I am running Debian 6.0.1, GNOME version 2.30.2. For some reason the "language support" option is missing. What do I need to do in order to recover it?
View 3 RepliesI have no menu entry for System->Admin->Language Support, and it is not present in the menu editor. Which package do I need to install to get this?
View 3 Replies View RelatedDebian 2.6.32 Squeeze + GnomeI try to start System | Administration | Services and I get an error:The configuration could not be loadedAn unknown error occurredI turned on a whole bunch of different services and suddenly now I can't get back in to switch any of these on or off. I'm assuming there is some manual way of switching these off again, I just don't know where to do this.
View 3 Replies View RelatedOne computer .... three users .... three languages. How do you make that happen? User A speaks English and is happy with English. No problem. User B needs to use Chinese and would like the full system in Chinese. User C needs to use Thai and Chinese. They would prefer their menus to be in Thai and can use iBus for Chinese entry. How do you set up the system so that each user can select their system language when they login?
View 4 Replies View RelatedI'm newbie to Ubuntu, I have found that under System > Administration > Services options is missing. Also Networking option is missing.The Ubuntu Version : Ubuntu 9.10 - the Karmic Koala - released in October 2009
View 6 Replies View RelatedWell like the title Implies, In my Administration menu in Gnome I don't have a "Printing" option. So I can't search for/install printers right now.I'm running 10.04 Server. I installed the gnome-desktop-environment package to get a GUI up and running for manipulating the filesystem, But not all the menu's I was expecting appeared. Is this because I used the gnome-desktop-environment instead of the ubuntu-desktop-environment package? ecause I have two PC's setup next to each other. One using the ubuntu-desktop-environment, and one using the gnome-desktop-environment package and the two desktops are clearly different.All I want to know is how to add the Printers menu to my PC running the gnome-desktop-environment package. I already looked at gconf-editor and the printing menu isn't hidden or anything, it's just not there. And me being a new user to Linux, I don't know how else to get to those printer abilities without the GUI
View 1 Replies View RelatedI only want spellchecking, calendar and currency to be typical for Poland (this is where I currently live), Ubuntu itself (interface, applications, manuals) should be in English - I don't understand Polish well enough.In 9.10 I used to check Polish spellchecking (translations were checked for install automatically but you couldn't tell unless you chose another language and then Polish again) and uncheck the translations. It allowed for setting locale (calendar/currency) to Polish and also keep the spellchecking. Now it's buggy: I can do a fresh install of Ubuntu but can't set Polish spellchecking, calendar (it starts from Monday), currency (it's PLN/zł) and keep the system itself in English. What I do wrong?
1. Fresh install
2. System -> Administration -> Language Support
3. Language -> Install / Remove Languages
4. Find Polish and select ONLY: Spellchecking and writing aids
5. Text -> Display numbers, dates and currency amounts in: Polish
Confirm, reboot and... Bump! I've got Polish translations in several places, e.g.:If I upgrade any software, it is in Polish. Firefox (or Namoroka) locale changes to "pl,en" and its plug-ins are in Polish by default.
After I uninstall Polish translations (and leave spellchecking and writing aids as it was) there's a problem with locale (Polish locale is removed along with translations), besides, system doesn't actually change back to English and newly installed applications either crash with errors or install in Polish.
I've been looking for a way to add Japanese language support to Debian. I need to be able to type and read Japanese for school. I've asked my Linux professor, and he wasn't sure of how to do it... =p
Edit: I've just figured out how to do this. (All you have to do in install a Japanese font). The only problem is I can't seem how to figure out how to type using Romaji and have it convert to Kana automatically, rather than having it have a Japanese keyboard layout. For example, when I type "A", it should show up as ア, and when I enter "KA" it should show up as カ.
I have some music in another language, but when I open the songs in Banshee, their song names just come up as weird characters (like μ).I went to [System --> Administration --> Language Support] and installed support for that language, but the songs still come up like μ. (But in Nautilus, their proper names show).
I know the solution is to change my whole system language to that language, but I don't want to do that, as I am not very fluent in it. Is there any way to enable support for that language while keeping English as the language used to display my desktop?
I have b43 wireless. In network Configuration on system->administration the interface it appears as inactive it appers in hardware also as b43 associated to wlan0 but i cannot have access to any wireless network. What i have to do to put this b43 to work.
View 11 Replies View RelatedI have upgraded a previous partial installation of karmic up to lucid. When I go to System->Administration there is no "Hardware Drivers" link. What should I apt-get install to get the Hardware Drivers link.
View 6 Replies View RelatedWhich scripting language to learn for Linux Administration? Python, Ruby, Perl, or PHP?
View 7 Replies View RelatedI've just started using Debian having previously used Ubuntu. With Ubuntu, under the System->Administration menu I get lots of options (e.g. Network Tools, Printing, Services...) to select from, but with Debian I just get Login Screen. Do I just get the one option because this is the only thing installed, or do I need to do something to enable other admin options?
View 3 Replies View RelatedMost of my gnome system administration tools are (suddenly) failing to open. The system is a new installation with both KDE and gnome, and the gnome system admin tools were working fine, but now they fail silently (nothing even in .xsession-errors). For instance, if I select Synaptic Package manager from the menu, I will get the gksu prompt to enter my administrative password, which I do. Then a notification will appear in the Taskbar "Granting Rights" and then after that nothing happens, it just fails silently. Note that this also happens if I enter 'gksu synaptic' or 'gksu /usr/sbin/synaptic' at the alt-F2 command line. Note that it doesn't seem to matter whether I check "Save Password for Session" or not. The same happens for time-admin, users-admin, etc. I have tried reinstalling gnome-system-tools, system-tools-backends, and gnome-keyring with no effect. I have googled extensively and have found a few other people with this same problem, but no solutions. Note also that kdesu does still work fine, and there doesn't seem to be any such problems in KDE in general. Only in gnome and with gksu.
P.S. Let me know if you need any more info (output from commands, files, etc).
how to change the default language of gnome.when i boot into x-window ,i can select the language ,But ,if boot into console ,via "startx" to run the w-window ,the language is english,i can't select .my native language is Chinese.i set the right locale .I also searched for it .Someone told to add "export LANG=zh_CN.UTF-8"to $HOME/.xinitrc.there's no this file in my home dicretion.I create it .after that,when i run "startx",it's failed to start x-window.the ~/.xsession-error file shows
Initializing gnome-mount extension
seahorse nautilus module initialized
Unrecognized number formatter: cjk-chinese-simp
Unrecognized number formatter: cjk-chinese-simp
[code]...
how can i change the default language ,i have to .because if gnome is in English ,i can't run the Chines input method.
i recently got a french msi wind U100x running on linux suse enterprise 10 sp1. (i am french and wanted a light netbook with french keyboard)i am totally new to linux and i believe that msi wind is not helping.because i am more used to english for settings, i set the main language to english, but it seems that it automatically reconfigures my keyboard mapping to english as well, so that azerty becomes qwerty.i reset it back to french, so now my keyboard is french, but so is the system.is there a way to differentiate keyboard from main user setting language?
View 3 Replies View RelatedI just installed 10.04 and configured my Radeon 5570 to span my desktop across a pair of identical1600 x 1200 monitorsng the proprietary drivers (and Catalyst Control Center)After doing this I seem to have lost my previous panel configurations that included the Software, Administration and Preferences menu from previous desktop configuration.I am attempting to add the menus back but I cannot find an option to actually "add a menu"... only icon shortcuts to specific applications/utilities
View 2 Replies View Relatedjust recently upgraded to 10.04. After the upgrade I noticed that certain Administration menu items are msising. I can't find the "Hardware Drivers" tool. Is there a way to reinstall to put the complete files and correct the menu items, etc.?
View 6 Replies View RelatedI have currently configured Postfix as an SMTP server. I would preferably not use a domain name in my email address, like so: myname@[1.2.3.4]
I'm currently testing to see how other mail servers handle this kind of address. When I sent a mail with one one of my gmail accounts, I see that the mail gets rejected due to bad syntax.
It seems as though Google is giving me a RCPT TO address like so: myname@1.2.3.4 However, the postfix server rejects this address with the following error:
501 5.1.3 Bad recipient address syntax
To my best knowledge the only way to have an IP address inside an email address with to write it as a domain literal [1.2.3.4].
My question: how to configure postfix to accept myname@1.2.3.4 as well?
I have put both [1.2.3.4] and 1.2.3.4 in "mydestination" and 1.2.3.4 in "virtual_alias_domains".
It doesn't seem to work so far though.
I've created Live Debian USB image and it works well, but if I put an additional USB stick, then it's just read only. Howto configure Live Debian before rebuild an image to get fully USB support, i mean to write into other USB drives?
View 4 Replies View RelatedI have just upgraded from Lenny to Squeeze, and followed the D-I recommendation to upgrade to Grub2. However, the server will no longer boot - giving a 'missing operating system' error, so it's not getting very far in the boot loader process. I have read, in various location that Grub2 supports GPT, but my efforts to fix the situation have met with little success.
I have managed to boot the system using SuperGrub2 (recovery live cd) and can start up successfully from there. However, when I try to fix the grub installation using the Debian wiki recommendation, I'm met with:
<host>:/# grub-install /dev/sda
/usr/sbin/grub-setup: warn: This GPT partition label has no BIOS Boot Partition; embedding won't be possible!.
[code]....
The attached disk is 4.5TB of RAID 5 disk behind an Adaptec 5405 if that's useful.
I see 10.10 manages languages like 10.04.
I am English but live in Greece and although "I get by" with Greek, I do not read it very well and certainly do not write it. Consequently, I need to have everything on my PC in English. No problem so far but I do need to enable writing in Greek on occasion as the missus and bairns are Greek and my favourite little translator, GWord, obviously needs it.
I installed Greek language support and this resulted in everything being in Greek and me having to talk the missus through getting it back in English (she has trouble with technical stuff, bless her).
Just enabling translation and/or fonts etc in Language Support has no effect whatsoever.
I just want to press Alt+Shift and type in Greek, Alt+Shift again to be back in English and see my GWord (running under Wine) displaying no gobbledegook!
Does Red Hat Enterprise Linux 5 support the Polish language?
View 1 Replies View RelatedI'm done following this guide about Kernel Building. [URL] .... and I got done successfully, the .config file was the very default obtained from "make menuconfig" the only extra thing added was:
Code: Select allCONFIG_USB_EHCI_HCD_ORION=y
All dependencies had to be installed about 2GBs for kernel building to function properly, mainly due to the needing of kernel headers. It loads successfully on my desktop whether or not it needs that module (if it was added correctly) but my goal was to add xhci support so it will load from my laptop, still won't load from the laptop giving me a initramfs prompt. Adding that code line to the .config file didn't seem to do what I wanted.
Although since I did a "make-kpkg clean" command as requested by the manual I dont know if it used that line or not to be honest. since I think it deleted the .config file in its efforts to clean old configs so I don't know I'm new to kernel building.
I'm restoring an old TI Silent 700 terminal [URL] ... and have connected it to an RPi running the debian based Jessie release using a serial converter. After learning more than I wanted to about serial settings and support I now have it interfaced and communicating bidirectionally but have one last hurdle - proper support for a single case (uppercase only) terminal in agetty.
With the -U flag on it seems like the the login name is detected as needing conversion because lowercase login names work - but lower case passwords do not and once I get a bash prompt all input comes in as upper case. So the -U agetty flag only seems to apply to login name and is then forgotten (not passed on to login process or bash?) and various settings in stty like iuclc, xcase, iexten don't seem to work.
I'd really like to get this terminal working with native support but I'll also take a kludge of some kind (I've tried a tr pipe for example).
Here is what I think is the relevant portion of my systemd generator:
Code: Select all[Service]
ExecStart=-/sbin/agetty -U 300 %I $TERM
Type=idle
Restart=always
UtmpIdentifier=%I
TTYPath=/dev/%I
[Code] .....
Is there a way to programmatically determine whether a particular driver support is built-in rather than a loadable module? I'd be grateful if somebody would share how. I have written a shell script using the RTC (real time clock). I can check whether the rtc-cmos kernel module exists and load the module accordingly as needed, but I don't know how to determine when the driver is built-in. Of course, if the driver is built-in then the module does not exist.
I seem to recall there is a method to query the kernel config file (/proc/config.gz), through which I probably could grep for the CONFIG_RTC_DRV_CMOS parameter. I also can check whether /proc/driver/rtc exists. If that file exists then either the driver is built-in or the module was loaded.I realize the rtc-cmos driver is built-in with the standard Debian kernel build, but I still would like a way to query where the driver is supported.Is there a straightforward or direct method to query the kernel whether a particular driver is built-in?
I got a brandnew Acer Travelmate Timeline X (13"). I do not really know if this is the right topic for my problem. But here it comes: The Acer uses a special smart battery with special chips in it controling the powermanagement of the battery and the system. In general there is a kernel module to handle this (sbs). But for me this does not work.I am using Squeeze and it does not recognize the battery. It always acts like being on AC power. If I unplugg the AC it runs with the battery till it is empty. But the ACPI can not recognize the battery and can not read how much lifetime it has. I tried the reassambling method. But this method does not work for me. Nevertheless I think the reassambling method does not run because there is no more developing on it because of the kernel modul.
What can I do? Will I have to wait till a new workaround of sbs comes out, which can handle my battery? I read about a BIOS hack that disables the smart battery functions. Should I try this? But I am not really firm in that kind of stuff and I will loose the guarantee. Has anyone got an idea?
How to support english language in BrazilFW 3.x .
View 1 Replies View RelatedHow to enable multiple language support in centos?
understand that we need to install scim (smart common input method)
but if I install and choose only one language, what should I do after installation
from http://www.centos.org/docs/4/4.5/rhel-ig-x8664-multi-en-4/s1-langsupport.html
I guess right now after i install scim, I'll still not able to view other language (Asian Language) web sites
using squeeze and trying to install asterisk on it. after entering the ./configure command this error appears configure: error: *** termcap support not found (on modern systems, this typically means the ncurses development package is missing) i've tried to find the soultion in google, but i couldn't.
View 1 Replies View Related