Software :: What Does @Updates Mean In Yum List
Mar 20, 2009When running yum list, what is the differences between 'updates' and '@updates'. Search engines are completely useless when it comes to special characters...
View 5 RepliesWhen running yum list, what is the differences between 'updates' and '@updates'. Search engines are completely useless when it comes to special characters...
View 5 RepliesThere are some updates in the Update Manager list which I do not install. Among them, some drivers for HP Printers (I don't know why this cropped up; I don't even use printers on my laptop), and gcj updates (I use gcc/g++ but not gcj). I unchecked them the first time I saw them on my UM list. However, for every subsequent batch of new updates, UM retains these updates and I need to uncheck them every time. How can I remove them totally from my UM list?
View 2 Replies View RelatedI am more a 'terminal-apt-get-fan' then an 'update-manager-fan'. The only thing I don't know how to do, is get a list of proposed updates after sudo apt-get-update, like the update manager shows me after I pressed the "check" button. Now I bet there is a way, I just can't find it.
View 7 Replies View Relatedwhere I can find a list of Fedora 9 kernel updates (i.e. the updates that come through yum update) along with the dates they were released? I'd like to know when the last kernel I have installed (2.6.25.14-108.fc9.x86_64) was publicly released.
View 4 Replies View RelatedBut when I install new updates for Ubuntu and restart my computer to apply those updates.... a new Ubuntu with different number appears on the list of the operating systems that I need to choose from
[Code]...
does this mean every time I updated Ubuntu I'll have additional OS on my device?
When I run updates I get a long list of packages for which it says 'The following package updates will NOT be installed'. I'm wondering why not?
The only thing I can think of is I followed the guide in a sticky thread in the Multimedia forum to get codecs installed, and part of that is to change the vendor of some Opensuse packages to packman.
Code:
~> sudo zypper up
Retrieving repository 'openSUSE-11.2-Update' metadata [done]
Building repository 'openSUSE-11.2-Update' cache [done]
Retrieving repository 'packman' metadata [done]
Building repository 'packman' cache [done]
code....
I see that an update to 6.0.2 is scheduled for Sat, June 25, 2011: [URL] will I need to add "squeeze-proposed-updates" to my sources.list for 6.0.2, or will leaving "squeeze-updates" in place as is be sufficient? My current version and sources.list:
[Code]...
For some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
I just learned that warsow 0.6 is out, and went to see if it was available in the ubuntu software center yet, as opposed to going and downloading and installing it manually from the warsow website. The ubuntu repo's still have version 0.5, and at the bottom of the page it says:
"Updates: Canonical does not provide updates for Warsow. Some updates may be provided by the Ubuntu community."
So if I wanted to 'update' this item in the repo's for the better of the community what would that entail?
updates manager constantly crash i tried gnome in safe mode and it doesn't work so i need some way to update the os untill hopefully one update would fix the update.
View 5 Replies View RelatedSo, it is my understanding that Ubuntu's automatic updates do not install ANY updates that are not "important security updates." For example, it did not upgrade me to Firefox 4 automatically; I had to do it myself (Don't all new browser versions usually contain new security features/patches? Oh well...That is a separate question entirely).
ANYWAY, is there some way to get the latest stable versions of all of my open-source software automatically (or at least all at once, on command), instead of just security updates? It seems silly to have to install new versions for every program manually.
Also, related/side question: Now that I have installed Firefox 4 myself (via apt-get by adding the mozilla-stable PPA), will I stop getting security updates for Firefox through the standard Ubuntu update manager?
Actually, a really thorough explanation of the whole automatic update system (or a link to one) would be great too.
How do i download and install updates? It says package not found.
View 4 Replies View RelatedThe little red popup window (packagekit) from the lower right showed yum updates
I did a yum update and no updates!
I tried again this morning and no updates
I'm running CentOS 5.4 and noticed that for the past month there haven't been any new updates showing up either on 'yum check-update' or 'yum update' (I'm interested in basic and security updates). Although this may be right, I wonder if there is an online reference where I can check the updates that are released for CentOS (security bulletins) and make sure if there is anything wrong with my update system.
View 11 Replies View RelatedIve seen some fixes for this but they all seem to be specific to the particular user's sources.list . . . ..
Code:
Here is Line 54
Code:
I tried to change the basic toolbar to cairo dock,a tutorial that i found told me to write in terminal gksu gedit /etc/apt/sources.list.d/winehq.listso i write it and a window opened,i couled not find the text that told me(the tutorial i mean)so i closed the window,after that i keep taiking the same error
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
E: The list of sources could not be read.
Go to the repository dialogue to correct the problem.
E: _cache->open() failed, please report.
now whene i got in the winehq.list the text has gone and i take this error in update manager,my software center doesn't work and my terminal whenever i type sudo commands says
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
I get this error message: E: Malformed line 57 in source list /etc/apt/sources.list (dist parse)
I am pretty new to Ubuntu and dont really understand computer
Here is the sources list (??) as well
don't know much, but when I tried to update I get this error:
E: Type 'sudo' is not known on line 52 in source list /etc/apt/sources.list E: The list of sources could not be read.
How can I convert a file with a lot hex numbers into the decimal?
Example: file1
0x59999
0x5acdc
0xffeff
I want to start $ cat file1 | util | cat >file2 and get file2 with smth like
[Code]...
All I want is for my bootloader to show "Ubuntu" & "Windows XP" which are the only 2 OS's I have installed (dual booting). At the moment it shows Windows XP, Ubuntu, Ubuntu recovery mode & like 2 more.. which are also Ubuntu & recovery mode. I've never selected the other Ubuntu ones, only the first one. So, how can I remove the ones I don't want to show on the list.
View 2 Replies View RelatedHow would I list 4 users ID numbered 10, 11, 12 and 13 from my users list and output them to a file busers where their names are numbered by ascending order? How would I accomplish that on a one line command?
View 4 Replies View RelatedThere is a problem with my source list (apparently) I'm running 11.04 if that helps.When I try to use apt-get install update for example, I get: "Malformed line 59 in source list etc/apt/sources.list"The same error occurs when trying to access synaptic package manager, it tells me there is a malformed line and the list of sources cannot be read.This error prevents me from apt-getting anything, updating and i suspect it is affecting the software center too.
View 6 Replies View RelatedI am trying to get this script to work. The purpose is to download a list of modules from the slax.org the list consist of a list of module numbers. What I am trying to do is Download the file or the file name corresponding to the number in the list.the list is comma delimited. this is what I have done so far and I am a stand still.
#!/bin/sh
# Wget script to retrieve modules from slax.org modules
#
# ----Begin of user defined values -----
# Path to wget
[code].....
I understand there is a file that stores the repositories' information, but I can't find it!Is there a way I can create a list of what applications have been installed?The idea is that if I am running a backup, finding a way to save the repository list and applications installed so if I am upgrading, or fixing a borked system by re-installing Fedora, I could copy the repo list back, and run the applications list like ode:yum install <cat apps.txt?> and get all of the applications I've installed via Yum without having to remember them all?Is there anything else, outside of /home, I should look at backing up? SELinux settings?
View 6 Replies View RelatedI am working for a community where several people are engaged for 4 different development projects. we are planning to have a samba server to store our data.Now the problem is that I have created a share in which @groupa, @groupb and @groupc are allowed to read and write. But three of the members of @groupb are only allowed to for read permission only.
View 1 Replies View Relatedlist the 'chkconfig --list' in alphabetical order
View 3 Replies View Relatedone command to list the list of folders/ within the folder.
View 4 Replies View RelatedI have my task list in evolution (mainly so it can sync with my phone and online task list) but I always forget to look at the task list. Is there an application or plugin which periodically displays the contents of the tasklist or even better, it briefly displays the most urgent/important tasks when I login? Or anything else which automatically displays the most important tasks. Currently I have to open the task list and look at them (which I usually forget). I do not mean some kind of alarm when the task is due but more a daily reminder of what to do.
View 3 Replies View Relatedhow do I save installed packages in a list and restore ...
rpm -qa > installed-software.log
yum install $(cat installed-software.log)
sorting rpm packages by size
rpm -qa --qf '%{SIZE} %{NAME}
' | sort -n
KMail 1.11.4, KDE 4.2.4: I'm migrating from WinXP to Mandriva, and installed KMail at the weekend. Works fine, but I have a niggle - the message list displays headers grouped by month order. I'd like the option of having a simple list (no groups), and suspect that it could be done - but I haven't been able to find out how. I've checked in the Handbook without success, and a search in LQ hasn't turned up anything yet.Any suggestions gratefully received. If this isn't the right place for a KMail query,
View 1 Replies View Related