Software :: Karaoke Disc (cdg) - Pykaraoke Can't Read It - How To Play The Video Portion
Jan 18, 2010
I have a karaoke disc with (presumably) 10 cdg files on it. I tried to open it with pykaraoke, but it can't seem to read the disc. I then tried k3b, which was able to rip ten ogg files from it (when I created an iso of the disc, it created ten wav files from it.) I tried opening it with smplayer but no luck. kaffeine opened it as an audio disc. When I tried to mount it with a file-manager, it gave the following results:
Code:
read-only
mount: wrong fs type, bad option, bad superblock on /dev/hdc,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I tried cdgtools from the pykaraoke site [URL], but I've not had success (cdggui.py requested a "TOC" file to open, but it can't find one on the disc). I use Debian Lenny, but if need be, I'm willing to install newer software (from either source or Squeeze), and I'm also willing, if need be, to use windows software with wine.
View 3 Replies
ADVERTISEMENT
Jul 3, 2011
Kernel 2.6.21.5, slackware 12.0
I have a dvd-video disc (that is, one like those you buy or rent, out of the shelf) which I have played before. So I'm positively sure it plays and is in good condition. Now, I run mplayer on it, and what do I get? code...
View 5 Replies
View Related
Jan 14, 2011
Is there a way to play read audio/video files (.rmvb .rm etc) using the VLC Player without installing realplayer?
View 1 Replies
View Related
May 24, 2010
I'm totally unable to play or mount audio CDs and unable to use video DVD's on my box right now. When I insert an audio CD I get a dialog box saying:
Unable to mount disc: Location is not mountable
and if I check messages in the Log File Viewer I see the following text repeated (save for the last line) a couple of dozen times.
Code:
May 24 13:04:37 Amber kernel: [ 6680.434685] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 24 13:04:37 Amber kernel: [ 6680.434691] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
May 24 13:04:37 Amber kernel: [ 6680.434695] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[code]...
on a similar but ultimately unrelated thread someone was asked to enter a few commands so I tried them and the following was the output:
Code:
main@Amber:~$ ls /dev/scd*
/dev/scd0
main@Amber:~$ sudo mount /dev/cdrom /media/cdrom0
[code]...
An error occurred: Could not open location; you might not have permission to open the file. As far as I can tell I have the relevant CSS libraries installed I'm lost without being able to play CD's and DVD's on my system.
View 9 Replies
View Related
Aug 23, 2009
To get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
View 2 Replies
View Related
Jul 25, 2010
I've had some problems with my ubuntu lately (>.<) and would like to use my Windows 7 disc to install windows side by side with ubuntu (for compatibility reasons). The problem is, my computer won't boot the disc on startup, won't read it at all, and thus I can't install it. How can I make Ubuntu read the Windows 7 disc? All other discs work fine.
Its not just my disc- I've used this disc on other computers no problem, and my Ubuntu reads other discs without any problems.
View 5 Replies
View Related
Jul 25, 2010
I've had some problems with my ubuntu lately (>.<) and would like to use my Windows 7 disc to install windows side by side with ubuntu (for compatibility reasons). The problem is, my computer won't boot the disc on startup, won't read it at all, and thus I can't install it. How can I make Ubuntu read the Windows 7 disc? All other discs work fine.
Its not just my disc- I've used this disc on other computers no problem, and my Ubuntu reads other discs without any problems.
View 1 Replies
View Related
Feb 28, 2010
Anyone else struggling to play iplayer video? I've got the proprietary Flash plugin, which means it's probably not this "SWF Authentication" thing that there's been so much talk about.
I've rebooted, tried all sorts of tinkering, it loads the applet (I can see that Flash is loading OK because other things work, and right clicking on the applet gives the Flash menu)
However, clicking the play button does nothing.
View 1 Replies
View Related
Feb 2, 2010
when i try to play a video, from internet it is showing the message 'Either javascript turned off or download and install latest adobe flash player'. But eventhough I downloaded and installed adobe flash player I am unable to play any video and still it is giving the above message. what is the reason?
View 2 Replies
View Related
Feb 15, 2010
How make, that disc be able to read and write data for all users? I have Ubuntu 9.
View 2 Replies
View Related
Sep 26, 2010
I've been trying to rip DVD's using AcidRip but whatever DVD I try I get the same error from AcidRip - Can't Read DVD track. Faulty Disc?
After reading the forums I've tried /dev/dvd ,/dev/sr0 (Found by using the Disk Utility), /Media/DVD Title etc and tried running AcidRip both as myself and Sudo without success.
View 2 Replies
View Related
Jun 7, 2010
I have a CD I want to play on my computer AND see the words. VLC plays it but don't show the words. PyKaroke plays files but won't play a CD. There's gotta be a program that does both.
View 4 Replies
View Related
Oct 24, 2010
Not sure if anyone uses floppy drives anymore much. I know that most machines don't come with them anymore unless you ask for one.One of my machines [Machine # 2] has a floppy and I have never had the occaision to use it under linux [opensuse 11.2 currently]. Until now that is! I have about 30 floppies that I need to transfer the data from. I am able to mount the floppy drive and take data off the currently inserted floppy, but if I want to insert another floppy and remove the data from it, I must unmount and remount the floppy everytime. There is an entry in fstab:
/dev/fd0 /media/floppy auto noauto,user 0 0
and a mount point in media [/media/floppy] Is there something else I need to have in the fstab line for the floppy so that it will read automatically everytime I insert a disk?
View 8 Replies
View Related
May 31, 2010
I'm having trouble with my optical drive (an LG GH22NP20).I can read a data DVD, but when I put in a standard audio CD it does not recognize it.I hear it spinning around in there, but if I check /media/ there are no files listed.?
View 4 Replies
View Related
Nov 15, 2010
Pavillion laptop crashed and I can not find all of my recovery discs. The computer will not allow me to do an internal recovery so I ordered a recovery download on line and burned to a disc. when I put the disc in the graphics came up and in started in Live-mode but then the error mess came: error while loading shared libraries: /usr/lib/libpci.so.3: cannot read file data: input/output error. The site said it was an ISO file but then it had a program it had me run to change it and burn the disc.
View 1 Replies
View Related
Jun 24, 2010
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
View 3 Replies
View Related
Jun 5, 2011
I am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
View 9 Replies
View Related
Jun 29, 2011
Is there an application on Ubuntu capable to create a video blu ray disc out of any kind of video (avi. mkv, mpeg, etc)? On my wife computer I use tsmuxer and multiavchd but I would like to run something native on my computer without the need to install wine... The use of the command line is not a problem, something like DeVeDe to mux or encode would be sweet! srt support is a most!
View 3 Replies
View Related
Jun 3, 2010
I am looking for a video converter that will convert AVI into DVD format to burn a disc. I had a program called convert X for windows 7 and with that I was able to make menu's for the DVD and when it finished converting, it would burn it to a disc.
View 2 Replies
View Related
Aug 13, 2010
I have recently installed Lucid on an Acer Aspire 5570Z laptop. It has an Optiarc DVD RW AD-7530A DVD-RAM writer. I am having trouble in playing video/movies on DVD.
When I am inserting a movie DVD, the drive is working (i.e. is busy) continuously but the disc is not being recognized and mounted. Disc Utility is showing "No Media Detected".
The same DVD discs are playing OK in my desktop (running Hardy) and on another laptop (running Lucid).
However, that Audio and data CDs are playing/reading OK in the same drive. Even blank DVDs are being recognized and mounted OK.
View 3 Replies
View Related
May 14, 2010
Just tried to play a DVD using movie player and it said 'cant read from resource' only happened recently. I used to be able to play them.
View 1 Replies
View Related
Jun 29, 2011
I can read and write data dvds, but cannot play a regular dvd now. I have libdvdcss installed. I am running Slackware 64 13.37 (just installed).
Code:
MPlayer 20101218-4.5.1 (C) 2000-2010 MPlayer Team
Playing dvd://.
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdread: Could not open /dev/dvd with libdvdcss.
libdvdread: Can't open /dev/dvd for reading
[Code]...
It can see the drive is there and /dev/sr0 is linked to /dev/dvd and I tried running as root to check if it was a permissions problem but got the same thing.
I have tried lots of different DVDs in the drive, same issue. I even switched out my DVD drive to another old DVD-ROM I had laying around, same thing.
View 14 Replies
View Related
Jan 1, 2011
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
View 9 Replies
View Related
Mar 10, 2010
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
View 4 Replies
View Related
Dec 19, 2010
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies
View Related
Dec 6, 2009
I'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies
View Related
Apr 8, 2010
i'm trying to play an .avi video and it won't play. when i double click it to launch with movie player, the player comes up and then disappears and that's it. i tried other players including vlc and they do the same thing so i'm thinking it has something to do with my OS. what can i do to fix that?
View 4 Replies
View Related
Sep 15, 2010
how to play mp3 or video in linux3, tell me the details.In linux sound driver is neccesary to install or not.
View 6 Replies
View Related
Jan 19, 2010
How do i set up firefox to play video on firefox? I've got java script installed and the latest version of flash player yet when i try to play a you tube vid it doesn't work
I'm Running FC12v
View 5 Replies
View Related
Jul 29, 2010
I want to play a video thru VLC player as soon as when system boots up. is it possible using crontab or any other way to go about it??? Also I want to play a file by telneting to a remote server (eg: the file is present is /media/disk/movie.mpg). is it possible to write a script and execute them using crontab.
View 5 Replies
View Related
