Red Hat / Fedora :: Data Transfer From RHEL4 To USB HDD With NTFS
Feb 23, 2010
I am using rhel4 with kernel 2.6.9-55 ELsmp. I have recently purchased 250gb seagate portable usb HDD. I have already mounted the usb HDD by updating Kernel with mode 755 and root user. I can transfer file from usb HDD to rhel system. But I am unable to make directory or copy file from rhel4 file system to usb HDD with ntfs. It is giving error message of permission denied though the device having write permission. I have already installed ntfsprog-2.0.0 in root. But there is no improvement. Is there any thing I can do to transfer data from linux system to ntfs.
I am newbie to linux, I am dealing with Fedora core 13. I have already succeedded in building an ad hoc network and a WLAN network. My next step is to get some networking statistics such delay, throughput, etc. So, I need traffic to flow through the network for both multimedia traffic and bulk data traffic. How to send files between nodes on the network (I found commands ftp, rcp but do not know whether they are the correct choice for this). ID their any application to perform this?
Also, I want to perform some video streaming between two nodes to study the behavior of real time data transfer. Is thier any application to perform this?
I have a FC13 box that has both Gnome and KDE sessions installed.
I have noticed on the KDE session that data transfer rates are slower than when I use Gnome.
In Gnome, I can transfer files between my FC13 machine and my Ubuntu 10.04 pc at a rate of 6.5 MB/s (52 Mb/s if my maths is correct), but in KDE the rate is only 3.5 MB/s (28 Mb/s).
"ethtool eth0" shows my NIC speed as 100 Mb/s. Obviously I am not hitting anywhere near that speed in either session, (a separate article may be happen in the future to address that), but I am curious as to why KDE is that much slower for file transfer.
I'm actually not a Linux newbie, but I'm DEFINITELY no expert either... I'm trying to copy all my data(approx 50 GB) from a usb drive(western digital 250GB) with ntfs partition in one go... The problem is that it only fails for big transfers... works fine for smaller transfers like 1Gigs or less... I have just one internal hdd partitioned into two ext3 partitions.. so I have sda1(Primary.. mount pt /), sda2(swap) and sda3(mount pt /piyush)... The usb drive comes up as sdb(sdb1).. just has one ntfs partition... I've also installed the ntf-3g drivers.... but doesn't seem to work... I've also noticed that when the machine hangs and I try to shut down, it fails and I get a message again again... (sdb1- no sense detected) or something like this... don't remember the exact message... will post the exact one if no one is able to figure out what's wrong...
i 've been using fedora 14,15 for like few months and i still have a 4GB NTFS partition win XP pro.i have installed fedora in about like 20gb for root and home ext4.i rarely use win xp nowadays (once in a week) considering i was using windows for like years.i have a commondata partition of about 130GB NTFS.i now dont want to use the windows and i want to convert the 130GB NTFS to ext4, but i am worried that if somehow at some point i crash my partition tables and i was using ext4 i wouldn't be able to recover the data as easily as i would in a windows.i want to know whether there is a reliable ext4 data recovery tool for fedora?igoogled and i found this link .. if any of you guys have used these tools can you share the experiences ?Mondo RescueTestDisk safecopy PhotoRecddrescue
I am trying to move over 1 Terrabyte of files from a two terrabyte drive into my Ext4 drive where Ubuntu 11.04 is installed. The two terrabyte drive is where my winxp used to be and it's currently paritioned into three partitions. I would like to reformat into a single partition that's why I'm moving the files.
When moving the files from the 2Terrabye NTFS partition into the Ext4 partitioned drive, the best transfer rate I could get is 11 megabytes per second. When I transfer from one NTFS drive to another NTFS drive, I could get as high as 70megabytes per second in WinXP. Is there a way to speed up the speed transfer?
Otherwise, the file transfer dialogue says it would take 26 hours to move all the files!!!
Edit: both drives are internal drives connected via a sata II.
Recently I had a situation where I had to transfer data from a PC to a Mac. Usually we simply convert the data as necessary, ie. bookmarks, contacts, etc. move the info to a dropbox account and use Windows networking to access the dropbox from a Mac. Well, there was a network issue and it was suggested that I boot to Ubuntu and do this. We do have Ubuntu on a flash drive but I was lost from there. Can anyone point me in the direction of documentation or assist me in understanding how this would be accomplished? I have a Mac, PC and Linux box at home so hopefully I have all the necessary tools to test this out.
I am quite newbie with Linux networking and I want to know if there exist a log in Linux where errors during transfers are stored. I mean, when I'm transferring data between two hosts is there any way to log somewhere (where?) the errors or warning during the transfer? That is, connection failures, TCP or UDP errors, etc.? Is there any "log level" to select the errors to be displayed in the log not to work with a huge log file?
I'm going to be needing to copy over 2 terabytes from one drive to another in a couple of days and I need something that I can use to transfer the files with CRC checking. Something comparable to Teracopy in Windows.
Open Source is an absolute must. I'm running on Debian and getting away from Windows to get away from all of the proprietary software. If it's going to be proprietary I might aswell just boot back into Windows as far as I'm concerned.
Some of the features that would be nice but not needed
-GUI (preferably gtk) -Pause/Resume (it's going to be a long transfer so it would be nice.)
Those would be nice but CRC checking is an absolute must have for so much data.
How can I transfer data from one user account to the other? I wish to delete one of the accounts but before that I want to transfer all the data in that account to the other account so that my data is saved.
I am running ubuntu 10.4 lts desktop and ubuntu 9.10 server with the gui active. On both of these machines the data transfer rates over usb and lan have slowed down quite considerably. Also over multiple devices, not the same hardware everytime I try to transfer something.
For the past few days, i have been trying to fix a common error related to mtp devices such as creative zen. Because of the new updated libmtp8 library, it is impossible to transfer files into any mtp devices. However there is a fix that will remove this issue.
1. Get the older karmic version of libmtp8 from here: URL... 2. Install this package from terminal using: sudo dpkg -i libmtp8*.deb 3. Lock libmtp8 from the synaptic package manager, so it doesn't get updated. 4. Uninstall and then downgrade any mtp packages (through packages.ubuntu.com) that become broken after step 2 to the karmic version. 5. Enjoy.
i have got a laptop for the first time that i'll be taking to college. I have a lot of data on my PC which i want to transfer to my laptop. My computer has Lucid 32bit while laptop has 64 bit installed,Data is too much and transfering via usb drives will take a lot of time.. I do not know how to set up a network.
I need make the copy of my images system on the second PC. But I can`t transfer its data. It seems that the way to images is stored absolutly, for example /home/john/images/holiday. If the second user`s name is Marry, the way will be /home/marry/images/holiday and Shotwell don`t accept this.
I have a number of queries but will start with one. I presently operate 11.04 Classic (no effects). OS is NOT set up as dual boot. As I am considering purchasing a new Desktop, I am wondering what is the best way to recover such things as folders, Firefox bookmarks etc. for four users.
I do have a external HDD which I guess could be used for a possible backup if that is the way to go! The new computer will probably have Windows 7 installed with which I assume I would probably dual boot.
I have installed Xubuntu 11.04. I want to see where when data is transfered by XUbuntu(through internet). In task manager i didn't find any such thing. In fedora there is system monitor where networking information is given to user where is such thing in XUbuntu. My main reason for asking such thing is that i have limited internet connection i don't want that Xubuntu update itself or any other such thing. you may also tell me how to stop updates of Xubuntu 11.04.
i am using NCTUns simulator and having problem while receiving message from an OBU. sending a message works properly but recving creates problem and fails. i am using exactly the same function as used by the developers in the demos but still no luck. i copy the code attch the screen shots to have a look
sendto() and recvfrom() are used for message transfer. they both return >-1 if they are executed successfully. please have a look in the screenshots. agentClientReportStatus is the built in packet format which im using here whose fields i filled manually are in the code below.
agentClientReportStatus *message,*mssg; int remainTime,n,n2,n3,i,sendingaddress,value; sockaddr_in cli_addr; timeval now;
I am doing a project where 2 clients connect to server and communicate (chat) and transfer data one after other using sockets. I have working code for this in C language. Now our main aim is to create a communication link where two clients transfer multiple streams data parallely. To be more precise i want to transfer images files and audio files parallel at same time, so is it possible to send data parallel using one socket connection?
For example I am copying data to USB-flash drive using some file manager. When the file manager shows that transfer is complete, flash drive indicator continues to light. As far as I know this is some kind of caching system...
1. Is it OK to close file manager when transfer window is closed but the flash drive indicator continues to light (data is still being copied)?
2. Is it better if I turn off this caching technology?
I build a new test machine where i need to bring data from live machine. the data is kind of flat files and some propreitary application axigen mail server.
now what i am suffering from, which commands to do first practise. there is remote site with 1mps speed of wireless between live and test machine. on daily basis aprox 14gb .tar.gz files it need to move it.
i found scp,rcp,rsync,sftp etc. which is fastest way to replicate or copy to remote machines.
the data is on live machine /var/opt/application and on remote same directory too /var/opt/application
i try using scp it take aprox 8-10 hours to copy single 14gb file.
if possible where to see such commands logs results, if anything get down error discontinue while copying.
Is there an easy way to transfer Webserver data from one ubuntu install to a new one? I know I'll need to get the stuff in /var/www and (somehow) the Mysql data, but are there files elsewhere to get? Or is there a better way than trying to copy all the various files?
I bought a laptop today (Compaq Presario cq62) and loaded Ubuntu 10.04 on it. Everything has been running great, but the Wifi has been acting up. It connects to my router for a few seconds to a minute, and then stops all data transfer (although it still shows that I am connected to the internet). My other computers running Mac work fine. I took my laptop to another place with wifi, and it did the same thing.
The data transfer seems to stop when there is a lot going on. Whenever I try downloading new software, it gets to exactly 5% then stops. If I disconnect the wifi, and reconnect it works again for another minute. I may need to be walked through any terminal codes.
On that note, where would be a great place to read up on using Ubuntu (online book?)
i have a 200gb hard drive and im upgrading to a 1tb hard drive and i want all my stuff like settings and files on my new hard drive whats the best and easiest way to transfer all my stuff from the old hard drive to the new one