I'm using the Network Manager DBUS API for establishing a wireless network connection. For some unknown reason , only the code for establishing a wired network connection is available. I've tried everything i can to get it running. but i'm not able to. here is the code that i'm using right now.
Code:
I am trying to set up, I am having problems understanding what steps I need to take but have done the following on recommendation of help from linux forums but am not getting anywhere with what I have done. PC:
Laptop Dell latitude D610
Ubuntu Gnome 2.26.1
I currently have a wired connection to my laptop but am trying to set up wireless, I have put the antenna on the router and have a wireless network showing called NETGEAR, amongst others, which is my primary router name so i'm trying to connect to that but the actual wireless antenna is on the switching hub. For all intents and purposed assume I am a complete newbie with ubuntu and linux command line stuff, I know basics like pwd, ls and so on but need a good bit of help trying to do this. When I click on this wlan network NETGEAR I get asked for the password, on the bottom of the switching hub is a code for WLAN and I put this in, it then asks for a password for a default keyring, which I do not know. How do I find this out?
But I am still not sure what I am supposed to be doing or looking for to resolve this connection problem, not only am I not a network expert I have no knowledge of linux either and steps to follow to establish a connection.
[Code]....
I'm trying to connect to a hidden wireless network in ubuntu through the terminal but i am unable to do so.
I first tried using ifconfig,iwconfig and dhclient initially but i am only able to get an ip address without the default gateway and dns server addresses which i normally get through the network manager applet.
Then i tried using cnetworkmanager but failed miserably again i keep getting this error
Code:
Another applet is running: Bus name already exists: org.freedesktop.NetworkManagerUserSettings (pid 1851)
Then i used nmcli available with the network manager package. i was able to establish a connection only with the connections showed in the list. i use a hidden wireless network. i am unable to connect to the hidden wireless network using nmcli without actually creating a connection from the network manager applet.
I installed ubuntu Karmic Koala 2 weeks ago, and while I have been able to connect to my school wireless, I have not been able to establish a PPPoE connection (username and password).After my most recent try, following this guide:-karmic.htmlMy wireless connection has gone as well.My network manager applet shows my school network, and shows that it is trying to connect, but it cannot establish a connectionand i apologize in advance for any information that i am lacking. please let me know, and i'll try to get the information.I'm running ubuntu on a separate partition, alongside windows XP home.
do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
I'm using OpenSuse 11.1 (but it applies also to 11.0) on a Dell XPS, NetworkManager and scpm to manage profiles. I configured wireless network without problems and all runs perfectly. The annoying problem is that the wireless connection doesn't start at boot. Also by clicking on the NetworkManager applet networks are not displayed
But, as soon as I launch network configuration from Yast without do anything other, magically the wireless network is recognized and the PC connects to it.
It seems that the network configuration from Yast activates NetworkManager to connect or it activates the interface or the hardware.
I have problem with my wireless GSM connection , my notebook has built-in Toshiba (in fact Ericsson) F5521gw wireless modem , it is detected and usable by default without installing additional software.Problem is that I can connect flawlessly only once after switching on notebookif I disconnect manually I'm not able to connect again, i have to reboot my computer or another solution which allows me to reconnect is closing and opening lid (putting notebook in suspended state)I'm using Toshiba Tecra r850, openSUSE 11.4 x64 on Gnome 2 DE, using NetworkManager and nm-applet /var/log/messages after using disconnect from nm-applet:
Code:
Sep 8 17:04:39 linux-b5nl pppd[9933]: Terminating on signal 15
Sep 8 17:04:39 linux-b5nl pppd[9933]: Connect time 243.2 minutes.
[code]....
I have a wireless connection to the internet, as well as a wired connection to a local network. When the wired connection to my local network is enabled, the wireless connection to the internet no longer works until I disconnect the ethernet cable.
(This setup used to work just fine when I was using Windows, but now doesn't seem to work. I wasn't using IP aliasing in Windows, but I am now, which may be causing the problem.)
My original connection to the internet was a wired one, at eth0, so once I got wireless enabled (on eth1), I created an IP alias to my local network of eth0:1 which is a static IP on my local network. The only configuration I did at all was to add a file named /etc/sysconfig/network-scripts/ifcfg-eth0:1, with the following contents:
Code:
And NetworkManager just seemed to pick it up automatically - I didn't change anything else in NetworkManager or anywhere else.
(Also I use 'service NetworkManager start/stop' entirely rather than 'service network start/stop' to manage my connnections. i.e. I did 'chkconfig network off' when setting everything up initially.)
The symptom is that NetworkManager repeatedly ask for password to connect to my AP.My AP is secured with WPA-PKI. The problem even happens with Fedora 11 live cd if I'm not quickly configure wireless connection using NetworkManager right after Fedora completes booting up. It means if I promptly configure wireless connection, i'm still able to access Internet. Same thing happens for the first boot of Fedora from hdd. For the second boot or when I dont quickly configure wireless connection when system finished booting up, NetworkManger repeatedly asks for password for AP.
I did try several approaches posted in this forum but problem still persisted. Some of approaches I tried are:
[Code]....
I'm trying to setup PPPoE connection to establish my DSL connection, but I got
Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.
When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?
I just got an error message and i have no clue what it means.Error: Unable to establish connection with FAM.Do you have "FAM" or "Gamin" installed and running?I installed the net cd of Lenny and it is up to date so I don't know whats up.
View 2 Replies View RelatedWhat I have:
Computer: Dell XPS M1210
Modem: SpeedStream 51000 - It's SBCGlobal
I followed the pppoeconf setup instructions.
cracker@Jack:~$ sudo pppoeconf Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
I then asked it to start the connection.
cracker@Jack:~$ sudo pon dsl-provider
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
Checked connection information and got this.
cracker@Jack:~$ ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:18:8b:dd:6e:cb
inet6 addr: fe80::218:8bff:fedd:6ecb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
I have set WAN to 'bridged' mode for my D-Link DSL-G604T so that individual devices can connect directly to the internet.
A problem I now face is not being able to connect a computer running Ubuntu 10.04 LTS to the internet via DSL.
The computer connects to the D-Link DSL-G604T router via wireless network connection - which is established, but I am unable to connect to DSL and I don't know why. The DSL connection doesn't even list under the network icon at the top right.
I just set up vsftpd, from the localhost it works just fine, but when i try to acess it from the network, via firefox or the osx "connect to server" i get a message can't establish connection.
I 'm a new to setting up servers, so maybe i just havent set any neccessary paramters for anonymous login.
My vsftpd.conf looks like this:
Code:
Working in CentOS. Want to have drag-and-drop SCP access to another system.
Opened up the file manager (nautilus) and went under File -> "Connect to Server". Filed in the information, hit connect. The connection will sit forever and will never properly establish. It creates an icon on my desktop, but noting else.
If I go into terminal, su to root, open nautilus and then repeat the process as a root user, then it works successfully. Connection established after I trust the remote host. File transfer works fine.
what is occurring when I attempt to connect as my normal user?
I am trying to establish an ssh connection to my server. I have a regular ssh connection working through the command line, so I know my key works and I have the port forwarding on the router correct.
When I go to Places -> Connect to Server the window comes up properly. The only problem is that the drop down menu only has one option in it for Service Type. It is Custom Location. I have had this set up in the past and there were other options there. I chose the ssh connection and everything was fine. Now it doesn't work.
I have tried to completely uninstall nautilus and reinstall it, but that didn't work. When I did uninstall it, I uninstalled gnome-session as well, and I reinstalled that one too.
I've got an Expect script that establishes a ssh connection to the iLO interface of a server. Problem is it drops me back to the local terminal and I can't enter commands to be executed on the remote host. How do I get it so it logs me into the server then leaves me connected to it?
Code:
expect -f - <<-expect_script_end
spawn ssh -o StrictHostKeyChecking=no $user@$host
match_max 100000
expect "*?assword:*"
send -- "$pass
"
send -- "
"
expect eof
expect_script_end
The ssh server running on the iLO interface appears to be sending eof's which is causing expect to exit. How can I get it to ignore them?
I'm using Ubuntu for almost two years and everything has worked well till now. One day I have reinstall ubuntu in my computer, but then something went wrong. I couldn't anymore establish my internet connection. I have tried everything but nothing helped. I even reinstall my ubuntu multiple times but there was no efekt. Even when I installed Kubuntu or an older Ubuntu 10.10, there was no internet. I'm also using Windows 7 but there is always a internet connection. I didn't change any hardware on my computer, only a new AMD graphic card. I'm using wired optical Internet 10/10 MB.
[Code].....
I am trying to install tomcat (apache-tomcat-6.0.24) on a Redhat machine.Post installation, I find the url: working fine untill I click on 'Tomcat Manager' where it gives me the following message: Failed to Connect.Firefox can't establish a connection to the server at localhost:8080.Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
Since a few days ago, I have too much problems to connect.When I try to connect to Internet with Firefox, the following message is printed out (, most of the times):Code:Unable to connect Firefox can't establish a connection to the server at URL...
View 9 Replies View RelatedDual boot Vista Basic and Ubuntu 10.04 on low spec PC. I can connect to the wireless when I am next to it. I move to the room where the computer is normally used and I lose connection. I can still see it but it fails to establish a connection. Okay, sounds like it's just too far way but when I re-boot and use Vista, it works fine (1 or 2 bars, but it works). Is this a driver issue? Anything I can do apart from move my wireless router?
View 9 Replies View RelatedGetting an error while connecting to remote desktop using rdesktop.
View 3 Replies View RelatedI have just installed Google Desktop. When I do a search it says: Unable to connect Firefox can't establish a connection to the server at 127.0.0.1:38552.
View 3 Replies View RelatedI am kind of new to linux and have installed the lucid lynx ubuntu distro (10.04) and then "upgraded" it to ubuntu studio but it still says is the lucid lynx. I got a Samsung Q430 laptop with the Atheros AR9285 wireless adapter.I have everything up and running EXCEPT my wireless card. The wireless card DOES work, it does see all the connections available, but when I choose to connect it does not, and keeps asking for the password.
Weird thing is that when I use my samsung galaxy tab as the wireless adapter for its 3G signal, it does seem to work fine (although really slow). I have tried looking for a solution, some say to just install the drivers, but ubuntu does not recognize anything to need a driver except the video card. I have installed linux-backports-modules-wireless-lucid-generic I have also tried the bleeding edge drivers.
After a while of experimenting by myself I came with the following, somewhat rudimentary. I managed to fix the problem by installing the windows wireless driver utility. Here is a tutorial on how to do it. So I just installed it, went to system/administration/windows wireless drivers and just installed it. Downloaded the file from here [URL]. It may not be the best way to fix it, but it does work. Still if you can use ethernet, don't hesitate to do it.
I want to transfer files from my laptop to my desktop remotely over the net. Both these computers access net via different service providers and have dynamically assigned IP addresses. If I know the IP address, I can use ssh to accomplish my task. However if I don't have physical access to the desktop, I cannot know the IP address. Is there a way by which a the desktop sends its public IP address to me so that I can establish ssh connection ?
View 2 Replies View RelatedI've installed apache application server v7.I get a problem when I type the command localhost:8080
Unable to connect Firefox can't establish a connection to the server at localhost.
# ps ax |grep tomcat
9463 pts/2 S+ 0:00 grep tomcat
I have a new clean Kubuntu just installed. I have a wireless router (access point) that I used to connect to internet in Windows 7. I plugged the internet cable into the router, connected computer to wireless network, created a new broadband connection using login and password given by the provider, and internet connection worked. I want eventually to have the same on Kubuntu.
Here are the ipconfig output from Windows with the working internet configuration:
Code:
I want to have the same thing on Kubuntu, but before that I want to be able to have at least the direct cable connection working. Had no problems setting it up on Puppy Linux, but fail in Kubuntu. Wireless connection with the router is no problem, it worked right away.
After plugging the internet cable to the network card I have this:[url] I tried to set up new wired and dsl (not sure which I need, probably DSL as it has the login and password) connections in the Network Connections window but nothing works.
Below are some internet configurations that I guess are needed:
Code:
when sending a message some recipients get it while others don't and i receive this mail every time an e-mail has failed to be received by others:
[Code]...
t "Failed to Connect Firefox can't establish a connection to the server at127.0.0.1:3580." when I try to open a Help File of one of the applications I have.My /etc/hosts file has its entries right:127.0.0.1 hostname.hostdomain hostnameMy firewall is also disabled.
nmap -sT -O localhost
gives me (I have included some):
2401/tcp open cvspserver
[code]....
I have had long term access to a networked HP Photosmart printer but now I get the following message:
Unable to open device hp:/net/Photosmart_C5100_series?ip=192.168.0.161.
when trying to access it.The ubuntu desktop is wired to the router as is the printer and another iMac wirelessly can still print to the HP. HPLIP status shows the icon for the printer but with a red x indicating no connection to it.The only recent network change was the removal of another router from our network. (service is DSL via a combo modem/router from service provider which previously was connected to a Dlink router which has now been removed from the chain b/c was redundant to the modem/router)