Ubuntu :: Configuring Network Interfaces At Startup Takes Too Long?
Jul 1, 2010It took almost one minute.How do I reduce the time?Also how do I undo the changes for update-rc.d networking defaults
View 2 Replies
ADVERTISEMENT
CentOS 5 :: X/Gnome Takes Long Time To Load And Sudo Takes Long Time To Execute
Oct 13, 2009I am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.
I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.
A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.
I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.
OpenSUSE Network :: Can't Connect To Internet - Takes So Long To Boot
Jan 3, 2010I use openSuse 11.xx and all was going fine until yesterday. When booting up now, I can't connect to the internet any more. I takes much longer to boot now as if openSuse tries to look for something that disappeared or got corrupt. All started with the latest safety update.
View 2 Replies View RelatedRed Hat / Fedora :: 15 Takes A Long Time To Connect With LAN Network (Samba)?
Jun 16, 2011The Fedora machine acts like print and file server.But the problem, its the conection time.When i start the machine with fedora, takes like five or more minutes to appear in "My network places" in the windows machines, and if the server dont appear, i cant print and browse in the server files with the windows machines.I can browse in the internal network files (Windows folders) from fedora all the time, i have internet conection and with the internal network all the time, but the server just dont appear in the network places in the windows machines when i just start the server.
I check the samba status when i start (in the terminal), and its running.And i have a control program called "Control of Ciber", this program connect with the "Slaves" terminals and the conection appear in the server, but when i just turn on the server, the machines appear offline, and they connect after the same time taken for the server to appear in "My network places" in windows.I dont know if have a relation, but i cant open the share folders of the fedora machine in the windows computers, a error dialog appear (Privileges problem), and i just cant see the files in the folder.I give administrator privileges to everyone in this particular shared folder (Chmod 775), and i put the "Security = share" in the samba file. This issues dont happen in debian or ubuntu with the same configuration
OpenSUSE Install :: Shutdown Takes Very Long Time - 2 Min - Possibly Due To Network ?
Oct 21, 2010OS: OpenSuse 11.2 64 bit
Machine: HP 8540p i5 4Gb
Shutting down my machine takes a very long time! Not convenient when one want to pack his laptop (I don't dare to when the fan is still blowing).
Upon shutdown, I press 'esc' and see what's happening. The last commands seem to hang. First, shutting down the network interfaces seem to last long than needed (eth0, pan0, wlan0). Sometimes, it stalls also on "networkmanager disconnecting from DBUS" (or something like this ) (which is the very last command executed). Hmm, I will write the exact command down.
Debian Configuration :: Squeeze Hanging At Configuring Network Interfaces
Dec 20, 2010Alright, every time I boot or shutdown my routing box, it hangs at configuring and deconfiguring network interfaces. Below is my interfaces file. I see no errors or warnings in my log and I am running a pure kernel, not tainted with proprietary drivers. All of my hardware is 100% supported.
[code]...
Debian Configuration :: Wheezy32 Boot Hangs - Configuring Network Interfaces
Jan 6, 2016As above, my wheezy 32bit hangs at boot. the last few lines displayed are
Code: Select allMounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files...
Setting kernel variables ...done.
Setting up resolvconf...done.
Configuring network interfaces...
[Code] ....
I removed the files from /etc/network/interfaces.d/ just in case. i still can't boot up.
Resolved (I think) as on this post: [URL] ....
OpenSUSE Network :: IPv6 Getting A Global Address Takes A Long Time - Possibly Only After Starting A KDE Session
Jul 8, 2011My ISP offers the service of native IPv6. So my ADSL router provides me with a local and global IPv6 address. However after a reboot it takes minutes to finally see the global address when using "ifconfog eth0". During that time I can't do a ping6 to an external server, which seems logical. So I waited several minutes, but no global address. After that I started a KDE session, went back to the console(<Ctrl>+<Alt>+F1) and now the global address was there. Is this normal behavior or should I file bug report?
View 6 Replies View RelatedUbuntu Networking :: /etc/network/interfaces Not Booting On Startup?
Sep 23, 2010When I boot into Ubuntu with the Xfce desktop then proceed to terminal to check my IP it is always some random IP as provided via DHCP by the router. If I then go to the cmdline and type sudo /etc/init.d/networking restart then the wifi correctly connects to the router to the one static network address that I have specifically provided for it - as stated in my interfaces file. Why is this not happening on startup?
View 2 Replies View RelatedUbuntu Networking :: Startup Networking Automatically Using /etc/network/interfaces
Jul 2, 2010I'm on an embedded system that doesn't have Gnome, and I'm trying to startup networking automatically using /etc/network/interfaces. Here's what I have.
[Code]....
eth0 comes up just fine. wlan0 comes up, but it's unable to acquire a DHCP address. I added the following lines to /etc/rc.local, and wlan0 comes up all the way, but I'm not too crazy about this hack.
[Code]....
Ubuntu :: Wake Up From Hibernate Takes Too Long?
Jan 16, 2010I am having a problem with a slow wake up from the hibernate in karmic with gnome.My desktop has 2GB of ram and 4GB of swap.m doing standard hibernate from the menu.Hibernation takes 44s, which I can live with for now. But wake up measured from grub boot menu to unlock dialog takes 2m 47s. I think it's reasonable to expect it to take less than a minute.
View 1 Replies View RelatedUbuntu :: Gnome Menu Bar Takes Long To Appear?
Jun 12, 2010I am running Ubuntu 10.04 Lucid, and it works perfectly.However, since last week (probably after some update), the gnome menu bar takes much longer to appear when I login. After it appears, it works just fine.To clarify, I turn on the system, login, the desktop background image and icons appear, and only after about 30 seconds the upper and lower gnome menu bars appear (a week ago all of it loaded almost instantly).
View 1 Replies View RelatedUbuntu :: 10.04 Takes A Long Time To Boot Up?
Jul 26, 2010After I installed a new hard drive, when I booted up into Ubuntu, it would give me this error: "failed command: WRITE DMA". So I tried the workarounds and I guess it just covered the log with the Boot Splash, now it's taking a long time just to boot up.
View 9 Replies View RelatedUbuntu :: Computer Takes Way Too Long To Boot?
Nov 15, 2010I recently changed my computer so it would auto boot into Ubuntu, but if I hold down the shift key, I can bring up the GRUB menu so I can choose Windows in the rare times I use it[URL]Anyway, I noticed that when I did that, it actually took longer to boot. I timed it today and it took 45 seconds from the time I pressed the power button to get to the login screen! My friend uses Linux a lot and says even with Ubuntu (which he thinks is "too slow") it shouldn't take that long.
View 1 Replies View RelatedUbuntu :: Shutdown Takes Unusually Long?
May 16, 2011So as the title says shutdown time takes unusually long. Upwards of 4-6 minutes. I'm used to my linux systems taking about 10 seconds to shutdown, 20 tops. In fact this problem seemed to stem from the natty release because I didn't have this issue with the betas or 10.10....
It seems the longer I use my laptop the longer it takes to shutdown. When I do a quick task like a file backup the shutdown takes 10seconds or so, but if I open up a browser and start surfing for a few hours it takes more like 5 minutes.
Programming :: Backupscript Takes Too Long?
Apr 19, 2011Got some speed problems with my backup script, need to save 250GB data (28 network-shares (20 user homefolders included) - each one gets an own zip; approx. 100'000 files)Backupdata are stored on our nas that is embedded with mount -t cifs -o user,pw //networkadress /yet/another/backup/folderPacking process takes about 60! hours (on an intel xeon 3.0 GHz RHEL4 system) - connected via 100mbit networkzip -r /yet/another/backup/folder/asdf.zip /home/asdf/Is there a way to speed up this whole process? Saving via tar.gz instead of ziping?
View 2 Replies View RelatedUbuntu :: 10.04 Lucid Lynx Takes Too Long To Boot
May 22, 2010I installed bootchart and uploaded an image of my latest boot on imageshack: [URL] but I do not know really how to interpret it. Bare in mind that I did not use to have this problem while running Karmic...back then the OS started twice as faster as it does now after the update (now it takes at least 75 seconds to boot) .
View 9 Replies View RelatedUbuntu Installation :: 10.04 Takes A Long Time To Boot Up?
Jul 25, 2010I have an Acer Aspire 1810TZ laptop with Windows 7 on it. I decided to dual boot w/ Ubuntu 10.04 32-bit Lucid Lynx. I was initially getting this issue
Code:
gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
[code]....
Ubuntu :: Document Viewer Takes Too Long To Print?
Aug 23, 2010I have just got some new sheet music; and I was wondering why it takes so long to print from Document viewer. I have a lexmark optra e312 which is connected to a windows network, and other programs seem to work just fine, but this one prints slowly whenever I:connect it to my computer directlyreinstall the printerreinstall ubuntu, even to other variantsMaybe someone could suggest another document viewer? I need to view .pdf, .ps, and .djvu as well as a few others if possible
View 4 Replies View RelatedUbuntu :: Maverick Takes Too Long To Boot (1.5 Minutes)?
Jan 25, 2011It's been a while since this problem started. I have an Acer Aspire 4720z laptop with Ubuntu 10.10 installed. My laptop takes a whole damn 1.5 minutes to boot up and login (measured according to bootchart; I have auto-login enabled) (The majority of this 1.5 minutes is taken up after boot up, so it might indicate a problem with Xorg.)I don't know whether this is relevant, but when I boot up, a message gets displayed: "ata4.01: failed to resume link (SControl 0)". Also, this problem started right around the time I upgraded from Lucid to Maverick, so it could be some problem with my upgrade.find the source of this issue.ATTACHED: bootchart image from last login.boot.log:
Code:
fsck from util-linux-ng 2.17.2
udevd[370]: can not read '/etc/udev/rules.d/z80_user.rules'
[code]....
Ubuntu :: Alien Arena Takes Really Long To Load
Apr 3, 2011I did used the Alien-Arena yesterday as usual and did work fine from start to finish! When I launch it today, it is taking about 4 minutes to load the main screen. I did a reinstall and with no success! Completely removed it with synaptic and reinstall... but the problem still remains! Something went wrong and I can't figure out what
View 1 Replies View RelatedUbuntu :: Takes A Long Time To Open A Browser ?
May 11, 2011After upgrading to a 64-bit Ubuntu 11.04, I have found that it takes a lot longer to open any browsers such as Firefox, Google Chrome or Opera. Does anyone know why? I thought 64 bit Ubuntu should be faster than the 32 bit version. Nevertheless, I see no difference besides the browser problem mentioned above.
View 9 Replies View RelatedUbuntu Networking :: Adding Interfaces To /etc/network/interfaces?
Apr 16, 2010If I try to add a new interface (eth1) to /etc/network/interfaces, I get
Code:
* Reconfiguring network interfaces... SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
How do I add 2 interfaces and get anyone of them to work, as available ?
Fedora Installation :: Formatting Takes Very Long ?
Nov 12, 2010I booted fedora from an live cd not i have a problem when i want to install fedora formatting is taking vey long its already busy for 1 hour and this is te second time im trying to install fedora does it need to take this long ? I've got an unexpected fault for the second time and pressed debug but nothing is happening keeps formatting.
View 3 Replies View RelatedGeneral :: Vim Takes Long Time To Start ?
Feb 23, 2010I'm having trouble with Vim in any terminal emulator I use. I have a link (vi) to vim. Occasionally it will take very long to load, whether I use 'vi' or 'vi file'. Before, if I could I would restart X, and then it would load instantly again, but I waited this time and it did load, after a minute or so. Is this a problem with X or vim?
View 9 Replies View RelatedUbuntu :: File Properties Takes A Long Time To Open
May 6, 2010I have a newly installed Kubuntu 10.04 running here, works fine except for one thing.
I have a kind of "fileserver" and it has a samba share that I have mounted in the home folder of my desktop computer ("/home/xxx/fileserver", the server is running an older version of Ubuntu, can't exactly remember what it is but the filesystem is ext2, if that's of any importance).
I have large files on the server, mostly video. When I use Dolphin (or Konqueror, doesn't make any difference) and right click one of these large files and choose Properties, it takes a LONG time to load the properties window. As if it copies the file to local hd before opening properties, or something.
The reason why I posted here and not in the networking section is, that I had the exact same setup with my previous installation which was Kubuntu 8.04, and also at least three different Ubuntu's before that. Never had this problem before, so I think my server and networking thingies are okay.
Ubuntu Installation :: 10.04LTS Splash Screen Takes Way Too Long?
Jun 3, 2010just upgraded from 9.10 to 10.04LTS and upon first reboot it gets stuck at the splash screen.. it just keeps loading over and over, nothing happens.I don't have the liveCD as I just did the download from the internet via Synaptic Softwarethis is what I tried:hit ESC when GRUB menu loads.. tried to hit "e" on the boot option and nothing happens.. I was told changing quite splash to nomodeset would fix it but it doesn't even say quiet splash, unless someone wants to walk me through it.I'm soo frustrated, I have tons of e-mails and documents that I need to save.is there a fix to get me back in just so I can copy my emails and docs and do a fresh install?
View 1 Replies View RelatedUbuntu :: Firefox Takes Long Time When There Is No Internet Almost 2min
Jun 21, 2010Firefox take so long more that 2 min when started and there is no internet is available (i.e. Ethernet cable is unplugged).
I think FF is looking for the connection. How can I make FF ignores this check.
I need this because sometime I am away from my networks and I need FF for local testing for web development.
I am using Ubuntu 10.4
Networking :: Configuring With Two HW Interfaces?
Oct 16, 2010I have two interfaces, gprs0 and gprs1, both connected to the Internet from the same HW device, but through two different access points I just read another blog entry with a guy who had two network cards, using one as a back up - I guess this is a little similar, but should be much easier I am guessing - I am just lost Using ifconfig (IP address given by the network) and route to setup the connection,
ifconfig gprs0 10.20.30.40 up
route add default dev gprs0
ping 66.102.7.99 works fine
afterwards
[code]....
There is data being transmitted and received to device again, I guess the kernel just doesn't know where the incoming data should go without the correct routing tables? Or what exactly is going on?The question I have is how do I configure the device to do the correct routing, using only the ifconfig and route commands? Maybe too trivial for you guys, but I am getting tired of goofing around not knowing what is up and down anymore
Software :: GRUB2 Takes A Long Time To Load
Jan 5, 2010I'm running Ubuntu 9.10 and Windows XP on my system. After installing Ubuntu, it boots normally about once, and then the next time I try to boot, I have to wait a few minutes with it saying "GRUB Loading." I have read other threads about this that say that it is clearly a GRUB2 problem, and something about Windows overwriting something with the MBR; although I haven't booted into windows once in the process of installing Ubuntu (multiple times) or afterward. GRUB version 1.97~beta4.
View 10 Replies View Related