Server :: Apache 2 To Handle Mobile Sites?
Oct 22, 2010
I was just wondering what the best approach is to allow mobile device sites on my web server is?Its an apache 2 server running on Centos and I am just very curious as to how to best present a site just in standard output for a mobile site, ie no server side programming or scripts (but would like to do some eventually).I actually have someone asking for someone on his development team and would love to be that person with that attribute lol.
View 2 Replies
ADVERTISEMENT
Jun 24, 2010
My intention is to have EngineX on the frontend handling all static files, and Apache + mod_php in charge of handling PHP requests. I have optimized nginx to be as efficient as possible in handling static files, but have very little experience with Apache. Since Apache would only be processing PHP requests, would the standard Apache optimization guides suffice or would it best to configure it differently?
PS: this is a dedicated file server, the database is hosted separately.
View 2 Replies
View Related
Jul 11, 2010
I was trying to set up a virtual host, but I could not find a sites-available to it. What is its alternative
View 3 Replies
View Related
Jul 5, 2010
how is it possible to serve multiple sites hosted in my computer with apache through dyndns.I am using ubuntu 10.04 and i had setup a dyndns domain as of mydomain.homelinux.org/127.0.1.1 medic. Now when i go to mydomain. homelinux.org outside of my lan i see the default site of apache.
View 3 Replies
View Related
Oct 14, 2010
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
View 7 Replies
View Related
Feb 9, 2011
In the past week or so I've noticed some weird network behaviour. I find accessing some sites such as Amazon, Paypal, and Bigstockphoto really slow. Sometimes the page will not load at all. Other sites are fine. The problem sites are not a problem for others on my LAN at home. When I try to open the problem sites, I can see in Firestarter blocked connections coming from 2.1(8/9).xxx.xxx on various ports such as 36007. This only happens for the problem sites. I attached a typical output from firestarter.
This happens with Firfeox or Chrome. Using Ubuntu 10.10
View 4 Replies
View Related
Feb 4, 2010
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies
View Related
Jan 24, 2010
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
View 5 Replies
View Related
May 30, 2010
My sites on the server are loading very slow, though my server load is under 1.00.What can be the problem, when ever i restart httpd the sites starts to load instantly.
View 14 Replies
View Related
Nov 19, 2010
I am running a centOS server using ISPconfig 3.My web sites are not showing content only this phrase 403 Forbidden
You don't have permission to access / on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
View 168 Replies
View Related
Jun 18, 2010
In my college all popular sites blocked i am working on linux... is it possible to Encrypt the http request? anyother way except proxy sites
View 2 Replies
View Related
Apr 2, 2011
what kind of dist/software would you recomend to use for a a vpn server that can handle 10 diffrent nets each seperated from the other if i connect with user1 i get on net1 and user2 gets on net2 the vpn server is always connected to the other location at all time i just want to be able to conenct in to my the net i want to the reason i dont want to go Destination is that the vpn server is gonna handle otherstuff that the nets will be conencted to input
View 3 Replies
View Related
Mar 22, 2011
From my main Postfix SMTP heads, I am sending just a couple select emails (primarily support emails) off to a server that receives them and pipes them into the support software. So far this totally works perfectly and I am pretty happy with the configuration. However, in order for sendmail on the support server to receive those emails I have to place them in the virtusertable of course, but I also have to activate their domain in the local-host-names file. That then causes sendmail to consider itself as the destination server for that whole domain.Is there a way to make sendmail receive email for select addresses without making it think it's the server for the whole domain? This server is only receiving email from two specific smtp servers, so I wonder if I could just permit relaying? Wonder if that would just cause a giant loop though.
View 1 Replies
View Related
Apr 19, 2011
How do clients handle offline syslog servers?Will the log files be buffered locally to be sent to the syslog server when it comes back online, or will any log data generated during downtime be lost in cyber space?
View 1 Replies
View Related
Mar 16, 2010
I have a cpanel server(not sure if that matters). I wanna transfer to another cpanel server. The size is about 3TB, I dont have enough on the hard drive to zip then transfer that way, and cpanel cant handle moving such a large migration.Been searching on the net to find an answer but everyone saying to backup then migrate. whats best tar or rsync or somthing else.
View 3 Replies
View Related
Dec 29, 2010
Am trying to do a mount of a Windows folder onto Linux. The path has some spaces in it like //hostname/path 1/path 2/path 3. How I should handle this?
View 6 Replies
View Related
Sep 20, 2009
I have a server with 8GIG of ram and a quad-core q9550 CPU and 500GIG of hard-disk space, and 100Mbps net connection.I have separated it into 3 parts of 2 Gigs of ram each, by virtualization, so there are 3 VPSes. The problem is that the one of the VPSes (created) with centos and WHM/cpanel would go down very often, as many as 60 times per day!I asked one of my friends to have a look at it, and he told me that Tomcat was the reason.Things got a little better (ask me what I changed about Tomcat?!) and after that the server would go down only about 20 to 30 times per day.I asked the friend again, and he told me that the CPanel integrated antivirus would cause the high load periodically.(Ask me again, what did I change?) And after that the server would go down only about 4 to 10 times per day.Now, as far as I can tell, there is nothing more that would/should cause the server to go down.
About 30 minutes ago, before writing this post, the hosted sites were unavailable again, for about 30 seconds.I checked the load through ssh and I saw that the load is 3, so I went to the main server and checked the VPS ram and noticed that only 10% of the cpu is used and only 307Mb of available RAM is used.
Everything shows that the server should be functioning OK, but it still seems to get unavailable far too often.
I used the top command and noticed that there is nothing using the cpu and the ram and all of them are 0.I used the mysqladmin proc command and again nothing noticeably weird seemed obvious at this time. I also checked the other VPSes and they were also in relatively low-resource-consumption states(I don't understand this part):Also sometimes I use the top command when the load goes high I see that all of the users, even the non visitors users site use cpu seems forexample a refreshing things or updating thing updates all of the accounts forexample mysql or so Please help me to figure out what other things might be causing these service/server high loads and unavailability.
View 16 Replies
View Related
Jul 30, 2011
What's the best way to move over 500 sites from a webserver with apache and mysql on the same server.. to a new server?
View 1 Replies
View Related
Apr 3, 2010
After a recent CentOS upgrade, my PHP has gone nuts.About 50% of the time, the websites will show just fine from my web-server.Most of my sites are wordpress related; all have the same issue. Standard HTML sites load okay all the time, though.
View 12 Replies
View Related
Feb 4, 2011
I used vmware to create a guest OS in vmware.The IP of Guest Ubuntu is 192.168.43.129 and that of host Ubuntu is 192.168.1.3
Here is apache log when I access the site on machine where it actually is (guest os) as http://localhost
the apache log shows
Quote:
127.0.0.1 - - [04/Feb/2011:22:18:29 +0530] "GET /some/templates/default/images/ButtonsBack.gif HTTP/1.1" 304 - "http://localhost/some/templates/default/delos.css" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.8) Gecko/2009033100 Ubuntu/9.04 (jaunty) Firefox/3.0.8"
[Code]....
View 2 Replies
View Related
Feb 4, 2011
i'm finding that websites that require webcams like chatrt, omeegle, mebeam etc wont allow me to connect, it will say connect to server, or initializing and never pass this stage - is this an ubuntu flash/java issue or is it something else entirely?
View 2 Replies
View Related
Jul 5, 2010
I have a dedicated server with two sites ie site1 & site2. We have two sites which need to share the same images folder, the situation is a shopping site (site1) with one category of products which we have decided to setup as dedicated site for (site2).
Our system uploads the images to site1 directory ie:/home/site1/public_html/images/image1.jpg
I don't want to duplicate the images into site2 images directory so is there a way of sharing them using the following url /home/site2/public_html/images/image1.jpg (which pulls site1 image)
View 3 Replies
View Related
Feb 4, 2011
For some reason my DNS servers aren't able to resolve certain names. Most names resolve fine there are just a few that don't work. Nslookup doesn't work either of course, and curiously neither does "whois".
Here's an example:
Quote:
dig facebookmail.com +trace
; <<>> DiG 9.2.4 <<>> facebookmail.com +trace
;; global options: printcmd
[code]...
View 2 Replies
View Related
May 19, 2010
i just implemented ur instruction n got success but i have one problem that i want to provide only two or three web sites access to groups in squid.
View 1 Replies
View Related
Apr 18, 2011
Is there a way to prevent users of an OpenVPN service from accessing restricted sites? I know this can be done through a proxy server but through a VPN there seems to be no way of preventing traffic from accessing porn sites or other as the traffic is encrypted. I am using a VPN in the same fashion as a proxy server except that the VPN is necessary because some video sites use rtmp on port 1935, which a proxy server cannot route.
View 7 Replies
View Related
Aug 13, 2010
When i starts it for the first time,my sites getting loaded fast when requested through browser,but slows down gradually. what could be the reason, my cpu load seems ok. Because i have another site hosted through apache in the same server and its getting loaded fast. so what could be the issue.
View 1 Replies
View Related
Mar 15, 2010
i have different subnet running on my network they are 192.168.1.0 to 13.0, i want to restrict subnets with different sites. for example. from 1.0 to 6.0 i want to give them 3 sites to visit, for 8.0 give some different sites to visit. allow all traffic to 13.0 but block few sites for them. i want to use url_regex for this and place sites name in different locations.
View 1 Replies
View Related
Apr 30, 2009
Here's the text from the serial console before I rebooted:
BUG: unable to handle kernel paging request at ffff8140320234b8
IP: [<ffffffff802b0a13>] dentry_iput+0x26/0x9d
PGD 8063 PUD 0
[code]....
My root server is using CentOS release 5.2 (Final), kernel 2.6.26.5-rootserver-20080917a, SMP, 64-bit This Oops happened yesterday and before that it happened on March 14th of this year, and before that on January 31st of this year, so a repeating pattern. On the January 31st Oops, I just rebooted. On the March 14th Oops, I reformatted the two swap partitions as follows: mkswap -c /dev/sda2; mkswap -c /dev/sdb2 On this last Oops, I turned off the swap for 24-hours, then decided to turn it on again after doing the above mkswap again. During the previous uptime, I had dumpcap packet capture running, but this last reboot, I'm not going to run it.
View 1 Replies
View Related
Aug 15, 2010
Recently I've been earning money doing web development, php, html/css, MySQL and so on. What I have encountered a lot are clients that need a complete solution. They need their site built, but they also need a hosting solution. I've sent more than just a few clients off to GoDaddy, and quite frankly, I'd like to cash in on some of that.
It would do wonders for my business if I could offer them a hosting solution with full support on top of building their site. My problem is I have no idea how to do this. So I'd like to know how I can host multiple sites on the same server. Does anyone know of a nice guide I can follow to set this up? It's really important that I can add sites fairly easily over the internet. Since I will be away at school, I won't have direct access to the server
View 4 Replies
View Related
May 19, 2010
i have seven department in my office. i want to restricte web sites for all the departments but not same web sites for all the departments i.e. different sites for different departments.i have no idea about this issue.
View 1 Replies
View Related
