Software :: XFCE With Dual Monitors?
Dec 24, 2010
I have a computer with a dual monitor setup, configured thanks to the nvidia-settings utility that comes with the proprietary NVIDIA drivers. Everything seems to work fine, except that I am unable to move windows between the two desktops. I can move the mouse between the desktops, but I am restricted to moving the window between the virtual desktops associated with that particular monitor's desktop switcher (virtual desktops).
How can I configure XFCE and/or xorg such that I will be able to move windows between the monitors? It is really cumbersome to use two monitors without being able to move the windows across the monitors so it would be great to find a solution for this.
View 4 Replies
ADVERTISEMENT
Jul 1, 2011
I want to be able to login on different users on my two screens. Is that possible? It would be nice if I could have the left screen and my gf could have the right. I'm using ubuntu 10.04 with gnome, and I have a Nvidia graphics card.
View 8 Replies
View Related
Apr 3, 2010
So I'm using Lenny, trying to get dual monitors set up. I'm not sure on the correct steps, but have done some googlin' and wasn't finding what i was looking for. (could be that i just missed it)
lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]
01:00.1 Display controller: ATI Technologies Inc RV516 [Radeon X1300 Pro] (Secondary)
View 2 Replies
View Related
May 28, 2010
I have a Dell inspiron 1525 laptop with a 1280x800 display and an external 1280x1024 monitor. I'm using 9.04 with openbox. I've done a loooot of online reading about how to get a dual monitor setup using xrandr, and I really don't know what I'm missing here. So here's the deal: I want to have my external monitor on the left of the laptop's display, and of course I want each of them to display different parts of the desktop.
First I set up the right resolution to each one of them (I do it using lxrandr). Typing xrandr -q in a terminal, I get the following:
[Code]...
View 9 Replies
View Related
Apr 21, 2011
I have an asus p5kpl-cm MB. I plugged in a radeon 9200 pci card. In the bios, I can set up:
pci/igd
igd/pci
igd
etc.
This determines which of the 2 displays (pci card or internal graphics on the MB) is the boot display. That determines which comes up with the bios screen and then once booted into ubuntu (10.04), this is the only adapter/monitor seen. The button detect monitors doesn't do anything.
lspci sees both my internal and pci card graphics. So, I can get either to work just fine (auto detected etc.) just not both at the same time.
I've tried all of the 3 above settings, and even when I set it to just igd, lspci still sees both my adapters. It identifies them correctly, and it works perfectly, detecting the monitor and knows the resolutions for each - just not both at the same time.
Does ubuntu know how to automatically configure more than one display w/o doing something else, or must I do something else to get both going together?
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
[Code]....
View 6 Replies
View Related
Feb 26, 2010
i have just installed fedora 11. i have two monitors. how to set up dual monitors in fedora 11 ? i tried a lot to search for a way out, however no joy.
View 2 Replies
View Related
May 20, 2010
I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA.Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this.Several issues have arisen since installation:
1) I've clicked through all of the display settings to activate the second screen with absolutely no change.
2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure.
3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.
View 1 Replies
View Related
Mar 1, 2010
I'm having trouble setting up dual monitors on my HP Pavilion dv7-1020us laptop, with an Nvidia 9600M GT graphics card, and Ubuntu 9.10. I installed Ubuntu via Wubi, on top of Windows 7. I tried this before on the same laptop when I was using Vista and Wubi, and Ubuntu was able to recognize my Graphics card, and install a proprietary driver. I wasn't able to test dual monitors, though. However, now that I'm using W7 and Ubuntu, it cannot use a dual-monitors correctly. It recognizes the monitor, but it only displays a mirror display of my Laptop monitor, not acting as a separate monitor, like I want it to. I tried messing around with the settings in the display menu, but nothing works. I tried downloading linux drivers for my card from Nvidia's site, but the file is in a .run extension, which I don't know how to install. What should I do to get this working?
View 7 Replies
View Related
May 4, 2010
I have a ATI VisionTek 9250 128mb DMS59 PCI video card that I would like to use for dual monitors on Ubuntu 10.04 Gnome. I installed the card and booted the live cd. Both monitors are recognized when I go to the display settings, but when I un-check the mirror box, nothing changes. I am still only getting one monitor. I was previously using 9.10 and it sometimes worked, but not always.
View 5 Replies
View Related
Oct 23, 2010
I just downloaded Ubuntu 10.10 and installed it today. I was just wondering, does Ubuntu support dual monitors? I tried looking through the settings in Ubuntu but I couldnt figure it out.
View 1 Replies
View Related
Nov 1, 2010
I have a brand new installation of Ubuntu 10.10. I'm using a GeForce 8600GT graphics chipset. I have two monitors, and my goal here is to have them both working under Ubuntu in their full resolutions, and I've not had any luck with this yet. I've got a Viewsonic VE155s with a native resolution of 1024x768, and a Chimei CMV 221D with a native resolution of 1680x1050. When I first installed Ubuntu, both monitors were working, and the VE155s was working in its native resolution of 1024x768, but the CMV221D was stuck in 640x480.
The Nvidia video configuration utility was not identifying the latter monitor - it only reported it as DFP-0, and doesn't allow any resolution above 640x480 to be set. The mechanism (which has a name which I don't recall) which allows the OS to interrogate the monitor's firmware to find out the monitor manufacturer, model and accepted resolutions and frequencies to use does not seem to have worked. (I previously had the Nvidia driver installed, but I've since switched back to the default open source vesa driver. I won't use the closed Nvidia driver if I don't need to, but if I need to use it to get acceptable performance from this hardware than I will.)
So I did a little bit of reading and I did some hacking of xorg.conf. Previously I had the 15" monitor working in 1024x768 and the 22"
monitor working in 640x480. Now I've got the 22" monitor working in 1680x1050 as desired, and the 15" monitor not working at all. Here's a copy of my xorg.conf. For the sake of brevity I have not included the unnecessary bits such as input devices.
Code:
Section "Device"
Identifier "NVidia"
#Driver "nvidia"
[code]...
View 1 Replies
View Related
Jan 24, 2011
I'm trying to set up my monitor and tv for dual display but I'm having some problems. I want them to display the same thing so I've enabled twinview and I figured the second display position should be set as clone but when I save xorg and restart the x server the position reverts to absolute. Anyway, the monitor is set as the primary display and it's the one I'm having problems with. The tv is fine but the monitor's display is stretched off the screen so I can't see the far right or bottom of the screen. I'm very new to linux and I'm just finding my feet so if there's any other info needed you'll probably have to be very specific.
View 2 Replies
View Related
Mar 23, 2011
The problem is that I don't have NVIDIA graphics card These are my HP ProBook 4510s Laptop's specification: [URL] And I think my built-in graphics card is Mobile Intel� 4500MHD Did anyone Dual Monitor with this Laptop or knows how to Dual Monitor with it?
View 3 Replies
View Related
Nov 1, 2010
I'm trying to get dual monitor support enabled in Suse 11.3 Previously I had this in Suse 11.2 using a dedicated NVIDIA graphics card with VGA and DVI output and this was done in a GUI. I now have 11.3 and a built in ATI card with VGA and DVI output When I run xrandr I get the following Code: Screen 0: minimum 320 x 200, current 1440 x 900, maximum 8192 x 8192 VGA-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm
1440x900 59.9*+ 75.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
[code]....
I tried using xrandr --screen 1 but it says Code: Invalid screen number 1 (display has 1) I'm looking to expand the desktop onto the second screen so I can photo edit on one screen and web browse and instant message in the other screen Currently using the Radeon R600 classic driver from ATI
View 5 Replies
View Related
Nov 19, 2009
My Dual G5's psu blew up this weekend, and i refuse to go back to windows, so until i can come up with the $$$ for a new PSU i installed Fedora 10 on an old Dell GX270.
Now, ive got 3 video cards to play with. An Nvidia Geforce4MX, an ancient matrox PCI, and the onboard intel VGA out.
Mind you, ALL of these cards work just fine on their own. All of these will work dual and even tripple monitors in XP. But i hate XP.
Now when following th xinerama tutorial, i took bits and peices from the XORG.conf files of each card to make my own..and ALL I GET on boot is "No Screens Found" so i have to remove matrox card (If plugged in) and reconfigure the X server. otherwise if i dont remove the card i get a blank screen.
Now heres the config Fedora gave me for the working NVidia card (singlehead mind you)
Code:
Now heres the one i came up with for the AGP and Matrox PCI Card:
Code:
Whats interesting is, is when i run the grep command to get the PCI id, it only shows the one card. Same when i run system-config-display, it will only detect one card/one monitor. So that leads me to beleive i have to force Fedora SOMEWHERE before it reads Xorg to detect more than one VGA card.
So right now as i type, i'm running the Nvidia, and the Intel...but the intel is just blank. i checked the log file on Xorg, but see NO intel/Matrox anywhere in the file, which makes me wonder if the system is even seeing it.
I do NOT want to go back to windows...and actually when i get my mac back, i think i'll keep this linux machien chugging on the 2nd LCD channels, just because its been so pleasant to deal with.
View 2 Replies
View Related
Jun 13, 2009
I have a dual-monitor setup with a 1920x1200 lcd on the left and a 1280x1024 lcd on the right. In Fedora 11 on GNOME, using display settings, I can configure them properly.
KDE, however, is refusing to let me configure them as separate monitors. They are stuck permanently in mirrored mode, and I can't adjust positioning or anything. Here is a screenshot of the desktop with krandr running.
[URL]
View 9 Replies
View Related
Feb 6, 2010
I am trying to get dual monitors setup but can not seem to get it working, I would like to have it extend the desktop rather than showing the same thing on both screens.
I have a pci video card with a VGA Monitor Y splitter going to 2 monitors.
View 4 Replies
View Related
May 4, 2011
I have been trying to configure dual monitors of different resolutions on 11.4 the Nvidia configuration utility does not know where or what to save anything anymore and goes wonky. Trying to use it is a dead end for me. X11 is a mess. What happened to SAX and things like this that were part of openSUSE and just worked? Supposedly we X11 got better. I think it's got over complicated and much worse. This stuff just worked in 11.1 and KDE 3.
View 9 Replies
View Related
Apr 18, 2010
I have a thinkpad T43 with a dock and a 19" Dell monitor attached. Im trying to get an extended desktop.Using the default display program (using ubuntu 9.10) I can mirror the screens just fine. But, when I click the radio button to enable the extended desktop, the monitors (both of them) go black. Some times it doesn't come out of this. (yes, I'm waiting more than 25 seconds) What can I do to make the extended desktop work? here is my display info from the command lshw:
*-display:0
description: VGA compatible controller
product: Mobile 915GM/GMS/910GML Express Graphics Controller
vendor: Intel Corporation
physical id: 2
[Code]...
View 1 Replies
View Related
Jul 6, 2010
I want my video card to stop processing an image to my integrated monitor and only process images to my external monitor.
My problem is that I use my Toshiba Satellite M65 (which is a laptop) as a desktop: I use an external monitor, external keyboard, and of course an external mouse. I only recently started using Ubuntu after many years of Windows XP and I just realized that both my laptop's integrated monitor and my external monitor are 'on', displaying the same image. I want my video card to stop processing an image to my integrated monitor.
View 1 Replies
View Related
Aug 18, 2010
I've been searching around and from what I've found this is supposed to just work but I am having some display issues when cloning my laptop to an external monitor. I think the problem is that my laptop has a better resolution than the monitor. Here is my setup:
laptop with a display of 1900x1200
external monitor with a display of 1680x1050
ideally I want to clone the laptops output onto the external monitor so they can both operate in their native resolution. When I setup twinview and set it to clone the laptop displays correctly, however, the external monitor is missing a large chunk on the bottom and right hand side
here's my xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
[Code].....
View 1 Replies
View Related
Oct 12, 2010
Does anyone know of problems where 10.10 doesn't recognise more than one monitor? I've got nVidia 8500GT and I have the 'recommended' proprietary driver installed. I upgraded from 10.04, and dual monitor was working -> restarted -> dual monitor not working.
View 9 Replies
View Related
Dec 4, 2010
I'm currently running Ubuntu 10.10 on my HP laptop with an external monitor attached. I've been having the same issue since 9.04 and just now figured I should ask about it.When I have dual monitors set up (extended desktop) the mouse speed in the X direction seems to double. ie. assume the mouse usually moves 1 pixel at a time, it now moves 2. It seems to be functioning as usual in the Y direction, which makes the motion really weird and hard to use. I'm using a Wacom tablet for the mouse, but the same happens with my laptops touch pad. Anyone else experience this/know how to fix it?
View 2 Replies
View Related
Feb 16, 2011
I have a dual setup and just switched from Xubuntus Xfce? to Fluxbox... But now I can't set wallpapers on both my screens anymore. How do I do that? I had to change the Fluxbox menu from Head 1 to Head 2 to get it on my bigger, primary screen. Which is the one getting a wallpaper when I'm setting one.
Here's my xorg.conf:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
[Code].....
View 1 Replies
View Related
Feb 22, 2011
So, for work purposes i decided to plug my old lcd monitor into my laptop so that I could have my writing on one screen and my info on the other. So i plugged it in and opened up monitor which automatically configured it. Only problem is that now on my laptop screen theres big blank spots on the bottom and on the left. No window will appear there but for some reason docky will.
View 1 Replies
View Related
Apr 11, 2011
I just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.
View 4 Replies
View Related
May 3, 2011
I just upgraded to 11.04 from 10.10 (which I had to reinstall after upgrading to 11.04 beta and attempting to install gnome 3 but I digress) and now my monitors are permanantly stuck on clone.When I go into monitor preferences and uncheck same image in all monitors I get a popup error
"The selected configuration for displays could not be appliedrequested position/size for CTRC 148 is outside the allowed limit : position=(1680,0), size=(1680,1050) maximum=(1920,1920)"
What I want to do is set one monitor to 1680x1050 and the other to 1920x1080 but basically it is telling me it needs a resolution higher than this seemingly arbitrary number...in my past adventures with this I was able to change some Xorg.conf file to increase this maximum but I think that was 10.10 and now I cannot find a file that has that setting in it.
View 6 Replies
View Related
May 19, 2011
I have dual monitors (both 1600x1200) and X is set to span them. I prefer to set my Eclipse window to 3200x1100. However, when I use VNC to connect to my desktop, I'd have to pan around a lot, so I use wmctrl via a script to resize Eclipse (and Chrome, etc.) to better fit my smaller VNC viewport.
When I return to my dual-monitor desktop, I want to resize/move my windows again. But wmctrl does not work correctly. If I do
Code:
(from a script), then instead of putting the window at 0,0 and width 3200, the window appears on the second monitor (i.e. at 1600,0) with width 1600. So I must manually resize it which is more difficult.
Am I using wmctrl correctly? Is it not wmctrl's problem but my window manager? I'm using compiz in Ubuntu 10.10.
View 1 Replies
View Related
Jul 29, 2011
I am using Ubuntu 11.04 - the Natty Narwhal 64-bit and I am using the Nvidia Xserver version 173.14.30 and it never has any problems when I am in single monitor mode but when I turn on twinview mode like this----
and click apply the new monitor first shows up black and when I move my mouse over the monitor stuff starts showing up and I am able to click ok to keep my settings
when I click ok the screens freeze. everything else works; I can move the mouse around and if I am playing music it still plays but if I click on any button nothing happens and nothing happens when I use the keyboard either. I would really like to be able to use both my monitors
View 1 Replies
View Related
Dec 4, 2010
I, too, have a dual-monitor set up. I would like to use one monitor to run X11, and the other to run a text-only mode, like when you press ctrl+alt+fX, where 1 <= X <= 6.
View 2 Replies
View Related
