Ubuntu / Apple :: Admin - User And Groups Not Working?
Jan 22, 2011
After finally getting Ubuntu 10.10 PPC up and working on my Mac Cube with low capability graphics, I noticed that when I try to run the "User and Groups" from the Administration menu, the program looks like it is starting but then never actually displays.. It shows up at the bottom of the running programs bar and then disappears. Well after having to completely re-install Ubuntu PPC 10.10 and installing all of the updates, User and group Administration still isn't working.. another app that would let me add my wife to my G4 Cube so she could use it?
View 9 Replies
ADVERTISEMENT
May 7, 2010
I recently ran into a situation where the ftp user account suddenly could not login. I used the User and Groups system tool to check the user account and reset the password. I then attempted to use ftp and login with the new password and still could not. I then went to check the permissions on the folder and found that the system partition was full, so using gpartd I was able to resize the system partition.
However this still did not fix the ftp login problem. When I opened the User and Groups tool again, all users,including my main account, except root are no longer displayed and all groups are not showing. If I try to add the original ftpuser account I get the message that the user already exists. And my main account works for login still. If I add a new user, it is not displayed in the list either.
If I do a cat /etc/passwd I see all the users listed including the new one I created and cat /etc/group displays all the groups and everything looks like the users are still associated with the correct groups. I can use passwd to change the account password without error and I can use adduser to add another user. Howerver no users are listed in the User and Groups tool and users still can not login to ftp. I can reinstall proftp if needed but I would like to be able to use the User and Groups tool to administer users again.
PS: Forgot that just before encountering the ftp login problem, Update Manager and some updates listed that I attempted to install but got an error and didn't have time to check why. Now I know that the partition was full.
View 1 Replies
View Related
Nov 8, 2010
I recently installed 10.10 on a Mac Powerbook G4. Everything seems to be working ok, except I cannot access the Users and Groups. If I try to launch it from the terminal I get the following error: "Glib-GIO-ERROR **: Settings schema 'org.gnome.system-tools.users' is not installed"
This is a clean install, with no changes made to the system. I then ran all the waiting updates and am still experiencing this problem.
View 8 Replies
View Related
Jan 6, 2010
Original HOWTO can be found at: [URL]... So the other day I was in IRC and someone had brought up a problem where they created a new Administrative user, but didnt have rights to use sudo. Looked into the problem a little bit to figure out what was wrong, and it turns out that when you create a new user through the user manager (in kubuntu, anyways. Havent tested in Gnome.) the user gets added to the adm group, however, a quick look at the sudoers file shows that its looking for users in the admin group to allow the use of sudo. So, to solve the problem we do the following: If youre on the new admin user (which Im assuming you are) use the following commands:
Code:
su [insert username of old account without brackets]
sudo usermod -G admin [username of new admin account without brackets]
exit
Then simply logout, and then log back in (not always necessary, but the easiest way to flush the permissions.)
Code:
su [insert username of old account without brackets]
Means were going to Switch User to the old admin account
Code:
sudo usermod -G admin [username of new admin account without brackets]
This simply adds the admin group to the secondary group list for the new user
Code:
exit
Pretty self explanatory
View 4 Replies
View Related
Sep 28, 2010
What is the difference between creating a "regular" user and creating a "system" user on Linux?
For example:
Code:
adduser john
Code:
adduser --system john
Similarly it seems there are normal groups and system groups. Doing an internet search and reading man pages does not give much information on the whole concept of system and regular user/group.
View 1 Replies
View Related
Feb 6, 2010
I'm installing a new laptop for a friend of mine and he wants 3 user accounts, similair to how he runs his windows setup.
1, an admin account, we have called this account peacemaker.
2. his account
3. an account for his girlfriend.
The problem we have is that if we want to do anything from the terminal that requires elevated priviledges, sudo does not accept his password or that of peacemakers. we have done sudo -i -u peacemaker but it still doesn't accept either password, stating his account is not in the sudoers list.
I'm not a massive expert here, but research brought me to this page:[URL]... But that then just means his account has admin rights, which is what we were trying to avoid. We wanted a setup similair to windows where if you want to run someting with elevated privledges if pops up asking for the admin password. This works in the gui, but not in the terminal.
So in short, my question is, is there anyway of having the terminal accept peacemakers user rights from the his normal user account? If I add the account to the sudoers list like it suggests, does this again just give his account the prilvedges rather than saying supply me with the password for peacemaker.
this is probably not really needed and he can just have his account as the main user, but coming from a windows background, he would prefer the 3 user accounts model (2 normal users, 1 admin)
View 4 Replies
View Related
Dec 19, 2010
i am considered a power user in windows but in ubuntu ima total noob. in the users settings, manage groups, i see like 100 groups. and thats just annoys me, all i want is to be the admin and everything to work its not rocket science is that so hard for linux? I DO NOT WANT TO BELONG TO A FREAKING GROUP I JUST WANT 1 SIMPLE ADMIN ACCOUNT. someone please explain everything related to this subject. i mean i see stupid groups like 'audio' and 'couchdb'. WTFi dont want these useless groups to exist on my system
View 9 Replies
View Related
Jan 15, 2009
just getting startedin linux <fedora9> and haveseveral questions. first what bookwould be best to start the learning process? have looked at fedora 9 and enterprise and the newest fedora 10 with enterprise and these seem to be aimed at networking setups which I do not have.also in adding users and groups which I have done I think successfully however when I use the newgrp command and try to access a file I have saved under a group with two members the file does not show in the ls command.
users are jevans in group programmers cevans in group programmers in creating the file I didthe newgrp programmers command and created the filein the cevans spotand changed to jevans and negrp programmers and the filedoes not show.so what do I do here, or is my understaning of this incorrect?
View 14 Replies
View Related
Dec 28, 2009
Code:
gpasswd -a username -g audio,...
What are the other options?
View 6 Replies
View Related
Jun 12, 2011
So I just recently installed fresh 13.37 over my 13.1 install. Went multilib, and added myself to the usergroups I thought I might need. But truth is, I don't know what half of these are and I just picked the ones that sounded right. I'm the only user on this computer, although I might possibly maybe add another someone if I have to for some reason.
For my user account, I added myself to:
Code:
bin
disk
mem
kmem
wheel
floppy
mail
news
uucp
man
dialout
audio
video
cdrom
games
mysql
sshd
gdm
shadow
ftp
messagebus
haldaemon
plugdev
power
netdev
scanner
users
console
kismet
vboxusers
Basically, I want my own account to be able to do everything I normally do without too much restriction (use the disc drive, mount hard drives, browse the web, read/send email via Thunderbird, download stuff, etc), but leaving the important stuff to root so that if someone else happens to use the computer under my account, they can't do any damage. Did I select the right groups for this? Should I add or remove any? And what groups should a user have if I just want them able to browse the web, download files, use their /home, run non-root apps, and nothing else?
View 8 Replies
View Related
Sep 2, 2010
how would i make an existing user on kubuntu 8.10 an administrator with root access?
View 3 Replies
View Related
Aug 4, 2011
I have Ubuntu 10.04.2 (Linux 2.6.32-33-server on x86_64) with OpenLDAP 2.4.21 and Webmin1.550. I converted my ldap database from another system with the older style schema (OpenLDAP 2.3.3 with slightly older Webmin version 1.480) and no longer use slapd.conf, but the newer slapd.d format.
It all works fine except for one thing. When I add a new user, it lets me type in the additional LDAP fields:
But when I click the Create button, all the fields get jumbled together in the Title/Position box with a diamond question mark delimiting the fields:
Modifying existing users (which have the Additional fields displaying correctly) also has the same result - it moves the fields all into the one Title/Position box with the diamond shapes with question marks inside between each entry. Is it a problem with my schema files? I tried reverting to the older shema files and slapd.conf and it still did the same thing on the new system. I am really at a loss.
Here is also the output of ldapsearch for that user (host and samba ids are sanitized):
Previously added users that show the fields properly have "description:" and then the field listed for each Additional LDAP field. Also shouldn't the "title" be visible in plain human readable text here? - it looks like it encrypted it somehow - similar to a password hash. The older system works fine and the fields are all readable and in their proper locations. But the new system just doesn't work right.
View 1 Replies
View Related
Dec 5, 2010
I've just installed Fedora 14 x64 and had a few problems. I have a GT9800 video card and after installation x wouldn't start untill I added xdriver-vesa nomodeset to the kernel line. Anyway I've just got it to the point where it will actually boot but wasn't asked to create a user - the live cd installation only asked for root user password. So I used useradd to create a user and I'm finally at the desktop. My question now before I go about installing the nvidia driver is can someone confirm which groups my user should belong to. I haven't used Fedora since FC3 so I can't remember.
View 2 Replies
View Related
Aug 7, 2009
I created a user and I want the particular user in multiple groups. How Should I and after creating the user,If I want to delete that user from a particular group.
View 1 Replies
View Related
Dec 7, 2010
I am building a livecd, the live user created at boot time is a member of the audio group set in /etc/group. This way works for the livecd but when installed a user must manually add himself to the audio group. How can I set new users to automatically become a member of the audio group? In /etc/default/useradd I can set only one group.
View 4 Replies
View Related
Jun 16, 2011
I've created a set of users using the newusers command. Unfortunatelly ive messed up and added all users to the 1000 group as primary group instead of giving the group argument as null what would add them to a new group. To make things clear:
The entries should be
user:password:::User Name:/home/user:/bin/bash
but I did
user:password::1000:User Name:/home/user:/bin/bash
I need to create the missing groups. A simple fix could be do a for loop creating a group with the name of each user in my file and then adding the users to it. Are there any dangers of doing it? What impact could this change have? Are there any safer ways?
A combination of the following commands:
Quote:
Add users to a group with the gpasswd command:
# gpasswd -a [user] [group]
To delete existing groups:
# groupdel [group]
To remove users from a group:
# gpasswd -d [user] [group]
If the user is currently logged in, he/she must log out and in again for the change to have effect.
Quote:
for i in (names)
do groupadd $i
gpasswd -a $i $i
Assuming I've created all users in group 1000 I could remove them from it with
Quote:
# gpasswd -d [user] [group]
View 2 Replies
View Related
Jan 29, 2010
What's the single command to add these groups to user account?
Code:
users floppy audio video cdrom plugdev power netdev
Suppose user account "myuser" is already created with only "users" group.
View 13 Replies
View Related
Mar 24, 2010
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like
[code]...
View 9 Replies
View Related
Jun 15, 2010
I'm trying to edit a "xl2tpd.conf" file but it always says I have no write permission tried to add my account to admin group but it says something about not able to lock on password try later.
View 3 Replies
View Related
Aug 9, 2011
I had two accounts. One was an admin and I set the other as an admin as well, but left it without a password since I wanted the new user to enter it themselves. I went into the new admin account and deleted the old, passworded one.
However, this new account doesn't have a password that I explicitly defined on it. How do I change that? The account is the only one and still 'disabled'.
View 8 Replies
View Related
Sep 14, 2010
A regular (non admin) user can create a Truecrypt 7.0a file, but it can't be mounted. The admin password is refused. If you try the regular user password, the error is that you are not on the sudo list.
View 1 Replies
View Related
May 25, 2010
i wonder, why nobody has written about it ...
How can i grant permission for files to specific user or specific group ??
Updated:
We have 3 groups: "g12" ("u1" and "u2), "g34" and "g56".
"g12" should only read the file.
"g34" should write and read it.
"g56" should have all permissions (rwx).
And others should not access the file at all.
View 3 Replies
View Related
Jan 17, 2010
Slackware 13 64 bit Hp Photosmart c4280 USB (All-in-one)
- Printer successfully configured using CUPS
- Scanner only works when I am Root.
- When trying to access scanner as user it says there is no scanner attached.
What should be the groups for this user in order to access the scanner? Actually, they are: haldaemon, disk, audio, video, cdrom, plugdev, power, scanner, lp. Below are the outputs for sane-find-scanner (as both root and user), although, since the scanner works well under root, I am almost sure it is a problem with setting permissions and groups.
Quote:
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
[code]....
View 2 Replies
View Related
Apr 9, 2010
i've got a regular user i want to turn into admin group so he can have same privileges as a root. should i just change the GID in /etc/passwd and /etc/group or should i use usermod/groupmod?
View 3 Replies
View Related
Mar 10, 2011
Twice today, and several times recently, I have had a sudo command rejected with the dreaded message "<user> is not in the sudoers file..." It's because my user -- which is the main user, the one you create on Ubuntu installation -- has "fallen out of" the admin group. I can fix it because there are other users defined which are still in the admin group and I can su to one of them and add myself back.But why is it happening? I'm doing software development, and use sudo mainly to do benign things like copying new versions of Perl programs into the application library: I'm not going anywhere near the security subsystem, for instance. I'm worried that one day whatever-it-is will choose to drop all the users out of admin and then I'll have to resort to live CD hacking to fix it.
View 3 Replies
View Related
Jul 16, 2009
I'm having a bit of a problem after joining Ubuntu 9.04 to my company's Windows Domain. I can log in and use sudo just fine but I don't have access to certain things in my menu (i.e. "Add/Remove Software") and I can't open the User Manager. I manually edited the /etc/group file as root and added my username (username@domain) to the appropriate groups but still no luck.
View 2 Replies
View Related
Feb 7, 2016
I made the mistake of using the command 'adduser' on an already existing user. I was incrementing a name and mis-typed. Now the account refuses to recognize the users password. The user can get in.
I tried resetting the password as administrator (passwd 'user'), but when the user tries, the new password isn't recognized.
I tried expiring the account password (passwd -e user). The user gets prompted for a new password, but the new password still doesn't get recognized.
View 14 Replies
View Related
Dec 4, 2009
how to make a admnistrator account and change normal user role admin role i want to modify file system
View 3 Replies
View Related
Jan 7, 2010
I just tried to change a user account by changing its name, password, and home directory. But first I had created a new account with the new name, pass, home directory. I tried to log into the new account but got a dead account. Nothing came up, and it didn't allow anything, complaining about "can't create Nautilus," and other such error messages.
Tried to go into the Constantine login screen and put in "root" and the original password. "Invalid Use..." Tried "root" with the new pass. "Invalid..." So what can I do at this point to get in and create a nice, clean, new account (with admin privs) for the new user?!
View 1 Replies
View Related
May 6, 2011
i have centos5.3 i want to create user with non admin privileges he is unable to see contents of server only he will able to login nothing else
View 12 Replies
View Related
