next to each other. One using the ubuntu-desktop-environment, and one using the gnome-desktop-environment package and the two desktops are clearly different.All I want to know is how to add the Printers menu to my PC running the gnome-desktop-environment package. I already looked at gconf-editor and the printing menu isn't hidden or anything, it's just not there. And me being a new user to Linux, I don't know how else to get to those printer abilities without the GUI
View 1 Replies View RelatedI just upgraded from 10.04 to 10.10. I originally had installed the nvidia drivers using the bash script from nvidia's website. This time around I used the ones from synaptic. However now when I go and look in System -> Administration there are 2 entries for "NVIDIA X Server Settings". The first one has the NVIDIA logo, the other one has a grey question mark. Does anyone know why there are 2 entries and how I can remove one of them?
View 1 Replies View RelatedI did a fresh install on this computer, ubuntu 10.10 server then put desktop on top of it.
I can run sudo -i, enter password, gain root access, but when i click system -> administration and it asks for my password, it always says my password is wrong.
I ran update manager, and my password worked fine there.
When i click system administration and run a task, the password screen looks different
Little more digging shows, it only occures on screens that use the login type of,
Enter the administrative password:
It doesn't even give me options for what user to use. And I am using the account created on install.
for my system administartion I want to know sudosh package, wchich is capable of recording whatever commands the user types..
Now I have download the .tar file but I am unable to proceed further.
what to do next so that I can record my user commands?
Have folks tried Puppet before for system administration? Puppet is system administration Automated [URL]Following article mentions that;
[Code]....
I wanted to look at services, system->admon -> menu only has 7 things on it? I think it should have a lot more?
View 10 Replies View RelatedSay,you have 200 linux servers and you want to monitor things like, disk activity, disk usage, CPU usage, various logs of the servers. What tool is best recommended for this system administration purpose ?
View 3 Replies View RelatedI've just started using Debian having previously used Ubuntu. With Ubuntu, under the System->Administration menu I get lots of options (e.g. Network Tools, Printing, Services...) to select from, but with Debian I just get Login Screen. Do I just get the one option because this is the only thing installed, or do I need to do something to enable other admin options?
View 3 Replies View RelatedDebian 2.6.32 Squeeze + GnomeI try to start System | Administration | Services and I get an error:The configuration could not be loadedAn unknown error occurredI turned on a whole bunch of different services and suddenly now I can't get back in to switch any of these on or off. I'm assuming there is some manual way of switching these off again, I just don't know where to do this.
View 3 Replies View RelatedI've been using samba without issue on Fedora 11 (x86_64) and decided to upgrade to F13 on one of my machines. Upon install I installed samba with the command: Code: sudo yum install samba samba-client cifs-utils I can now see the smb.conf file and could probably use samba via command line; but, I would really like to use the GUI to configure samba as I have in the past. The problem is, there is no samba gui. How do I get the samba GUI back under: System->Administration where it usually is?
View 4 Replies View Relatedsimple installs of CentOS5.2 i386 on 2x Dell C640's and x86-64 on a Dell dimension 9150 resulted in the System/Administration menu offering two entries each with the name 'hardware' and the icon showing a little chip hovering over a PC. I did "add this launcher to panel" on both as an easy way of checking their properties:
The higher entry issues the command 'hwbrowser'
The lower entry issues the command 'hal-device-manager'
Both have the comment "view information on the hardware on this computer". I feel the hal-device-manager entry has the wrong name, comment, and icon. I think /etc/xdg/menus/system-settings.menu is relevant.
After installing VirtualBox, add yourself to the Vboxusers group in System -> Administration -> Users and Groups.Then re-boot your computer!Otherwise you will spend hours (like me) wondering why your USB devices are not available in your guest VM.I just did a complete install on a new, larger hard drive and had forgotten this simple fact. Doh!
View 2 Replies View RelatedMost of my gnome system administration tools are (suddenly) failing to open. The system is a new installation with both KDE and gnome, and the gnome system admin tools were working fine, but now they fail silently (nothing even in .xsession-errors). For instance, if I select Synaptic Package manager from the menu, I will get the gksu prompt to enter my administrative password, which I do. Then a notification will appear in the Taskbar "Granting Rights" and then after that nothing happens, it just fails silently. Note that this also happens if I enter 'gksu synaptic' or 'gksu /usr/sbin/synaptic' at the alt-F2 command line. Note that it doesn't seem to matter whether I check "Save Password for Session" or not. The same happens for time-admin, users-admin, etc. I have tried reinstalling gnome-system-tools, system-tools-backends, and gnome-keyring with no effect. I have googled extensively and have found a few other people with this same problem, but no solutions. Note also that kdesu does still work fine, and there doesn't seem to be any such problems in KDE in general. Only in gnome and with gksu.
P.S. Let me know if you need any more info (output from commands, files, etc).
I am running Debian 6.0.1, GNOME version 2.30.2. For some reason the "language support" option is missing. What do I need to do in order to recover it?
View 3 Replies View RelatedIt is just a general discussion on "How Can Perl Be Useful in System Administration and Application Development on UNIX and Linux Platforms"? I am doing pretty much well with Bash and PHP. In fact, I am learning and experimenting in depth in those two domains. The project that I am working for these days has several scripts which are written in Perl and Ksh. They interact with Ab Initio graphs and perform extensive jobs. Anyways, my current role doesn't require me to have knowledge of Perl but I don't see any harm in learning something new.
So, before I take it, I want to know how Perl can help me and what I can do with it as a UNIX / Linux System Administrator and Application Developer? I just looked at some of its keywords, functions, and commands. Perl Variables are identical to those of PHP. Conditional Statements, Loops, etc. are also much the same as found in any other computer languages. So, at first glance, I have got this feel that it wouldn't be much difficult for me to learn it. But what do you say? Do I really need Perl when I am focusing on PHP and Bash?
I recently was able to network 2 computers at home and I wanted to make my password more secure. When I try to edit my password via System>Administration>Users and Groups, it doesn't workI am able to edit my user settings. When I change my password I enter my old one and it accepts my new one. Problem is when I try to install programs, login and do other things it only accepts my old password. How can I change my password?
View 3 Replies View RelatedSeveral of the the items in the menu System --> Administration do not function. They say they are starting but fail to come up then disappear of the task bar. Is there anywhere i can look to see why it has failed to come up?
All item in the menu except; Display, Hardware, Server Settings, System Monitor