I have been using Eclipse to program in Java for a long time, and have been using Jigloo for most of my GUI design. Recently I decided to try out the C/C++ plugin. I tried installing it, but it did not work. After many attempts, I finally gave up. However, after uninstalling it I found that Jigloo had stopped working. Any other plugins I try to install now also don't work. I have tried uninstalling and reinstalling plugins, and reinstalling eclipse, but nothing I have done fixes it. Although eclipse says that the software has been installed, nothing shows up in the features list or the plugins list.
Another problem: When I install eclipse from the repositories, it doesn't install a bunch of libraries and eclipse cannot recognize standard java files.
I'm trying to dual-boot install ubuntu but when i start up the installer it doesn't see my ntfs windows 7 partiton (64 bit if that matters) but i can mount it in nautilus?
Also, the same exact thing happens in Pclinuxos and Sabayon.
I was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
I am trying to restore an NTFS partition from a backup and I need the new drive to have the old (dead) drive's UUID (which I recorded).I really really really cannot use the option of changing fstab to mount using a new UUID, for this case I need the old UUID that existed on the other drive.Is there some ntfs equivalent of tune2fs that'll let me change the UUID on an ntfs partition?
Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
have intalled Debian 8 on bi quad cores opteron, also Tomcat 8 and openjdk7 are installed, i have do a mistake about version eclipse because i have installed eclipse Kepler or the lasted version of eclipse is Luna, after douwload Luna, i have deleted eclipse kepler who was installed in /opt directory, i do the command "tar" for luna version, no problems for instaling, but eclipse luna doesn't work.I try many version of luna like 32bits and 64 bits, but nothing to do the IDE doesn't start.
Code: Select allroot@dct-skyned:/opt/eclipse# ls about_files  configuration eclipse.ini  icon.xpm  plugins about.html   dropins     epl-v10.html notice.html readme artifacts.xml eclipse     features    p2 root@dct-skyned:/opt/eclipse# ./eclipse bash: ./eclipse: Aucun fichier ou dossier de ce type root@dct-skyned:/opt/eclipse#
Storage information: 1st primary:SG 160G ATA 100 1st secondary:WD 160 ATA 133 SATA:WD 1000 2nd primary:DVD 2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup: 1.Partition list:/boot,/,/home,swap 2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying. I solved the problem by the following way. 1.Boot with windows xp's install CD and use fixmbr on (hd0). 2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1) After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0). 3.Reboot and Press F8 for a boot menu then I can select which disk to boot. windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
I just installed ubuntu via the windows executable and I couldn't mount my NTFS partition. I found this a little odd and I checked fdisk and it seems to think I don't have an ext4 partition as my entire internal HD is displayed as NTFS.
Here's the fdisk output:
When i try to mount the NTFS partition /dev/sda2 i get the following output:
I can't make heads or tails out of this. Anyone know what's going on here?
Windows recognizes that 30GB were taken from the NTFS partition for my linux install. It reads the max partition size as 465GB. fstab reports the NTFS partition size as 488GB.
I haven't used Eclipse on my laptop for a few months now, but all of a sudden I can't seem to right click anywhere in the program. The right mouse button still works for everything else (ie: in Firefox I can right click and the menu will appear). In Eclipse, though, if I right click on a project name, it will select the project, but no menu will appear (even if it is currently open project). This isn't how it used to act (nor is it, obviously, how is should act) but I'm not entirely sure what would have caused it. In all likelihood there was a system update that I forgot about, but has anyone come across this problem before?
I want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
[Code]...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
First off let me say that I love working with Ubuntu. It's a great OS to learn Linux on. Now on to my problem. I have a laptop that dual boots. Ubuntu 9.10 x64 and Windows 7 Ultimate x64. Been working just fine. I was using NTFS-Config to auto mount the Win7 partition during startup of Ubuntu. It has been running fine. I am able to move files between the linux partition and the NTFS partition with no problem. Now I've come across a problem. I big problem. Just this week I installed VirtualBox onto Ubuntu. I started creating virtual machines. 6 in all (3 Win 2k3, 1 2k8 and 1 Win7). I was saving the virtual machines to the NTFS drive as this was by far my largest drive. I used a directory titled "virtualbox" under the c:/users/public directory. This setup was working great. Was able to get my vm's patched and up to date. Created several snapshots. Basically I was a happy camper.
Last night I booted into Windows 7. OS started fine. I was just surfing the web. After that I rebooted the system and entered Ubuntu and started Virtualbox. I tried to start a vm and it complained that the virtual harddrive was missing. I checked to make sure that the path was correct for the virtual drive and discovered that the entire virtualbox directory that I created on the NTFS partion was gone!!! Everything else was in place and intact including music and large video files that I had downloaded to the Ubuntu partion and moved the the NTFS partion.
I save these virtual machines???? Should I abandon using NTFS-Config. This is somewhat critical since I had took sometime to create this test lab and to have it disappear from simply booting into Windows 7 is crazy.
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP Mint Ubuntu-Studio Edubuntu One of the E17 OSs Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I have been writing PHP using Adobe Dreamweaver; I have been looking around for an application that focus more in PHP.I have found:
[URL]
and:
[URL]
I know Zend stands behind PHP and that Eclipse is a popular open source IDE. What is the difference tho?Is the PDT Project only a functionality that could be added to Eclipse IDE? Is Zend for Eclipse a stand alone IDE for PHP? if so, Why the Eclipse in the name? I have downloaded Zend Studio for Eclipse, so far it seems very complete (no that have learned how to use all its features).
The Metrics plug-in supports Java development well at Eclipse.
[URL]
I would like to know if it supports Eclipse CDT, so I can use it with my C++ project. Any thought? If it doesn't support CDT, is there any good static code analysis tools available for Eclipse CDT?
I recently had to reinstall Eclipse on ubuntu 10.10 and i did it twice, once just removing eclipse package, and the second time removing every package associated with an eclipse install.when i launch eclipse I go into my package view and select a package and then double click on a Java file.
I create Backup partition with dd and save my backup on NTFS partition. i want recover this backup,what should i do? can i use boot cd and use dd command for recover it?
When I installed Fedora I wasn't paying attention and used my whole hard drive for Linux. Now my Vista is gone, and I don't have an NTFS Partition to reinstall it. Obviously this one is not formatted right... But I want to know how I can add a new NTFS partition to be able to reinstall Vista. I don't care if I have to delete Fedora... I'll just reinstall later using more attention.
I recently installed Fedora 13 (the KDE spin). It detects correctly my other NTFS partitions and will mount them perfectly if I click on it using Dolphin.
I would like to mount one of them automatically after booting (or logging in, doesn't matter). My first idea - and supported by a coulple of Google searches and previous threads - was to put them on on /etc/fstab.
But to my complete surprise they aren't there. Where does Dolphin (or KDE) keeps information about partitions? How to set them to automount? Also, fstab refers to my linux partitions as UUIDs not the device names - how does this work?
What should I do to set a NTFS partition to automount on Fedora 13?
I am not sure if this is the right place to ask, but I am trying to find out how I can modify forms on my Windows partion. I am running a dual boot with Win 7 and Open Suse 11.2. I can access and read the NTFS files but can not change them or add to the Win 7 Partion. How do I change ownership and permissions so that I can work on them from Open Suse 11.2
I need to expand my ntfs and have ample GB, all taken up presently so if I create some unallocated GB's under ntfs how do I expand the ntfs partition. I have gparted live CD.
I want to create another NTFS partition out of the partition that currently has Windows XP. In other words, I want to have C: for Windows XP operating system files but have the new D: for data.
i have an ntfs partition that i want to mount. before 10.4, all i had to do was add:
Code: /dev/sdb2/media/Sharentfs-3guser,auto,locale=en_US.utf800 to the fstab, and it would be mounted on startup, but now i can't do that. when i try to
