I have a file that contains a couple of email addresses and I want to extract the usernames ( Letters before @ symbol ). How can I do that using sed/awk.
I know cut will work, but the current environment doesn't allow me to use cut command. I can use either awk or sed.
How can I add columns to the right of GtkTreeView? How can I add the menu to the right of the window? How can I change the position of the icon in the GnomeMessageBox to the right of the dialog? And how can I change the arrange of the buttons from right to left in GnomeMessageBox? and position of the icon on the buttons in the GnomeMessageBox?
View 5 Replies View RelatedSay I have a text file with10 columns. I need to reorder them based on a list of column numbers that will reorder them.
My problem is this:
If I want to cut out 5 columns (columns 1,2,3,9,10) in the order 1,10,2,9,3 then I have tried using:
Code: cut -f1,10,2,9,3 my_file.txt > reordered_file.txt But this just extracts the columns in order as if I used:
Code: cut -f1,2,3,9,10 my_file.txt > reordered_file.txt How can I cut these columns and place them into the new file in the order I specify?
While this might seem quite trivial, I will actually need to do this for a file containing ~14000 columns with ~12000 columns that I need to extract in a particular order.
Actually build a script which can monitor the "DateTimeHourMinute" in a data file.
I wanted to compare the "DateTimeHourMinute" from the 2nd column against "DateTimeHourMinute" on the 3rd column which located in the same line.
Below is the data sample:
I have a folder with only 24 files named <number>.dat (i.e. 4.dat, 6.dat and so on) where <number> is between 0 and 256. Each file has just two columns of data and nothing else.
I'm trying to combine all the second columns ($2) together. I've been fiddling around with getline and so far have
awk '{ getline ln < "6.dat" ; print ln" "$2 }' 4.dat
which takes file 4.dat and adds $2 from 6.dat, but I want a single command to take each $2 from every file and add them to (for example) 4.dat (having $1 from 4.dat is no problem). A command that takes every file in the folder and grabs $2 and places them in a common file would be ideal. Frankly I can work around if you combine both columns from every file.
I bet this is a Perl one-liner (or very simple python script).I have a tab separated files in which each row looks like:Unique_Eight_Character_Sequence [3 tabs] data1~moredata1~moredata1 [3 tabs] data2~ moredata2~ moredata2 ... dataN~.The output file should have each column converted into a row (with the unique character sequence copied in for the first column), and then each "~" replaced by a comma.
View 14 Replies View RelatedIs there any way to filter the output of a command based on the values on the output columns. For example i execute du -h on directory with many files. Now I want to filter the output based on the size (i.e. M or G or K ). The filtered o/p should contain only M(megabytes) or G(gigabytes) and also all columns.
20K ./fload/temp/20000101/Pam
15K ./fload/temp/20000101/NAVEX
29K ./fload/temp/20000101/Avenge
[code]....
I have a Perl script that has two arrays - they are related. I would like to print out the contents into two columns next to each other.
#!/usr/bin/perl
open(PINGFILE, </home/casper/pingdata.txt") or die " can not open file ";
my @totalfile=<PINGFILE>;
foreach $string(@totalfile) {
if ($string =~ m/(^1sping)(?=.*max))/) {
push(usecstring,"$string");
[Code]...
I have an array with 15 elements, and I want to break it down into three columns. When the array is split into a the three elements - however on the iteration, it does not conform to that structure.
Code:
#!/usr/bin/perl -w
use strict ;
[code]....
I've been hitting my head against a wall for awhile with this one:As the last part of some data analysis I performing I would to construct a matrix from a series of different files. These files have the format:
file 1 file 2 file 3
AAAAA .1 AAAAA .1 BBBBB .1
BBBBB .2 BBBBB .1 CCCCC .9
[code]...
In linux terminal; how can we get the number of rows ad columns from linux kernel? I tried from environment variables(LINES,COLUMNS) but, I could not retrieve them as my editor program is a child process to linux terminal process.
View 7 Replies View RelatedHow do I do this?The script below obviously dosn't work.
#!/bin/bash
for u in $(awk '{print $2}' user.txt)
for i in $(awk '{print $1}' user.txt)
[code]...
One text file with two columns in it, I need to iterate through the file and print the different columns each time
If I have a Query that returns columns where some of the values are NULL, is it possible to tell SQL to return all the NULL values as empty strings instead of the NULL datatype?
If the solution is vendor specific I am (unfortunately) using a Microsoft 2008 SQL server.
Example:
Code:
Select * from imaginary_table where id = 1
Might return:
Code:
Id: 1
Name:xyz
[Code].....
I have 2 very long files which are quite similar:
file1.csv:
Code:
file2.csv:
Code:
I need this output:
Code:
explanation:
If the fields 3 (serie) and 4 (modello) are identical, the lines of the 2 files should be "added":
Code:
If the fields 3 (serie) and 4 (modello) are different, just print the line of both files:
Code:
Is there a way to do this without reading the (huge) files with a "while read line" loop?
I'm writing a script and I have doubts on how to assign values to an already established variable. The value for the vatriable would be coming from a file with three columns. I'm using the awk command for this. Am I doing it correctly? which of the following two ways is the better one or if both are wrong which one should I use?
#!/bin/nsh
inputfile=$1
rolename=$2
[code]....
Each line of the file I am sorting is in the following format:
<url> <month> <day>
For example:
[URL]
I wrote the following to sort:
Code:
#!/usr/bin/perl
$in = shift;
chomp($in);
[code]....
The script worked fine for my small testing files, but failed in my input file. The input file is 18MB and containing more than 300,000 lines. The output will contains some lines like that:
url_one 10 1
url_two 10 1
url_three 10 3
url_four 10 1
Is that because my file is too big for perl to handle ?
The lines beginning with greater-than symbols are the sequence descriptors and the lines immediately after each descriptor with A-Z characters, dashes, and question marks are the aligned DNA sequences. The sequences are always the same length within a file and never span/wrap across more than one line.I am trying to write a script to remove positions in the sequences that are only represented by a -, X, ?, or N (these represent gaps or missing data). Also, if there is exactly one non-gap/missing character in a position it is also useless (there is nothing to compare it to) so I would like to remove those positions as well.
Position 5 (from the left) was removed because it was all gap/missing characters. Position 9 was removed because only one character was a non-gap/missing character. Position 10 was retained because there were 2 non-gap/missing characters.I'm really not sure where to start here. My first concern is I can't figure out how to tell awk to treat each character in lines not containing a greater-than symbol as a separate field. After that, I'm thinking I should use set up a counter to count the number of lines with gap/missing characters comparing that to the total number of lines not containing greater-than signs?
I have a folder named Pictures that contains a bunch of .jpg files. My problem is that they all have randomly numbered names, then there is a duplicate of the file that is random numbers then the letter a right before the .jpg.for example, there would be 123.jpg and 123a.jpg, where 123a.jpg is just a resized version of 123. What i'd like to do but have NO clue how to, is to have a script or something go through my Pictures folder, then copy the ones that end in a.jpg to a folder called Resized, and ones that dont have that to a folder called Originals. That way my Pictures folder will be in tact, and i'll have copies of them all separated out.I have to do this all through the CLI on a machine, maybe I dont even need a script and can just do it with a slick command?
View 14 Replies View RelatedI'm trying to do something here:: I'm writing a bash script, I want to [open a new terminal and run a bash command in it] inside the script. I tried to use this, but apparently I get syntax errors.
Quote:
#! /bin/bash
echo "echo Something" > ~/Second.sh
chmod +x ~/Second.sh
xterm -e sh -c ./Second.sh
OpenSuse 11.2 (64 bit)
GDB 6.8.91.20090930-2.4
I ran GDB on a program and am receiving following errors,
Code:
anisha@linux-uitj:~/junk> g++ -g jk.cpp
anisha@linux-uitj:~/junk> gdb a.out
GNU gdb (GDB) SUSE (6.8.91.20090930-2.4)
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later [URL]
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-suse-linux".
For bug reporting instructions, please see: [URL] ...
Reading symbols from /home/anisha/junk/a.out...done.
(gdb) b readline
Breakpoint 1 at 0x400b90: file jk.cpp, line 19.
(gdb) r
Starting program: /home/anisha/junk/a.out
Missing separate debuginfo for /lib64/ld-linux-x86-64.so.2
Try: zypper install -C "debuginfo(build-id)=591af1afa33f255704fb6a60859b93d00e205302"
Missing separate debuginfo for /usr/lib64/libstdc++.so.6
Try: zypper install -C "debuginfo(build-id)=62220ad5c8941afb5d332c0c47d32f8beec8ac50"
Missing separate debuginfo for /lib64/libm.so.6
Try: zypper install -C "debuginfo(build-id)=57fc1891d8d9f419fb8c7fc06a8285563b53a47e"
Missing separate debuginfo for /lib64/libgcc_s.so.1
Try: zypper install -C "debuginfo(build-id)=0206e11fa8ca0db0633073adcbf1349a7871e1dc"
Missing separate debuginfo for /lib64/libc.so.6
Try: zypper install -C "debuginfo(build-id)=c5a3dfd66bf61fcdec9bc22153b2fbd0d6697960"
can't open input file (null)
Program exited with code 01.
(gdb)
This is what I have:
Code:
#!/bin/bash
#ascript.sh
[code]...
Using: Open SUSE 11.0 64 bit, KDE 3.5.9 (release 49) and KDevelop 3.5.1. Problem: A singleton was created in subproject A, and so an object file is created in subproject A. In subproject B, I want to use that object file. We have not been able to find a way to link that object file created in subproject A with subproject B. Also, the subprojects are in different directories. We created a symbolic link to the ".h" and ".cpp" files in directory A. And the project compiles and links just fine after adding the symbolic link to the header and cpp files in subproject B. My concern is, that two objects of that singleton will be created. The whole idea of making a singleton is so that there is only one instance at a time.
View 8 Replies View RelatedI have two files containing list of packages using
Code:
dpkg --get-selections > file-name
command.
package-a.txt
[code]......
Now I would like to create a third file which contains only those packages which are present in package-a.txt but NOT in package-b.txt. The file should look like this:
Code:
package2
package4
Note: The world "install" is also to be removed for all packages. Using diff command I could get something like this:
Code:
temp# diff -yb package-a.txt package-b.txt | grep "<"
package2 install <
package4 install <
<
temp#
But not sure how to remove instances of "install" and "<".
I have a problem with snmp answers being empty or having spaces.
What I already have:
#get all interface indexes (if you wonder - I'm working for a cable company and different cablemodems have different number and types of interfaces):
The problem is the physical address which is sometimes empty and the description which has spaces. So I'm doing 2 snmpgets which is slower than 1 snmpget (sometimes I have up to 18 interfaces).
I'm trying to explain it a bit simpler.
Interface 5 gives me back the following lines:
Ethernet CPE Interface
Now the first line should go into variable ifadm,
2nd line should go into variable ifoper,
3rd line should go into variable ifspeed,
4th line should go into variable iftype,
5th line (which is empty) should go into variable ifphys and finally
6th line (which has spaces) should go into variable ifdescr
I'm trying to create a separate thread for my program which basically polls using the read command. However this new thread seems to block the main thread, anyone know why this could happen.
In main I call this function pthread_create(&mainEventThread, NULL, GenericEventThread, NULL);
which calls
/*New threads start function */
void *GenericEventThread()
{
short int i, nError = -1;
[Code]...
I've used pthread_self to check that a new thread is being created, so why is the while loop in one thread blocking the main thread from running, I haven't used the join function anywhere in my code.
I'm extracting data from a xml file writing it to separate files then combining the results as a csv file.The problem is keeping the separate files in sync line by line.When a grep does not action I would like to put in a blank line or something to keep the lines in order.When the "<title>" is missing as in as in the first"<programme </programme>" that's where I need somethingto write to the file as dummy data to increment the line
here's the data
Code:
<programme channel="15552.dvb.guide" start="20100504200000" stop="20100504204000">
<category>Show / Game Show</category>
</programme>
<programme channel="14498.dvb.guide" start="20100504200000" stop="20100504203000">
[code]....
I had been playing around with various Python scripts in order to add certain columns to Nautilus, in particular bitrate, length, artist and genre for information on mp3 files. Well, I got greedy and installed something I shouldn't have and now I have massive duplicate columns available, and checking them to be visible has no effect at all. I have lost all the information that would populate the aforementioned columns.
I went to the Configuration Editor, went to apps>nautilus>list view>default visible columns and deleted the extraneous columns. I also disabled all the pythons scripts I put in ~/.nautilus/python-extensions. The extra columns never go away, and, if checked, never make visible the named information. Here is a screencap.
I have been messing with a2ps in order to print a text file I have that has 130 columns by 80 rows per page. It appears that a2ps automatically scales the number of rows based upon the number of columns I try to print.The file prints properly for the columns but a2ps scales the rows to be 97 rows per page. So the 80 rows print but the next 17 rows are blank. It is not scaling the font for for 80 rows.
View 1 Replies View RelatedI am using xgraph with ns2. Is there any provision in xgraph to select columns. Man page didnt say anything about it.
View 1 Replies View RelatedI was trying to do a school assignment in LaTeX. The assignment involves having the page split into three columns: the first column is for the quote, the second is for a reaction, and the third is for questions. These columns must be able to break in the middle of a row. I was trying to accomplish this using LaTeX.
First, I tried the longtable environment, but that would not allow me to pagebreak in the middle of a row. Then, I tried parcolumns, but for some reason, the second "row" had a huge space between the first two words. Does anyone know of an environment suitable for this kind of work?