I'm having a problem compiling Blood Frontier on Slackware64-current. I believe this problem is also related to why I can't use make xconfig as well. Here is a bit of the error.
Code:
g++ -O2 -fPIC -Wall -fsigned-char -DINTERFACE -DIRC -Ishared -Iengine -Igame -Ienet/include -I/usr/X11R6/include `sdl-config --cflags` -o shared/cube.h.gch.tmp shared/cube.h
[code]....
Trying to get Midori browser from SBOpkg's and one of the dependencies is libsoup.configure: error: GLIB 2.21.3 or later is required to build libsoup.Anyone able to give me a pointer in the right direction to overcome this.
View 2 Replies View RelatedI am very happy to announce that today I succeeded to install full Slackware ARM on the pandaboard: URL...I did the following:
* sd with 2 partitions, one (vfat) for bootloaders (MLO, u-boot.bin) and uImage and the other one (ext2) for minirootfs
* copy xloader (MLO), uboot and uImage from Angstrom distro on the first partition
* copy Slackware ARM minirootfs on the second partition with Angstrom modules in the usual path (/lib/modules/...)
* boot in ARMedslack
* install all the others packages via NFS
I had to make some changes to configuration files as indicated here:URL...The next step is to build a kernel and modules for omap4 by myself and use them instead of the Angstrom ones.One question: is there any kind of package manager, such as slap-get, sbopkg, etc. for Slackware ARM? If not, can I use the SlackBuilds from slackbuilds.org? How to modify them?
I em trying to compile fop-1.0 on Slackware64 13.1. I have ant 1.8.1 Slackware package.
Here is the output of ant build:
Code:
I'm trying to install squidGuard-1.4, I have a minimal install. I have installed squid-3.2.0.5 without any problems, but squidGuard is driving me crazy
I can run the ./configure with no problems but when I run make, or make install I keep getting this error:
Code:
make: *** [y.tab.c] Error 141
And that is is all, no more verbosity or anything else.
Error suggests that YACC is missing but bison is present, also db4 (tried with db44 and db3, same story).
Just in case you can see anything I cannot I've attached the config.log
Anyone know of the simple (!) command syntax to : a) download the full SQF tree from [URl].. b) maintain that tree WITHOUT having to download the whole dang thing again.
I'm 100% certain this is possible - that's exactly what source-code repository tools like subversion and git are supposed to do. But Git is complex and that site doesn't seem to have an obvious (to me) method of doing part b)
I was very happy to see that dzen2 is now available on SlackBuilds.org because now I can use XMonad to its fullest. Unfortunately, sbopkg is not able to download the source code for dzen2. This is probably because the source is hosted on Google Code, which requires the user to click a second download link for some reason. I downloaded the source and the SlackBuild manually and installed dzen2 that way, and that worked perfectly, but I would really prefer to have sbopkg manage updates for me. Is there any way I could get this working? Perhaps I could just download the source manually, place it in the appropriate directory, and let sbopkg build it and manage updates, but I don't know which directory the source would go in or if this would even work.
Here is the link to the SlackBuilds.org page for dzen2: [URL]
The default sourceforge mirror selected by wget or sbopkg is too slow for me. How do i set a different mirror permanently?
View 3 Replies View RelatedI tried to recompile php with support for oracle extensions oci8.so. Got the source and slackbuild script from slackware repo and just add the following line to the slackbuild script. "--with-oci8=shared,instantclient,/opt/instantclient_11_2". I use instant client from oracle Version 11.2.0.2.0 from this page
After I run the script I got this error message
Code:
/bin/sh /tmp/php-5.3.6/libtool --silent --preserve-dup-deps --mode=compile gcc -I/tmp/php-5.3.6/ext/fileinfo/libmagic -Iext/fileinfo/ -I/tmp/php-5.3.6/ext/fileinfo/ -DPHP_ATOM_INC -I/tmp/php-5.3.6/include -I/tmp/php-5.3.6/main -I/tmp/php-5.3.6 -I/tmp/php-5.3.6/ext/date/lib -I/tmp/php-5.3.6/ext/ereg/regex -I/usr/include/libxml2 -I/usr/include/enchant -I/usr/include/freetype2 -
code....
I'm trying to compile virtualbox 3.2.10 con slackware current 32bit through sbopkg
I get this error (I'll copy only the end part)
Code:
CXX VMMR3 - {C}/src/VBox/VMM/VMMAll/TMAllCpu.cpp
cc1plus: warnings being treated as errors
In file included from /tmp/SBo/VirtualBox-3.2.10_OSE/src/VBox/VMM/VMMAll/PGMAll.cpp:236:0:
[Code].....
Just a question out of curiosity: Is there a build-queue that can be used with sbopkg to build a complete Slackware repository from scratch?Just asking, because the 32 bit version of Slackware is suited to run on older computers by compiling for i486 architecture. I want to know if it is possible to rebuild the complete repository with optimizations for newer architectures, so that the programs can make use of the features of newer processors, like MMX, SSE and so on.
View 7 Replies View RelatedI have a doubt wrt to installing "Q" files . I have cloned a repo from git ..Yesterday I tried to install Libre office using sbopkg..It began with the download and gave an error asking me to retry/abort or continue with the build due to some missing package..I presently have a folder "queues" in /var/lib/sbopkg..I also downloaded another repo and placed it another folder. The problem is that in SBOpkg it is picking up only from the queue folder in /var/lib/SBOpkg/Queues. I dont know how to point to the other folder in /home/downloads/queues/ (the second repo)..I thought of trying this as neither slackbuild or the first repo is working for installing libre office..The internet connectivity is ok!
View 5 Replies View RelatedCode:
Building flash-player-plugin
flash-player-plugin:
flash-player-plugin not found in /var/cache/sbopkg.
--2011-05-22 10:36:40-- http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_10_linux.tar.gz
Resolving fpdownload.macromedia.com (fpdownload.macromedia.com)... 95.100.2.70
[Code]...
I tried three times, by removing /var/cache/sbopkg/install_flash_player_10_linux.tar.gz then start sbopkg again.
EDIT: I went to slackbuilds.org, downloaded flashplayer from there, and checked the md5sum. Still the same of course.
I am really enjoying recently slackware. Using slackpkg and sbopkg it is so easy to keep slackware running current. Sometimes I feel like a master of Linux, which is absolutely no true. Apart of some objectives I have regarding slackware's philosophy, I have this question please. I have about 8 packages installed via sbopkg. my question.
1)Is there a way to keep these packages updated via a program? (If not I guess I am obliged to check manually for each of them.) 2) Also, sometimes when we build a package via sbopkg it is necessary to build other packages. Is there an option to install via sbopkg and the package and its dependencies required through just one command?
Sbopkg 0.32.0 doesn't find slackbuilds 13.1 repository even though I have modified the sbopkg.conf. Is there going to be an updated sbopkg in the near future?
View 5 Replies View RelatedBeen trying to get Enlightenment to install on my 13.37 multilib. Used sbo to install most of the libraries (ecore needed the LDFLAGS="-L/usr/lib${LIBDIRSUFFIX}" fix so I manually did that). All installed correctly. Then started enlightenment itself in sbopkg. It did the 'file in wrong format' thing, so I manually dled the slackbuild, added the LDFLAGS line, and ran it. It produced this error, and I have no idea what its telling me.
Code:
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc -std=gnu99 object... ok
[Code]...
I recently upgraded my -current box, and now when I try to run sbopkg I get the exact error described in the following thread:[URL].. The error fwiw is as follows:
root@catbutt:~# sbopkg
ERROR
sbopkg: Invalid repository descriptor
Line
SBo 13.0 "SBo repository for Slackware 13.0" _SBo rsync slackbuilds.org::slackbuilds/13.0 GPG
of
/etc/sbopkg/repos.d/40-sbo.repo
specifies an unknown fetching tool (rsync).
seems likely given the discussion in that previous thread that the bash upgrade (to 4.1.002) in the recent -current onslaught is responsible?
I'm doing a bit of housekeeping and tidying up of programs I no longer need/use, and as some of these were installed using sbopkg I thought I would also tidy those. However when attempting to view obsolete sources via the utilities sub-menu, sbopkg seems to crash to a cli interface from the ncurses one and spews continuously the error below. This thern continues until I CTRL+C the process which of course then leaves the sbopkg pid file still showing active in /var/run. Anyone else come across this, and a possible way to prevent it.
/usr/sbin/sbopkg: cannot make pipe for command substitution: Too many open files
stty: standard input: Bad file descriptor
/usr/sbin/sbopkg: line 569: read: read error: 0: Bad file descriptor
stty: standard input: Bad file descriptor
/usr/sbin/sbopkg: redirection error: cannot duplicate fd: Too many open files
How users to install the latest svn versions of x264, ffmpeg and mplayer. Primarily, this is important for users who rip movies from dvds.
How do I perform the same tasks using sbopkg? I believe some compilation options must be changed to reflect the svn changes.
Has anyone done this before? Are the steps important when using slackware 13 x86_64?
Is that 'normal' for the sbopkg install of Wine?
View 6 Replies View RelatedWhen I do #./pdfedit.SlackBuil I get the information in the terminal:
[Code]...
Whether we want to checking PDFedit prepare-core-dev package ... yes Whether we want to checking build PDFedit gui ... yes configure: error: QTDIR environment variable must Be Set
I am currently running slackware 12.2 on a 25 GB partition. I like to use slackbuilds, but when I try to compile larger tarballs (like abiword, or a patched version of Ghostscript as I did today) I receive an error-message: 'Not enough space left on device'. I think the size of the partition must be big enough (I never got this message when compiling with Linux From Scratch). I think it has something to do with the size of my /tmp directory, but I don't know how to fix this. Is there a way to solve the problem, so that I could be able to use slackbuild-scripts?
View 4 Replies View RelatedI know this is niche application, so I don't have high hopes of a solution, but I'm throwing it out there anyway. My Wife is diabetic and uses the One Touch Ultra Mini to test her blood sugar. We keep track of it on paper but her new endocrinologist insists we MUST bring the meter at each visit so they can hook it up to their computer and pull the numbers from it. I want the doctor to have more than just the readings, though I can't force her to look at anything else, because we not only track the readings themselves, but diet, exercise, medications, etc. so I want to pull the readings from the meter myself and add the other relevant information, then submit that to the doctor.
The "kit" includes the cable and windows software. They do not support anything but windows, not even mac. In fact, they don't even list Windows 7 as a supported OS, so I don't expect them to begin supporting any other OS any time soon. I'd like to know if anyone has been able to connect one of these meters to a Linux box and get any data from it. Raw data is fine as long as it can be determined what's what. I have XP running in a VM, so I can probably make that work, but I'd really like to be able to use the meter in Ubuntu.
I have a need to recompile mesa. The --enable-32-bit option falls over every header and basic 32 bit lib, and won't compile. But if I try to install 32 bit packages, I could slap a 32 bit binary straight on top of my 64 bit one. What's the accepted way of doing this? I can't seem to find a package in Slackware 13.0
View 9 Replies View Relatedi try to compile freej on slackware 13.1 the problem is with ffmpeg >= 0.6 i have this error
Quote:
In file included from /usr/include/libavutil/avutil.h:81,
from /usr/include/ffmpeg/avcodec.h:30,
from ../src/include/video_layer.h:22,
from ../src/include/impl_layers.h:48,
[code]....
I've installed glibc and downloaded 2.6.33.3 tar ball from kernel.org.
I created a symlink /usr/src/linux -> /drive/linux-2.6.33.3
But there's something missing because when I run
make mrproper
make config
I get errors about not finding headers:
asm/socket.h
It seems like I am missing some other symlink, I've tried creating other links, like /usr/include/asm -> /drive/linux-2.6.33.3/arch/x86/asm
I'm running 13.1 64bit with alienbob's multilib extension and want to add openmotif. I used Eric's Slackbuild from [URL] applying it to openmotif-2.3.3 and succeeded in compiling the 64bit-version.Next I tried to compile in 32bit-mode, following alienbob instructions:
move lib64 to lib in openmotif.Slackbuild
export ARCH=x86_64
. /etc/profile.d/32dev.sh
./openmotif.Slackbuild
linking stops with error-message
Quote:
/usr/lib64/gcc/x86_64-slackware-linux/4.4.4/../../../../lib/crt1.o: In function `_start':
/glibc-tmp-88b9835d8519e3638ef4d116a6932cb2/glibc-2.11.1/csu/../sysdeps/i386/elf/start.S:115: undefined reference to `main'
collect2: ld returned 1 exit status
Specifically, where does /usr/lib64/gcc/ come from?
Having trouble compiling the regular par2cmdline-0.4, I stumbled upon [URL] modified version of par2cmdline-0.4 with tbb which allows for concurrent processing of files. I have tried compiling this with no luck on my system and was wondering if anyone has had any luck. The ./configure goes through fine, and tbb is detected and used however it craps out just moments after issuing the make command. I have tried both tbb 2.2 and 3.0, but to no avail.
View 6 Replies View RelatedCode:
putty-0.60/unix$ make -f Makefile.gtk
cc -O2 -Wall -Werror -g -I.././ -I../charset/ -I../windows/ -I../unix/ -I../mac/ -I../macosx/ `gtk-config --cflags` -D _FILE_OFFSET_BITS=64 -c ../be_all_s.c
cc -O2 -Wall -Werror -g -I.././ -I../charset/ -I../windows/ -I../unix/ -I../mac/ -I../macosx/ `gtk-config --cflags` -D _FILE_OFFSET_BITS=64 -c ../cmdline.c
[code]....
I'm compiling the BlueZ packages on Slackware64-13.0 and bluez.Slackbuild failed to run. I added
Code:
mkdir -p $PKG/lib/udev
immediately before
Code:
cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1
and now the script runs.I don't know why the /lib/udev directory isn't created earlier in the build process for me, but now it builds cleanly.