Slackware :: Samba Clinet Not Working Right In KDE4 And Slack 13.1?
Jun 1, 2010
needed was working either out of the box or with the addition of a few slackbuilds from Slackbuilds.orgOne or two problems which I will make separate posts for :Problem with the samba client - my home server has a large samba share on it that I need to access from teh laptop that is running 13.1. If I type smb:/ into the dolphin or konqueror address bar, I get to see the network and the servers. I even see the shared folder on the server. However, on trying to open this folder I get : Quote:The process for the smb://<my-server-name> protocol died suddenlyI know that the server is serving OK, because from the command line I can do a
Code:
mount.cifs //<same-server-name>/<folder-name> /<somewhere-on-my-filesystem>
command and I can browse the shared folder from that <somewhere-on-my-filesystem> either at the command line
[code]....
View 3 Replies
ADVERTISEMENT
Dec 23, 2009
I have a XPS 1530 and when I type
lsusb
[code]
It seems to be that the camera is recognized by the OS but it is not working when I try to use it in skype or in EVO.
View 1 Replies
View Related
Dec 24, 2009
I am having problems getting Seamonkey 2 and 2.0.0.1 to run on Slackware 12.2. I have tried the packages for 12.2 in patches/packages/ and the package from the seamonkey website, both with identical results. Seamonkey appears to start, and does appear in the process list, however no windows appear and it uses little memory and no CPU cycles. No messages appear in the console if I start it from there. I have to kill the processes (seamonkey , run-mozilla and seamonkey-bin). I have tried removing my Seamonkey profile, with the same results.
If I try to build the slackbuild I get this error:
Code:
checking for cairo >= 1.8.8 freetype2 fontconfig... Requested 'cairo >= 1.8.8' but version of cairo is 1.6.4
configure: error: Library requirements (cairo >= 1.8.8 freetype2 fontconfig) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.
configure: error: ./configure failed for mozilla
/usr/bin/gmake -C mozilla default
gmake[1]: Entering directory `/tmp/comm-1.9.1/mozilla'
gmake[1]: *** No rule to make target `default'. Stop.
gmake[1]: Leaving directory `/tmp/comm-1.9.1/mozilla'
make: *** [default] Error 2
The version of Cairo I am running is the standard Slackware 12.2 version cairo-1.6.4-i486-1.tgz, which to my knowledge, has never been updated (there is nothing in /patches/packages for it, anyway).
View 5 Replies
View Related
Feb 3, 2011
I'm building a slackpackage for TeamSpeak3, i got everything to build and link correctly, but the problem i'm having to me seems rather minor, but it is annoying, i can't get the description when i install it using pkgtool to show up, even tho i do have a slack-desc in the install folder of the pkg itself, and i believe it to be properly formatted.any suggestions as to why it wont show up?i've attached the slackbuild and slack-desc to see if i'm missing a step.
View 7 Replies
View Related
Apr 18, 2011
I have just reinstalled slackware on my old p4 3.2 box clean install formatted hard drive no other packages installed.is there something seriously changed from slack 10 to slack 13.1 ?? or do i suffer from C.R.S ( cant remember s***)
View 5 Replies
View Related
May 17, 2010
I am trying to setup a DNS on Fedora12. Here is my /etc/named.conf file
Code:
options{
listen-on port 53 { 127.0.0.1; 172.17.70.150; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
[Code]...
View 5 Replies
View Related
Apr 18, 2011
I've install Slackware 13.1 and i cannot shutdown my PC. The shut down process stop while trying to run PCMCIA module.
This is the first time that happens.
From Hardware point of view , i didn't do anything at all (if that helps).
View 5 Replies
View Related
Dec 23, 2010
Anyone upgraded php to 5.3.x in slack 13.1?
Could you please share the slackbuild?
View 7 Replies
View Related
Jul 2, 2011
I installed a slack 13.7 on an old laptop. KDE was set as default desktop. then I login and run startx and I saw KDE first screen display. after that I saw blank screen with a mouse on it. Then it stayed there and it seems try read some in my harddisk since the persistent harddisk light.
View 3 Replies
View Related
May 2, 2011
When I try to put slackware to sleep or have it hibernate the system simply sits with a black screen. Normally it would do this for a short period of time immediately before the actual sleep state (screen powered off, croissant light on) is entered, but currently it does it indefinitely. My sleep USED to work just fine, it broke after some unclean shutdown or another, basically I just want to know what I can try resetting to try to get it back to normal.
Slackware64 13.1, running on thinkpad X61.
EDIT: Of course the second I make the post I think of trying to sleep/hibernate from the command line instead of through X/GDM (Gnome SlackBuild). That works.
View 1 Replies
View Related
May 2, 2011
I have some doubts about the official Pat's upgrading procedure. In the UPGRADE.TXT file, one of the stepts says:
Code:
upgradepkg --install-new *.t?z What does --install-new mean? Pkgs I have no installed on my 13.1 will be installed on the 13.37 upgrade? For example, I did not installed KDE on 13.1. Will be installed when upgrade? - What about third party pkgs? Slacky, SlackBuilds.org, compiled by myself. Should I remove them before upgrading slack?
View 10 Replies
View Related
Sep 1, 2010
Does it mean that a 64 bit version is not multi-core?
View 11 Replies
View Related
Mar 21, 2011
Has anyone here succeeded in getting armed slack running on a consumer kirkwood device .ie. one without serial console? I have a tonido plug that I want to liberate. By default the plug boots first from the external usb, so I would only need to set up / on the first partition. I would be very interested to know if someone had managed to install slack to the internal nand without bricking it.
View 9 Replies
View Related
Dec 18, 2010
I downloaded Qt SDK file (530 MB and file is ok ) qt-sdk-linux-x86-opensource-2010.05.1.bin, I type in console ( slackware ) like in manual for installation at site
Quote:
chmod u+x qt-sdk-linux-x86-opensource-2010.05.1.bin
but when I type second command for installation
Quote:
./qt-sdk-linux-x86-opensource-2010.05.1.bin
I get error message
Quote: bash: ./qt-sdk-linux-x86_64-opensource-2010.05.1.bin: cannot execute binary file How to install ?
View 7 Replies
View Related
Jan 30, 2010
I compiled it from source, i installed it via slackbuild but it didn't work. When i go imlib-config --version it shows me the old one, and when i try to install giblib it tells me that imlib2 is not installed. I watched the output from the installing of imlib2 and i realized something's wrong: there are several suspicious warnings :
[Code]...
View 10 Replies
View Related
Feb 8, 2011
I don't know if i'm doing anything wrong but, to change the bootsplash picture its just change the slack.bmp in lilo.conf and reboot?
View 6 Replies
View Related
Mar 18, 2010
my problem, I have Slackware 13 dual booted with vista on a dell 1545 2 ghz 2gig ram. to these forums I have gotten everything working except my creative zen vision M 30g. I have tried alll the suggestions posted here and other places on the net. Here is my output from lsusb.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
any way i can transfer files back and forth to this would be great since it does not work in vista either. and I am pretty sure 99.9% that I have all the libmtp, libnjb, and whatever other libs are needed installed but in gnomad it says no devices found on USB hub. I hope this is enough info and someone out there has the trick or maybe I am missing something obvious.
View 2 Replies
View Related
Jul 9, 2010
i installed compiz fusion on my slack 13.1 i installed in the good order all the packages nevetheless when i try to use DBUS in command line i don't have any response from compiz
here is one example
Code:
dbus-send --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/switcher/allscreens/next org.freedesktop.compiz.activate string:'root' int32:`xwininfo -root | grep id: | awk '{ print $4 }'`but no reaction .what can i check to have a functionnal DBUS ?
View 3 Replies
View Related
Feb 26, 2010
I have downloaded the packages from Slackbulids and installed also the required packages from slacky.eu but still it says that probably pyqt is not installed. I have installet latest Sip and latest pyqt ver 4.
View 1 Replies
View Related
Apr 30, 2010
i know that there is a reset button on the back but after reset i dont know what to do with it. right now i m using pppoe connection which only works in windows and bt4 and i want to make it run in slack 'cause now slack is my main os(66hr since i switched to it :0) so i want to configure the modem in a way that i work in slack. and i m dumb about PPP/TCIP/DHCP and btw i like "the" slack
View 7 Replies
View Related
Jul 6, 2011
I like GNOME. So, I want to install gnome 3 as my desktop environment.
View 9 Replies
View Related
May 31, 2011
I installed slackware on my laptop last night, :-) very happy. Can't wait to learn more about linux and even computers in general. I've already learnt heaps since entering the alternative operating system world. Anyways, i've got xfce up and running with slack now, created a new user 4 my self. And now i'd like to get some updates and stuff, but i need to use my mobile broadband. It's a telsta dongle If that changes the circumstances. How would i go about setting this up?
View 2 Replies
View Related
Sep 4, 2010
I am trying to setup a PXE booting environment in my network and I almost got it to work... Only it does not quite work yet... Basically, I want my laptop or any other machines to boot from my network. I followed the instructions from AlienBob to do so. I setup my laptop to boot from the NIC, it automatically gets an IP from the DHCP server (pfSense);
I setup my gateway/DHCP server (pfSense) as is: -The IP address from the network boot server: 192.168.0.101 (the server where my slackware mirror and all tftp boot files are) -The filename used for network booting: /mnt/it-maintenance/tftpboot/slackware-13.1/pxelinux.0 (the absolute address of pxelinux.0 in my server)
I setup the network boot server (running slack 13.1) as is: -uncommented the line in inetd.conf to have:
Code:
tftp dgram udp wait root /usr/sbin/in.tftpd in.tftpd -s /tftpboot -r blksize
-added a NFS share to /etc/exports to have:
Code:
/mnt/it-maintenance/operating-systems/slackware-13.1
192.168.0.106(ro,sync,insecure,all_squash)
[Code]...
View 8 Replies
View Related
Jun 9, 2010
I have myself a perfectly working slackware 13.1 64 on my pc (well, tbh I gotta solve some ati and kde compose issues),BUTI can get no joy when trying to make it work in friend's pc.The slackware 13.1 32 install runs ok. I can even log in and run a init 4 session on kde.But with no apparent reason hard crashes (completely frozen system) hit the system aleatory (never last more than 5 minutes)
View 14 Replies
View Related
Feb 2, 2010
so, I was wonderin just how many distros are slack 13 based?I know Absolute and SalixOS is.I tried installing Vector Lite (12.1) and no mouse and other big issues?was gonna try Zenwalk, but heard its Dead?So, are there any other 13-based distro's?
View 14 Replies
View Related
May 4, 2010
I understand that making any changes wrt to kernel on Slackware one has to rerun Lilo. If an install was made onto a disk already using other distros and Grub and wanting to keep Grub, do I still need to install Lilo?I believe that one could use the 'chainloader' entry in Grub to boot the Slackware. And Lilo can be installed to its own / root partition.I suppose really what I'm asking is Slackware totally dependent on Lilo?
View 26 Replies
View Related
May 8, 2010
I want to make my Slackware as me which Runlevel I want to use on startup.There should be the code for that at the end of rc.1 and default Runlvl 1 in the inittab.
View 4 Replies
View Related
May 1, 2011
I would like to say that I am very pleased with it. It has been easy and simple setting up. That being said, I am in a little bit of a bind. I installed Slack on an old laptop to test it out. I installed everything except for KDE and the various video drivers associated with X that I knew I didnt need. I am wanting to now install Slack on my usual laptop to be dual booted with Windows 7. However, I still need to keep most of the hard drive space in the Windows partition, so I am limited with the amount of disk space that I can give to Slack.
My test installation is about 4.5GB. I want to have as much space available for my files as possible and not for the operating system. My necessities as far as my packages go are X, firefox, flash, java. Any window manager will do. What would you guys suggest as far as trimming down my installation? below 2-3GB would be good, any lower would be best.
View 14 Replies
View Related
May 5, 2010
can I upgrade the kernel on my slack 12.2 to the version 2.6.29 or higher?I need the kernel must support the KMS mechanism.Why I need KMS? I want to define virtual screen of size greater than 2048 x 2048. Why I need so huge virtual screen?To run two-display configuration on my dual-head Intel graphic card. At the moment I can set max 2048 x 2048 virtual screen which is not enough for my two displays:LCD of notebook has 1400 x 1050 resolution, and external LCD panel 1280 x 1024. At this moment a part of desktop is on both displays. Small part but causes some problems, and at this moment only awesome (really awesome) window manager can handle this configuration.
View 9 Replies
View Related
Aug 20, 2010
I want to use a different bmp image in Lilo when the system boots up. What I want to know is how do I get this new image to confirm to the specs as detailed in liloconfig. Or are these specifications only a guideline?
View 15 Replies
View Related
