im trying to compile this file i ran the "cmake .." command and i just ran the "make" command and i got this error at the end
make[2]: *** [CMakeFiles/kmouse.dir/kinect_mouse.c.o] Error 1
make[1]: *** [CMakeFiles/kmouse.dir/all] Error 2
make: *** [all] Error 2
I'm using a program called easystroke to invoke commands from mouse gestures - typically to launch an application. 'gnome-terminal', for example. If I already have a gnome-terminal window open, and I invoke the gnome-terminal gesture, I'd like to be setting focus to the already running instance, rather than spawn a new instance, which is of course what happens now. (I am actually more interested in this for my gmail chrome app shortcut, and other larger apps.)
I'm very new to ubuntu and linux in general, but I was hoping there might be a nifty command I could wrap around my launch command that would produce this behavior. (I'm imagining some kind of singleton app list keeper program that consumes my command line, checks if it's already in the list, transfers focus to the running process if it is (and if that process is still running), or else spawns a new process and then adds it to its list using the the command line as a key.)
I need to use myevlavid2 on ns2 which is only supported for ns2 version up to ns2.30 (is not supported for newer ns2 versions): [URL] The NS installation went through well. After applying all the changes as given in the myevalvid2 installation guide, I ran the 'make' command, this is an extract of what I got:
[Code]....
i am getting this error while running in rhel 5.3 -bash: sar: command not found
View 5 Replies View Relatedwhen i upgraded to slackware-current few days ago i tried to create packages with src2pkg and i get this:
Checking for Makefile rule: 'install' Okay
Checking support for DESTDIR (or similar) - Found DESTDIR
Installing using DESTDIR - Using:
make DESTDIR=/tmp/xf86-video-intel-2.10.901-i486-1 install
Notice - Possible error running 'make install'
FATAL! Running make install has failed with error: 1
Try using INSTALL_LINE 'make -i install' Exiting...
is it because of i have slackware 32bits i installed src2pkg successfully on slackware 13 but on slackware-current if i remove it and do src2pkg --setup i get error something like cannot live without it every time. when wanting to create src2pkg-helpers.
but i want to know what im doing wrong ?
before i created packages successfully. i execute src2pkg as root
I am doing some embeded linux work in ARM 9263.So I need to make a image for that board.But when I using one command "make uImage" I am getting the following error.
make: arm-linux-gcc: Command not found
CHK include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
HOSTCC scripts/basic/fixdep
code....
I am completely new to linux and am trying to run a Fortran program for class. I typed in "make C=R" and it ran through a long list of things and then came up with that error.
View 1 Replies View RelatedWhen I go to try to install madwifi in the terminal I get the following error message after typing the make command.
Checking requirements... ok.
Checking kernel configuration... ok.
make -C /lib/modules/2.6.26.8.tex3/build SUBDIRS=/usr/src/madwifi-0.9.4-9pclos2007 modules
make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3'
Building modules, stage 2.
MODPOST 14 modules
make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3'
make -C ./tools all || exit 1
make: *** ./tools: No such file or directory. Stop.
make: *** [tools] Error 1
I am running pclos 2009.
I am trying to install iscsi-target on centos 5.4 i386. When I go into the iscsi-target directory and type make I get the following error:
[root@cluster-storage iscsitarget-1.4.19]# make
cc: /lib/modules/2.6.18-164.el5/build/include/linux/version.h: Datei oder Verzeichnis nicht gefunden
cc: keine Eingabedateien
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -lt: unary operator expected
make -C usr
make[1]: Entering directory `/opt/iscsitarget-1.4.19/usr' .....
make: *** [kernel] Fehler 2
I am trying to run a script called install.sh as follows: I get a jar file, and extract it using the command: unzip filename.jar -D path/to/files then I navigate to that directory where I extracted the files, and run the command: sh install.sh (where install.sh is one of the files that has been extracted in that directory using the above unzip command.) running this command gives me an error:'nstall.sh: command not found.' among other errors in the script ( from that portion of the script that should not even be executed, which is really weird). However, instead of unzipping the jar file, if I just copied the same install.sh file to that folder, and ran the 'sh install.sh' command, the script runs fine.
View 6 Replies View RelatedI tried to install ndiswrapper , but its showing error,while executing make command
make[1]: Leaving directory `/usr/src/linux-source-2.6.35.8'
make: *** [LINUX] Error 2
I'm new to LinuxQuestions and this is my first post. I'm trying to build rrdtool to install Cacti and encountered the following problem: 'make' step returns an error messages:
Code:
./.libs/librrd.so: undefined reference to `xmlTextReaderGetParserLineNumber'
collect2: ld returned 1 exit status
What I have doneDownload and build the latest version of pkg-config, glib, pixman, cairo, pango, atk, gtk+ from official sites.
Download rrdtool source
Set PKG_CONFIG_PATH correctly
[Code]...
There is actually another problem with the computer which is "The Nautilus application has quit unexpectedly" everytime I open File Browser application or right-click>Properties a file/directory. This happen only after installing cairo and pango and I don't know how to revert to old version. Since there are a lot of log files so I'm very confused. Can someone give me a direction on how to resolve this?
So what does it mean when I can run this command as root successfully from the command line (it will find all user.xml and zip):
But when I add it to a script (.sh) I get the error below:
Error:
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
[code]....
I am getting this error message when run the "make" command while configuring the NIS server
View 1 Replies View RelatedI am a student studying computer science course.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
Look at my screenshot at [url].
fedora finally supported the atheros card, but well it hasnt for me. Im trying to install madwifi, but everytime I try to use the "make" command. I get this error.
[code]...
I am getting an error as below.
How do I resolve the error: make[2]: *** No rule to make target `', needed by `mpg123'.
How can I resolve this error.
Sometimes I connect to my Debian box from another computer (using SSH on Cygwin or Linux), and once ina while I want to run some console apps. And sometimes some of these apps might complain about "another intance, Error: an instance of newsbeuter is already running (PID: 2496)". Is there a work around for this issue at all(without killing the original instance") ? The reason I do not want to kill the app because there might be 2 users connected to the same machine that might be using the same app.
View 1 Replies View RelatedI want to gave much details as possible. working directory (~/a1/shell) in the shell directory i have Makefile. also in the shell directory i have subdirectory's (obj, src, include)
My current Makefile
Quote:
#What needs to be built to make all files and dependencies
clean:
# End of Makefile
I wanted it so: all .o files are created in the obj subdirectory, and my application, sshell, is created in the shell directory.
I am getting this error when i run the make run: No rule to make target 'shell.h', needed by 'shutil.o'. stop
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
I have a cron job set up to backup my ~/ directory everyday at 10:00. But the cron job is not running. here is my confile that I loaded into crontab...
Code:
#backup everyday @ 10:00 AM and 10:30 AM
00 10 * * * /home/dave/bin/backup.sh
30 10 * * * /home/dave/bin/music_backup.sh
[code]....
the *.sh are executable. I logged out and logged back in since I put the cronfile in crontab. The commands that I use in the *.sh files work fine when I run them manually.
I have written a small script from that iam appending the output to a file.If multiple users invoke the same script or if i invoke the same script n number of times (using &), the output file(ZZ/OUT) contains messup information.
++++++++++++++++++++++++++++++++
#!/bin/bash
#
[code]...
i installed yumex:yum -y install yumex, when i start yumex it came with this error:fatal error:backend-not-running backend not running as expected (yumex will close) how can i solve it?
View 10 Replies View RelatedI run Ubuntu 10.04. For some reason, MySQL won't start on startup. How do I make it run on startup? I installed it by installing LAMP using tasksel and did everything according to: [URL]. Also, I have another problem: When I try to start/stop/restart mysql in the terminal, the terminal will not give me any prompts after entering the command. E.g., after entering "sudo service mysql start", nothing will happen. Even after waiting for 30min, nothing happens.
View 9 Replies View RelatedI amtrying to install a program and at the point when I am required to execute the command "make clean" and then after "make all" , I obtain the following eror message:
ndoheric@nen-laptop:/opt/WAVEFORPGM/distribute$ make clean
cd ./MyTime; make clean
make[1]: Entering directory `/opt/WAVEFORPGM/distribute/MyTime'
[code]...
i have installed Ubuntu 11.04 i.e Natty Narhwal(m i spelling it right?) i want my Ubuntu system to remember currently running applications even when i shut it down. It was possible in ubuntu 10.10...it was in startup applications(i guess). I cant hibernate. It fails to hibernate. Let me know if anyone knows anything.
View 9 Replies View RelatedI have a x86_64 i5 processor running Fedora 13.When I run the make file,I get the following error.Can someone help me out please?
# make
making all in ./lib...
make[1]: Entering directory `/home/Anil/Downloads/glut-3.7/lib'
[code]....
When I try to compile some Java code on Ubuntu 10.10 (kernel 2.6+) using make and a Makefile.
I get an error indicating that the make utility cannot execute the java compile command (javac).
The error reads: /bin/bash: line 6: .: /usr/local/jdk1.5.0_18/bin/javac: cannot execute binary file
I am executing make as root. I have enabled permissions on all directories in the path /usr/local/jdk1.5.0_18/bin/javac and on javac itself.
I get this error whether using a jdk installed via ubuntu apt-get, or whether I install the jdk myself. And I get it using either Java 1.5 or 1.6
My machine has an 80386 processor. I notice the make utility is built for i686-pc-linux-gnu
However, I can manually compile using javac.
I can compile calling javac from within a bash script.
I can compile using the java compiler gcj from the command line: gcj --main=HelloWorld HelloWorld.java -o HelloWorld.exe
But I cannot compile java code from the makefile. Any reasons why I might be getting this error?
I was having a go at compiling the latest Amarok 2.3.2. As I run make I get the following error
make[2]: *** [lib/amarok_collection-mysqlecollection.so] Error 1
make[1]: *** [src/core-impl/collections/sqlcollection/mysqlecollection/CMakeFiles/amarok_collection-mysqlecollection.dir/all] Error 2
make: *** [all] Error 2
I'm running Slackware64-current. how to prevent this error arising?