Ubuntu :: 10.04 On VirtualBox Crashed?

Sep 21, 2010

I installed Ubuntu 10.04 on VirtualBox, installed on top of a Mac so I can learn programming (studying for certification for my job).

Just now, it went black, so I sent the power off signal. However, when I restarted, I keep getting the following error as shown in 01-error.png. When I enter help, it displays following commands shown in 02-error.png

Tried researching the problem myself, and found the following link

[URL]

However, I am not sure if it applies in my case because this is on a virtual machine. And what am I supposed to mount?

I need to recover data I saved on this VM, re-installation is the very last resort.

View 9 Replies


ADVERTISEMENT

Debian :: VirtualBox Error - 'install Virtualbox-ose-modules Package For Kernel And Execute 'modprobe Vboxdrv'

Apr 27, 2010

my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).


[code]...

I get this when trying to launch a VB after making one with wizzard.

View 6 Replies View Related

OpenSUSE :: Data Corruption In VirtualBox 4.0.4 From Virtualbox.org?

Mar 7, 2011

Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.

View 1 Replies View Related

OpenSUSE Hardware :: Unable To Start VirtualBox Kernel Modules - Error Stopping VirtualBox Kernel Modules

Mar 23, 2011

I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:

/etc/init.d/vboxdrv setup. I get this error:

[code]...

When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?

View 5 Replies View Related

Ubuntu :: Firefox Crashed Very Often In 10.04

Jul 29, 2010

In My system I have installed 10.04 Ubuntu 64bit version recently. From the beginning itself, my web browser firefox crashed and disappeared very often in between my surfing.

View 5 Replies View Related

Ubuntu :: SOS Crashed During Upgrade

Sep 1, 2010

My laptop crashed in the middle of upgrading from Hardy Heron to 10.04. Now I can't boot at all. It'll load grub and let me pick an older kernal which gives me a reasonably familiar shell or I can let it go to the latest and it gives me some strange shell with very limited commands.

View 3 Replies View Related

Ubuntu :: HDD Crashed After Installing 10.04?

Oct 8, 2010

I have 2 hard disks installed in my system, 160 GB and 500 GB. I have using windows 7 installed on the 160 GB disk for past 2 years now and never faced any problem with my HDDs. Now this 500 GB is some problematic one. Remember the 500 gb disks from seagate which was a huge failure, i have that model. I bought it with 3 more of my friends. All other's HDD's crashed again and again except mine. I did some scanning and all with all sort of HDD softwares but all is well, except one soft called HDD health that showed my 500 gb has 48% health. It remain like that for an year, so i stopped worrying about that. I have stuffed my disk with data and never faced any problem up untill now. Now yesterday i decided to install Ultimate edition 2.7 64-bit. I downloaded it and burned the dvd at 4x speed and how i wanted to install it is like the way that it should go into the 500 gb one without having to do anything with 160 gb one having windows 7. I have done this earlier and it caused absolutely no problem. I just change the boot sequence to whatever disk i wanted to log into windows or linux(remember i did that with the same disks). Now i emptied a partition in 500 gb one, deleted it with the help of partition manager inbuild in windows 7, unplugged the 160 gb and booted thru live cd of UEU 2.7 and started the installation. When i got on the partition selection screen, what it showed me was just a 500 gb of "unallocated space", which i s actually healthy 6 partitions containing data which i have been using for years. No traces of the 30 space i unallocated in windows for linux. Now first question, "Why the hell did it not recognized my HDD when its perfectly operational in windows and i have installed UEU 2.5 on it once". It should have shown me the partitions. Does that means that my HDD was having some problem already ?? Now i booted back in windows, reallocated my 30 gb space, emptied some space from a 160 gb HDD's partition and got back into linux, with both HDD's plugged in this time. Now i started the installation. Again it didnt recognized the 500 gb chunk but did recognized the partitions in 160 gb and also recognized windows 7 installation. I formatted the partition with ext 4, didnt provide any partition for swap as i have 4gb ram and changed the boot loader to GRUB. Installation was successful. I can see all the drives from 160 GB one but only one partition from 500 GB one, no traces of other partitions, not even in Gparted. And yeah, the disk was mounted. Now everything was looking fine, i switched back and forth from windows to linux a couple of times, switched off the computer for some time, switched back on and watched a movie and finally shut down properly last night.

Now this morning my brother switched on the PC and it just wonts start. It restarts again and again just after the BIOS screen. I checked everything but couldnt find the problem. So finally i de attached the hardware one by one and found its the 500 GB that was causing the problem. I plugged it out and booted in again. To my surprise, the windows 7 booted in from 160 GB HDD with no traces of linux what so ever. Its was in the same HDD, i installed the common boot loader and have seen it my self when i switch on the pc, showing all linux options first and then windows 7 as other OS. It has nothing to do with 500 GB one, no dynamic partition, no system files or any thing. I suppose that windows 7 cant take back te boot loader without the help of installation disk and i have not used any. There was not even any kind of system recovery installed. Then how the hell windows 7 came back and linux just disappeared. The partition manager shows that the newly created partition for linux as "healthy and primary" partition.

say it once that all this mess was only due to i screw up the installation and my 500 GB is not dead. I will die without my data.

View 6 Replies View Related

Ubuntu :: OS Crashed On The Laptop?

Oct 12, 2010

I am using Ubuntu 9.10 on a Sony viao laptop. (not right now 'cause it won't start up). I've been tring to turn it on all evening with no luck. I turn the power on. The first bios screen show the read out and then the Ubuntu icon shows on black screen and then the screen goes black. At that last stage I would have expected to see the brown Ubuntu screen and then the log in screen but it doesn't show up.

Is my hard drive damaged from being shaken around? I carry my laptop in a backpack designed for that and place in my car trunk (carefuly, I don't throw it around like a ball) If the hard drive is damaged, the way do I see the first black Ubuntu srceen on start up? Does Ubuntu burn that on to the bois? I tried starting up from an Ubuntu instalation CD and a Puppy CD and got the excat same results as listed above.

View 3 Replies View Related

Ubuntu :: Minecraft Crashed ?

Jan 4, 2011

Have found nothing useful Minecraft has crashed!

Minecraft has stopped running because it encountered a problem.

View 6 Replies View Related

Ubuntu :: Geany Is Being Crashed

Mar 29, 2011

I am using ubuntu 10.04 . when i try to compile some C++/C code using geany it suddenly crashes sometimes . I have run geany from terminal and when it crashed it has left.

View 2 Replies View Related

Ubuntu :: OS Crashed - Unable To Boot Up

Jan 16, 2010

I have just replaced my decaying XP OS with Ubuntu just yesterday evening. Everything has been fine until today at around noontime, where the OS just crashed. I have not been able to boot up the OS ever since, neither from the HD or the LiveDisc which I have installed from. I had updatemanager, that IM program (I'm new to the system, I don't know what its called and Firefox open at the time. I have 32 bit ubuntu installed on a 32 bit computer, unpartitioned HD

View 2 Replies View Related

Ubuntu Installation :: Old Medion Pc With Crashed HD

Feb 11, 2010

I have not used ubuntu yet ; but would like to install the latest 9.10 version on an old Medion pc => Windows (XP) crashed and I bought a new Samsung HD to replace the old one.I found that most of the install "How To's" speak of using Windows to start a cd to install UBUNTU.But what can i do to install this latest version on a "free" HD?Nothing installed.

View 5 Replies View Related

Ubuntu Installation :: Crashed While Upgrading From 9.04 To 9.10?

Feb 26, 2010

While upgrading from 9.04 to 9.10 using Alternate CD, the OS crashed. I had updated the 9.04 with latest updates and then started the upgradation to 9.10 using a Alternate CD. But after some time, the computer resarted and the screen displayed six line of 9.04 startup line. I waited for ten minutes but nothing happned.

What can be the reason and what should be done in that situation.

View 5 Replies View Related

Ubuntu :: Crashed While Downloading Updates?

Apr 14, 2010

I Installed Ubuntu 9.10 on April 12th On April 14th I got a screen message advising me to download and install 257 update programs.The download got up to at least program 241. That�s the last one I remember seeing.Then the screen brightened for about one second and I got a message saying that Ubuntu had to be restarted to finish downloading.I restarted and this is the screen I got.

View 9 Replies View Related

Ubuntu Installation :: PC Crashed During Upgrade To 10.04

May 5, 2010

I was upgrading to 10.04 through the update manager and my pc froze during the install, and I mean dead stop. It's happened a few times since I've come home from college for the summer, but I thought it was just the game I was playing or something so I wasn't concerned.

Now when I try to boot it gives me errors mounting /media/1 and /media/2 and various other others regarding NTFS (yet linux doesnt use NTFS so I'm confused...). When I hit any button that's not a letter (Esc, Delete, Backspace, etc.) it flashes over to a screen that says 10.04 with 4 dots underneath. Similar to what the loading screen should be, yet obviously not the loading screen.

Is there anyway I can install/upgrade this system through a LiveCD or something similar? I can't boot to Linux at all now, but I can boot to the Windows partition on the same hdd.

View 5 Replies View Related

Ubuntu Servers :: LTS Upgrade Via SSH - Crashed ?

May 5, 2010

I have looked around a bit but I can't even get my head around what to do next.

I attempted to upgrade my headless Ubuntu server from 8.4 LTS to 10.4 LTS last night. I used screen so that I could reconnect because the update said that although SSH may crash, I should be able to get back on via port 9004. When I tried to get back on this morning I could not SSH in via port 22 or 9004, so I did the only thing that I felt that I had left--I rebooted. I have since had to dig out an old monitor and keyboard and put a head on it to try and get this problem resolved.

When I boot the computer, GRUB gives me the option of kernel 2.6.32-21-generic-pae, but when I pick that I get the following error and the Caps and Scroll lights on the keyboard just blink.

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)I next have the option of kernel 2.6.32-21-generic-pae (recovery mode), but when I choose that option I get a screen full of time dated lines that do not make any sens to me and that same previous error message somewhere in the middle of it all.

If I try to boot to any of the old kernels, then I get a screen full of error messages and get dropped to an ash shell, BusyBox v1.13.3

Obviously the computer was in the middle of asking me something very important when I rebooted, but without being able to log in, I was never going to find out what that was. I guess I assumed that it wasn't a big deal because all of this was probably sorted out already as a possible chain of events on a headless server upgrade.

The bottom line is that my server no longer works and I do not have a clue as to how to get it up and going. If you have ever experienced this situation and have gotten through it or you actually do know something about this situation, please help me out.

My server is no longer headless, but I am now definitely clueless.

View 9 Replies View Related

Ubuntu :: 10.04 Crashed 10 Times Today

Jun 5, 2010

I installed 10.04 today and so far it has crashed a lot of times.It's not so much of a crash but, the screen goes blank, the top half of the screen keeps flashing with white and black lines hanging vertically.I can't do anything when this happens, I just have to press the tower, and it brings me down to the shutdown screen.

View 9 Replies View Related

Ubuntu :: Get Data Off Crashed Installation?

Jul 21, 2010

A few months ago I did a clean install of the unbuntu desktop which I used to run an internal website. The OS was installed on one hard disk and two other hard disks I setup as a mirrored raid. Now when I start the computer I get a GNU GRUB commandline interface and I can't seem to get my installation up and running again. I've tried some of the suggestions for GRUB issues however I can't even get ls to work (gives me an error).

I am at the point where I don't really care about the OS installation but would desperately like to get the data off the raided disks and also a few files off the boot disk. I can't seem to work out how to do this using a liveCD, if I open the disk utility, select the raid and click "Start RAID array" I get a "Not enough components available to start the raid" error.

For the boot disk the major partition is a Linux LVM partition (and I assume the data I need is on that partition) however I cannot work out how to mount it. I really hope you guys can help me as the information is rather important.

View 2 Replies View Related

Ubuntu :: Limewire Crashed During Downloading

Sep 9, 2010

I'm using Ubuntu Netbook Remix 10.04 with HP Mini 110-1006TU.

I need your opinion on my current problem with Limewire. It just crashed during my downloading. The following are the error code:-

terminate called after throwing an instance of 'std::runtime_error'
./runLime.sh: line 124: 10735 Aborted ${JAVA_PROGRAM_DIR}java -Xms64m -Xmx256m -ea:com.limegroup... -earg.limewire... -Djava.net.preferIPV6Addresses=false -Djava.net.preferIPv4Stack=true -Dorg.apache.commons.logging.Log=org.apache.commons .logging.impl.NoOpLog -Djava.library.path=. -Djna.library.path=. $EXECUTABLE -jar LimeWire.jar $ARGUMENTS

[Code]....

View 7 Replies View Related

Ubuntu :: Update Manager Has Crashed?

Sep 30, 2010

i tried to load update manager, but a red circle with a line through it appeared next to my wireless signal bit, with the following code'E:Encountered a section with no Package:header, Eroblem with MergeList /var/lib/apt/lists/ppa.launchpad.net_teamxbmc_ppa_ubuntu_dists_maverick_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' then a grey shap appears next to it, saying report it to ubuntu, but when i press ok, it says it cant find the error to report. i upgraded to ubuntu 10.10 the other day just for the record

View 9 Replies View Related

Ubuntu Installation :: 10.10 Crashed While Installing

Nov 11, 2010

10.10 crashed while installing. Error writing boot loader. I used to have 8.4 on another PC and decided to install 10.10 on this one but the install failed. The error message said a log was at /var/log/syslog and /var /log/partman: but if it didn't install, how/where can I access this log or get 10.10 to install?

View 2 Replies View Related

Ubuntu :: 10.04 Crashed - Terminated With Status 4

Jan 13, 2011

My desktop using Ubuntu 10.4 (I recently ungraded from 9.04) crashed. That is Ubuntu is not loading. At first I get a Ubuntu icon and count % of cheeking system and before it reaches 50% a linux screen comes up with error messages:
Last six lines:
Code:
mountall: fsck / (9290) terminated with status 4
mountall: Filesystem has errors: /
init: mountall main process (9289) terminated with status 3
Mount of filesystem failed.
Maintenance shell will now be started.
CONTROL-D will termainae this shell and re-try.
roo@computername-desktop:"# _
How to revive Ubuntu?

View 2 Replies View Related

Ubuntu :: 10.4 Crashed - Will Not Boot During An Update

Jan 28, 2011

It happened to me again, I guess I need to ignore those updates but somehow I forget each time! This time it froze in middle of update no mouse no kybd no cap/num locks light nothing so I hard booted after an hour of wait, now I cannot boot at all. I go thru Grub menu then it says press S to skip and M to manually load. In most cases nothing works but I got to the prompt and put the root password but I dont have an IP address and cannot get 1? I did fsck -p but no errors. It says the OS is not on / or has been gone?

View 2 Replies View Related

Ubuntu :: Delete The Crashed Only With Out Afficeting New 10.10?

Mar 22, 2011

I am using ubuntu 10.10 before that i am using ubuntu 9.10, that 9.10 was crashed i forget to delete the partition while installing the ubuntu 10.10. This is because of my too slow. it show swap partition. how to delete the crashed ubuntu only with out afficeting my new ubuntu 10.10

View 5 Replies View Related

Ubuntu Installation :: 11.04 - Crashed - Can't See Desktop Or Anything

Apr 28, 2011

I have installed ubuntu 10.10 and upgraded it fully, now when new ubuntu 11.04 came i pressed the upgrade button in the update manager. When download was complete then installation started... At the end of installation ubuntu crashed. Now i don't have it fully installed... Now i can't see desktop or anything.. I just have a Terminal... Is there any way how could i install ubuntu 11.04 missing part on with Terminal i have there.

View 9 Replies View Related

Ubuntu Installation :: 10.10 - 11.04 Crashed On Upgrade ?

Apr 29, 2011

I was minutes away from finishing my upgrade and the screen went black and the mouse stopped moving. I left it for about 10 minutes to see if it would recover but nothing happened. I had to restart and now I've got nothing, not even a terminal prompt. If I start normally, I get a blinking white cursor (I cannot type) that never goes away and if I try recovery mode It hangs.

View 1 Replies View Related

Ubuntu Installation :: 10.10 To 11.04 Upgrade Crashed

May 6, 2011

I have run 10.04 for some time with no issues. I was presented with the system option to upgrade to 11.04. This I did but the upgrade crashed out halfway through the install process, with a 'too many errors to continue upgrade, system maybe unstable'.

On re-boot I am now presented with;

And the system waits for the selection.

So my question is - how to recover this ?

I can get to a shell (#) and see files on the drive (using ls) so I know the drive hasn't died.

View 3 Replies View Related

Ubuntu :: 11.04 - Crashed Upgrading The Packages

Jun 11, 2011

when my computer was upgrading the packages it crashed with like 30 seconds left. On the reboot, the login screen was blue and it didn't have any accounts listed, I had to click other and sign in. when I hit log in, it freezes at that screen, the desktop environment doesnt launch. I have to click alt + ctrl + del in order to log out.

I've tried going into system recovery, cleaning, repairing packages, and changing graphics dosnt work. Any ideas what I can do, I've tried all kinds of apt-get commands from the root terminal in recovery and dkpg commands too. Additional info: My computer has been freezing recently and I don't know what was causing it.

View 9 Replies View Related

Ubuntu :: Pc Crashed And Can't Get The Broadband To Work

Nov 6, 2010

I am using Ubuntu 10.04 When I first installed it My Tmobile Broadband was listed and ready to install I got it going and every thing was fine, Last night my pc crashed and now I cant get the broadband to work. I am going to keep trying to se if I can get it sorted before I ask for help but just knowing that there are fellow Linux users out there that are prepared to help out us newbies makes the shift from Windoze a lot less daunting

View 1 Replies View Related

Ubuntu Installation :: Installer Crashed With No Log File?

Jan 9, 2010

i have new HP notebook with preinstalled windows and i'd like to have ubuntu too. But it's rather difficult. Long story:

First I wanted dual boot, Ubuntu on separate partition, but then I discovered that I have four primary partitions for windows. SYSTEM (I think nessesary for windows boot) c: (where windows is installed) RECOVERY (for restoring factory settings) HP_TOOLS (needed for right function of HP BIOS)

ok, what now? Windows partition tool let me create dynamic partition (not extended) but ubuntu partition tool can see only four partitions.

Then the wubi idea came. If I can't have dual boot wubi can be solution. But it failed too. Behavior is similar to

[URL]

that is installer say "extracting kernel" and few seconds later just close. Sadly I can't find log file (searching filesystem for word wubi and searching directory c:/users/hater/appdata/local/temp) to discover what's the problem.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved