Using slack 13 this started happening after my last 'upgrade-all' with slackpkg where I think it updated ssl and sea monkey. When I shutdown (fluxbox) it hangs at "starting up x11 manager" I have to ctrl alt del to get it moving again.
View 3 RepliesI installed ubuntu 10.10 and everything works perfectly, but whenever I go to shutdown/restart, after showing the ubuntu logo (just like when you log in), the logo goes away, and it just hangs/freezes there.
I've tried waiting even for 10 minutes, but nothing. It there anything I can manually edit for it to just shutdown? If it helps here is my PC...
[URL]
...and to be specific the WLAN module is a Ralink RT3090.
What is the best method for debugging the booting process? Is there a cheatcode (tried debug and failsafe). Slackware 13.1 with standard linux kernel 2.6.35.8. I having a problem with a dell server 2860 booting my build. It is hanging on
[Code]....
Booting my previous kernel 2.6.27.27(different disk with different initrd.gz) it loads the same as above but continues with
Code: loading iSCSI transport class v2.0-870 iscsi registered transport tcp I'm stumped it the problem is with the ata_piix module or the iSCSI transport module or some firmware I might be missing. I booted other pcs without issue.
I have done 3 clean installs for this problem and it remains, i don't want to do it from the terminal..(Buttons exists but they won't work...)
View 3 Replies View RelatedI've install Slackware 13.1 and i cannot shutdown my PC. The shut down process stop while trying to run PCMCIA module.
This is the first time that happens.
From Hardware point of view , i didn't do anything at all (if that helps).
I just recently installed slackware 13.37 as a fresh install. In firefox, I currently only have the flashplayer plugin installed, no themes, no other add-ons. Firefox will open fine the first time, however after I close it and try to open it again, I get a message saying that firefox is already running and the process must be closed before another session can be opened. Looking through the open processes, firefox-bin still shows open. I can kill -9 firefox-bin and restart firefox, but then I have the same problem after close. I have deleted my .mozilla folder, which did not help and I have deleted the libflashplayer.
View 13 Replies View RelatedOS = Slackware 13.1
I'm normally a KDE user but tried xfce4 and found that it works nicely. I wanted to switch to it for a while. I did find one particular problem: When you try and end the session, you can Log Out but can not Restart or Shutdown. If you click on Restart or Shutdown it asks for password Even after entering a valid password, it will not allow the action.
(I tried user and root's passwords.) It says "Please enter your password." After entering the password it says, "Either the password you entered is invalid, or the system administrator disallows shutting down this computer with your user account." (Before you ask; my user is in power group.)
I tinkered with it for a while and decided it must have something to do with KDM and so I switched my default runlevel to 3 and started xfce4 [via startx] and it worked as expected. Next I tried using xdm instead of kdm and YES, it works as expected. I was able to Restart or Shutdown (no asking for password, it just does it.) What is it about KDM that does not allow xfce4 to restart or shutdown?
My home computer is (of course) a multi-user system with my wife and I each having separate non-root accounts. Usually at the end of the day I exit X, drop down to the terminal, su to root and type
Code:
shutdown -h now
to turn the computer off for the night.
However, my wife doesn't know (or care to know) the root password, but she would like to be able to shutdown the computer.I tried making a /etc/shutdown.allow file, and typing
Code:
/sbin/shutdown -a -h now from her account, but it didn't work. I got an error that one has to be root to do that.
So, how do I allow regular users to shutdown?
Basically what is happening is i installed slackware 13 and then madwifi following these instructions [URL] and it works great, then i shutdown or restart and when i come back to linux i dont have the internet anymore. This happened twice already and i dont know how to fix it. by the way i have 2 hard drives, one with windows xp and one with linux. i dont think this would affect anything but i put it just in case.
i will try to install it again from scratch following those instructions exactly because i just went to the configure and make part, i will take the post down if it works after that but if this is up then it didnt work. i know i didnt provide any info on things like the output of iwconfig or the model of my network card (atheros something) but all i can say right now is that i use the latest version of madwifi, 0.9.4, the fixed one that works for the latest models of atheros.
Running 13.37. If I am in xfce, I have the option to shutdown or restart in addition to log off. In KDE I don't. how to get them to show up.
View 5 Replies View RelatedI've got a minor problem with my GPU: I replaced the OEM GeForce 6200 with a 9600 GT, but I believe the shutdown temperature is still set to the 6200's; causing annoyance with graphically intensive programs/games. It was a fairly small card, and has a low shutdown temp. BIOS revealed no settings, is there a setting for this in slack?
View 3 Replies View RelatedI just realized that my /tmp directory is not being cleared at shutdown time. How to enable this? I'm running -current.
View 8 Replies View RelatedI'm using Slackware 13.1 on my laptop, and sometime ago it make some beeps on shutdown, and when I don't find any word on a page on Firefox(using the find tool on Firefox).
View 2 Replies View RelatedWhat if I want to install Slackware for my parents so then I no longer have to get rid of virus and malware for them. Is there way so they never have to log on as root? Any way to access CD's and to shutdown computer? I only know how to do those things as root.
View 7 Replies View RelatedI have been looking for a lightweight bandwidth monitoring app and came across bmon. It does what I need. However it has an interesting way of exiting.
when it is running and you close it down it ask you 'Really quit (y/n)' and does not shut down. I am used to just right clicking on my desktop and selecting 'leave' when it comes to shutdown time.
A few times now the laptop hangs on shutdown if bmon is open. I guess it is due to the app asking if it should shutdown. Is there a way to disable the app asking or alternatively nuke it for sure with some script on shutdown.
I could search the relevant konsole running the app and go thru the steps to shut it down but sometimes I am in a hurry and it doesn't feel like the way to go anyhow?
Got tired of long waits for fsck on very large partitions.Here's a script to fsck selected partitions every 'N' shutdowns. No more boot delays for fsck (unless something is really wrong
Update1: On my system '/usr/libexec/gam_server' (gamin component used by xfce) prevented /home from being unmounted. I changed
Code:
[code]...
12.2 is up to date and am running the Firefox from Slackbuilds. There was an update to FF a few months ago. Since then FF "hangs" when I close it out. It does seem to shut down better from the home page instead of whatever site I happen to be on at the time of shutting down. I do have a few addons to FF but they were there before the update with no issues. The addons are Gmarks [disabled], Rankchecker, Scribefire, SEO for FF [disabled], SEO Toolbar, Weatherbug and Web Developer. I haven't done any "fixes" so I'm fairly certain I didn't create my own problem.
View 4 Replies View RelatedI upgraded to 13.1 and found the restart, shutdown buttons do not work. I have to resort to the terminal commands init 6, or poweroff. I then tried to install flash plugin. I modified the slackbuild script as per normal. Then issued the following command which seemed to succeed. But when I try to play utube movie it says flash is not installed. Do I need to rebuild the system?
Code:
root@redeemer:/tmp# installpkg flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz
Verifying package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz.
Installing package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz:
Package Description:
# flash-player-plugin (flash plugin for web browsers)
# Provides Adobe Flash plugin for browsers that recognize
# /usr/lib(64)/mozilla/plugins as a valid plugin directory
# Plugin is subject to Adobe terms of use:
# [URL]
# Plugin is subject to Adobe Flash EULA:
# [URL]
# Package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz installed.
Before i wiped windows (and the dual-booted slackware on it to make a slackware only hdd) i (sort of) backed up my files. I put something into my /etc/fstab that wiped /tmp/ when i shutdown/rebooted.
View 4 Replies View RelatedIt seems that I will get slackware working fine, just the way I want, and after I turned it off and turned it back on, Firefox and Pidgin refused to run because something was missing that was there before.
After uninstalling them both, and then realizing that the package was somehow uninstalled without me knowing, I reinstalled it in case anything else needed it. That was yesterday, and now today I woke up and started the computer, trying to use Konqueror. Strangely, there's no wireless internet, so I tried to use wicd and it just doesn't start. I try again from the terminal and I get this:
[Code]....
ImportError: /usr/lib/libdbus-glib-1.so.2: undefined symbol g_variant_new_double So I went and used slackpkg and it seems that libdbusmenu was uninstalled too. I really don't understand what's going on here. It's pretty annoying because without wicd I can't even use an ethernet connection, so the computer is basically useless to me at this point.
I have a question regarding runlevels, shutdown procedure and KDM. I am on a freshly installed Slackware64 13.37 multilib system. The default runlevel in /etc/inittab is set to 3: multiuser w/o X.
Now, I log in as root and issue the command:
Code:
As expected, KDM starts up, and I log in to KDE (or another WM/DE) as a normal users. When I am finished, I either issues
Code:
In Konsole or click on Shutdown in the KDE menu. The shutdown process is initiated, as expected, but then it stops, and a window alerts me, that there is a session open by user 'root'. If I click OK, the machine is finally shut down.
Now, if I interpret this correctly, the behaviour of Slackware64 13.37 has changed here, compared to 13.1. In previous versions, the root seesion was closed, when I changed the runlevel to 4 with the telinit command. Now, the session remains open, obviously.
My question is: Is this the correct behaviour, and isn't this a security whole? An unnoticed (!) open root session while I am surfing the web as an unprivileged user in KDE could be dangerous, I think...
Is it misconfiguration in my system, or is this the way it should be?
I have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
Recently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
when my pc boots and shuts down my monitor goes into 'input out of range' mode for a bit between the gui and the text only phases of boot/shutdown.is there a way to fix this? or where to start troubleshooting?also, when it shuts down it hangs after coming back to the text only part
View 4 Replies View RelatedI just happen to have a glitch with my newly rebuild slackware server. This morning everything was working fine. Then having recently setup raid arrays, I decided to try MrGoblin's rc.mdadm script to monitor the raid arrays.
I copied the rc script to rc.d & added lines in rc.local to start the script, and a line in rc.6 to stop the script when shutdown or reboot.
Now, I cant reboot neither I can shutdown...
If I issue the command "shutdown -r now", Slack execute the normal shutdown or reboot steps, unmount the local FS, turn off swap, remount the rootdev as readonly, and then I see:
Code:
Mdadm monitor not running:INIT: no more processes left in this runlevel & it stalls at this point forever...
Before the machine would have rebooted after this line. What could explain this? Now I have to hard power down or reset the machine, and of course, upon rebooting I get a REISERFS warning of unclean shutdown...
Content of the rc.local:
Code:
#!/bin/sh
#
# /etc/rc.d/rc.local: Local system initialization script.
#
# Put any local startup commands in here. Also, if you have
code....
I have just installed Slackware 13.1 32bit. My hardware is a P-4 3Ghz with a gig of ram. Intel on board graphic and sound.
This is the best implementation of Kde I have used so far. Slack 13.1 is amazing. The install went very well and everything we configured properly.
My problem is when I start Kde or try to shut dowm or logout I get the same error for knotify: Unable to use the Xine Multimedia Backend:Could not find plugin 'Xine' for application 'Knotify'
I get this same error with the application name at the end of it. If I open amarok I get the same error message with amarok at the end. If I try to click a misic file in dolphin same error message.
When I try to shut down or log out from menu I get the xine error and nothing happens. The only way I can log out is Ctrl+Alt+Backspace to get to the KDM log in screen and then I am able to shut down from the menu.
I have been looking on the forum and using google but have found nothing useful.
The error pops up when I try to play a cd or music on the hard drive.
I cannot locate shutdown log for Linux shutdown to check various activities carried out during shutdown. I can view Startup Log which is availble on console>Applications>System Tools>System Logs.
I have included Shutdown/Startup in dbora, so that Oracle 10gR2 Shutdown/Startup will be automated during OS Shutdown/Startup.
I want to check Shutdown log because Oracle Shutdown was not running, as from $ORACLE_HOME/shutdown.log contains no entries, where as startup log contains latest startup details.
That means here 2 issues are there. One, I want to locate OS Shutdown Log and the other being Why Oracle Shutdown not getting executed.
I cant shutdown without running sudo shutdown. When I try to use the default gnome shut down it takes me back to the logon screen. Fresh install today and I've had the same problem on other installs.
View 9 Replies View RelatedUbuntu will randomly pop up the shutdown menu and then shutdown.It seems to happen when im in firefox and typing and it has been difficult to replicate. I dont think it is a temp issue since watch sensors shows temmp of 40-50C. Someimtes it happens every minute someimtes i can go 10min without it happening.
Dell Inspiron 1525
ubuntu 10.04 (only os on system)
looking for a command that shutdown/reboot my ubuntu just same as process that happened when I press shutdown buttonIn fact I need to close all programs that are running and then PC shutdown (that happened when I press shutdown button).
View 9 Replies View Related