Ubuntu :: 10.04 LTS Crashes After Enabling Visual Effects?
Jan 2, 2011
Ubuntu works fine until I enable the visual effects to EXTRA. The computer then freezes, no mouse response, no keyboard response, have to hard restart.
when I click fullscreen in BBC iPlayer or ..... or whatever, the whole browser crashes instantly, no warning. And secondly my visual effects aren't working. When I go into Appearance and try and change from 'None' to 'Normal', it says 'Searching for available drivers' for about 20 seconds, and then says 'Desktop effects could not be enabled'.Both visual effects and fullscreen flash worked fine until about lunchtime today, and I honestly can't think of anything I did that would've changed setting or messed something up, so I really don't know.
im using the ubuntu distro and when i goto the visual effects tab and click on normal or extra, it says "desktop effects could not be enabled" also, i have Two hdd's, a 100GB that has windows 7 and ubuntu. and a 250GB that has Windows XP. GRUB didnt notice windows xp though, so its not a boot option.
I like the Visual Effects tab feature. I noticed that is gone from Ubuntu 11.04 and subsequently from distros based on it such as Linux Mint 11.The image attached is of Ubuntu 10.10. How would I get the None and Normal effect settings in Ubuntu 11.04Linux Mint 11?
I am having a bad slowdown issue when I enable Visual Effects with the Ati proprietary drivers that come with the installation. Everything runs very slow maximizing and minimizing take about 3-5 seconds per click and the effects get all choppy and don't look right like they did on my x1950 video card. I have tried downloading the current drivers from the ATI site but they don't seem to be initialising correctly after I perform the install.
I also know that the graphics card is not the culprit as it works perfectly fine on my Windows 7 64 bit install. There is no reason that my video card cannot handle the Visual Effects as it is a 1GB 4890 should have more than enough horsepower.
My machine is:
AMD Phenom II 965 Black Edition 8 GB G. Skill 1600 DDR3 Memory 1 TB Western Digital Caviar hard drive 1 GB 4890 Graphics Card ATI.
Just installed an ATI Radeon 9500 Pro graphics card (128 Meg). Linux just seemed to work fine with it - I didn't need to install any extra drivers or anything.
Before, when I was using onboard graphics, if I tried to choose "normal" or "extra" visual effects, it told me that I didn't have sufficient hardware. Now, since installing the card, it first said "installing drivers" then a message came up saying "do you want to keep these settings .... respond in 30 secs etc...
I chose yes to keep settings but when I close "Appearance preferences" it does not retain my settings and no visual effects are activated. If I open up Visual effects again the check box next to "none" is ticked.
I looked around and there seem to be drivers available direct from ATI but are these newer than those available already on Ubuntu 9.10? It is very confusing. It seems that I have might have to uninstall existing drivers before I can install new ones and I am reluctant to do that because - at the moment, apart from visual effects, everything works And would doing this even help anyway?
In fact has anyone succeeded in getting a Radeon 9000 series card to show visual effects in Ubuntu 9.10 or should I stop wasting time and assume that it is not up to the job? I can live without visual effects (although it would be nice)
My Acer laptop Travelmate 290 was fine till yesterday (ie) before full update.No Error.I have the recent Ubuntu. Later When I boot I can't find my cursor but I could randomly see pop up notification of Application----Places--- System could be read.When I open any folder its fixed to top of the screen and no button for minimise,max and close.When I dig thro all the forums and solved by reinstalling metacity and change the setting of Appearance-Visual Effects to Normal.When I set to Normal it scans for the driver and asking me to confirm the setting.Once confirmed all the above problems solved but it don't reatain it,it is jump back to none. I need to do this on every boot.Is any way to avoid this? Is anyway to clean all the compiz files and setting from the PC?I vaguely remember it may be because of uninstall of compiz.
there I turned on my Visual Effects to Extra or Normal and when I do that both the top and bottom taskbar goes away. The only way I can get them back is to turn visual effects off. Does anyone know how I can fix this issue?
I just got a new graphics card (Well, I guess you shouldn't call it a graphics card, it's more of a workstation card) Anyway, the card is the PNY Nvidia Quadro FX 580 and I installed the proper drivers for it (Nvidia 177) But, I'm encountering a problem with enabling the visual effects.Everything was running fine and I was able to use the effects until I enabled "Xinerama" two support both my monitors. Xinerama works fine, but the Visual Effects were reverted back to "None." When I click on "Extra" it searches for graphics drivers then tells me that I should switch to the graphics driver for my on-board graphics (ATI/AMD proprietary FGLRX graphics driver).
The ironic thing is that in the description for the Nvidia 177 driver it says "If you wish to enable desktop effects, this driver is required." It does not say that on the board graphics driver. Any suggestions? I want to start feeling like an Ubuntu user again rather than a windows user.
I'm running Ubuntu 10.10 64bit on my system. Upgraded the NVidia driver to the latest one on the NVidia website: 270.41.19 to see if it corrected a problem of when VEs were enable (even Normal not Extra), I got a white or blank screen. I could tell the system was still working because I got the text info bubbles when I moved the mouse; but when I open an app or a window, the screen was blank. After updating the driver; I can see a sharper and faster rendering image but when I enable the VEs I still get the blank screen.
Problem with the Visual Effects under Appearance is grayed out. The options were available until after removing Compiz. Is there a way to restore back to the original setting of ubuntu 10.10 prior to installing Compiz?
A few hours ago I upgraded my system, from Karmic to Lucid and I'm glad with it.But I have a problem, (two actually, I posted the second in other thread), Gnome is not remembering my Visual Effects configuration. I mean, I select the "extra" option and when reboot, it's back to "none".It will be a pain having to edit this every time my laptop starts.
i have ubuntu 10.04 installed on my pc but when i try to open visual effects on as normal or extra my pc stoped and must restart my pc manually same problem when enter on live cd same problem with 9.10 only but when try kubuntu 9.10 work normal
I have recently updated to Ubuntu 10.04 (version of Gnome Desktop environment: 2.30.0, version of Linux kernel: 2.6.32-21-generic).My problem is that when I try to enable "Visual Effects", I receive an error message: "Desktop effects cannot be enabled". When I attempt to enable Visual Effects, my system starts searching for external device drivers but finds none. I don't believe that the source of the problem should lie in my graphics card (I have a DELL Inspiron 1545 notebook with an Intel Graphics Media Accelerator 4500MHD graphics with up to 1750 MB of dynamically shared memory allocated by the system). With the earlier version of Ubuntu, the 9.10, I didn't have this problem.
I am trying to find out how to get the visual effects working on my PowerBook G4. I have 10.04 installed, and it's running an ATI Mobility Radeon 9600 M10. I can't access the xorg.config because it doesn't exist.
The hardware devices drivers list three different types of drivers onboard including what appears to be the latest one with accelerated graphics capability. When I try to improve the visual effects to 'extra' it keeps telling me there's an error. I've tried improving the effects with all three but still getting the error.
I recently install Ubuntu 10.04 on my computer and enabled the top effects option when choosing desktop background, screensavers etc. It worked fine for a couple of days then started to take about 3-5 seconds up maximize any program it ran - it minizes them instantly but takes ages the opposite way around.
My laptop has a core duo processor, 3gb of RAM, a ATI 3400 512mb graphics card, when I ran Vista on it, it could easily handle Vista built in effects and run Crysis well on low settings - I very much doubt the problem is that my computer isnt powerful enough. Is there anyway I can get Ubuntu's special effects to work properly again? Atm normal effects wont work either - I am having to use the No Effects option.
I am trying to do some video tutorials at [uRL] on Ubuntu Netbook Edition 10.10 this is the first edition to require desktop effects. When I install it in the VM it isn't enabled right away. when I go to enable it I ran in to the problem that I couldn't find appearance. When I opened appearance from the terminal I couldn't enable Visual effects because mutter is running. How do I drop to the base terminal and enable visual effects?
I have downloaded and installed all the required packages but still I am not able to enable the visual effects. Following are my Video Graphics Card details:-
[code]...
Whether any drivers need to be installed for this video card or ders any other thing to be done?
Problem with the Visual Effects under Appearance is greyed out. The options were available until after removing Compiz. Is there a way to restore back to the original setting of ubuntu 10.10 prior to installing Compiz?
I have just installed Ubuntu 11.04 on my laptop. Default installation, nothing special or fancy. It has a QuadroNVS 110M video chip, iirc. On Ubuntu 9, the visual effects were there to be enabled. When I enabled them it would ask if the proprietary drivers may be enabled. If I choose yes, they did and there were the visual effects that we all adore so much.
Now I'm trying Ubuntu 11.04, and the visual effects are nowhere to be found. The funny thing is, right after installation, the very first time the desktop was supposed to be loaded, I got a message telling my that my hardware is not capable of Unity. So alright, let's just only have the visual effects then. But how/where? It seems as if all references to effects and to unity have been wiped clean, because I can't find it *anywhere*.
Also, in the "additional drivers" I have activated the "[recommended]" nvidia accelerated driver, but after that (and rebooting) it is "activated but not currently in use". I have no idea what that means.
Note that I'm a Windows user really. I have next to no knowledge about linux. So great if I have to do some clicks or some packages to be installed, not so great to muddle in config files. I have also already scouted google, and I did find the obvious links, and no solution.
I have just installed the 11.04 of ubuntu clear install and i want to activate the visual effects. But... here is the tricky part ? i can't find them. I go system > prefenences > appearance and... i don't see the 4th tab , that used to say "Visual Effects" like it was on 10.04 .
I just downloaded and installed the latest version of Ubuntu on my laptop. After installing the drivers for the visual effects I restarted the computer, and now after the all black screen with the little white Ubuntu symbol in the middle the screen goes blank, lots of horizontal lines appear and it contrasts out to a completely blank, white, useless screen. Any suggestions? EDIT: laptop is a Toshiba 5105, bumped up to 1.2gb of RAM
I like my wobbly windows, love 'em. Recently on the latest ATI manual driver update they went away. From boot, log into desktop, my pidgin window defaults to open. Can move it for about 1.5 seconds and be wobbly then the screen does it's reinitialize thing and the window becomes non-wobbled again. At any time I can go to System > Preferences > Appearance > Visual Effects and enable the effects and they work without issue. So, start up with visual effects, something right away turns them off, I can turn them back on at any time and they will stay on. I don't think its actually anything to do with my graphics cards drivers - those seem to be fine. Rather I believe it is a Gnome setting somewhere. I have tried setting my Visual Effects to None, rebooting setting them back to where I like them and rebooting again in case it was a corrupted setting.
I have just upgraded to Lucid Lynx. Just after that the borders of disappeared. Anyway, I found out I can get them back if I enable Standard Visual effects from the appearance menu. The only problem ?i have is that the options don't get saved and I need to do this over again every time I reboot.
