In 10.04 I was able to plug in my MP3 player and move songs to and fro in Banshee or rhythmbox. Now, I can mount it, but it freezes banshee when trying to access it from banshee (it does appear in the list).
View 3 Repliesyesterday I upgraded of my ubuntu release from 10.04 to 10.10 and now, when I plug my mp3 creative zen player it doesn't work.The same player works very well with 10.04 and I can upload my mp3s directly from rythmnbox using drag&drop.Here my /var/log/syslog
Code:
Oct 20 15:58:20 tarini-laptop kernel: [25042.100344] hub 4-0:1.0: unable to enumerate USB device on port 2
Oct 20 15:58:38 tarini-laptop kernel: [25059.970030] usb 1-1: new high speed USB device using ehci_hcd and address 16
Oct 20 15:58:38 tarini-laptop kernel: [25060.102634] usb 1-1: device descriptor read/64, error -71[code].....
When logged in as my normal userid to OpenSuse 11.2, I cannot get Banshee to recognize my Creative Zen MP3 player. The player does appear as a device on the desktop and I can access files on the player through that icon, but cannot get Banshee to recognize it so it can be managed in Banshee.If however, I log on as root, Banshee recognizes the device without a problem.
The log file in ~/.config/banshee-1 shows the following:
libusb couldn't open USB device /dev/bus/usb/001/004: Permission denied.
libusb requires write access to USB device nodes.
[code]....
Is there anyway to sync my mtp device? I use Rythmbox and quite like it. It will let me drag and drop songs onto my MTP device. What I'm looking for is a true sync. Something that will delete from the device if it's been deleted from my library. Or update, or anything really. Just a sync, not a drag and drop.
View 14 Replies View RelatedI've been trying to get my palm TX to sync with kubuntu 8.10. Quickly after I place the palm on the cradle I get a warning msg that I've attached below. I did follow some directions at one point where it required me to install visor. It had sync'd a few times, but then it started giving me these errors. Eventually I tried to delete the device, etc.
The msg:
Failed to connect using device 'Cradle', on port 'usb:'.
Check your confirguration, as you requested new-style libusb
'usb:' syncing, but have the old-style 'visor' kernel module loaded.
You may need to select a 'ttyUSB...' device
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
I have just got a new iPod Touch 4th generation, currently running iOS 4.1. I am having difficulty syncing it with Rhythmbox (or any application!), as it seems to go un-recognised! It currently is not jailbroken.
Is there any way to mount and sync music with this iPod? My old nano used to work just fine in Rhythmbox.
When I try to mount a linux file system that was encrypted using cryptsetup I get the following error:
debian:/# mount /dev/sdb3
Command sukey slot 0
mount: u moet een bestandssysteemsoort aangeven
mount failed with run_sync status 32
Command failed: Device busy
mount.crypto_LUKS(crypto-dmc.c:168): Could not unload dm-crypt device "/dev/mapper/_dev_sdb3", cryptsetup returned HXproc status 240
"mount: u moet een bestandssysteemsoort aangeven" is dutch for
"you must specify filesystem type"
I've got Ubuntu One syncing a single 25MB folder on 4 computers. On one of these computers, the ubuntuone-syncdaemon process constantly pegs the CPU, using from 50-80% long after any sync-able files have been modified and successfully synced. The process is only using 8.9MB of RAM.
Specs:
Ubuntu 10.04 (lucid)
Kernel 2.6.32-24-generic
1000.8 MB RAM
Pentium 4 2.53GHz
Free disk space: 280.9 GB
System monitor shows 56.8% total RAM usage, 15.4% swap file usage.
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps, the parameter is the maximum samples per second by which the audio is changed. -async 1 is a special case where only the start of the audio stream is corrected without any later correction.Searching the net makes one believe that this command is just some sort of magic.People just put it in the line and it just works. Isn't that nice?
It says nothing about how to change the TIME the audio starts syncing. Like do I want it to start 5 seconds delayed? Or what about 5 seconds sooner?What if the audio gets more out of sync as the video goes on? Can I slip it a little at a time? What? No magic?No one mentions a file that already has badly synced audio.So what -async 1 really does is simply start the audio at the beginning of the file. LIKE AS IF THAT ISN'T STANDARD PROCEDURE?So what is the exact solution to syncing a messed up video? And why can't it just do the proper "timestamp" sync in the first place?No docs, no info and you are left out in the cold.
I use jpilot on opensuse 11.3 64bit to sync pim data with my Palm Treo 680 via bluetooth. This worked fine until today. Now I get the following error message when I try to sync: Syncing on device bt: Press the HotSync button now dlp_ReadSysInfo error Exiting with status YNC_ERROR_PI_CONNECT Finished.
The last successfull sync was on the 20th October and today is the 24th October. I did not change any settings in jpilot or on my palm device. So I guess there must have been an update of opensuse which causes this error. But I do not now how to look up the updates during this period or how to undo them. Was there an update between the 20th and the 24th Oktober, which might affect either jpilot or bluetooth functionality?
Cant I get rid of the window which says "authentication required to mount the device" every time when I try to open a common drive?
View 1 Replies View RelatedOS: Ubuntu 10.04 (in VirtualBox virtual machine) how to mount a device for all users. I tried everything and can mount it only for root.
I'm trying to mount shared device in VirtualBox virtual machine.I added record in `fstab` file:
shared /mnt/shared vboxsf rw 0 0
I got /mnt/shared permissons: drwx------I've tried to add options 'rw,user' in fstab, but the option 'user' is not supported by mount program in my system.
I've discovered Firefox Sync a while ago, and it's absolutely awesome. Now of course I'd like most of my software to work this way! So is there a way to get the same behavior with Thunderbird?
View 1 Replies View RelatedI installed ifuse (a utility to mount your iPhone or iPod touch via the USB cable) and I want this to be the default way my iPhone is mounted when I connect it. Currently, when I connect it, it gets mounted by the gvfs (Gnome virtual file system) at ~/.gvfs/iPhone. Either one change should be made (the 'default command to execute when this device is connected') or two changes (tell gvfs not to mount, and tell ifuse to automount). I don't know how I can get this to work.
View 5 Replies View RelatedI am trying to expand my Ubuntu partition into my Windows 7 C: drive, but the win7 partioner will not let me shrink it because of immovable files. Is there anyway for me to but an loopback device in the windows partion, and have Ubuntu boot with that as the root device?
View 1 Replies View RelatedI'm developing a little script that automatically detects the insertion of a usb device and tries to open the directory of this device in nautilus. I am using Python
So far I was able to sample and compare the changes that occur in the output of 'lsusb' command and get information pertaining to the addition and removal of usb devices.
Now I want to know if we can use that information (or some other info present in the usb sybsyste --/sys/bus/usb folder) to determine exactly where this device has been mounted.
I know you might recommend using 'mount' as a quick way to do the same. I have already done that, but the limitation is that mount only gives u the mountpoint information. How does one (using a program/logic) determine which mount point corresponds to which device.
If I were to plug in two devices together, and both were automatically mounted, how will I be able to tell which mountpoint corresponded to which device? the output of lsusb provides no information whatsoever about where the device is mounted. So its kind of a deadlock
from lsusb ive been able to gather : Device name, serial and bus number and device number
Another thing i've noticed is the 'autoplay'. Whenever I insert a my music player into my computer, it gets mounted automatically and I'm presented with options about simply opening the file or playing it with rhythmbox... now if all that was being done was polling the output of mount, they would not be able to know that the device inserted was a music player (that info u can get from the /sys/bus/usb folder only using the device class and subclass info). So obviously the two are linked somewhere...
Recently installed some minor software, some games and Ubuntu Tweak, I am not sure if that's what caused this issue or not. I shutdown after the installations, then when I tried to start back up the small, white ubuntu logo appears just like it normally does, then it just goes to a black screen. I turned off the computer and restarted in (Recovery Mode). It goes about its thing then it says it is waiting for root file system, then after about 30 seconds it says "Gave up waiting for Root File System" how to fix this without reinstalling?
View 2 Replies View RelatedThe CD-ROM on this computer, my ubuntu laptop, does not seem to be working properly. It works on and off. I burned a .iso image yesterday but today I can't get it to even read the CD in my drive. I just want to read the CD to see if it is the Ubuntu Live CD I burned a while ago or if it is the Vista Recovery CD.
TL;DR: CD-ROM isn't working properly. When I click on the drive this is the error.
Code:
mount: special device /dev/scd0 does not exist
P.S. I am trying to get Windows Office to install using Wine because I am tired of windows. I know that open office is great. but I have to have excel 2007 and word 2007 for school.
I've just upgraded to the new version of Ubuntu (10.04) and I've got a problem with the mounting configuration.
My PC access to a NAS server which is running samba. Everything worked great before upgrading
In the /etc/fstab, I added the following line :
Code:
//nas/share /mnt/share auto credentials=/root/.smbcredentials,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
and the system always replies :
[Code]....
Sometimes when I restart, my NTFS drives will mount in incorrect directories. It seems to only happen when I plug in USB devices such as flash drives, and keep them in when I boot. I have the fstab file configured correctly, but it still resorts to some odd default mounting points. Edit suposedly the device name changes whenever I boot with a flash drive plugged in. Is there anyway to mount a disk to a dir without pointing to its changing device name.
View 3 Replies View RelatedI just plugged my phone containing a new SD card (bought this morning) to my PC, in order to transfert some data. The problem is that the device is detected in lsusb but doesn't appear in fdisk output (otherwise I could mount it by mount /dev/device_name /mnt/temp). It doesn't appear in GParted or as desktop icon, even after rebooting my PC keeping the device plugged in.
Is it possible to mount the SD card using the lsusb ID? Here are my outputs (the device has ID 0fce:01a7)
Code: Select allroot@dynamic:/home/dovah# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code] .....
I'm trying to mount my NAS device via NFS with suse 11.1, but up to now it failed. The NAS does support NFS, but it requires a UID and a user name and up to now I could not figure out the correct nfs mount options for that.
If I just make mount 192.168.0.2:/nas1 /mnt a get the error message "mount.nfs: access denied by server while mounting 192.168.0.2:/nas1". So can somebody please tell me the correct options for user name and user id which the mount should use. And, preferable the correct entry for the etc/fstab file to make this mount being executed automatically during startup. I studied the mount(8) and nfs manpages several times, but I do still have no idea how to make it.
How can I find which /dev/? device to mount my USB hard drive on redhat 3 taroon, I've been googling a lot and checked log files and still no clue. I'm trying my last chance with you experts, # /sbin/fdisk -lgives nothing about the USB drive
# lsusb -vv
Bus 004 Device 005: ID 059f:0951 LaCie, Ltd
Device Descriptor:
[code]....
Current stable Debian runs on both machines. I connect a digital camera to the USB on the server ("a") and the camera's filesystem is mounted automatically.I want that same filesystem to be made available to the other machine ("b") through nfs.What should be in fstab for that filesystem, or is something else needed in the configuration for "b" in order to access the filesystem which is physically on "a"?
View 5 Replies View RelatedI am trying to set up my usb device to be available to mount and umount only for me, not for other users. Using Slackware 12.2Entry in fstab is as follows:
Code:
/dev/disk/by-label/USB /media/usbvfat auto,group,user,noexec,gid=usb,umask=007 0 0
device information:
[code]....
I posted a similar problem sometime last week...but a little has changed(mainly I can access my files now): I recently performed the auto upgrade to Ubuntu 10.04 and upon restart of my machine I am presented with 3 screens. The first is a simple "GRUB loading". The second is "mount: mounting none on /dev failed: no such device". The third screen is a series of initializations, i.e. /dev/sda1:
clean, (number of files), (number of blocks)
*setting preliminary keymap...
and so on until it hits the line:
*checking battery status
at which point it will cease loading until i press the power button. The next thing that occurs is it kills all the processes it just initialized and shuts down the computer. I read that this is likely a problem from loading the wrong kernel and I can get into my files (using a boot 9.10 boot key). The problem is I don't know what files to change in order to get my system booting the right kernel.
I got a sort of usb connected device(not an external enclosure) so i can connect a sata hard drive into a machine that only has ide connections but the drive is not mounting. I am not very good at mounting slave hard drives anyway ,,,,never been able to get one happening without help. I am wanting to read this drive as i killed another desktop machine(i think the mb) and i need the data off the hard drive. The drive is shown in a directory and in the media directory. Can't think of what else sorry as i am so tired from testing everything out of the machine that i killed.....
View 4 Replies View RelatedI used dual booting with Windows Xp and Ubuntu 10.04. Because errors, I reinstall Windows and then I could not enter GRUB, and Ubuntu partition disappear. I tried to reinstall ubuntu using live CD but I could not detect last ubuntu partitions. After I installed fresh Ubuntu on new partition, I got error message like this:
Unable to mount floppy0 Mount: block device /dev/fd0 is write protected, mounting read-only Mount: could not determine the file system type, and none was specified
since I installed fedora 13 in my laptop, every time I want to access my windows drive it asks for root password to authenticate! I know there must be a way to fix this issue, i did this in my Fedora 10, but I forgot how I did it.Can anyone plz help me, so that only one authentication is sufficient, every time I restart/ start it asks for authentication which is very boring and I hate this
View 6 Replies View Related