Ubuntu :: Fail Shutdown With Ups Low Battery
Jan 24, 2010
I recently purchased a UPS (Tripp-lite Internet 550U)to shutdown my PC during a power outage when unattended. This model of UPS is connected to the PC with USB. Upon plugging in the UPS USB cable the Gnome Power Manager started up and it appears to correctly show the condition of the UPS. During a power outage it showed battery discharge right down to the battery going critical, but never shutdown the PC. I have set the options in the power manager for low & critical battery shutdow. Seems something is blocking the Gnome Power Manager from shutting down, but I have no idea where to start looking..
PC: Abit mobo with Phoenix bios
Ubuntu 8.04
UPS: Trtipp-Lite Internet 550U
View 5 Replies
ADVERTISEMENT
Jan 17, 2011
I run Ubuntu 10.04 on a HP dv2000 laptop with 2GB RAM. I see a strange problem with my system. When running on battery and the level hits about 43% (+- 1%), the system shuts down suddenly. No warning and no information in logs either. Temperature of both cores are below 50 C. I have tried cleaning the dust withing the laptop chasis but no progress.
I have done quite some research on this and other forums but haven't found anybody else with similar problem.
View 1 Replies
View Related
Jul 13, 2011
I have looked all over the place but I can't find if this is possible. I am running Debian 6 as a media server (SMB) and it is tied to a UPS, I used gnome power management to set up a low battery shutdown but this UPS also is powering another embedded computer. So, I was wondering if it was possible to have a script run (to log in and shut down the embedded system) before gnome power management shuts down the Debian server. I know I could probably get it to run on every shutdown, but I am looking for low power only.
View 1 Replies
View Related
Jul 1, 2011
is there a way to configure shutdown on critically low battery to give me a bit of time before actually shutting down?I've set Gnome to shutdown on low battery. Problem is, I don't get any notification about battery running low, and as soon as battery level reaches the critical threshold, the system starts shutdown without me having any possibility to quickly complete some tasks. Of course, I'd increase battery level thresholds accordingly.
View 3 Replies
View Related
Dec 30, 2009
Broadcom 4312, dell inspiron 1545.Earlier i was running on battery power and the laptop shut down when the battery got low. When i got back to it and restarted there was no wireless network. It's grayed out and says wireless disabled. How do i fix this?
View 1 Replies
View Related
Aug 28, 2010
I'm trying to make my system automatically shutdown once the battery level is low, but still without success. I've tried kpowersave, gnome-power-manager, kpower, klaptop but none of these worked for me. Well, I can't imagine I would be that stupid, but simply it doesn't work. In all cases mentioned above (kpower, klaptop, gnome-power-manager) I've tried to setup the laptop to shutdown once the defined level is reached, but the laptop never actually switched off unless all the battery was drained.
Btw. I think all the above mentioned apps only work once the user is logged in. But I'd like the solution to work also when the PC is on without anyone logged in. I thought I could write a bash script based on parsing of acpitools output and define it as a service, which would monitor the battery level, but I simply don't believe there isn't any functional solution to this.
View 3 Replies
View Related
Aug 8, 2010
I'm trying to make the power manager NOT automatically shutdown / sleep / hibernate when battery power of my laptop reaches critical
I am surprised there isnt an 'NO ACTION' option for that in power manager
I've tried editing the acpi-supper in /etc/default bu couldn't find a solution in there nor in the /home/user/.gconf/apps/gnome-power-manager/ directory
View 7 Replies
View Related
May 1, 2010
Just installed 9.10 followed by a 10.04 upgrade (wouldn't work as a 10.04 clean install). The install and upgrade all seemed to go well.
But now when booting I get a message saying "checking battery state" and then it boots no further. This is a laptop without a battery installed, running permanently from the mains through the charger.
How can I disable this check so that the laptop will still boot without a battery fitted?
View 5 Replies
View Related
Mar 2, 2010
getting back to our laptop, the stability window is ~3.2V. Meaning that when you operate the battery above this the electrolyte is oxidized on the positive electrode and reduced on the negative electrode. Remember that we only want to oxidize and reduce the active materials and don't want to do anything else. All these reactions other than the ones we want are called side reactions and these are really bad for the battery. The nominal voltage of a laptop battery is 3.7 V which means that something bad wants to happen as we use the battery.So long story short, stuff (e.g., passive layers and poor kinetics of reactions) happens and things are not as bad as they seem and you can increase the voltage up to 4.2V without bad things really happening. All chargers for Li-ion cells today cut the battery off when it reaches 4.2V. What you have to realize is that at 4.2V, these side reactions are present in finite amounts and start to chemically kill the battery, but its not that dramatic.
Operating to 4.1V makes things better and extends the life, 4.0 V is even better and so on. So why don't battery manufacturers cut the voltage off at, say, 4 V to get better battery life? Because every time you cut this voltage down you decrease the capacity of the battery and its run time. The 4.2V cutoff is a compromise between good run time and decent (read "not pathetic) life.On the other hand, if you charge the battery and then pull the plug (so to speak), the battery discharges some, the voltage drops, and these reactions become less of a problem and your battery life goes up. So the best things you can do is to charge the laptop (or cell phone, camera etc.) and once its charged, pull the plug. Your battery will thank you for it.As a matter of fact, if you own a Lenovo Thinkpad, you can actually change the state of charge to which you charge the battery using the Battery Maintenance utility. You can change this from charging to 100% state (where the voltage is 4.2V) to 90% so that your voltage is less. You lose some energy is doing that, but atleast you can change it to 100% when you need battery power and put it back down to 90% when you can plug in. I wish my Mac has the same feature.
I typically use the battery for a while (say 1/2 hour to 1 hour), then plug it in and wait to fully charge it, then I pull the plug and use it again for 1/2 hour to 1h and then I repeat this. Takes some getting used to and I forget to do this, but I try.
View 1 Replies
View Related
Aug 31, 2010
I have a 3 year old laptop with the original battery and its drained pretty bad. The "Battery may be broken" popup was driving me insane and this is how you disable it, in case you are in the same situation as me. Open terminal
Code:
gconf-editor
Drill down to...
apps --> gnome-power-manager --> notify
uncheck the low_capacity checkbox. This should disable the popup for you if your battery has little life left in it. Now, if any knows how to disable the Avahi popup, let me know.
View 3 Replies
View Related
Jul 13, 2010
Is there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
View 6 Replies
View Related
Dec 10, 2010
I have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
View 1 Replies
View Related
Jun 30, 2010
when my pc boots and shuts down my monitor goes into 'input out of range' mode for a bit between the gui and the text only phases of boot/shutdown.is there a way to fix this? or where to start troubleshooting?also, when it shuts down it hangs after coming back to the text only part
View 4 Replies
View Related
Feb 5, 2011
Recently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
View 2 Replies
View Related
Jun 20, 2010
I cant shutdown without running sudo shutdown. When I try to use the default gnome shut down it takes me back to the logon screen. Fresh install today and I've had the same problem on other installs.
View 9 Replies
View Related
Sep 7, 2010
Ubuntu will randomly pop up the shutdown menu and then shutdown.It seems to happen when im in firefox and typing and it has been difficult to replicate. I dont think it is a temp issue since watch sensors shows temmp of 40-50C. Someimtes it happens every minute someimtes i can go 10min without it happening.
Dell Inspiron 1525
ubuntu 10.04 (only os on system)
View 3 Replies
View Related
Dec 10, 2010
looking for a command that shutdown/reboot my ubuntu just same as process that happened when I press shutdown buttonIn fact I need to close all programs that are running and then PC shutdown (that happened when I press shutdown button).
View 9 Replies
View Related
Apr 22, 2010
I cannot locate shutdown log for Linux shutdown to check various activities carried out during shutdown. I can view Startup Log which is availble on console>Applications>System Tools>System Logs.
I have included Shutdown/Startup in dbora, so that Oracle 10gR2 Shutdown/Startup will be automated during OS Shutdown/Startup.
I want to check Shutdown log because Oracle Shutdown was not running, as from $ORACLE_HOME/shutdown.log contains no entries, where as startup log contains latest startup details.
That means here 2 issues are there. One, I want to locate OS Shutdown Log and the other being Why Oracle Shutdown not getting executed.
View 2 Replies
View Related
Mar 12, 2011
I did a live upgrade from 11.3 KDE and observe a following issue.When I press the shutdown button on the laptop it initiates the shutdown and shuts down fine but after a significant delay of time (something like 30 seconds). When I click the shutdown button in KDE it initiates the shutdown instantly. This was not the case in 11.3 where the shutdown worked the same regardless of the method that triggered it
View 6 Replies
View Related
Mar 30, 2010
I'm trying to reboot the server (shutdown -r now).But it seems like nothing happened.
When I try "shutdown -c", the system prompts "shutdown: cannot find pid of running shutdown."
View 5 Replies
View Related
Nov 24, 2010
My battery Icon dosn't showup.
I did
Code:
I recieve back
Code:
Traceback:
And I also did
Code:
View 9 Replies
View Related
Apr 30, 2011
I just upgraded to Ubuntu 11.04 on my Acer Aspire One netbook and no longer have a battery applet on the top bar. I used to have one on 10.10 but not now that I've upgraded ... I have tried going into power preferences and i couldn't get it to work.The Power Manager options suggest that there is no battery present which is obviously not the case...
View 6 Replies
View Related
Mar 25, 2010
Further to this LQ thread which Tinkster solved by suggesting the last command (thanks Tinkster) I have been exploring last -x reboot and have found that the reported duration is incorrect for the last reboot and shutdown when a old wtmp file is used. Not having a record for the following shutdown, last assumes that the system has been up until the current time and similarly for the shutdown.
The output comes in time order, latest first, each line showing the time of the reboot and the uptime from then to shutdown. Using last -x reboot shutdown to show the shutdown time, here's an illustration
Code:
shutdown system down 2.6.29.6-smp Sun Mar 7 15:35 - 03:02 (11:27)
reboot system boot 2.6.29.6-smp Sun Mar 7 09:35 (05:59)
09:35 until 15:35 is 05:59.
When the uptime exceeds 24 hours it is shown as (<days>+<hours:minutes) like this
Code:
shutdown system down 2.6.29.6-smp Sun Feb 21 12:39 - 13:20 (00:40)
reboot system boot 2.6.29.6-smp Sat Feb 20 09:39 (1+02:59)
09:39 until 12:39 the next day is 1 day 02:59.
The time in parentheses at the end of the shutdown lines is normally the time until the next shutdown.
So far so good. The incorrect output is for the last reboot and shutdown of an old wtmp file. Here's the output of last /var/log/wtmp -x reboot shutdown; last -f /var/log/wtmp.1 -x reboot shutdown
Code:
[snip]
reboot system boot 2.6.29.6-smp Fri Mar 12 07:42 (01:54)
shutdown system down 2.6.29.6-smp Fri Mar 12 01:31 - 09:37 (08:05)
wtmp begins Thu Mar 11 08:25:26 2010
[snip]
reboot system boot 2.6.29.6-smp Wed Mar 10 14:12 (15+01:42)
shutdown system down 2.6.29.6-smp Wed Mar 10 12:41 - 15:54 (15+03:13)
[snip]
The boot started at "Wed Mar 10 14:12" which had an actual uptime of 1 day 11:20 is reported as 15 days 03:13 which is the time from then until the last -f /var/log/wtmp.1 -x reboot shutdown command was issued. The time from shutdown to shutdown is similarly affected.
View 1 Replies
View Related
Jan 8, 2010
wanted to remove one of the informative symbols, at the top right of the screen next to the date/time, i right clicked it and went 'remove from panel' and all my symbols including the battery level and network connection indicators. I cant seem to get them back and their not in the 'add to panel' list
View 4 Replies
View Related
Feb 23, 2010
Is Ubunutu better than Windows 7 for general battery life?
View 9 Replies
View Related
Mar 26, 2010
When I was using Windows XP, my notebook was beeping very loud when it was running out of power. Since I use Ubuntu it doesnt. I have tried kpowersave but it somehow cannot play ANY SOUNDS. Now I use default power management and it doesn't beep too.
How can I fix it? Its quite important because I often forget to hook it up.
View 3 Replies
View Related
May 12, 2010
So, I never got great battery life with 9.04 or 9.10, but it was acceptable. Here's the thing, with Windows 7 I can get about two hours. With Ubuntu I'm lucky if I get an hour, and I mean really lucky. I have selected to dim the brightness and to spin down the HDD when possible, it hasn't helped a whole lot. What I don't see is an option to underclock the CPU, which is done rather easily in Kubuntu.
View 9 Replies
View Related
Jun 6, 2010
I installed 10.4 a good few weeks ago and was worried when I didn't see the volume controls in the main panel, so I took someone's advice and added an indicator applet, you know the one with the volume and mail symbols? Today then my computer just switched off when it had insufficient power in the battery (I didn't realise it wasn't plugged in) but I got no warning that it was low on power.
Two things then, is there a better applet for volume and one at all for the battery so I can get some kind of notifications?
View 7 Replies
View Related
Aug 17, 2010
I've recently installed 10.04 on my laptop and spent some time configuring it. A while ago I've noticed that there are now two battery icons in the panel in the top-right corner. One seems to be attached to the indicator applet and the other one sits by itself. Changing the settings in the Power Management menu affects both icons in the same way (I can either show or hide them both). Is there any way to remove the extra icon and just keep the one integrated into the indicator?
This is a very minor annoyance really, but it'd still be nice if there was a fix for it.
Update: Now the battery icon in the indicator applet has changed to the chat "evelope" icon, but it still acts as a battery icon (same menu). Something is definitely not right here...
View 2 Replies
View Related
Aug 20, 2010
I just got a new Acer Aspire One notebook, and first thing I did was get RID of windows 7 starter crap, and put on Ubuntu 10.04. Everything runs smoothly and works well except one thing, Ubuntu doesn't seem to recognize I have a battery, it behave's like it would on a desktop. This is really bothering me as I need to know my battery life and whatnot. Does anyone have any idea why this might be happening? Im completely up to date, and I also tried booting up in the live version of 9.10 and it didnt recognize a battery either, i fear if i cant get this working I might need to use Win7 Starter...I was looking forward to Ubuntu.
View 4 Replies
View Related
