I'm trying to send a .pdf file but before it completes sending I get an error "The server responded: 5.2.0 message size exceeds fixed maximum message size: 15728640 bytes E9210. Please check the message and try again."
View 6 Repliesin the middle of script, i need to send the output of (send command on line 8) to a file
#!/usr/bin/expect
spawn telnet 172.20.64.133
expect "ENTER USERNAM <"
[cod]....
i treid the below on line 8 :
1- send "show command;
" > logfile.txt : gives an error extra character after the "
2- logsave logfile.txt 'send "show command;
" ': error invalid command
3- i simply tried to send the output of the whole script to file logsave /home/logfile ./script : seems that logsave work under root only
4- ./script > logfile : the problem with this is that the output of echo or (read "enter your id") command will not be displayed on the screen (actually nothing will be displayed, i have to open the log file to see the output). is there any way to save the log of the "send" ? or to save the log of the complete script without hiding the output on the screen?
I am new to shell scripting.What i am trying is to write a shell script which take the input file and output should like as mentioned below.Output file should have data till SOK (marked in red)from every second line and then the selected data(marked in green) from 4th line.So selected data from 2nd and 4th line in one line of O/P file and then similarly selected data from 6th and 8th line in second line of O/P file.Input File:
3c3
< c1111;11.11.11.11;pOK;SOK:abcde;Universe:aa
---
[code]...
I am trying to get tftpd going in Ubuntu, and its kind of tough because I am new to Linux. I installed the tftpd software using packet manager,and I used this guide to configure it at this link,URL...Step number two must be asking me to make a config file. How do I make a config file. I cut and paste the script into a file I made by right clicking, but I am not sure if that was right thing to do.Also when I try to send a file is says no such file or directory.
View 1 Replies View RelatedI want to send a PGP encrypted file to a friend who (unfortunately) probably doesn't even have any idea what PGP is. He runs Windows XP. I know I can encrypt and decrypt PGP files easily and freely on Ubuntu, but I have no idea about how to handle PGP in XP... I tried downloading a PGP file in an XP virtual machine to find out, and Windows was pretty much unable to identify the file type. What kind of software on Windows (that is completely free and trustworthy) would be able to decrypt my PGP files?
View 9 Replies View RelatedHi ,
I created a socket.port no 21 meaning ftp client.
I am sending some stings and receviing some data from server.Fine.
But I want to send a file some x.c to host using socket.
Please can someone help me whether we can do it or not.
If we can how can we send a file.I was only able to send buffer and data but not a file.Please if possible can you help me with example.
Regards,
shaiva
I need to send large files from a Linux machine to another using cryptography. The sender machine knows the recipient IP but not vice-versa. I don't need strong cryptography and prefer higher-speed less-secure solutions.
There are no problems with presharing crypto keys but I'd prefer not dealing with SSH users creation.
I think to HTTP PUT over TLS, but I never had experience with it and I prefer to hear which are the possible solutions. I know that it can listen as a daemon but I don't know anything about cryptography. So pipeing with OpenSSL may be a solution.
I am currently using this command
Code:
apt-get install samba --force-yes -y > /sambainstall.txt This suppresses the screen output and sends it all to a text file, how do I have both?
I have setup CentOS as server and Fedora as Client.Now I want to transfer file from server to client through minicom.How to do that?I tried sending file from CentOs and it does have a ASCII format file transfer option while on the other OS only few like xmodem , ymodem and zmodem type of file transfer was present.
View 2 Replies View RelatedI understand how to get a file from an another computer using the sftp syntax
So i can get the file abc from comp2 to comp1
But how can I send a file cba from comp1 to comp2 using the sftp(I am still using comp1)
I have this problem.I need to do this:I got a small version of Linux installed in some small devices. These devices come from the provider with this small version of Linux installed.This devices should send data to some other machine in the internet. I have tested wput for this purpose with a PC which has an Ubuntu version 10 and it works fine. However, when I try wput in the small device, I get an error. It seems that the wput might need some libraries to work with the small version of Linux installed in the small device.The fact of using wput or not is optional. I just need being able to send files through ftp with this small version of Linux.The thing is that to be able to run wput in this small version of Linux, it seems that many of the needed libraries were missing. So what I did was just install all the needed libraries. But still the wput program fails in its first line.
View 14 Replies View Relatedhow can i send a text file from server to client? the problem is, i dont know how to send those two file to the client ( center node)
View 1 Replies View RelatedCould someone check this for me? I tried to send mail to localhost (ubuntu server) but when i tried to view it in log file, it gave me this:
Code:
xanios@ubuntu:~$ tail -f /var/log/mail
tail: cannot open `/var/log/mail' for reading: No such file or directory
tail: no files remaining
in my /etc/postfix/main.cf:
Code:
myhostname = ubuntu
alias_maps = hash:/etc/aliases
[Code]...
Is it true that the UNIX commands to send a file to a printer for printing are system-dependent?
View 2 Replies View RelatedI've got a Debian Squeeze computer on which the graphics have packed up, but the terminal in single user mode work perfectly fine.
There are a few files on this Debian computer that I want to transfer off, to a networked computer, but I have no idea how to do this.
The destination computer is a freshly re-setup Mandriva install, without (as yet) samba. I don't think it's necessary though. The Mandriva install works fine, has graphics, etc, but can't see the Debian Squeeze computer on the network, possibly because it's in single user mode, thus prompting the problem of how to transfer the files, using only a command line.
I want to mail a file to my yahoo or gmail id.is there any script or any possibility to do this.i have mail day to day server performance to my mail id in form of a text file.is this possible???
View 2 Replies View RelatedDevices are paired, sending files from laptop to phone no problem. I think, there is a problem with permissions to write into a public dir. Picture 1. Permissions settled for shared 'Public' dir. Picture 2. Grey-out options in Bluetooth 'receive file' dialog. What to install into system to resolve that issue? Or, is there another solution?
View 1 Replies View RelatedIs there a simple command line to do this, in an easy way?
View 1 Replies View RelatedI restarted a server yesterday for the first time in 2 years, but a shell script that send out an email every night via a mutt command line didn't work last night.
I don't know anything about mutt. do i have to start something in order for it to be able to work? is there a log i can look at to see what did or didn't happen making it not work?
I use the following code to send make-up file dialy via sftp with expect. When I run it from command line, it has no problem sending to the remoteSERVER side, but when it is running via crontab task, it did not do the put, so did not execute the batch file defined in -b option.
#!/bin/bash
#!/usr/bin/expect
curDate=`date +%Y%m%d`
filename="$RESULTS/make-up.${curDate}.001"
newname="make-up.${curDate}.001"
remoteDirName="/Inbound/PPP"
tempcmd="$RESULTS/tempcmdFiles"
[Code]...
Within PyGTK I'm using gobject.spawn_async to launch a bash script. I would like the output of that bash script to be displayed within my application. I have a textview set up to receive the text ...
Here are the commands that launch the program:
Code:
def run_command(command):
global keep_pulsing
keep_pulsing=True
(cpid, cstdin, cstdout, cstderr) = gobject.spawn_async(command,flags=gobject.SPAWN_DO_NOT_REAP_CHILD|gobject.SPAWN_STDERR_TO_DEV_NULL,standard_code....
Here are the two callback functions. But like I say ... I have no idea how to get that data from the 'cstdout' file descriptor into a textbuffer.
Code:
### THE FOLLOWING ARE GLOBALS:
textview = wTree.get_widget('textview1')
textbuffer=textview.get_buffer()
def update_textview_callback(fd, condition):
global keep_pulsing
if keep_pulsing:
progressbar.pulse()
code....
I'm not trying to setup a email server. ;) Firewall is set to disabled. SELinux is set to disabled.. How can i configure (which file?) the server to be able to send email out? When I try "mail -s testmail myemail@[URL]" and enter some text and then CTRL+D.. and return, I get command prompt again..
[Code]...
i am working on some kind of PBX and i have list of telephone numbers inside a file, i have to insert these numbers into the correct command and then telnet to a remote server and execute these commands. i can read the telephone numbers and insert them into the command with no problem, but when i try to insert these commands into the send i face problem. here is the basic code
#!/bin/bash
read msisdn < input
string="ZZZZ:MSISDN=$msisdn;"
[code]....
i can make external loop inside the Bash which read the input file and issue the command and then telnet and execute, but this will make the script connects and disconnects again for each line which cause high load on that server and hardwar problem. i am wondering if there is an option inside the expect interperter which makes the send read directly from a file... somthing like this:
expect "<"
send "input-filename
"
expect "<"
expect eof
I'm configuring an rsync between 2 machines, A_Server --> B_Server, using the following script:
Code:
#!/bin/bash
#
# Script de backup a trav�s de Rsync desde RMP-1 hasta RMP-2.
#
[Code]....
The Rsyn is working OK. What i need is to change one of the lines of the /tmp/prueba.txt before sending it to the remote machine (obviously not changing the file in the local machine), i mean, send prueba.txt to the remote machine deleting one line and adding another one...how can i do this?
I am trying to send data through a USB port to a printer which can recieve text file. Now to send the data to the printer I am doing echo "Hello World" > /dev/usb/lp0
but the data doesnt seem to be sent to the printer because I have an analyzer to monitor the data sent to the printer. Is there anything else which I need to do
I'm configuring an rsync between 2 machines, A_Server --> B_Server, using the following script:Quote:
#!/bin/bash
#
# Script de backup a trav�s de Rsync desde RMP-1 hasta RMP-2.
[code]....
Problems with Bluetooth. The dongle appears to be working, but then it craps out on me after only a few minutes!
I'm using the blueman-manager GUI to connect to my cell phone. If I load blueman-manager almost immediately after connecting my dongle, I can use it for a few minutes, but only long enough to add my phone, pair it and mark it as trusted. Certainly not long enough to send or receive a single file, though. Eventually and inevitably, the connection breaks, blueman-manager hangs/freezes up, and I start getting errors in dmesg.
Here's all the relevant diagnostic stuff...
Code:
Code:
Code:
I added the MARK myself to separate where the dmesg output stops immediately after plugging in the dongle from what appears after the connection is broken. It's right when that timeout error happens that the connection severs itself, and the error usually repeats itself several times.
Even if I just connect the dongle and not do anything except wait a few minutes, after a few minutes that timeout error will still happen. I'm running fluxbox and I don't believe I have any automounting programs, so there wouldn't be any interference from something like that.
I have the following working script. It checks the directory for txt files, if files are there, it copies to another directory or gives error. I would like to exclude "file not found" errors and send them to /dev/null. All other errors should go to the email address as usual.
Code:
#!/bin/bash
function err
{
if [[ $? -ne 0 ]]
[Code]....
I'm writing a script that will send an alert email given certain conditions. I have the impression that sendmail is what I need to do that. I just don't know how to use sendmail at all. I assume I have to set it up like a typical mail client so that it has a mail server to log into to send from.
I've looked through the man pages, but I can't find anything in plain English there on how to set it up, or how to use it once it is set up.
How long normaly keep the mail server send mails on the outbox queue and try to send? What about hotmail, gmx and gmail mail server?
View 1 Replies View Related