[Code]....
if the address of stWndClass is 403000h, WHY it would be compile as mov eax,[esi+403004] and the first one would be mov eax,[esi+4]? I know how to get the values 403004h and 4,but do not know why.
I am implementing c program to access ext3 file system's metadata. I want to know how to access members of the in-memory superblock structure. I am able access on-disk ext3_super_block structure but dont know how to access in- memory structure and its members.
View 1 Replies View RelatedI have a C code and assembly (nasm) code and I am not able to find how to link them each other. Here are the codes :
NASM side:
Code:
global_maxofthree
section .text
_maxofthree:
[code]....
I am using ubuntu 9.10 and my NASM version 2.05.01 compiled on Nov 5 2008.
Could you please explain the relationship between the languages?For one, is C writing assembly when you compile, does every piece of code end up assembly/hex? Is there a way to convert (?port?) between them?I don't understand much at all of them yet, but I've seen examples where it looks like they are interacting, and an understanding of all of them looks to be important?
View 12 Replies View RelatedI can't figure out why I'm getting seg fault in this program im making in c++. The program is of the game "Mastermind" board game which I'm sure many of you might have heard of.im fairly new to coding c++. I do not know why I'm getting seg fault error when trying to compile as I'm not using any pointers? or trying to access memory that was not allocated to me?
View 5 Replies View Relatedi wanna use chmod() in linux x86 [debian 3.7.2 x86] but i have some problem in function argv
look at this function:
Code: Select all int chmod(const char *path, mode_t mode);
and mode_t modes:
Code: Select all S_ISUID (04000) set-user-ID (set process effective user ID on
execve(2))
S_ISGID (02000) set-group-ID (set process effective group ID on
execve(2); mandatory locking, as described in
fcntl(2); take a new file's group from parent direcق
tory, as described in chown(2) and mkdir(2))
[code]...
i know there is some problem in ecx and mode_t value/
Looking for code to add 5 numbers in assembly? I want to use array for input of those 5 numbers. No problem if the output is 1 digit(0....9).
View 3 Replies View RelatedI've been converting some C code to assembly for my homework; it was going well but I'm having trouble with a for loop for hours. I could not understand where is the problem and decided to ask. I'm posting the part where I'm having trouble of my C-code and assembly-code; every other part of codes act same and the variable values are same. I'm waiting this two codes to act same, but they don't.
Code:
mov ebx, [result]
mov eax, [i]
mov ecx, [ebx+eax]
mov [j], ecx
mov [ebx+eax], byte '.'
_loop:
mov ebx, [result]
mov eax, [i]
inc eax
mov cl, [ebx+eax]
cmp cl, 'Z'
je _continue
mov ebx,[result]
mov eax,[i]
inc eax
mov ecx, [ebx+eax]
mov [k], ecx
mov ebx, [result]
mov eax, [i]
inc eax
mov ecx, [j]
mov [ebx+eax], ecx
mov ecx, [k]
mov [j], ecx
inc dword [i]
jmp _loop
_continue:
Code:
j=result[i];
result[i]='.';
for(;result[i+1]!='Z';i++){
k=result[i+1];
result[i+1]=j;
j=k;
}
i'm a bit stuck playing with the following class setup for glut. The actual issue is with the function pointers.Basically the following code is the opengl redbook cube example slightly modified.
View 2 Replies View RelatedI am developing a system in Python that includes an engine and multiple front ends. I am doing the engine and a curses front end together and will add additional FE's later. My problem is that I don't know how to get my front end to import the modules from the engine. I have them set up in Eclipse (using Pydev) as separate projects, but in the same workspace.
I've been a developer for years, but this is my first Python project, and I'm also fairly new to Eclipse. I guess my question is, How do I set up the references to other projects of my own making?
I'm reading "Understanding the Linux Kernel" and came upon this assembly instruction:
movl $(__KERNEL_CS << 16), %eax
I am curious as to what "<<" means/does. I tried to gooogle, but google doesn't search for "<<".
does the assignment operator copy all the members also for structures containing STL objects strings,vectors,vectors of vectors...)? I did try it on my platform,and it works that way (copying all the fields),but i was wondering if it is a standard behavior or not.
View 2 Replies View RelatedI have read where C is first converted to Assembly before its final compilation to binary. Is there a way to do this with Bash commands? I would like the understanding that Assembly allows to Bash somehow.
View 14 Replies View RelatedI am trying to learn assembly using nasm as assembler. I did not found example related to string operation. I had following example code,
global asm_strlen
section .data
section .bss
section .text
[code].....
my problem is at highlighted line, I am not getting how to copy a byte into 4 byte reg. rather what is syntax of mov instruction to mov byte to WORD DWORD etc.
I'm trying to math all class references in a C++ file using grep with regular expression. I'm trying to know if a specific include is usuless or not, so I have to know if there is a refence in cpp. I wrote this RE that searches for a reference from class ABCZ, but unfortunately it isn't working as I espected:
grep -E '^[^(/*)(//)].*[^a-zA-Z]ABCZ[]*[*(<:;,{& ]'
^[^(/*)(//)] don't math comments in the begging of the line ( // or /* )
.* followed by any character
[code]....
Well, I can get patterns like this:
class Test: public ABCZ{
class Test: public ABCZ {
class Test : public ABCZ<T>
[code]....
I was following a simple tutorial on how to program and compile a hello world program using assembly when I got this error;Quote:ld: i386 architecture of input file `hello.o' is incompatible with i386:x86-64 output.The tutorial told me to make two files;Quote:hello.asmsection .data;section declaration
msg db "Hello, world!",0xa;our dear string
len equ $ - msg ;length of our dear string
section .text;section declaration
[code]....
How do you malloc a struct in C? I have a structure of the form:
Code:
typedef struct child_req_to_parent
{
[code]...
I have a struct (small instance so not using code brackets )
struct random {
int a;
int b;
}example;
What i am trying is
example={0,0};
and it gives an error how to initialize all the entries within a struct to zero? In the above example i have used integers but what if they are some other data structure for example another structure?
I am learning Kernel Programming these days I came across a structure
Code:
static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
{0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
[Code]...
I have started learning C and am following Ivor Horton's "Beginning C - From Novice to Professional". I've noticed that in the book the structure of the main function is:
int main (void) however on the internet I found a lot of cases: void main (void)Which one is preferred and why?
i am having two small issues with a function i have made.sorry if it is a mess, i am still learning bash.the first is calling the nonpersistssh function (second line) and assigning the return value to nonpersistdiag.the function returns 1, but nonpersistdiag seems to only contain 0. i am unsure on how to proceed.the second problem is the nested else clause on line 10. it is a syntactical error. how would i declare it correctly?
Code: function endsession(){
nonpersistdiag=$[nonpersistssh]# a function that returns an exit code
sudo /etc/init.d/ssh stop; sshdiag=$?
[code]....
I have a mxn matric (which is my simplified way of saying it is RAM with bytes on it) Some of the locations on this metric is filled with some data and some places are empty. The mxn are very big numbers in size. I am trying to make a program so that if a system call wants to write some thing on empty locations on this mxn metric it should be able to do so without any problem. The thing which I want to understand or logic of a data structure is what data structure do you people feel should I be maintaining so that I can allocate the requested space immediately from the above mxn matric when some system call requests for some (k) number of locations from above metrics.
The logic initially I thought was to maintain a hashtable
1bytes requested----------> location 1,location 2,location 3.........location n
2bytes requested----------> location 1,location 2,location 3.........location n
3bytes requested----------> location 1,location 2,location 3.........location n
[code]....
but the problem with above logic is size of the pointers where I will be writing this problem is unsigned 64 byte.So to know location of one free byte if I am maintaining one pointer of type u64 this is not a feasible solution.
I wanted to implement a graph.By graph I mean to say that I am writing programs for BFS,DFS and other such stuff and want to see them in action. For this I started writing a program.The first entry point is to define a graph. I took a pen and paper and made a graph. Now to be able to code this in C.I defined a structure but I am finding problem in defining this structure. I looked into Google and came across incidence list and adjacency list representation [URL] after understanding that I am not able to understand how do I define my structure that would be a node in graph. Here is what my graph looks like
Quote:
|-----------31
| |
| 2---4---6---8
| |
[code]....
I am currently writing a program using raw sockets. This program is used to send out ARP reply frames. The problem that I have is that I do not seem to be able to fill out a structure that is pointing to part of a character array.
Code:
struct eth_header *eth;
struct arp_header *arp;
char buf[8];
eth = (struct eth_header *)buf;
arp = (struct arp_header *)(buf+sizeof(struct arp_header));
Whilst I can fill out the variables of eth, I cannot fill out the variables of arp. If I fill them out and then send the contents of the array using send to, only the first structure (the ethernet header) is sent out. The rest of the data appears to be the original junk data in the array. I have checked the address of the structure pointer and it is pointing to the right place in the array. If I write a raw sockets program that uses an IP header struct and TCP header struct I can point these into the array and write to both of them without any issues.
The difference here is that the call to socket is different:
Code:
/* For ethernet */
fd = socket(AF_INET, SOCK_PACKET, htons(ETH_P_ARP));
/* For IP */
fd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW);
If I just create one structure containing all of the variables needed this gets around the issue, however, I would like to know what I am doing wrong in the first instance.
I can use hexedit to manually edit one or two hex values in a binary file, but if I want to change many of the, this is impractical. Is there any tool that will take parameters like Code: someTool filename byteNumber replacementByte ?
View 3 Replies View RelatedThe idea is to make a website to check the availability of domains and it works but its not pretty yet. Below is what i have till so far:
## this is the API from my domain registrar.
<?php $client = new SoapClient('http://api.sync.com/?wsdl');
## I have a search box that sends the request to this page
$var = $_GET ["s"];
## remove the most common subdomains from the request.
$var=eregi_replace("www.", "", $var);
$var=eregi_replace("mail.", "", $var);
$var=eregi_replace("ftp.", "", $var);
$var=eregi_replace("pop.", "", $var);
$var=eregi_replace("smtp.", "", $var);
## remove any TLD extension from the request.
$split = explode(".", $var);
$main = $split[0];
$arraysize = sizeof($split);
for ($x=1; $x<$arraysize; $x++) {
$tld .= "." . $split[$x];
}
## login to the API
$paramLogin = array('handle' => 'randall', 'password' => 'password');
## match the domain with any possible TLD
$varcom = $paramAvailDomain = array('sld' => $main, 'tld' => 'com');
$varnet = $paramAvailDomain = array('sld' => $main, 'tld' => 'net');
$varorg = $paramAvailDomain = array('sld' => $main, 'tld' => 'org');
$varbiz = $paramAvailDomain = array('sld' => $main, 'tld' => 'biz');
$varinfo = $paramAvailDomain = array('sld' => $main, 'tld' => 'info');
$vareu = $paramAvailDomain = array('sld' => $main, 'tld' => 'eu');
$varnl = $paramAvailDomain = array('sld' => $main, 'tld' => 'nl');
$varbe = $paramAvailDomain = array('sld' => $main, 'tld' => 'be');
$varde = $paramAvailDomain = array('sld' => $main, 'tld' => 'de');
$varcouk = $paramAvailDomain = array('sld' => $main, 'tld' => 'co.uk');
$varorguk = $paramAvailDomain = array('sld' => $main, 'tld' => 'org.uk');
$varname = $paramAvailDomain = array('sld' => $main, 'tld' => 'name');
$varmobi = $paramAvailDomain = array('sld' => $main, 'tld' => 'mobi');
$varin = $paramAvailDomain = array('sld' => $main, 'tld' => 'in');
$vartv = $paramAvailDomain = array('sld' => $main, 'tld' => 'tv');
$varcn = $paramAvailDomain = array('sld' => $main, 'tld' => 'cn');
$varws = $paramAvailDomain = array('sld' => $main, 'tld' => 'ws');
$varnu = $paramAvailDomain = array('sld' => $main, 'tld' => 'nu');
$varbz = $paramAvailDomain = array('sld' => $main, 'tld' => 'bz');
$varcc = $paramAvailDomain = array('sld' => $main, 'tld' => 'cc');
## this requests the domain.COM and domain.NET
$varcom;
$varnet;
?>
<div id="content">
## below prints the result
<?php
print "<html><body><pre>";
$result1 = $client->__soapCall('Login', $paramLogin);
echo "<b>Result Login:</b>
" . print_r($result1, true);
$result15 = $client->__soapCall('AvailabilityDomain', $varcom);
$resvarcom = var_dump($result15, true);
$result15 = $client->__soapCall('AvailabilityDomain', $varnet);
$resvarnet = var_dump($result15, true);
print "</pre></html>";
?>
<?php
## the returned array looks like this
Result Login:
Array
(
[code] => 200
[message] => Login succesful
)
array(3) {
["code"]=>
string(3) "200"
["message"]=>
string(20) "Domain not available"
["result"]=>
object(stdClass)#236 (1) {
["status"]=>
string(5) "TAKEN"
}
}
bool(true)
array(3) {
["code"]=>
string(3) "200"
["message"]=>
string(16) "Domain available"
["result"]=>
object(stdClass)#232 (1) {
["status"]=>
string(4) "FREE"
}
}
bool(true)
?>
## till so far it works
What I need to do is to make this ugly looking reply in to something more readable, basically if TAKEN print occupied and if free print its yours to grab. I have been struggling with the in_array function but i'm not getting anywhere close in getting it to work.
I have been reading the Wikibook on C Programming for quite some time and am up to the variable part. I did learn several new things, like that too many variables hog memory.
What I want to know is how to assign a variable to the keyboard (in the C/C++ family) as such that the user has to type it in.
I have the following snippet HTML code:
Quote:
<table id="profile">
<tr>...............</tr>
<tr>
<td width="40%">
[Code].....
How can pass values in args[0] and args[1] to Perl/CGI script?
I created a class which has to return an array. My problem is I need to return 3 entries per record for example:
Code:
array(
"2009-06-13", "John", "Doe";
"2009-06-13", "Paul", "Simon";
"2009-06-12", "Frank", "Herbert";
);
Can this be done? What is the syntax? Where is the documentation? If this can't be done, How would you return this to a class without using a DB?
I have a application in C++, and now I have two class. MyDialog is the class that main function launch. In MyDialog class there are four elements and when I click over theese elements, there is a MousePressEvent that launch other class, Touchpad class. So, in some moments, I have loaded two class. My question is, how can pass a value from Touchpad class to MyDialog class, when I close (destroy) Touchpad class. In a few words, is it possible to communicate values between class?
View 5 Replies View Related