I am running Fedora 14 with the Gnome desktop and I have a 1 TB external hard drive that is msdos with approximately 200 gbs of data on it. I can unlock it and even read and copy files to my internal hard drive but I cannot add files to it, I use to be able to. I didn;t think i changed permissions.
View 3 Replies
I can't seem to get an encrypted partition to recognize a keyfile. It is a backup partition that I would like to keep unmounted until a cron-script runs once a week to backup my sensitive data. In order for the script to run without my assistance, I thought I'd use a keyfile to authorize the mount.
So far I've created a keyfile and have added it to the partition using "luksKeyAdd". It didn't really say it was successful, but when I do a luksdump, it shows that another key slot has been enabled, so I believe it worked. After that I created a /etc/crypttab file with the following:
Code:
backup_sdd1 /dev/sdd1 /root/backup luks
/dev/sdd1 being the backup partition, and /root/backup being the keyfile
After rebooting, I am still prompted for a password when trying to mount the encrypted partition (sdd1), and there is no device "/dev/mapper/backup_sdd1" created like I believe there should be. I haven't added any entries to fstab, as I don't want this partition to mount at boot.
I am trying to change the splash screen (Lucid 10.4) on an encrypted drive (cryptpo LUKS)
I've used to gimp to modify the png files in /lib/plymouth/themes/ubuntu-logo (both ubuntu_logo.png and ubuntu_logo16.pgn).
These changes show up when the machine is shutting down, but not when it boots (I get the same Ubuntu splash screen that allows me to enter the encryption password). I'm guessing because I'm using an encrypted drive that the plymouth theme and images are stored in an encrypted partition ....maybe /dev/sda1?
Could someone confirm this, or suggest how to change the splash screen for 10.4 if using drive encryption?
I am trying to install freeBSD on F14 (with LUKS encryprion). freeBSD doesn't detect hard-drive, probably coz of LUKS? Now what can I do within F14 to format harddrive and remove LUKS to get in a shape that I can install freeBSD or other OS.
View 1 Replies View Relatedis there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies View RelatedMy laptop has only Debian on it. Except for /boot, the entire hard drive is a giant encrypted LVM partition. It takes Clonezilla 13 hours to back up to a USB hard drive without verification, long enough to make sure backups aren't done much. Is there some way to make an encrypted bare-metal backup of only what is used (except swap) instead of every sector? Backing up across the LAN would be ok.
View 6 Replies View RelatedI am looking for a guide for Fedora 13 that tells me how to:
1. Create an encrypted partition on an an external USB hard drive
2. Tells me how to setup Fedora to ask me for the passphrase when I plug in the drive
3. Automounts the hard drive to a set location
The guide should deal with the situation that the computer can mount without declaring the external hard drive is not there.At present my attempt at mounting my Samsung Story USB2 hard drives does not meet criteria 2 and 3.
I have an image fiole of a hard drive which has been encrypted. When i load the file in to software to view the disk in a hexidecimal format, i need to find there the boot sectors are etc I also need to find out the "md5 hash" which is used?
View 1 Replies View RelatedI need to clone LVM encrypted to a bigger size hard drive.
Need help with MBR, how should I do it?
I was trying to fix some hardware on my laptop and i ended up mucking the whole thing up. The HDD seems to fine though. I have it in a external HDD enclosure and it's plugged into my mothers desktop through usb.I'm trying to print some files I have, but my home directory on the external HDD is encrypted.
View 3 Replies View RelatedI want to access my hard drive to copy over my old documents. So I boot into a LiveUSB, mount my ubuntu partition, and then cd to my home directory, but I can't open it. I get "permission denied." I encrypted my whole home directory and know the password, but how do I "decrypt" it or login as the partition's root so I can access the documents that way. I'm booted into the USB, but can't access the home directory. I get "You do not have the permissions necessary to view the contents of 'jake'".
View 1 Replies View RelatedI have a really tricky and may be intresting problem with a encrypted disk partition (cryptsetup luks...) which was fine until it accidentally got re-formatted by an instance of Windows 7. Most of the data on that 1TB-disk will probably still exist, only the LUKS header at the very beginning of the partition is - of course - gone.
So when I try to open the container, it gives no verbose, just the return value 234.
I scanned the whole partition for other LUKS headers with hexedit, none there. But, luckyly I have another partition which is encrypted in the exact same way with the exact same passphrase (which I remember very well!), so I had an idea: I copied the LUKS header (592 bytes) from the other LUKS encrypted partition over to the damaged partition.
When I now issue
Code:
Code:
No key available with this passphrase
Here is the command how I created the container:
Code:
How do I get the existing passphrase accepted by LUKS?
I am trying to get Slackware 12.2 running on a system with two identical harddiscs using RAID-1, LVM and LUKS.
Here is what I get:
Code:
The system is still the same, however, the results of upgrading or installing 12.2 are different. The system refuses to boot. The screen messages during boot seem to suggest, that the RAID system is "seen" by the system, but the encrypted filesystem is not.
I can boot with the installation DVD, however, and
Code:
I have two basically identical harddrives that are encrypted with LUKS containing a complete debian installation:
Code: Select allroot@x200s:/home/b# lsblk --fs
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ext2 0b851969-281e-4db2-8a5b-3798e801711b /boot
├─sda2
└─sda5 crypto_LUKS cfcf63ef-448a-4f72-9f58-8f7731cf3dfc
└─sda5_crypt LVM2_member 21CS3f-SQeQ-XcMr-kyDs-OPtR-egmT-HkvJAu
[Code] ....
sda is what I currently run to write this text, sdb is my former harddrive, connected via USB.
I want to access the root partition on sdb.
The problem is:
Code: Select allcryptsetup luksOpen /dev/sdb5 oldhd
Enter passphrase for /dev/sdb5:
root@x200s:/home/b# ls /dev/mapper/
control oldhd sda5_crypt x200s--vg-root x200s--vg-swap_1
root@x200s:/home/b# mount /dev/mapper/oldhd /mnt/
[b]mount: unknown filesystem type 'LVM2_member'[/b]
[Code] ..
Before all this, both sda and sdb where in the same volume group. I renamed the volume group of sdb to "oldDisk"
using
Code: Select allvgrename <UUID> oldDisk
How I can access the data on the root filesystem of my sdb..
Is it better to install LUKS to raw disk (/dev/sdb) or disk partition (/dev/sdb1)? What are best LUKS options?
"cryptsetup benchmark" output
Code: Select allPBKDF2-sha1 1310720 iterations per second
PBKDF2-sha256 862315 iterations per second
PBKDF2-sha512 590414 iterations per second
[Code] ....
Is slow hash better or how to choose it? It is clear that aes-xts is best choise. Is 265 bit key good?
I need to access /etc/modprobe.d on an encrypted LVM LUKS partition. I m not sure how to go about it though. Mount usually handles my mounting needs, do I need to decrypt the physical volume first? LIst of commands need would make my day.
View 1 Replies View RelatedI run fedora 13 on my laptop (dual boot with Windows 7) and I just created a new partion to hold sensible data, encrypted with LUKS. I followed this tutorial for creating it.Now, everything went well and the new partition works well. But I needed something a little different from what the tutorial suggested, because I don't want the partition to be mounted on the system each time it boots, but I would (unlock and) mount it manually when I need it.
To do so I just didn't follow the Tutorial steps from 7 to 13, thinking that without the changes to crypttab and fstab the partition wouldn't be even touched by the start up process. And that's partially true: the partition isn't mapped nor mounted in the system when I boot, but the problem is that it however keeps asking for the passphrase to unlock it even if it doesn't get mounted or mapped.It just asks for it before the system loads all it's parts (udev, filesystems, etc) and I can't understand why, what it uses it for if it doesn't unlock it.So my question is: why does it ask for the passphrase to unlock luks if I haven't set crypttab and fstab to mount the partition on start up?
I have encrypted a partition while installing Fedora 13, and I need to disable its automount - I will mount those manually.
But even though I commented out the corresponding line in /etc/fstab, I am still asked for the passphrase for the partition at startup.
How to completely disable this behaviour - and how to mount the partition manually afterwards?
I recently installed OpenSUSE 11.4 64 bit with GNOME yesterday and everything is going fantastic. I like it much better than Ubuntu 10.10 64 bit Maverick Meerkat because it is much more stable, reliable, and dependable. I own a heavily modified ASUS N61JV-X2 notebook PC. I installed OpenSUSE using the LVM based method and LUKS encryption. When I turn on the power to my notebook PC, it asks me for my password to decrypt my Intel 2nd Generation 160.00 GB Solid State Drive. I expected this behavior. However, I never get to see the OpenSUSE login screen. After I type in my password to decrypt my SSD, it loads up the desktop immediately. How do I configure my OpenSUSE so that I can see the login screen so that I can select my standard user profile and enter the user password to login?
View 9 Replies View RelatedI need to move a LUKS encrypted partition to the end of a harddrive to expand another partition. Does anyone know how to do this?
Is it possible to do this with other partition editing programs?
Gparted doesnt support LUKS/LVM
I'm just wondering - what is the best way to set up your encrypted volumes with dm_crypt and LUKS?
My understanding was that aes-lrw ws better than aes-cbc - and then I stumble upon [url] which says that LRW has some problems, and XTS is better? I dont know enough about encryption theory to be able to say anything, so i'm hoping some folks more enlightened will be able to say something here.
I was previously using aes-lrw-benbi to set up a volume. If xts is truly better - should i be using '-c aes-xts-benbi' then?
OpenSuSE 11.1 is by far the best SuSE version in a long time. It's generally up to competition or ahead of it. It's admirable, how thoughtful this system is set up, and how clean and fast it is compared to its predecessors. It ssems, that SuSE is fighting its way back to where they came from before the Novell "merger."
Having said that, it is even harder to understand, IMHO, why the installer doesn't support encrypted root partitions. Of course, there is a manual solution:
http://en.opensuse.org/Encrypted_Roo...ith_SUSE_HOWTO
However, this HOW-TO doesn't explain how to combine LUKS encryption with LVM on a RAID-1 system, as described for Slackware 12.2 here:
[url]
[url]
Is there a similar guide anywhere available for OpenSuSE 11.1?
If not: Would it be possible to do all the low-level setup work, like partitioning, setting up the logical volumes and encrypting everything, with Slackware, following the document above, and then install OpenSuSE 11.1 on that system? Would that work?
Anyone had any experience with unlocking a LUKS encrypted root partition via ssh? It is ok to leave /boot unencrypted.
There are a few pages from google with the debians variants, archived by putting dropbear into initrd.
I like to do that with my fedora/centos remote servers, but struggle to find any resources specific to it. Anyone has any suggestions and thoughts as to what might be a suitable way forward?
I've had everything but /boot on LVM LUKS encryption since I installed 11.4 on my netbook. Suddenly it won't accept my password and boot. Nothing had been updated since the last successful boot. The only possibly different thing that occurred was that I had plugged in my Android phone to charge before it booted up. Anyway, the specific error it gives when I enter the password (and I'm absolutely sure it's the correct password):
Code:
No key available with this passphrase.
Here is everything else on the screen:
Code:
doing fast boot
Creating device nodes with udev
[number (not sure if relevant/unique)] fb:conflicting fb hw usage inteldrmfb vs VESA VGA - removing gen
Volume group "system" not found
[Code]...
I'm trying to have a LUKS encrypted partition mounted at startup and to have GDM ask for my key so it will decrypt. Now I followed [URL] to the letter. Except for now, I have it just mounted into /mnt/cryptohome so I'm not messing with my system. My problem is the one everyone mentions in the comments, ubuntu isn't asking for the LUKS key in the X display, it's asking in the first terminal (Ctrl-Alt-F1). This will not do. I need it to ask to mount my drive before I'm even asked to login, so eventually I can encrypt my /home.
View 9 Replies View RelatedI'm having a problem auto-mounting a new luks partition. I have crypttab and fstab entries. I already have my primary encrypted partition (root) mounting at boot (from the install), but after creating this one manually, it does not open on boot. It auto-mounts when I run the following command manually after boot: sudo luksOpen /dev/disk/by-uuid/<uuid> mycrypt
/etc/crypttab entry:
personalcrypt /dev/disk/by-uuid/a1af5b7b-db58-4690-b586-b74407795e2c none luks
/etc/fstab entry:
[code]...
I have an external 300GB (Toshiba) disk which I encrypted (using cryptsetup luksFormat) and then installed an NTFS filesystem on (need to be able to use it in both Linux and Windows - using FreeOTFE). The disk mounts fine in windows and on my Fedora 10 system it automounts.
I can manually mount it on the RHEL5.3 system, and gnome-mount gets as far as recognising that it is encrypted and asking for the key, but it doesn't then mount it - I then have to manually mount the /dev/mapper/luks... device.
Does anyone know how to do this - if it works in Fedora 10 it ought to be possible to get it to work in EL5.3 I'd have thought.
How can I get a LUKS encrypted partition on an external USB device automounted with r/w access for non-privileged users?
Background:
I just reformatted an external USB device with ext4. The only partition is LUKS encrypted. Now, when I plug the device to my computer, KDE notifies me and asks me to enter the LUKS passphrase. Then it mounts the device. Little snag here: Non-privileged users have read-only access.
My user is a member of group plugdev, but not of group disk, as this was discouraged several times, e. g. by Robby Workman. With non-encrypted disks regular users have read/write access, or can change the filemodes accordingly, as far as I recall (currently I have no more non-encrypted disks left to verify it...)
I have a 160GB harddrive with 2 partitions:
1. /dev/sda1 ext2 100MB (this is my /boot partition)
2. /dev/sda2 LVM2 Remaining space (this is my physical volume and is LUKS-encrypted)
There is 1 volume group, slackvg, and 3 logical volumes:
1. swap 2GB
2. root jfs 10GB
3. home jfs 50GB
I would like to shrink /dev/sda2 to make room for another regular partition, is this possible?
I have a setup that looks like this
[Code]....
and I'm dumped into recovery mode. However, if I remove these mounts from /etc/fstab via comments, I can wait for the system to boot (which it does very quickly) then mount the mapper devices myself. So what is going on? Has something changed wrt logical volumes, or is this just systemd? I can live with manual mounting, but any advice on resolving the automatic mounting situation would be great.
[Code]....
