Server :: Reducing The Size Of A Device In An Existing RAID Set?
Sep 9, 2009
Alternate Heading: Unable to use opensuse partitioner to fully format a Seagate 1Tb drive OK. Swapped over a motherboard to increase the number of slots available for hard drives so that I could expand my raid array (4 X 1Tb drives). Discovered I had no thermal paste so all delayed for 24 hours while I bought some, miscalculated on rebuild and had to reinstall OpenSuse but in the end system is now up and running. Unfortunately when I formatted my new 1Tb drive (Seagate) it formats to 931.50 Gb while the other 4 drives formatted to 931.51 Gb (they are WD). I'm now in the position that when I try to add this new drive I get :
mdadm: /dev/sdc1 not large enough to join array
Is there any way I can resize the existing devices down to 931.50 Gb so that I can add in the new drive without having to restore the array?
View 4 Replies
ADVERTISEMENT
Jun 15, 2011
I have installed Fedora 15 on my laptop a couple of days ago, but now i want to install windows next to it.To do this i have to resize the lvm partition.But at the final step (vgreduce) i get this message:Physical volume "/dev/sda2" still in use.What now? Can someone help me reducing the size of my lvm partition?
View 3 Replies
View Related
Feb 11, 2010
I have an install of Fedora 12 and I would like to know how to reduce the size of the /var/log/messages file.You see that file is already 120MB large and about 4 days old.I would like to be able to either make a new file daily or adjust a maximum size
View 8 Replies
View Related
Nov 16, 2010
Ok chaps, what do I need similar to Irfan View on T'other OS (hiss) to edit the Size of Photo's, friends tend to get miffed if I email 5MB Pic's. Loads of viewers etc on Ubuntu, like Playing Hopscotch in a Minefield, can give you a really Crap Day!
View 3 Replies
View Related
Feb 9, 2011
Currently I have 3 hard drives
2pcs 10gb almost the same
1pc 20gb
I have a layout of
(10.2gb)
/dev/hda1 boot 104391 83 Linux
/dev/hda2 9912105 8e Linux LVM
(10.1gb)
/dev/hdb1 9873328+ 8e Linux LVM
(20.4gb)
(unpartitioned)
The two 10g is setup as lvm and I want to make raid1 using the 20gb hdd. Almost all I see is raid1 first in the internet.
View 11 Replies
View Related
Jan 14, 2011
I've spent hours trying to scan + shrink a multipage PDF documentlosing readability. This is the first time I've ever needed to do this! (I had to scan each page as ".jpg" in order to email and open on another computer, so I could not scan to PDF directly, which I think is why each page was so large; lower DPIs made the text too blurry.)I found this great tip on UbuntuGeek...but anyone can do this if GhostScript is installed:
View 1 Replies
View Related
Apr 24, 2009
I have a system that has the following partitions:
Now SDC is a new drive I added. I would like to pool that new drive with the raided drives to give myself more space on my existing system (and structure). Is this possible since my raid already has data on it?
View 1 Replies
View Related
Apr 20, 2011
I have a RAID5 with 5x2TB HD's and I'm planning a major hardware overhaul. My server currently runs on a Pentium4 3.2 Ghz (pre multicore technology) on a SuperMicro mobo. I'm planning to switch to an AMD Phenom II X6 1100T Black Edition Thuban 3.3GHz, 3.7GHz Turbo 6.
So here's the question. Can I just plug my drives to the new board and restart the RAID like nothing happened? I don't have space to backup all my data if I have to recreate the RAID from scratch. Intel and AMD should be binary compatible (I mean the RPM's work) so I should be able to invoke mdadm to assemble the RAID after I install Linux on the new server. Right?
View 3 Replies
View Related
Mar 9, 2011
We have been using Ubuntu Server at our department since several months now. It hosts a website, e-mail and nfs(only intra).
It was set-up as RAID 0 with two 1TB Hard drives but I want to change it to RAID 1 for fault tolerance. Is it possible to change existing RAID level? If yes can someone point me to the proper place?
I tried "mdadm" documentation and level set option is available but no explanation available that whether it is only while creating the array or it can change the level too.
View 1 Replies
View Related
Apr 24, 2011
Its from a Synology Box with 3 disks, which one is damaged. But this disk wasnt in use.Take a look on the raid-size of 493 GB - and the both available disks with 250GB..)
On the others there were a linear raid. during this damaged disk the synology-device tells me, that the volume was crashed.But it look like, that this disk was not mounted into this volume.Quote:
DiskStation> mdadm --detail /dev/md2
/dev/md2:
Version : 00.90
[code]....
View 3 Replies
View Related
Mar 28, 2010
I want to upgrade from another distro to ubuntu server for a few reasons. The only problem is I have a lot of data that needs to survive. here is how my computer is setup. I've 5 drives on the computer,
A- 10gb drive for OS and swap only, no data
B,C,D,E - 4x 500 GB drives in a LVM. they make up one large drive with xfs and this volume has about 1.2 TB of data. there is nothing fancy on it, no encryption and no software raid of course the little 10gb drive can be formatted no problem, but the LVM needs to be migrated over intact.
View 5 Replies
View Related
Oct 26, 2010
I have created a filesystem /data using software RAID-1 concept using two disks.
/dev/sdb - 50 GB
/dev/sdc - 50 GB
now i have to increase the /data to 100GB by adding two more disk.
/dev/sdd - 50GB
/dev/sde - 50GB
is this possible, if yes
how exactly i can increase the existing RAID-1 array from 50GB to 100GB.
View 1 Replies
View Related
Apr 18, 2010
I would like to build a NAS from PC (D510MO) running Debian. I have two HDDs (one 3.5 1T and one 2.5 500G).
On 3.5 HDD I have already two partitions 100M+40G dedicated for Win7-64. Now, I want to install Debian (second OS) on this PC and to have some kind of soft RAID or disk mirror of 500G space. I am planning to create a third partition on 3.5 HDD of 500G (identical as 2.5 HDD size) in order to have a mirror 500G space.
Please send my some suggestions on where I have to install Debian; on 500G 2.5HDD or 500G 3.5HDD!Will Debian boot from both HDDs 3.5 or 2.5 after I create the mirror? What Linux soft I have to use for mirroring (mdadm)?
View 3 Replies
View Related
Sep 24, 2010
This seems like a relatively simple question, but the answer seems to elude everyone: What is the MAXIMUM SIZE of a Linux loopback device (not counting any specific filesystem limitations)? Is it the maximum size of a linux block device?
View 4 Replies
View Related
Jan 11, 2010
I have a desktop server set up with 3 x 1Tb disks set up in a number of partitions. Some are under RAID 1, others under RAID 5. eg:
Code:
md0 : active raid1 sdc2[2](S) sdb2[1] sda2[0]
513984 blocks [2/2] [UU]
[code]....
View 6 Replies
View Related
Dec 4, 2010
I have an Linksys NSLU2 with four usb harddrives attached to it. One is for the os, the other three are setup as a RAID5 array. Yes, I know the raid will be slow, but the server is only for storage and will realistically get accessed once or twice a week at the most. I want the drives to spin down but mdadm is doing something in the background to access them. An lsof on the raid device returns nothing at all. The drive are blinking non-stop and never spin down until I stop the raid. Then they all spin down nicely after the appropriate time.
They are Western Digital My Book Essentials and will spin down by themselves if there is no access. What can I shutdown in mdadm to get it to stop continually accessing the drives? Is it the sync mechanism in the software raid that is doing this? I tried setting the monitor to --scan -1 to get to check the device just once, but to no avail. I even went back and formatted the raid with ext2 thinking maybe the journaling had something to do with it. There are no files on the raid device, it's empty.
View 12 Replies
View Related
Aug 20, 2009
In a nutshell, our RAID 1 array was rendered broken and we were advised that core lib files were missing and the OS needed to be reloaded... a quote from our server host:"The OS is not healthy.This server will need a reinstall.
Libs are missing." This was after having replaced what we though was a faulty /dev/sdb. So they reloaded the OS (Debian 5.0.2 x86_64) on 2 FRESH drives, and installed the old /dev/sda as /dev/sdc once the reload was completed. Here's the output of /etc/fstab on the fresh install so we know what we're working with:
Code:
debian:/BAK# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
The one problem I see myself running into is /dev/md1 and /dev/md2 are currently in use by the new system, so I cannot mount it there. I should also note, reloading the OS is a viable option if needed as we haven't started configuring the server yet. So if we need to reinstall the OS and assign the NEW RAID arrays to something other than /dev/md1 and /dev/md2 then we can do that.
View 3 Replies
View Related
Feb 26, 2010
Greetings Fellow Knights Of The Penguin Clan....!I am having issues with device mapper seeing a 275GB Raid5 Lun from my SAN storage.I'm using IBM 2145 San Volume Controller.I am able to see a 40 GB Raid 10 device though..
########################################################################
fdisk -l |grep 'dm-*'
Disk /dev/dm-6: 42.9 GB, 42949672960 bytes
[code]....
View 22 Replies
View Related
Nov 3, 2010
I just installed Debian 5.0.4 successfully. I want to use the PC as a File Server with two Drives configured as a RAID 1 device. Everything with the RAID device works fine, the only question I have belogs to the GRUB 0.97 Booloader. I would like to be able to boot my Server even if one of the disks fail or the filesystem containing the OS becomes corrupt, so I configured only the data partitions to be a RAID 1 device, so on the second disk should be a copy of the last stable installation, similar to this guide:[URL]...
[Code]...
View 3 Replies
View Related
May 29, 2011
There is one directory in /oracle partition in test server which i use to delete that dir after copying in the same location with diff file/dir name. Like this i did so many times.evrytime i m deleting but the /oracle partition space is reducing by 1.5 or 2gb after deleting dirs of 80gb.Directory size is 80GB and partition size 400GB.plz let me knw with steps, is it requires to do De-fragmentation?
View 1 Replies
View Related
Jan 19, 2011
I run Fedora FC13-x64. Recently I added a few TB's of RAID5 storage tto my server and moved most data from the root filesystem to that. Now my root volume is way too big. My basic install resulted in a 1TB LVM volume group entirely dedicated to a single lv_root.
Now I want to make room and eventually clone this disk to a much smaller root disk. I see many threads about reducing the size of an LVM logical volume. My first steps were succesful. I used lvreduce and resize2fs to reduce the size of the logical volume and filesystem. I also user pvreduce to reduce the size of the physical volume group.
But still gparted and fdisk report the physicalk volume (/dev/sde2) as 900GB. The embedded LVM stuff is as small as 60GB. Anyway LVM manager and GParted doe not allow me to shrink /dev/sdf2 to snuggly fit the LVM stuff in it.
View 6 Replies
View Related
Jun 23, 2010
I have an existing unix user that some how didnt make it into the copy over to our LDAP server. How do I add an existing unix user to an existing LDAP directory? Will ldapadd work? I was under the impression ldapadd required an ldif file to work properly.
View 7 Replies
View Related
Apr 6, 2010
I'm having some (well, a lot actually) of problems trying to get OpenSUSE 11.2 installed on my home PC. I am attempting to set up a dual boot configuration with Windows 7 installed on an bios Nvidia RAID 0.I was able to shrink the partition in Windows, and rebooted onto the net install for OpenSUSE (the MD5 validated DVD install failed multiple burns with "Repository not found"). I get into the graphical installer portion with no problems off the net install CD. However, the installer is not recognizing that there is an existing RAID 0. It lists the 2 SATA disks in the RAID separately. I can click on SDA1, and both SDB and SDB1 and it shows the disks, but does not recognize any existing partitions. If I click on SDA I get an immediate segfault in YaST and drop back to the text mode installer menu. It is loading the nv_sata module just fine.
From forum searches and google it seems that this is not usually a problem. My motherboard is a Gigabyte GA-M57SLI-S4 with the Nvidia Nforce 570 chipset running an AMD X2 64 3800+. Removing the stripeset and redoing it as Linux software RAID is not an option, I do not have enough space for a total backup/restore. Anything I do has to be nondestructive to the existing Windows installation.I really want to have a linux installation but between the DVD installer failing and now this issue I am about ready to give up on it.
View 9 Replies
View Related
May 28, 2010
I have recently had a problem with my 10.04 server machine. It will not boot, it seems to be taking forever on the loading screen (normally headless server, but I connected monitor when I couldn't ssh), but that's not why I'm here.
Knowing that I do rsync backups every night at midnight of my machine I just bit the bullet and formatted my / partition. Reinstall went fine, I turned off automatic updates (I suspect an update caused the problem) But now I cannot mount my jmicron raid 1, which is where my rsync backup is (doh!).
sudo fdisk -l
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
[Code]....
View 2 Replies
View Related
Apr 20, 2011
I have an old server I build 7 years ago. I have a RAID5 with 5x2TB HD's and I'm planning a major hardware overhaul. My server currently runs on a Pentium4 3.2 Ghz (pre multicore technology) on a SuperMicro mobo. I'm planning to switch to an AMD Phenom II X6 1100T Black Edition Thuban 3.3GHz, 3.7GHz Turbo 6.
So here's the question. Can I just plug my drives to the new board and restart the RAID like nothing happened? I don't have space to backup all my data if I have to recreate the RAID from scratch.
View 3 Replies
View Related
Sep 15, 2010
It's been a real battle, but I am getting close.I won't go into all the details of the fight that I have had, but I've almost made it to the finish line. Here is the set up. ASUS Z8PE-D18 mother board 2 CPU, 8 Gig Ram. I recently added an OCZ Agility SSD, defined a raid 1 virtual disk on the 1 terabyte WD HDD drives, which will holds all of my user data, the SSD is for executables.The bios is set to AHCI. Windows 7 installed fine, recognizes the raid VD just fine.
I installed Ubuntu 10.04 by first booting into try and mode, then opening a terminal and issuing a "sudo dmraid -ay" command. Then performing the install. I told it to install the raid components, and told it to let me specify the partitions manually. When setting up the partitions, I told it to use the free space I set aside on the SSD from the Windows 7 install as ext4 and to mount root there. Ubuntu installed just fine, grub2 comes up just fine, and Windows 7 boots with out a hitch, recognizing the mirrored partition as I indicated previously. When I tell grub to boot linux however, it pauses and I get the "no block devices found" message. It will then boot, but it does not recognize the raid array. After Ubuntu starts up I can run "dmraid -ay" and it recognizes the raid array, but shows the two component disks of the raid array as well. It will not allow the component disks to be mounted, but they show up which is annoying. (I can live with that if I have to)
I have fixed a similar problem before by setting up a dmraid script in /etc/initramfs-tools/scripts/local-top ... following the instructions found at the bottom of this blog:[URL].. To recap: My problem is that after grub2 fires up Ubuntu 10.04.1 LTS (Lucid Lynx), it pauses, and I get "no block devices found" It then boots but does not recognize the raid array untill I manually run "dmraid -ay". I've hunted around for what to do but I have not found anything. It may be some timing issue or something, but I am so tired of beating my head against this wall.
View 4 Replies
View Related
Aug 1, 2011
I'm running 10.04 x86 server with a really simple installation on a single 250GB boot disk. I then have a RAID5 array as /dev/md0 (set up using mdadm with x4 2TB disks). All is working well. My mdadm.conf file looks like this
Code:
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
[code]....
if I was to lose the boot disk and need to remount the RAID array on a fresh installation, what steps do I need to go through. My assumption is that the superblocks on the RAID disks will be used and I don't need to keep any additional information - is this right?
View 6 Replies
View Related
May 13, 2010
I have two SAS RAID controller cards in a Dell server in slots 2 & 3, both with an array hanging off them. I went to install a third card into slot 1, but then when it boots it says two of my sd's have bad magic number in the super-block and it wants me to create an alternative one, which I don't want to do. If i remove the new card, the server boots perfectly like it did before I added the new card. Is the new card trying to control stuff that isn't hooked up to it because its in slot 1, so its confusing RHEL?
View 5 Replies
View Related
Sep 23, 2011
I have a home samba server with a 3ware Escalade 8506-8. I have 5 x 500 gig hard drives in a RAID 5 array. Recently, my 8506 died and I need to get a new one. However, I saw a 3ware Escalade 9500S-12 on ebay for about $20.00 dollars more than a replacement 8506-8.
My question is, if I put my drives on the 9500S, will it recognize my existing RAID array? Or will it want to build a new RAID array and format all of my data?Hope I have asked this question clearly, little short on sleep this week.
View 3 Replies
View Related
Jun 6, 2010
I'm thinking of adding a 40GB H/D to a 80GB H/D using RAID.I don't know if the size difference will affect performance.Is it worth the time? Would it run like a 120GB H/D?(or close to it).
View 3 Replies
View Related
