I'd like to ask one simple question I can't figure out how to solve.I've set up my public key authentication by generating the public key on my Windows box. Copied that into /root/.ssh/authorized_keysDisabled password authentication in /etc/ssh/sshd_config:
#Port 22
#Protocol 2,1
Protocol 2
[code]...
I am trying to install openssh server with public key authentication on CentOS.
But i am getting following error message: Disconnected: No supported authentication method available Server refused keys
My sshd_conf file is as follows:
I want to setup SSH with DSA public key authentication between two servers
View 1 Replies View RelatedI often run into this and it's such a hassle that I have had no choice but to ignore it. But, I would like to run it properly but I don't understand why my sources list is 'wrong' or has incorrect info so that it's often not verified or authenticated. The public keyring is wrong or the source or both? I get these messages, for e.g.:
# apt-get update && apt-get install dmo-archive-keyring && apt-get update exit with result:
W: GPG error: http://unofficial.debian-maintainers.org squeeze Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9EEBC8DB9B9C3CB6
I probably don't need that but I ran into a similar error trying to authenticate the multimedia keyring. Not sure it worked but I am guessing the system works the same with all the authentications? I hope to understand what I'm doing wrong and what the process is.
I created a private/public pair. I put the public on github.But I can never push to github.Every time, it says public denied. In order to push, I need to do this:eval ssh-agentssh-add ~/.ssh/github_dsaThis is driving me nuts that I have to do this every time. So, I just put it in my ~/.bashrc file. I feel like that's a hack. Is this normal?
View 1 Replies View RelatedI'm trying to connect to my Xubuntu box (zelda) remotely using my RSA key. I'm using Cygwin on my Windows box (link) to SSH in to the Xubuntu box. I've created the key and placed it in the authorized_keys file on my remote box. Here's where it gets weird. When I ssh into zelda the first time, it prompts me for my password. However, if I'm already connected to zelda and try to open another connection, it prompts me for my RSA passphrase. This is very confusing, and I have no idea what's going on.Here's my sshd_config file on zelda.
Code:
# Package generated configuration file
# See the sshd(8) manpage for details
[code]...
Im trying to create a public/private key for open ssh, I don't really know what difference between the two. I want it to all be one command and not have to hit enter after each command. Here is what I mean:i type "ssh-keygen"and it asks me were to save, then my paraphrase, then reenter the paraphrase.I just want to be I guess you could say unattended if that makes any sense.
View 1 Replies View RelatedAfter years with Linux and using ssh on a daily basis I have to admit I've never setup public/private key authentication and I've never run passwordless logon to ssh. It's not that I've never tried, I have - I've just never got it working. That to me is an almost alien concept as I am a tinkerer at heart and rarely stop until something is working the way I'd like it to. I get the principle of what's going on but I've always had a mental block about it.
View 3 Replies View RelatedI have a little problem
For years, I've been using SSH with public key authentication to connect to a remote server, and my private key is formatted like this:
Code...
I've tried creating a new key which uses DSA, but I got the same result...
Does anyone know what the cause to this might be?
I've installed it properly until it works now, it does send emails and receive them, but heres the problem.
1) it does not send emails to a certain domain, unless i do dpkg-reconfigure on exim4 and put the domain on allowed relay... can't i just put something on settings which allow to send emails to ALL domains?
2) EVERYONE can connect to the server by telnet from any position, terminal or pc, and just use an existing user to send emails to anyone.... example, i have testuser123 setted up in debian/exim4 .. then they simply write "mail from:testuser123@host.dot" and the server accepts it.. without even request an authentication for that. And this is a problem, because everyone can use my email addresses to send emails to whoever.. heaven for spammers/hackers..
I have an ssh (OpenSSH_5.1p1 Debian-6ubuntu2) client A and a server B set up for public key authentication as described in [URL]
The problem is the following: ssh asks for a password when connecting from A to B without any other ssh session going on between A and B; but if I connect from A to B whenever there is another ssh session between A and B, either I get prompted for the passphrase I used to encrypt the private key or I get logged automatically.
I already checked permissions on B: .ssh is 700 and authorized_keys is 600. I already tried "StrictModes no" in sshd_config. Printing debug information using DEBUG3 does not any useful insight. Moreover, there is no /var/log/secure (is it supposed to be there?)
Right now the computer is far far away from my reach, but when I configured the system I noted that whenever I was locally logged to B and then ssh'ed from A to B, I was logged in without any problem; whenever I was not logged in locally I was asked for a password. Note that at that time I was using a different public/private key pair whose private part had no passphrase.
how to know exactly what cipher is ssh/sshd using for a particular session? Is there a way to know any statistics for a given session (something like the ~s option in section 5 of [URL]
P.S. 2: does the following mean that ssh is using protocol 2.0 or something different than protocol 2.0?
(..........) sshd[2606]: debug1: Enabling compatibility mode for protocol 2.0
So after tinkering for a while, I was able to configure ssh for private/public key authentication and disabled Password-Authentication. In the past I had some issues with people brute force trying passwords/usernames so I want to avoid this, but I need some form of secure FTP that now doesn't work due to the aforementioned setting.
View 2 Replies View RelatedI'm trying to get OpenSSH public key authentication to work. My server runs ubuntu. My client is a windows machine, and I'm using cygwin. I tried using the instructions here: [URL]... If I test it out using this line: ssh -v -v -v -o PreferredAuthentications=publickey server.example.org
I get this:
debug3: no such identity: /home/Julie/.ssh/identity
debug1: Offering public key: /home/Julie/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug3: Wrote 368 bytes for a total of 1477
[Code]...
I'm trying to restrict command line ssh and yet keep NoMachine working, so I followed this post [URL]... and tried adding this to /etc/ssh/sshd_config:
AllowUsers nx@*.*.*.* paul@*.*.*.* *@::ffff:127.0.0.1 *@127.0.0.1
On restarting the ssh daemon other users can't login by the terminal, but I can. However, NoMachine won't log me in. I get: NX> 502 ERROR: Public key authentication failed. As a server side check:
[code]...
I have trouble with rsa authentication:
I did create an rsa certificate with ssh-keygen using my root account on a client: ssh-keygen -t rsa -b 2048 no passphrase I did copy the rsa pub_key from my client to the server scp id_rsa sampleuser@sampleserver:/home/sampleuser/.ssh/authorized_keys
I did change the ownership to the "sampleuser" of the pub key file on the server: I trayd to connect:
ssh sampleuser@sapleserver
I get that: permission denied (public key)... I know I do smth wrong but I don't know what.
I am attempting to set up an automatic transfer via sftp using public key authentication. I have created a public/private key pair to connect to the remote server without using a password. I have also been able to use this key pair to login from the command line: sftp -vvv -oPort=<server-side port> user@server.Debug info from interactive command:
Code:
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
[code]...
I'm trying to write a p2p file sharing program using python's built-in libraries. Everything is going well. The only thing is that i'd like to be able to use openssl public and private keys so only a host with the public key could access/decrypt the filesharing. I've gotten these libraries (httplib, basehttpserver, ssl, os) to work using just a pem file containing both the public and private keys but no success with them seperately. Can someone point me in the right direction or offer an alternative? PS, the goal of the project is to create an anonymous, decentralized, secure file sharing program. I want to be able to upload this to sourceforge so everyone can use it, if that's any incentive
View 2 Replies View RelatedI run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
How can I forward all traffic from a public IP to another public IP. Let's say I have a first debian box named box1 with eth0 = 1.1.1.1 and eth0:1 = 1.1.1.2 and I want to forward all traffic from 1.1.1.2 to "box2" located somewhere else over the internet and having for eth0 2.2.2.2 Both 1.1.1.0/24 and 3.3.3.0/24 are public IP ranges.
View 1 Replies View Relatedls -al ../public-back
drwxrwxr-x 4 apache apache 4096 Apr 19 03:32 templates
ls -al ../public-back/templates
drwxrwxr-x 2 apache apache 4096 Apr 19 03:33 content
[code]....
How do I move the contents of /public-back/templates recursively with permissions into /public/templates ?
The 'Public' folder in my home directory keeps being recreated, after I keep deleting it. Is there anyway to make it go away forever?
View 2 Replies View RelatedI was wondering if there is an easy tutorial and/or explaination on how to create Public SSH Keys. Most of what I found is hard to follow and I would need to create on to join groups with the Fedora Project.
View 6 Replies View RelatedI want to configure SSH key-based authentication and SSH password Authentication in same machine for different user .
View 1 Replies View RelatedOn Ubuntu server 10.10, with a relay smtp server with authentication via postfix; I keep getting 535: Incorrect authentication data. I'm sure my username and password is correct. Heres how I set up postfix: I created a file called smarthosts.conf in my /etc/postfix/ directory that contains the following:
[Code].....
my server uses plain text authentication on port 25. I would like to use security like SSL, but this particular server is unsecured.
As waht it says above. I can't access public wifi as any browser on every single distro i've tried (15+) won't load just stuck in perpetual loading. No error message or nothing.
Also the browser wouldn't work until i disabled ipv6 in about:config. All browsers do this. is there something i could do to disable it completely so i have a browser choice?
Public key for ucs-miscfixed-fonts-0.3-5.fc13.noarch.rpm is not installed. Got this after upgrading to 13.
View 6 Replies View RelatedI wan't whatever file/folder that ends up in the public folder to automaticly be open to whosoever access that folder. Right know I have to "chmod -R 777 file/folder.* "
View 4 Replies View Relatedi have a requirment for giving my ip address a domain name.
can i esteblish a server as dns provider so than i can give a domain name for my own ip address.
i want to give it public not in local network.
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies View RelatedI need to make a choice on what authentication protocol I want to use for Authentication and Authorization. I was looking at Radius and then literature suggested that Diameter was a better protocol. Keep in mind I need this on a hetrogeneous setup ( linux & windows together). Diameter seemed like a good fit until I discovered that the open source code no longer seems to be maintained ( C/C++).
I was also looking at Kerberos as an option though there is alot overhead with the server. SSL/TLS or EAP? I am looking for simple but secure and am new at the security protocols.
