Server :: Debian Quadcore With 150 Mount.cifs Going Extremely Slow On Commands
Jul 9, 2010
I've mounted a kind of proxy to map some cifs folders, 150 aprox. It umounts and mounts everything each hour, to check on changes on a configfile managed by a secretary, she just edits a file with names and I prepared a cron to notice the new mountpoints. It's a debian, no desktop , no nothing else. Just mount.cifs and apache2 to let the master webpage access to some files on each user samba home. The server has 4 cores and 2Gb of RAM. It's brand new, but it goes very slow.
[Code]....
Does anyone have an idea why is that working so slow? The apache is working well, it's the shell which is working extremelly slow.
View 3 Replies
ADVERTISEMENT
Aug 20, 2009
I used command as followings. nothing special. mount -t cifs //192.168.55.53/windows$/Home /mnt/ -o user=username%password It works well after mounted. But mounting itself takes 1-2 minutes terribly. After mounted successfully, file transfer speed looks to be normal.
View 9 Replies
View Related
Aug 31, 2010
We have an environment where couple of webservers are being active behind the loadbalancer, the webpage is getting loaded extremely slow if we restart the apache on those boxes its responding very fine. So currently we are restarting the apache service daily basis, i have attached the config with this thread could anyone suggest how to fine tune apache so it works fine without restarting it daily?
View 2 Replies
View Related
Jun 28, 2010
I am new to Centos and linux in general. I have just got myself a Dell 1950 server with 2x 1T SATA2 hard disks in it. now the server comes with a PERC5i Raid card with 512Mb. Well I put these in raid 0 and the raid card initilzed the disks to 128 writeback and read ahead. When I loaded centos it did not recognize the dell layout so therefore wanted to initalize it again, so I done this as it wanted. Now I created a 80gb boot and o/s partition and a 100gb swap the rest was created into LVM space to run solus vmwear. But I found the raid 0 to be getting extreamly slow read and write speeds.
Example same disks
Desktop PC max 214mb/s windows vista 64
Server with centos 104mb/s
Now I am not sure but I am told that I need to align the o/s with the raid card settings but I have no idea how to do this. How to do this in plain easy step by step instructions. I mean how to calculate it, how to format the disk this way, and what files to edit where if needed. I have spent hours trying to figure out why my raid 0 is slower than a single disk.
View 1 Replies
View Related
Jun 13, 2010
Running RHEL 5.5 x64 with the latest updates. Running Oracle 11gR2. Server has 8gb ram 2xcpu 2.4 xeon.Only running one fresh instance of Oracle, no applications are even pointed at the DB.Two Issues...
1. Logins via SSH to server are extremely slow, about 30 seconds after typing password
2. Once I am logged in, launching sqlplus is very slow. After typing password, sqlplus hangs for 15 or so seconds.
Even when I am actually at the console, login of course is instantaneous.. but sqlplus still has the same issue. CPU is at 0% no swap is being used. Shouldn't be a network issue, on the same network.
View 2 Replies
View Related
Jul 12, 2011
Same computer and flash. Two results on different OS:
Write speed under debian: 0.4 MB/s
Write speed under Windows: 6.6 MB/s
From what i've been reading on the net I guess it's something to do with the mount - sync option.
I've notice that there are couple of workarounds but all of them are pretty tedious.
Is there any simple (GUI - one/two clicks) tool that allow to mount/unmount flash disk easily using the correct options?
I'm using Squeeze 6.0.2 (Kernel 2.6.32-5-amd64), gnome 2.30.2
View 2 Replies
View Related
Jun 16, 2010
I've had this odd, stubborn problem that seems to be related to the nouveau video driver and certain kernel builds: opening or saving full resolution jpeg image files using GIMP takes from 1-5 minutes and causes xorg CPU usage to reach almost 100%.This also occurs when using UFRaw to open Canon raw image files. The problem is not intermittent, it happens each time I open a file. Opening photos in the default image viewer works fine.This bug has vexed me on and off for the last couple of months, and seems to be triggered by a combination of kernel version and the Nouveau driver. I switched to Debian Squeeze from Ubuntu 10.04 because I was experiencing slow image open times in Ubuntu 10.04 (using the Nouveau driver).I did not experience the bug running Squeeze with the nv driver and kernel 2.6.32-3.
I did not have the bug running Squeeze with the nouveau driver and kernel 2.6.32-5 backported from Sid.I began experiencing the bug again after the Squeeze updates on June 14th (still running nouveau and kernel 2.6.32-5). I update daily so it's likely to be that day's updates which caused the bug to reappear.Just for grins, I installed the Liquorix kernel. The bug does not occur using kernel 2.6.34-0.dmz.10-liquorix-686 and the nouveau video driver.I have a Nvidia FX5500 video card. I prefer the nouveau driver to nv as my display seems to behave better. The Nvidia proprietary drivers are not an option because they produce X freezes when I am doing photo editing. The liquorix kernel seems to be working fine, but for long-term stability I'd rather be running a mainline Debian kernel.
View 5 Replies
View Related
Jul 15, 2011
Same computer and flash. Two results on different OS:
Write speed under debian: 0.4 MB/s
Write speed under Windows: 6.6 MB/s
From what i've been reading on the net I guess it's something to do with the mount - sync option. I've notice that there are couple of workarounds but all of them are pretty tedious.
Is there any simple (GUI - one/two clicks) tool that allow to mount/unmount flash disk easily using the correct options?
I'm using Squeeze 6.0.2 (Kernel 2.6.32-5-amd64), gnome 2.30.2
View 10 Replies
View Related
Jan 28, 2010
I have one NAS device and using samba share one folder without password, how can I use command mount -t cifs to mount this share folder? I tried the below command, but always popup password checking?How should I do mount this folder without password checking?
View 3 Replies
View Related
Mar 15, 2011
I am trying to image about 30 laptops with WinXP, and I am using Clonezilla and DRBL for the task. We will start migration to Win7 starting Q4, so for now we are still using XP. I used a Clonezilla live USB to capture a standardized image to a CIFS/SAMBA share on the enterprise file server. The file server does not support NFS. To deploy the image, I used Virtualbox to build a VM with Centos 5.5 and then later Ubuntu 10.10. I mounted the CIFS share to /home/partimag but I found that I cannot share this CIFS mount out as NFS so I was unable to deploy the image with the image still residing on the CIFS; I had to copy the image to the VM's local drive.
Now using the DRBL live distribution, which is Debian based, I was able to obtain the image from a CIFS share and then share it out to the clients to be imaged as NFS (I think). I was able to use the DRBL live for some older computers, but since that hasn't been updated in nearly 2 years, I think it's missing some device drivers for my newer machines so it doesn't work on them -- this is why I looked at using CentOS and Ubuntu. To mount the CIFS shares, I'm using the following command:
mount -t cifs -o user@domain //share_ip_addr/share_name/folder /home/mount_point
Do I need to do something different to enable the mounted CIFS share to be shared out as a NFS share so that the clients to be imaged can see the contents from the CIFS share as a NFS share? The below image depicts my setup. The workstation has two NICs. The 10 network is the enterprise network and the 192 network is for DRBL imaging only. DRBL/Clonezilla does PXE boot and leases DHCP for the laptops. The laptops are shielded from the enterprise LAN; I am not doing any kind of NAT on on the server. The Linux VM is built with dual NICs and are set to bridged mode so they appear to be a separate NIC from the VM host on the network even though they going into the same port on the wall. [URL]
View 4 Replies
View Related
May 2, 2010
I have a Western Digital "My Book" on my network which I have mounted with cifs.
If I go into it and vi a file, all is fine. I can write and save and close. When I open the file and add to it and then try to write it again, I get the message:
"thefilename" E212: Can't open file for writing
The file is owned by me still and the permissions are -rw-rw-r--
I don't understand why it works the first time and not the second. Also this same effect is observable when I save from another program to there. The first save is fine, the second can not be saved.
View 5 Replies
View Related
Jun 25, 2010
I've got a Seagate Blackarmor NAS which I can mount with CIFS to my Centos 5 server fine but only root can read and write to it. All other users can only read. I've tried several different mount options but results are always the same.
Specific issue: I'm trying to connect the the NAS so Bacula, a backup app, can write backups to it. "bacula" is set up as a user on the NAS. BTW, I'm pretty sure the OS on the NAS is Linux, and I can connect through windows and write fine.
View 2 Replies
View Related
May 6, 2015
So after having spent the past half year preparing to abandon Windows and come over to Debian I finally made the switch last night only to realize I forgot one important thing... I didn't figure out how to map the network drive on my Windows server (currently learning to replace this with Debian as well) to my Debian system.
I have read about 15 links but keep getting the following error: Mount Error (6): No such device or address
Here is what I'm trying to enter into my terminal (with important bits removed for security of course)
mount -t cifs //xxx.xxx.xxx.xxx/Network_Storage/ -o username=xxx,password=xxx /mnt/cifs
View 14 Replies
View Related
Sep 28, 2010
Using Fedore 12 I am trying to mount on a server with the following command: # mount -t cifs //samba-pool-suse/pool-suse /mnt -o user=xxxx I was waiting that the system askme the user password and thats all, but the answer is: mount: wrong fs type, bad option, bad superblock on //samba-pool-suse/pool-suse, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program) In some cases useful info is found in syslog - try dmesg | tail or so using:# dmesg | tail returs: CIFS VFS: cifs_mount failed w/return code = -22
View 3 Replies
View Related
Jun 27, 2011
I have a linux server running slackware 13.37. I am trying to mount a samba share with my other slackware machine, but I get a "mount error(13): Permission denied" when I run
sudo mount -t cifs //server/share /mnt
But, if I run
sudo mount -t cifs //192.168.1.100/share /mnt
[code]...
View 2 Replies
View Related
Jun 18, 2009
I've been trying for a while mounting a EMC NAS share on linux. As far as I know the NAS share behaves just like a regular windows share, so the mount process should be very similar. On the NAS server, the disc "Disc1" is shared, and I need to mount a sub-subfolder of that share. This is my line in /etc/fstab:
Code:
//windows_box/Disc1$/folder1/subfolder /var/tmp/mount_test cifs defaults,acl,soft,uid=srvadm,gid=adm,umask=0027,file_mode=0600,dir_mode=0700,credentials=/root/cred.txt,sec=ntlmv2 0 0
When mounting the share, this is what happens:
Code:
[root@server1 tmp]# ll
total 8
drwxr-xr-x 2 root root 4096 Jun 18 10:39 mount_test
[code]....
In the console (i.e. bash), the "mount_test" word on the last line has a red background. When I issue "umount mount_test", everything is back to normal.
View 13 Replies
View Related
Apr 29, 2010
We have a homegrown process that runs on a windows box and produces a csv file. We mount the directory these are output to using autofs/cifs and then process them using a program on our linux database servers.
Is there a way from linux, looking at the cifs share, to tell if the target file is currently in use by a process on the windows box? We are having issues where an incomplete file is being processed occasionally.
View 5 Replies
View Related
Nov 17, 2015
I'm using Debian 8.2 from a very recent download of the latest NetInst (less than 2 weeks). I'm sort of new to Linux - More accurately, I've used Unix and Linux extensively in the past, so most of my knowledge is dated. In particular, the whole systemd / systemctl paradigm is completely new to me.
Problem: I've added an entry to /etc/fstab to mount a NAS drive as CIFS. When I do a system shutdown or reboot, the system hangs for 90 seconds trying to unmount the NAS. If I manually umount the NAS prior to shutdown / reboot everything works fine.
I've done a fair amount of investigation and web searches, but haven't found a fix yet. Apparently several people were encountering similar problems about a year back, and it seems pretty clear that the root cause what ordering of steps in the shutdown process, e.g., WLAN being turned off before unmounting filesystems. This seems to have been resolved for most users (no one is discussing it any more), but I'm now running into the same issue. Ugh.
I tried to add a shell script to /etc/rc0.d to umount the NAS first in the shutdown process. This had no effect. I assume this is because the new systemd / systemctl paradigm supplants the old /etc/rc model of runlevel control, though it is rather baffling (to me, at least) as to why /etc/rc* still exists if the system is no longer using it...?
Here's some things I'd like to try, but how to proceed:
1. In the new systemd / systemctl paradigm, how do I examine and change the ordering of steps in the shutdown process? I've seen a lot of documentation on systemd, but nothing tells me how to do what I used to be able to do with /etc/rc with a simple rename of a symlink. If I knew how to look at the order of shutdown and change that ordering, I'm fairly certain I could identify and resolve this issue.
2. Is there some other way to mount my CIFS NAS other than editing /etc/fstab? Is it possible that my manual edit to /etc/fstab is the cause of this issue? My research into systemd indicates that it IS supposed to be compatible with /etc/fstab. I have not yet found documentation describing how to mount a filesystem at boot WITHOUT editing /etc/fstab ...
View 8 Replies
View Related
Nov 20, 2010
Running Debian stable. I added the following command to rc.local and made it executable:mount -t cifs -o username=ted,password=computer,uid=mooreted,gid=users "//192.168.1.121/Storage Volume" /mnt/vortexAfter rebooting dmesg throws the following error:
[ 21.400697] CIFS VFS: Error connecting to IPv4 socket. Aborting operation
[ 21.400708] CIFS VFS: cifs_mount failed w/return code = -101
However, if I run the command as root after the system boots it works fine.Been using this method on other distros for over a year. No idea what the problem is.
View 4 Replies
View Related
Feb 18, 2009
I am trying to mount a samba share using an fstab entry
//srv1/Corporate /winfiles cifs user,uid=0,rw,noauto,suid,credentials=/root/wnmount_credentials.txt 0 0
The mount appears to complete cleanly, however when I browse the directory /winfiles it is always empty.The smbclient command works properly using the same credentials.The /root/credentials file looks something like this
username=********
password=********
View 5 Replies
View Related
Apr 4, 2011
Linux box info: root@mytestbox:~# uname -a Linux mytestbox 2.6.32-30-generic-pae #59-Ubuntu SMP Tue Mar 1 23:01:33 UTC 2011 i686 GNU/Linux
Windows box info: Windows Server 2008 SP2 Enterprise I've verified via --verbose output that mount.cifs is indeed processing the passed on options.
root@mytestbox:~# mount -t cifs //10.1.1.10/Test /root/testwin --verbose -o credentials=/root/testcreds,rw,nocase,noperm,noacl,nounix,noserverin o,iocharset=utf8,file_mode=0777,dir_mode=0777
[Code]...
Yet, when I type mount all it reports is (rw,mand). The share works just fine, and I can see the masking (all files are showing as rwxrwxrwx as expected etc) but mount is not listing the options?!
Is this normal expected behavior? Is there a bug report on this? I've google'd to the best of my capabilities and could not locate any such information which is why I decided to hit the forums prior to filing a bug.
View 1 Replies
View Related
Jan 27, 2010
I run F12. Since some days my laptop has become very sluggish. In Mozilla, switching between the tabs takes like seconds instead of fraction of a second. Also minimizing and mximizing windows takes long. Switching between the windows too takes long. Now I can't see the cursor while typing this post. I disabled some services that start at the boot time. I'm posting a list of services that are on in the runlevel 5 as that's the one I use.
View 5 Replies
View Related
May 1, 2010
Not much else to say. I'd say it takes at least a minute before I get to the login screen. After that it runs fine and most of the previous problems I've had since upgrading have resolved themselves. why it's taking so long to boot up?
View 1 Replies
View Related
Jun 12, 2010
Have a little problem/annoyance. I was trying to use a Live CD with Lucid Lynx 10.04 x86 edition and the speed was incredibly slow. I took more than 10 minutes just to start. I noticed the CD drive stopped spinning (or spinning so slow I couldn't hear it) at times, then starting up again. I also noticed multiple i/o error in the logs after it finally booted up. The reason why I think this is a bug and not my drive/cd is simple:
a) The MD5ed the iso and even made two CDs with different burners. I tried older Ubuntu as well as several other Linux distros and the Live CD boot time is much faster (1-2 min). Tried the CD on a way, way older ancient laptop and i booted just fine and much faster.(I will provide any other info if needed).
View 9 Replies
View Related
Aug 12, 2010
At work, we use Ubuntu to compile large numbers of C, C++, Java, and AIDL files.My system is a Core i7 Quad-Core with 8GiB of RAM. Prior to this install, it ran Ubuntu 9.10, 32-bit. A basic compile took roughly 45 minutes.I just did a clean install with (x)Ubuntu 10.04 64-bit. After setting up the build environment to allow 32-bit libraries (mobile development), a compile took roughly an hour:15.
View 2 Replies
View Related
Oct 10, 2010
I have had an extremely slow startup (upwards of a few minutes) for awhile now, and nothing seems to work to fix it. Regular boot time is far slower than it should be, and the time of logging in to a workable desktop is just really bad. I will log in, and then I will either get a blank desktop screen for awhile or an all black screen until the desktop will fully load with errors from gnome-panel and AWN not starting up automatically.Some of the fixes I have tried:
Disabling floppy from bios
Downgrading gnome keyring
Removing gnome* and gconf* from the home directory
Putting this script in /etc/init.d
#!/bin/sh
echo "nameserver 0.0.0.0" > /etc/resolv.conf
Here's my bootchart and a link in case the upload has problems http:[url].....
View 5 Replies
View Related
May 17, 2011
I have an HP LaserJet 2100M.Printing OpenOffice documents is o.k. no great delay but when I print out from browser pages (html) each page can take up to 10 minutes to print.I don't know how to troubleshoot this.
View 3 Replies
View Related
Aug 3, 2010
I downloaded the emulator called pSX so i can play my playstation cds in my computer. on my laptop i have slackware 12.2 installed.
The dependencies for the emulator are:
opengl
gtk
alsa
gtkglext
libxml
I found the appropriate packages for all of these (with the exception of opengl, I assume that means it's preinstalled, correct me if I'm wrong) and installed them. the emulator runs, at about a quarter the speed it's supposed to. I get no error messages in the terminal, just the huge speed drop. has anybody else gotten this emulator to work fine in slackware?
View 2 Replies
View Related
May 28, 2011
my installed windows makes full use of the 32mbit connection. in fedora i get between 10kbit and 100kbit.this is very annoying especially while browsing the net or using the package manager to do updates or download new software. what could be the problem and how could i solve it?
i very much like the look and feel of fedora 15, but this just makes it unusable on a daily basis.
View 5 Replies
View Related
Feb 26, 2010
I know this has technically been posted but I think my situation is a bit different. People have been complaining that karmic is slower to boot. But from what I gather, it's only a few seconds extra due to an extra splash screen. I'm running Ubuntu Studio and mine takes like 5 minutes and is showing me 3 splash screens! 2 for regular Ubuntu and 1 for studio, which is the most sluggish of the three.
My computer is a Toshiba Satellite A75
2.8 ghz pentium M
1.5 gb ram
Radeon graphics
60gb hdd
EDIT: Also, recovering from hibernate takes a few min. Related?
View 8 Replies
View Related
