When I run WoW through wine there is severe graphical corruption. I am using opengl and have tried windowed/nonwindowed mode. No luck. Any assistance concerning this?
Here is a pic: [URL...ldofwarcra.png (I am running a w2k theme, this IS linux)
For the last month, when starting up or shutting down my laptop under Linux, I would get graphical corruption. Startup has an colour inverted, grainy rendition of what should be displayed while shutdown has a red background with all the text replaced by grey rectangles.
At the very least this affects Fedora, Ubuntu and Xubuntu. Windows is not affected. Outside of startup/shutdown the system is fine.
I'll say this first: we want to NOT USE WINE. we don't care how much WINE has advanced, want to avoid reliance on an outside program to run this.
I've been planning a game with someone and we want it to be able to run on linux (Umbuntu base) without wine. It should be able to also run on Windows as well, however.
The game will be a graphical MU* with combat and item systems. We have no budget- it's a shoestring sort of thing.
Here's what has been hashed out so far: Programed in C#, maybe with some .NET graphics will be 2D, however, a 3d effect is wanted for things like ascending and descending (Z axis) Partner wants to use Tom Shane's GUI library (Neoforce Controls) Partner wants to use flatredball as graphics engine I don't care what is used as long as it works without WINE
Here's the problem: Flat red ball uses Direct X and is not openGL compatible (that I'm aware of) and my partner wants the effects from the flat red ball engine. Also, the GUI library he wants is also not openGL compatible.
We need some other opensource or freeware graphics engine that can do things like flat red ball but still work in Linux. GUI packs are also nice. I Tried suggesting but Partner has issues with....Mono - Mono.XNA won't work directly using openGL - thinks it's "too hard" after playing with OpenTK even though I told him they aren't the same Java - too clunky Horde3d - Wouldn't even look at the link
We've only been working on planning stages and aren't too in-depth yet. Also, his former interest in making this run in wine without Linux seems to be dipping right along with a marked increase in wanting to rely on Microsoft.
I know how to manage them from a commandline but I was wondering if there are any graphical partition editors that understand and work with lvm2?
View 1 Replies View RelatedI'm not a Linux noob, but I am far from guru. I'm running a single board computer with a slightly customized Debian Etch (customized by the SBC vendor). No Gnome/KDE/X installed. My application is a control application which uses SDL (Simple DirectMedia Layer) to paint some basic graphics on the VGA. I need to run it as root because the application calls iopl() to access an IO port.If I run my application manually from the command line, life is sweet. From Googling around, I found http://www.debian-administration.org/articles/28, and hence I:1) Created a script in /etc/init.d2) Executed "update-rc.d scriptName defaults" to link the script into the boot sequenceAll very straightforward. My application starts at boot. But when I try to SSH/SFTP into the SBC, I get "Connection refused". So I can't manage the SBC anymore, and this is a big problem. I am not sure if it's relevant, but my application starts before the SSH daemon.My script looked like:
case "$1" in
start)
echo "Starting my application"
[code]...
when I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
View 1 Replies View RelatedHow can I uninstall / purge wine and any wine installed windows programs?I've tried deleting .wine (hidden folder)but in /usr/bin/ there are a number of wine related files.And wine sub menu still appears in Applications menu
View 6 Replies View RelatedBetween Intrepid and Jaunty, the database schema for Tracker changed from QDBM to SQLite FTS. This caused corruption problems for many, the only solution to which (as far as I can tell) was to delete the contents of .cache/tracker. Unfortunately I have many thousands of file tags which I'm not willing to lose, so that isn't an option for me. So I've stuck with Intrepid, waiting for a solution to come along. It doesn't seem to have happened yet.
So ideally what I'm after is some way to convert my file-meta.db file to the current schema, or a way of exporting and then re-importing my tags. Failing that, a way of running Tracker 0.6.6 under more recent versions of Ubuntu would do.
I'm having an interesting issue with my computer right now. It has Ubuntu lucid installed, which was upgraded from karmic shortly after it became available and was up to date as of September 1.
The issue is as follows: It will not boot the internal hard drive (250GB Seagate barracuda). When I select any of the kernels, it appears to be booting, but 6 Hours later, no joy. If I select any of the Kernels in recovery mode, it does nothing, so again no joy.
It will boot my 500GB removable drive via USB (Samsung on the inside), which contains a backup of my lucid (cloned with Clonezilla) from June-ish, but will not do so if the internal hard drive is hooked up, so I cannot access the internals contents while using the backup USB HD.
Now this is where it get's interesting, at least for me. It will boot up a livecd while the internal HD is connected, which was the only way for me to access the contents of my Ubuntu partitions in the internal HD. I have since pulled the Internal out, removed the USB 500GB HD from it's case, installed it into the internal HD bay, hooked up all the cables, turned the computer on and it did boot. While it did seem to take a long while to boot, I'm hoping this may be because it needs a serious amount of updates (294 updates, 485MB are ready via synaptic!). So I now have placed the 250GB Seagate into the USB HD case and can now access it, but the only contents that can be seen, are the items in my defunct vista partition and I cannot find any remnants of my Ubuntu installation, despite gparted being able to see all of the partitions.
I'm having a problem that I've not seen before, in that I ma constantly getting corrupted Ext 4 filesystems on my / and /home partitions. I am having to boot using a cd rom and run fsck -y on at least one of these partitions almost daily (mainly / partition)Looking at the system log, I'm seeing stuff like this:
04/08/11 04:28:37 PMValkyriekernel[ 28.090570] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
04/08/11 04:36:54 PMValkyriekernel[ 524.098006] ata1.01: exception Emask 0x0 SAct 0x0 SErr
[code]....
After I've upgraded to 10.04, the Korean text has become unreadable or very hard to read, on both KDE/Qt and Gnome/GTK apps. The text appears thiner and some characters/symbols are not fully rendered.
Has anyone encountered the same issue?
Update: In Dolphin and Nautilus the text is not rendered clearly, in Konsole is displayed just fine.
G`Day, I`m getting corruption of some kde apps in gnome. While k3b & vlc look fine, others like KRDC & kolourpaint are corrupted. Problem remains if I enable compiz or not.Ubuntu 10.04 nvidia card . Have two boxes (32 & 64 bit) both with nv cards, and problem happens on both
View 1 Replies View RelatedWhile using my computer the other day (I was sending an email) it suddenly turned off. I didn't get any low power warning, but I was running on battery and had my iphone charging from a USB port.
As I didn't think there was low battery, I just turned it back on again. As it was booting I saw the battery light flashing, indicating low power. I went to get the charger, but before I got it, mid boot-up it turned off again.
This seemingly damaged something hard-disk-wise.
Upon turning it on again it dropped into busy box with some message similar to this:
Quote:
No init fount. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built in shell (ash) Enter 'help' for a list of build in commands
(initramfs)
That's not the actual message (copy pasted from another post) but the message is VERY similar to that.
If I "exit" busy box, I get a load of message about "kernel panic" before it freezes up.
I have booted a live USB (what I am using now). I thought since it wasn't cleanly unmounted, simply mounting and unmounting would do the trick. I was wrong.
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I had previously ran e2fsck (after checking it was unmounted) but it wouldn't run also because it was reporting that the device was already mounted, busy, or being exclusively used by a process.
I don't want to do any more for fear of causing further damage.
I am astounded that such damage can be caused so easily!
I'm facing a big problem with a corrupted disk on my wife's computer after she hard resetted the box after it froze up solid.Upon restarting it dropped into Busybox reporting something like
Quote:No init found. Try passing init= boot arg BusyBox v1.10.2 (Ubuntu 1:1.10.2.2ubuntu7) built-in shell (ash) (initramfs) ...This is VERY similar to a problem I had just a few weeks back with my own computer - see this thread for details of that. From that problem I learnt a lot, so I thought this would be quite straight forward, but I've ran into problems.The first thing I did was get a live disk, I chose Ubuntu Rescue Remix. It's a command line interface, which I am ok with, but I can't copy/paste the outputs here....so I am currently downloading System Rescue CD.sda1 is the root partition, it is corrupted. I used dd to make a back up of that by mounting sda7, and dding the whole partition image into /mnt/sda7/sda1.img .This seemed to complete properly, but, when I ran e2fsck on that img file, it wouldn't complete, throwing up a lot of errors.
Code:
ubuntu@ubuntu:/mnt/sda7temp$ sudo e2fsck sda1.img e2fsck 1.41.12 (17-May-2010)
Error reading block 2129920 (Invalid argument). Ignore error<y>? yes
Force rewrite<y>? yes[code]....[code]....
When I download and boot into System Rescue CD, I'll be able to run some more tests, in the mean time,I really want to save this disk otherwise my wife will be back on Windows permanently.
Whenever I have an open OS-generated window (Software Center, Settings etc), the text will be corrupted if the window is scrolled. This can be restored by highlighting the text - and sometimes it will self-restore given time, but the corruption will reappear if the text is scrolled again.
The behaviour does not happen in program-generated windows, such as Firefox.
Dell 1340 Studio XPS, NVidea GT310 Hybrid SLI graphics.
I'm wanting to create a one-time snapshot archive of all my data in case something catastrophic ever happens to my main hard drive and my backup drive. I should add that I update my main backup regularly, which means that I wouldn't notice any creeping data corruption problems until it's too late...which is another reason a one-time snapshot is so important.Since I'm archiving a snapshot of all of my data at once, only a hard drive is big enough to handle the job. (I'll copy a small fraction - the truly 100% irreplaceable stuff - to DVD-R's too, but that doesn't mean I particularly want to lose any of the other stuff either.) Unfortunately, this means my storage medium doesn't inherently have any CRC's, error correction/redundancy bits, etc. built into it like data DVD's might.
So: What archive format would you suggest using for maximum reliability and resistance to corruption?My main concern is making sure that I can still open the archive and extract surviving files even if some of the bits (or the entirety of other files) go corrupt. This is my last-ditch fallback archive, so if I ever need to use it, I really, really don't want to get a message saying the archive is corrupt and cannot be opened at all! Because of that, it's important that the individual files and folders are compressed separately from each other...if at all. I don't care about the compression ratio, and I'd even be happy if the archive was 150% the size of my data thanks to a gigantic recovery record. I also care about CRC's and such, since I'll want to know which files/folders/etc. are corrupt vs. which ones are still intact.
I want to install Ubuntu (10.10) on the 1TB drive I need to unplug the SSD while installing it in order to dual boot by pressing F8 (the way I want it to be) so that Grub doesn't get installed on the SSD. What I want to know is can I partition the 1TB drive to install Ubuntu without any data corruption or anything? I have read that NTFS can lose data if partitioned with data already on it (I have no way of backing up my 100GB of files on the drive, as currently this IS my backup drive). What I want to do is have 900GB for files, and a 100GB partition (or partitions adding up to 100GB) for Ubuntu- what is the best way to do this? I don't need seperate partitions for ubuntu, can I install the whole thing to the 100GB partition and boot from it? Or do I need swap as well? I was thinking of making 900GB partition, 4GB partition for swap (if needed) and 96GB partition for Ubuntu (/ if I understand) as this is what the "erase entire drive" option creates.
View 9 Replies View RelatedI have a problem, my filesystem seems to show random corruption. For example:
[code]...
This has happened to many files, they suddenly contain random garbage. Fsck seems to say the filesystem contains no errors I tried to run it multiple times.
Installed Natty a few days ago and everything was working fine. I have a dual head setup with the left monitor rotated Clockwise 90 degrees (AKA rotate left). When I setup the the displays properly, instead of just cloning, I noticed a problem, making Unity unusable. When I apply the rotation either in the xorg.conf fle or using xrandr, the display shows a corrupt looking image. When I turn compiz off and use metacity instead it works perfectly fine.
Display Adapter:
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Cedar PRO [Radeon HD 5450]
xorg.conf:
Code:
Section "ServerLayout"
Identifier "Desktop"
Screen "RightScreen"
Screen "LeftScreen" LeftOf "RightScreen"
[code]....
I'm currently running a dual boot system of Win XP & Ubuntu 9.1. When first installed, about a month ago, all was working fine then I started running the update manager and for a while that was good also. Suddenly I started having problems, for example, I couldn't download new software. I kept getting a message about waiting on other software managers or something. (since the re-install that is no longer an issue). Next I was having problems installing updates for some reason. Apparently something got corrupted. When my wife tried to boot up the computer last night we got a message that had to do with the kernel and Ubuntu wouldn't load at all and I wound up re-installing the OS.
Obviously something got screwed up with some of the updates and now that I've got Ubuntu up and running again I'm afraid to download ANY updates at all. What is a person to do if you can't trust downloading updates from supposedly trusted sources? My attitude now is, if it ain't broke don't fix it.
while trying to get a game to work on wine I was surprised to find out that the wine version that ships with sid is 1.0.1 released in October 2005. So I installed the latest release I found at [URL] like this :
dpkg -i wine_1.1.42~winehq1-1_amd64.deb
The install failed, I think because I hadn't remove the old wine version, and that's when the joy-ride started. Impossible to remove wine to restart properly. (apt-get remove libwine wine and apt-get -f install didn't) After some googling I tried this :
dpkg -i --force-depends wine_1.1.42~winehq1-1_amd64.deb
This did install the wine version I wanted, and the game ran fine after that. However the result was a borked apt-get. Tried to remove wine again with the above commands, resulting in apt-get failing to do so because it tried installing wine-unstable and reported errors similar to these : E: Could not perform immediate configuration on 'wine-unstable'. see man 5 apt.conf under APT::Immediate-Configure for details. (2)
i want to install wine on rhel 5.plz send me wine installtion command.
View 1 Replies View Relatedmaybe my questions sounds funny: i'm looking for a very small (or better as small as necessary) distro which runs in a virtual box an starts wine.The reason is: we have new laptops in my school runnig windows7 64bit home and we have some software which runs only on WinXP. So why not take a virtualbox wich runs wine to start the old Software?
View 2 Replies View RelatedLot of questions about WINE... When I'm done I'm going to make a HOWTO so that others can do what I did It's hard work, but I'm nearly done.The last problem I'm having is the WINE menu on GNOME won't show up after a install of WINE from a .deb package (it usually does). This was after I compiled WINE from source and removed it with "make uninstall" and "rm -rf /.wine".So now I installed the WINE from a deb package and the Wine menu entry is not showing up.I've tried re-installing Wine and rebooting my PC but nothing seems to work.
View 3 Replies View RelatedI have a problem running a game on a fresh Slackware64 install.
Slack version is 13.37
I've followed alien bobs instructions for a multilib environment from here:[url]
And then used sbopkg to download and compile wine version 1.2.2, which went through just fine.
After that I grabbed cabextract from sbopkg and ran this: wget [url] sh winetricks d3dx9 To get the DX9.
But, when I try to run the game, this is the error I get:
Code:
The game it self ran perfectly on the 32 bit version of Slackware, tested with 13.0. So now I think I'm missing some libs or something, but I have no clue which.
I don't know if it's just my system, but after applying the latest Wine update, the mouse cursor in Wine windows is now purple/magenta/pink, whatever. Not a big problem, just annoying. I've looked through the various config files in ~home and /usr/share/wine, and can't find any parameter that might even remotely address this.
View 4 Replies View Relatedfixing a text corruption issue / advice for filing a bug report (if necessary). So, generally speaking the stability I am experiencing with Natty is as I expect; I'm fully aware that this is a very very early development release and so all sorts of things can go wrong. I just wanted to point that out So while Gnome/Unity are up and running, graphics run more or less perfectly, the boot process text is completely garbled and if after everything is fully loaded I hit Control+Alt+F1-F6 the text looks like:
* this
* the above image close-up
The above links are supposed to be of the ubuntu login prompt. The problem occurred after running the upgrade command:
Code:
sudo do-release-upgrade -d
As is standard upgrade procedure. Is there anything obvious going on that I can tweak to make it all happy again? Since I have a working GUI.
So I built a new system few months to act as a development/"mess around with" server with an Asus Mobo and a Q6600 processor and 8 gigs of ram. Along with file, web and app hosting, I also do some virtualization on it... or atleast I had hoped to.
Ever since the first install, I've been randomly getting crashes and lockups. Sometimes it would just dump an error to the screen but stay alive, and sometimes it would dump an error and then lock up fully. The error mentions something about "kernel not tainted" etc. I will post the detailed error once it comes up again, as I have just formatted it again.
Other problems include downloaded files becoming corrupt. Files downloaded through any means (wget, torrents, ssh, ftp etc.) seem to randomly get corrupted (ie: the hashes are wrong).
I currently have one WD 150GB raptor as my primary OS partition, and 3 WD 1TB greens as my storage in an mdadm raid 5 array. At first, I had thought it was the raid array or it's drives causing issues. After painfully transfering the data off of it, I took the drives out and tried to run ubuntu with just the OS drive for a while. This still had the same issues. I then put in only one of the 1TB greens and had the same issue...
I downloaded WD's hardware diagnostic tool and ran full scans on all the drives. They all check out fine.
I left memtest running overnight and it had no errors either.
Most recently, ubuntu would not even install. It would get stuck at the stage of partitioning, and the keyboard lights would flash. After much googling, I tried popping in "noapic nolapic" to the end of the grub string, and it managed to install.
Now, I'm in a fresh system and just wgetted vmware server. However, it wont untar, I just realized the MD5 hash doesn't match!
So definately not the memory or the hds... I'm assuming it has to do with the APIC? From what I found on google, it seems as though this is only needed for the install.
Do I really need this to be on the boot string too? From what I understand, APIC allows processes to be divided out to the least loaded CPU. Having a quad core, I'd rather leave this on since it seems somewhat beneficial... I have yet to try putting this into the grub yet since I'm offsite and need
As a side note, this latest install is using just the WD Raptor as an OS drive.
And I'll post up the dumped errors if I get them again. There were none dumped out when the vmware download corrupted. The message format is very similar to the one here: [url
However, sometimes it mentions ext3 (or one of the other filesystem types I had tried with thinking it was a problem with ext3) Again, the error message is not the EXACT same, however the format is very similar...
I am new to fedora and installed wine to see if I could get the sony reader software working (required to access sony bookstore from my sony ereader). Well the program did not work though it did create icons on my desktop. wine kept crashing and I said lets just get rid of it. I uninstalled wine via yum remove and nothing appeared to happen so I did rpm -qa |grep wine and saw lots of stuff. So I simply did yum remove wine* and then a rpm -qa |grep wine was empty. however wine is still under applications on my desktop and still has a category for programs--reader. I should also mention that while wine was installed I attempted to remove the reader via the wine uninstalller but a) wine gave a message of a core crash and b) all the uninstaller did was give me the option to reinstall the reader program. so now when I attempt to open an epub it tries with the sony reader software. I know I can just right click to use another program but for now I want wine gone completely from my pc and the sony program gone.
View 2 Replies View RelatedI installed Debian Lenny on a friend's computer which is an older Dell workstation. The install went well. I delivered the machine last week, got it set up in there house and all was fine. 2 days later they said it crashed with a black screen and lots of words they didn't understand. I get there today and rebooted. X would not start but it ran a whole bunch of automatic self tests but could not recover. I was able to log in as root and run fsck. That made the necessary repairs. I was able to reboot and log into the KDE Desktop. Hopefully they don't break it again.
I asked them what they did to it to cause it to freak out like that and they had no idea. So, as to my question, what causes something like that? I know there must be a log file somewhere on the computer that will give me some insight into the matter, but I'm not sure where to find the file.