I`m looking for solution. Is it possible to run process on 1 core in UNIX ? From time to time I must start some very CPU consuming process and unfortunately this process is running on all cores... so at this time working on PC is very hard.
View 3 Replies
Unix command that allows to know which process is running on processor core?
View 2 Replies View RelatedAssume someone bind a particular process to a particular CPU core(In multi core machine) by using sched_setaffinity() like functions. Then how we can get that process running core id and CPU core utilisation of that process on that running CPU core(Pragmatically or by a Linux command)?.
View 5 Replies View RelatedPossible Duplicate:
Linux: Is there something similar to "top" for I/O?
I am trying to do some CPU intensive operation on a Linux machine and it is showing very high load.
I want to figure out if this load is due to I/O or CPU usage. How could I get the percentage of I/O usage by process?
what is the best/accurate way to get the process id in java code in order to write to the log file. To be specific: I am using avalon logkit for logging. I really cannot find a way to write the process id to each line in the log.
View 1 Replies View RelatedAt the unix command line if i press Ctrl-C,that does not end a process but rather interrupts it and i return to the shell prompt. So,i have the following two questions:1.Is there a way i can see the list of all interrupted processes and end them ?2.What key combination to press to end a process instead of interrupting it ?
View 7 Replies View RelatedTo see if an application is using all the cores in a system, I wanted to identify which process is running on a core at a given time. Is there any way to get that information?
View 3 Replies View RelatedHow can we run the linux process like tar on multiple core? For example if we want to build the kernel we can use -j4 to distribute process of 4 different core. Is it possible to run long time consuming process on mulitple core?
View 1 Replies View RelatedMy system has Intel Xeon 4-core cpu(hyperthreading 8-core) and run 64-bit linux. I want to allocate one core for general process(kernel process & other processes). And then, I want to allocate the rest of core for the specific multi-thread program.
Q1: I know that I can pthread_setaffinity() for user-mode thread and mpstat for monitoring. So, how can I allocate a core for kernel process and monitor it?
Q2: How can I restrict use of the cores for the multi-thread program? I don't want kernel process to use the cores for the multi-thread program.
In my program, I fork() to get a child process. Because of some problem, child process terminates by a segmentation fault. Parent process is still running. I have compiled my code with -g option. I have done: ulimit -c unlimited. I am not getting core dump of the child process. How can I get the core dump of child process?
View 1 Replies View RelatedA process from some software I am running keeps crashing with seemingly no real pattern. I ahve tried using ddd/gdb to run the process in question but everytime it crashes no useful information is returned. I also tried getting a core file with the same result. It seems as though according to linux the program has exited normally.
This obviously points towards the process itself having a bug but there are other instances of the same program running on other machines in the network with no problems at all.
I have made comaprisons of hardware/drivers (lspci etc) installed on various machines and all are exactly the same as the machine in question so my question is (at long last): What else should I be looking for?
Is there any way to monitor one process' CPU usage and RAM usage over time on Linux? I am trying to change to a cheaper VPS and need to work out what level of CPU and RAM I need!
View 2 Replies View Relatedi want a process that can operate as both a TCP echo server and a UDP echo server. The process can provide service to many clients at the same time, but involves a single process that does not start up any other threads.
View 3 Replies View RelatedI will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.
View 1 Replies View RelatedWe're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
I would like to run my own server, and I'm thinking of buying a dedicated machine to run it on. I checked out the dell website for a cheap machine to run it on (I don't need high performance - just a personal file server running a few hard drives, and a web/mail server). I noticed that they have some cheap models in their server line that are as cheap as a desktop. Compare:
[URL]
The main difference I see between the desktops and the servers is the use of the Core or Xeon processor, and also, the servers tend to have lower RAM.if I am looking for value, should I opt for a low end desktop or a low end server to run a personal server? Also, what advantage does the Xeon processors and Dell server line have over the desktop models that make it better for running a server?
I am installing RHEL 5.5 to be a syslog server to collects logs from servers (HP-UX, Linux, Windows and Cisco Network Devices). and i can now collect logs from my windows PC on syslog linux server by using Datagram SyslogAgent software. can collect logs from HP-UX 11.23 server. and i configuring the Unix server as in the steps below:
1. Log in as root
2. Go to /etc/syslog.conf
3. Add a line: *.*<tab>@<Sentinel Server IP Address>
*.* @10.15.1.5
4. Save and Close
# netstat -na | grep 514
tcp 0 0 *.514 *.* LISTEN
udp 0 0 *.514 *.*
[code]....
Anyway i have a very old Mandrake server where a previous owner hosted mailboxes on. This server is getting very slow and does alot of e-mail related tasks like:popsmtpmxIt runs on sendmail (which is also very outdated...) and it doesnt seem to respond to its config files. And the whole smtp and mx thing leaves us with some really weird mail problems...So i want to implement it in our current mail setup in which i have it all on seperate servers:2 smtp server (dns roundrobbing) (postfix)4 mx servers (1 etrn) (postfix)1 webmail server (v-webmail) (just apache and connects to the pop/imap server)And 1 pop/imap server (postfix, dovecot)I also want to implement smtp authentication because of all the mobile clients i have to host... This is where it gets tricky.
I want to export the unix user table of the old mandrake server and import that into a mysql database. This database will be used to authenticate the smtp users.I also want the export of the unix users to import it to the other pop/imap server so users can logon to that server instead of the crappy Mandrake server.I would expect that the export from unux users to mysql (including passwords) is the hardest part. I googled it, but some of the stuff i found didnt seem to be very reliable, so thats where you guys kick in :-). So is this possible? If so, how can i do it?I know i should go with some kind of ldap situation but that seems a way bigger hassle then this setup.
i am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.
View 6 Replies View RelatedI just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).
I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?
Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0
[Code].....
Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?
View 3 Replies View RelatedIs there any Linux API that will let me control on what core will a thread run? If not, do I have to use assembly language?
View 2 Replies View RelatedI just got SSH access to my shared hosting server (unix). I am current in a directory on the server where there is a file called images.zip. I want to download this to my desktop (I am running windows locally if that matters). Which command do I need and what is the syntax?
View 8 Replies View Related1)We need to do a clean up a folder in a remote unix server . What is the best option to connect to remote server? how do we use ssh ? Is there any prerequisite to use ssh?
2) We have to SCP few files to another folder in a remote unix server . I formed the below command to use in script. Is it of correct usage? scp -r $POS_HOME/posctl [login nameip address:/home/username/directory]
I have seen public key/private key generation part for SCP. How do we handle this? Does this need to be done as unix admin?
I want to write a shell script which will copy files from user Mac machine to UNIX Server without prompting userID and Password. I do not want to use ssh or rcp commands as it prompts for password.
View 5 Replies View Relatedi want to know how to connect it to debian,fedora, mandriva, puppy (or any other distro thats independant and most software needs to be installed with tarballs)and i also want to learn to connect to it with mac os x, and solaris (open solaris)
View 10 Replies View RelatedI'm using postfix with unix accounts for a while now and I just realized today that SASL authentication, instead of working only with the USERNAME, it also works if the username is followed by ANYDOMAIN.COM
So, let's say I have the following UNIX users: tim, mike, john. If I set the Outgoing Username:[URL]..(where whatever.com can be any name you can think of) IT WORKS, even though it shouldn't, it should only work with tim, mike and john without any domain name. Does anyone know what might cause this and what's the workaround to this problem?
I am implementing BigFix tool, for UNIX I need help to create script for installation of BigFix client on *nix systems. I am thinking to install BigFix using a script which will install correct version of BigFix client, is there any script available or what i need to do create a script for this taskOr Is there any Open source tool available to installation of this kind of thing on *nix?
View 1 Replies View Related
