Server :: Mount Ext3 File System With Direct I/o?
Jun 22, 2010how to mount ext3 file system with direct i/o.on AIX has dio mount option to use direct i/o and solaris too.
View 2 Replies
ADVERTISEMENT
General :: Mount A File System (/dev/sdb) As Ext3 (rw,acl,user_xattr)?
Jul 15, 2009I'm trying to mount a second hard drive as a ext3 (rw_acl,user_xattr). I type the ff.:
# mkfs.ext3 -c /dev/sdb1(it seems to create a file system from this 2nd HD)
then type:
# mount -v /dev/sdb1 / type ext3 (it seems to mount it)
But when I check the ext3 systems with typing:
# mount -t ext3 (to check the list of ext3 devices, it gives me this)
/dev/sda1 on / type ext3 (rw,acl,user_xattr)
/dev/sda2 on /home type ext3 (rw,acl,user_xattr)
/dev/sdb1 on / type ext3 (rw)
How can I make /dev/sdb1 on type ext3 as (rw,acl,user_xattr) as the others?
Ubuntu :: Sh:grub - Root Mount File System Failed ... Ext2 Ext3 Ext4
Mar 27, 2010I have dual boot system..i.e, windows XP and ubuntu 9.10(insatlled side by side). when i try to boot ubuntu, Im gettin sh:grub > prompt
[Code]...
I am getting something like this.. root mount file system failed.. ext2 ext3 ext4 ....... kernel panic message and hanged at kenelthreadhelpper+ what can i do.. I cant reinstall ubuntu again.. Because I have installed nany application there..
Server :: Data Recovery - File System EXT3
Sep 30, 2009I have lost the data of my drive having file system ext3, please tell me the most reliable softwares for data recovery, please try to tell also GUI software.
View 1 Replies View RelatedServer :: Dynamically Grow The Ext3 File System In CentOs?
Nov 3, 2010I have configured a "Syslog" server on /var directory as a separate ext3 partition - to receive the logs and events from the clients & the firewall as well. The directory needs to grow dynamically as the logs are populated. Is there a way i can make the filesystem grow dynamically as and when the directory is full.
View 6 Replies View RelatedServer :: Mounting Ext3 File System As Ext2 On Slackware With Custom Build Kernel?
May 16, 2010I just rebuild the kernel for slackware 13, everything works, but root file system which is ext3 is mounted as ext2. Normally I've build ext3, ext4 and so on as modules, not in the kernel... but if I do this, then the kernel mounts the file system as ext2, which is build in the kernel. I also modified rc.modules so I can make sure that ext3,ext4,jbd are loaded, but it doesnt work.
View 2 Replies View RelatedServer :: Unable To Mount NFS File System?
Jun 22, 2010When i boot my node-machines they are stuck in (initramfs) after showing the following error:
Gave up waiting for root devices.Common problems:
- Boot args (cat /proc/cmdline)
- Check root delay (did the system wait long enough)
[code]...
General :: Recover A Deleted File Using The Ext3 File System?
Jan 10, 2011I used the ext3 format when I formatted my partition prior to installing Ubuntu10.10. I had accidentally deleted a file and began the process to get it back. It wasn't critical but helpful to recover the file. To make a long story short I ran into to some unexpected road blocks. I tried to use PhotoRec to get the job done but with no success.
I'm just looking down the road in the event I might have to recover something important.If it would be better going back to the Fat32 file system I would rather do it sooner than later. Just as a side note I am dual booting between linux and windows.
Fedora :: Fstab Ext3 F11 - Automatically Mount The Drive In File Tree At The Location /mnt/TheDrive?
May 15, 2010With a 1Tb USB drive plugged in, we'll call it "TheDrive", I boot my machine and "TheDrive" is mounted automatically. The icon is on the desk-top. "TheDrive" mounts to /media/TheDrive. Everything is fine. But, I would like to automatically mount the drive in my file tree at the location /mnt/TheDrive. I would not like to have the drive automatically mounted to /media/ and appear on the desktop. I know that this requires the use of fstab; but, I do not know what to add to this file.
[Code]...
Fedora :: Formatting Ext3 File System
Oct 25, 2009How would I format my partition into a ext3 file system?
View 1 Replies View RelatedUbuntu :: Corrupted EXT3 File System?
Feb 9, 2011I am using Ubuntu since release 8.10, but it is first time when i can`t solve problem
when i tried to create new NTFS partition on unallocated disk space with Paragon Partition Manager (damn, that was stupid). Process was aborted with error (later i finally made it with Gparted without problems)
After reboot mine Ubuntu say:
Code:
Errors were found while checking the disk drive for /
Press F to attempt to fix errors, I to ignore, S to skip mounting or M for manual recovery. I pressed "F" but that had help only for a boot and doesn`t really fix error :`(
Later i booted from liveCD and had checked partition (/dev/sdb1; file system - ext3) with gparted (result - aborted fixing process with error) Now i can`t even boot from that partition and even mount it from other linux system.
mine fdisk -l
Code:
/dev/sdb1 * 1 5957 47849568 83 Linux - problematic partition (unmountable)
/dev/sdb2 5958 29983 192988845 7 HPFS/NTFS
[Code]....
PhotoRec recover most of my files, but i need complete partition.
Fedora :: Evaluate The Ext3 File System Performance
Apr 13, 2010I need evaluate the ext3 file system performance; i need define:
- services provided
- parameters and
- the performance with different parameter values; for example, changin the value of the "data" parameter (journal, ordered, writeback).
I do not know what services ext3 provides. Well, i know intuitively that it provides services to read, write and erase files. But, there are anything more?. Where can i find the API?. Is the ext3 file system POSIX compliant?
Hardware :: Data Recovery On HDD - EXT3 File System
Aug 29, 2009I accidentally formatted a HDD when I meant to format a USB thumb drive. The HDD is a 250GB drive that had about 180GB of data in the EXT3 format. I was actually attempting to make a bootable USB thumb drive with TRK (Trinity Rescue Kit). Kind of funny/ironic to mess up a drive while trying to make a rescue disk. Anyway, as soon as I realized what had happened, I pulled the drive out of the computer to make sure I didn't do anything else stupid to it. I have been searching for some way to recover and haven't really found much. There are a lot of programs to get Windows data back, but I haven't seen anything specific on the EXT3 file system.
View 4 Replies View RelatedGeneral :: Recover Data From Ext3 File System?
Jun 20, 2009I have accidentally removed vmware virtual disk, my host operating system is RHEL5.2 with ext3 file system, i have used photorec, magicresue and foremost but still no luck to recover the vmdk file. i have seen in foremost configuration file that there are some predefined files (ex- doc, pdf, jpg, avi, zip, etc),
1. is there any way to add vmdk file extension on that configuration file?
2. if yes how can i do ?
3. by adding vmdk on configuration file, can i specifically use recover option for vmdk?
CentOS 5 :: Which File System Use 5.6 By Default Ext3 Or Ext4
Aug 29, 2011Which file system uses Centos 5.6 by default, Ext3 or Ext4? I have installed on Ext3, it's upgrade from 5.5, but howto convert into Ext4 without damage or lost data?
View 3 Replies View RelatedFedora Security :: Encrypt Ext3 / Ext4 File System?
Jan 6, 2011I want encrypt my fedora file system.
How to i can encrypt ext3 or ext4 file system.
General :: Stuck Choosing Between Ext4 And Ext3 For The File System?
Jul 7, 2011I was in the process of installing Ubuntu 11.10, but got stuck choosing which file system to use. ext3 and ext4; which is better for a personal desktop? If ext4 is better, will it work well on my old PC (bought 3 years ago), or perhaps ext4 is not actually compatible with an old hard disk?
View 4 Replies View RelatedUbuntu :: Locate An Ext2 Or Ext3 File System By Using The Terminal?
Nov 13, 2010how can i locate an Ext2 or Ext3 file system by using the terminal?
View 2 Replies View RelatedGeneral :: Ext3 File System Is Remounted With Readonly Access?
Sep 29, 2010I am using linux kernel 2.6.10 after some time one of the file system is becoming read only. Here is the kernel dump
Freeing unused kernel memory: 160k init
kjournald starting. Commit interval 5 seconds
EXT3-fs warning (device hda1): ext3_clear_journal_err: Filesystem error recorded from previous mount: IO failure
[code]....
General :: Mounting An Ext3 File System Destroys Superblocks?
Jun 27, 2010I have an image of an ext3 file system done with dd. I know that the file system is corrupted but I want to try to recover some files. Whatever I dd it again to the original partition or assign the dd image to a loop device, that's what happens:
- dumpe2fs -h gives me a valid ext3 superblock.
- as I try to mount the device read only, it fails with a bad magic number error.
- executing dumpe2fs -h again gives bad magic number error.
- trying debugfs or fsck with backup superblocks fails the same way.
For me it seems that in spite of mounting the device as read-only, mount command do something wrong with the superblock as before the mount the superblock is correct and it's there.
Ubuntu :: Which Command Should Run From The Terminal To Know Which File System (ext3 - Ext4) Runs On
Dec 27, 2010I'd like to know which command i should run from the terminal to know which file system (ext3, ext4, etc...) my Ubuntu runs on.
View 2 Replies View RelatedUbuntu :: Mounting A Device If Don't Know The File System Type (e.g Ext3, NTFS)?
Jan 14, 2011How do I go about mounting a device if I don't know the file system type (e.g ext3, NTFS)?
View 4 Replies View RelatedGeneral :: Restore Files From An Ext3 File System Formatted With NTFS?
Oct 1, 2009There were some files residing on my ext3 file system, using Ubuntu as my linux distribution. Yesterday I formatted the hard drive using a windows install CD, rewriting it with a new NTFS partition. I'm willing to restore my personal files deleted due to this format.
View 3 Replies View RelatedHardware :: Change My External Hard Drive's File System From Ext3 To Fat32?
Feb 9, 2010i needed to change my external hard drive's file system from ext3 to fat32, to use it in windows, which i did the simple way: i shrunk the ext3 partition, made a fat32 partition, copied the files over, removed the ext3 and made the fat32 bigger. unfortunately, while gparted was making the partition larger, my computer shut down. i lost all my files and the partition messed up immediately. i made a new fat32 partition, after deleting the old one, but noticed that gparted was showing 100 gigs already in use (???). so now i have a 300 gb hard drive with only 200 gb i can use; i ran df to make sure gparted wasn't messing up, but indeed it shows the partition as being only 200 gigs in size. i haven't tried making any other kind of partition yet, such as ext3, for fear of losing my files again, and because it wouldn't be permanent anyway, because i need those files in windows and stupid microsoft won't make their OS ext3 compatible.
View 2 Replies View RelatedGeneral :: Ext4 New File System Mounting Compatibility With The Older Ext3 Type?
Sep 7, 2009How well is the ext4 new file system mounting compatibility with the older ext3 previous Linux installations ? I refer to Ubuntu 9.04 and the new Fedora 11 which have the option to install with the ext4 file format. Will it be better if I install with the older ext3, so that I will be able to mount all other Linux from each other in a multi-boot system ?
View 6 Replies View RelatedSoftware :: Mount Error: Can't Mount An Encrypted Volume With An Overlaying Ext3 FS
Jun 6, 2010I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type
fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running:
mdadm --zero-superblock /dev/sda6
mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf
mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module
[root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4
Enter passphrase:
Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume: mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
Now, I unmount the volume
cd ~
Code:
umount /ftdata
cryptsetup remove ftdata
And now, if I try to setup my encrypted volume like this:
Code:
[root@localhost ~]# cryptsetup create ftdata /dev/md4
Enter passphrase:
mount -O noatime /dev/mapper/ftdata /ftdata
I get this error:
mount: you must specify the filesystem type
[Code].....
CentOS 5 :: Mount Error: Can't Mount An Encrypted Volume With An Overlaying Ext3 FS
Jun 6, 2010I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running: mdadm --zero-superblock /dev/sda6 mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module [root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4 Enter passphrase: Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume:
mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
[Code]....
So why is it that I can't mount my encrypted volume after the first time? I am giving the correct password when it asks to.
OpenSUSE Network :: Nfs Server On 11.2 - Mount.nfs: Mount System Call Failed
Apr 29, 2010I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
General :: Read .gz File Direct On Shell/terminal Without Decompressing The File?
Dec 9, 2008How can I read .gz file direct on shell/terminal without decompressing the file?
satimis
Ubuntu :: How To Mount An Ext3
Apr 27, 2010I have a Western Digital World edition II network HDD, but somehow I have lost the Media folder..I have also read http://foremost.sourceforge.net/ is a very great recovery tool in ubuntu, is this true?So I have pull out the HD from the western digital NAS case and put it into a USB enclosure.Anyone can teach me how to mount this driver?To look for device boot namesudo fdisk -lBut how to look for the mount_point_dir?sudo mount /dev/sdc4 [mount_point_dir] -t ext3
View 9 Replies View Related