Software :: Cplay Not Viewing / Playing .flac Files?
Feb 12, 2011
I just installed cplay on Slackware 13.1 but I ran into a problem and I am unable to figure it out on my own:
When browsing folders in cplay I went into a folder containing only .FLAC music files.. it was empty! I am unable to play any of these with cplay
If I cd into that folder through the terminal and play the file using ogg123 it works fine.. cplay is just a front-end to mpg123 and ogg123... I don't know why it isn't reading these files..
I dont know where to start... I was unable to find any documentation of config file for cplay (not even a slackbuild for it.. I installed it from source which I extracted from a Debian package)
I have tried everything within my power and knowledge to get xmms2 to play my flac files, but I just get no sound. I've had to resort to mplayer for now for flac. For the record, yes I have the flac plugin installed along with the all-plugins package.
I have some downloaded files of radio programme from BBC which are .aac. I have never come across this type before. Googled it so now I am a bit wiser and VLC seems to play them without problem but they are not accepted by my upnp client devices which are happier with flac or mp3. I would prefer flac but what is the preferred conversion software.
You will need "cuetag" for this which is part of the "cuetools" but since you already installed it (see previous seps), all you have to do is open the terminal, navigate to the folder where you just splitted some APE or FLAC files and type this:
Code:
cuetag *.cue split-track*.flac ;
(if you didn't change the file's name from split-trackNN.flac). All the split-track*.flac files will have tags in just a few seconds.so i did exactly what i was suppose to do but for some reason is still could not add the tags to my FLAC files..
Code:
kon@kon-laptop:~$ cd ~/Desktop kon@kon-laptop:~/Desktop$ cd *ora* kon@kon-laptop:~/Desktop/sDvorak $ cd *CD1*
Lately I've tried rsync for backing up my home partition to an external drive, but I've run into some problems with some flac files (there might be other problematic files though, these are the ones I know of). The external drive is formatted in ntfs. Now, when adding my whole music directory (within my home directory) first as a library to VLC and then copying to the playlist, some files are not playable. I discovered this at work in windows, and resaved all the flac files using ex falso to skip windows incompatible characters. The problem persisted though. I tried the same thing in VLC in Ubuntu, and got again a set of non-playable files, partly, but not completely, overlapping the set of files that were not playable in windows. The original files (on my internal drive) are playable in VLC in Ubuntu. What to do (except to go back to cp instead of rsync, rsync is faster, but if it doesn't copy correctly, it's not worth it)?
What do people generally do with FLAC files? Do they directly play them either with a stand-alone player or with the computer or, on the contrary, they first create audio CDs with them? Please understand my post is not about not knowing what a FLAC file is. I've used programs that create an audio CD from a FLAC file many times and also, others that haven't been converted, I play them directly.
Using Ubuntu 10.04 LTS and Rhythmbox 0.12.8. First issue was I could not get MP3 to show as a "Preferred format", but then installed the "gstreamer0.10-plugins-ugly-multiverse package"; MP3 was then a "Preferred format" option. Now that MP3 is the preferred format, the CD is ripped in a "flac" format. Is there some conversion? I'm not well versed in music file formats.
I have so many flac files. I want to have 1 minute samples of the files in mp3 and a bitrate of 64. (First 1 minute of all files) How can I do that with ffmpeg command?
I've been a Linux user for 5 years, though this I only recently started using RPM based distros. I'm still in my first week using Fedora and I love it. Hats off to the development team. Now, onto my question:
I have a rather large collection of music in three different formats: MP3, OGG, and FLAC. I'd like to shrink my library by converting all the flac files to ogg. However, since I don't want to convert from lossy to lossy, I'm going to leave the mp3s alone. Is there a program that will allow me to do this quickly and easily? I'd prefer a GUI, though I'm comfortable working with the terminal if needed.
I want to try Picard for tagging flac files. (Not sure it will work). It is available from RPM Fusion repo site. Can I use this with yast to install picard?
Amarok will play flac files just fine, but when i try to index them into the library via "Update collection" they are not added.
All other threads i can find on this kind of thing also have Amarok not playing flac....but if i drag and drop them in, they play just fine, so i know its not a codec problem.
Is there something i have to enable? Like in some media players, you can set which formats are scanned for...but i cant seem to find such a feature available in any of the Amarok settings...
I have a whole bunch of wma files I want to convert to a more liked format like wv flac or shn. Shntool does not seem to want to do that soundconverter and soundkonverter both refuse too. My wma format is wma1 or wmal cannot tell if it is 1 the number or l the letter L. 1. They play in xine straight off. Xine is in your synaptic 2. To convert quickly install dBpoweramp under wine again quick and no fuss.
I downloaded a couple of TTA files and they are just static on playback. Do I need a different codec or something? Converting the files to FLAC yielded the same results. I'm running a 10.04 64bit machine.
I just installed Ubuntu on a net book. I'd like hook it up to my car's aux jack and use it to play FLAC files in my car. Is there a an media player that would be good for that? If I could set multiple hot keys I could set one side of the key board for forward and back.
I am looking for a command line command to convert ~2500 .flac files to .ogg files. All of the .flac files are in one folder and I would like to have the .ogg files put in a folder labled OGG - I would like to retain song information etc if possible.
All such conversions doesnt produce any *.flac file. It seems flac doesnt accept minus sign for the standard input although flac manual allows to use it.
So my question is how I can use the standard input in order to decode audio data with flac?
when I try to view php files on my linux box, they want to download instead of viewing them. I configured apache for php as the manual said but for some reason it doesn't want to parse the php. the http.conf file may need to be changed, that the line "AddModule mod_php4.c" was missing in the conf, however the AddModule and ClearModuleList directives no longer exist in the newer versions of Apache. These directives were used to ensure that modules could be enabled in the correct order. The new Apache 2.0 API allows modules to explicitly specify their ordering, eliminating the need for these directives.
I'd like to know how to see which files have been printed on the printer. I can see which print jobs have run and who submitted them using the following command:
Code: $ lpstat -W completed -o but it doesn't show me the names of the files that printed.
Is there a way to set a retention policy to have it hold the job in the queue even after it's finished printing? Or a command to view the details of jobs that have already run? I'm looking for something similar to the output of the lpq command.
how do I view files saved under windows internet explorer in linux. have tried mozilla firefox and here is what I get. is it possible to view the files as displayed in ie?
m: <Saved by Microsoft Internet Explorer 5> Subject: installing rpm without yum no internet yet - FedoraForum.org Date: Tue, 25 Aug 2009 00:23:04 -0400 MIME-Version: 1.0
[Code].....
also don't have internet access under linux as yet. wh at modem would you guys recommend that you know will work with linux? using dual boot ibm with windows xp h ome and linux 10
In Ubuntu 10.04, installed Chrome from the Ubuntu repos: chromium-browser 8.0.552.224-r6859According to about:plugins mozplugger is supposed to be handling pdf, ps, ppt mime types, but for all of these I get a black browser window saying "Missing Plug-in".I'd like to view these filetypes inside the browser using either adobe reader (8.1.6) or evince (or even just gv).Here is an excerpt from /etc/mozpluggerrc:
I'd like to view the log files, but when I try to view a log (such as daemon.log), I receive a message that says "You don't have permission to read the file." What do I need to do to have permission? (This is my computer. I've been an Ubuntu user for less than a year
I then installed a new version of Ubuntu 10.04 from disk and copied the files in /home from the cd to the hard. I am able to open, view etc. all the files in most directories except those in /home/documents. There are text files created by gedit, OOWP and several PDF files. I cannot open or view these files, depending: gedit and pdf files gets a Err.Msg. "Don't recognize file type" (it is clearly marked PDF) . The OO files look like rows of 'high bits' and a dialogue box opens giving me the options to change Char. Set, Font, Language, Paragraph break.
Is there a way to view all the crontab files, owned by root, users, and other system accounts, that exist on a system simultaneously rather than having to go the individual accounts? The distribution in question here is the Debian 4.0 release.
