I've never really taken advantage of Linux being open source before but I was wondering how the copy and paste functions look like. So far I have found out that they are handled by the X Window System (by reading this thread).But I don't seem to get much further than that.
View 1 RepliesI am facing an amazing problem with GCC compiler. When I copy any C code from any documents or texts and paste at gedit and try to compile it with using GCC compiler, it gives error. But when I typed the same code, it executes.
View 6 Replies View Relatedi configured the build-essential(for c compilation). and I am unable to get the output.This is what i do.(check the image) Since i wanted to copy the output from one of the tty's I tried GPM service. But i dont know how to copy it. Some says click the middle mouse button and it will copy but when i do some code start running on the console. no copy paste. How can i run JAVA programs.
View 9 Replies View Relatedsince some days I have a strange problem with KMail (1.13.5) in KDE4.5.5. When I try to copy some text from an email and past it to any other program (e.g. Openoffice), not only the marked text will be pasted, but a kind of HTML code including the text.
This bug is not OpenSuse specific. I found the same bug in a Fedora mailing list (of course, whithout an answer): Strange Copy/Paste behavior in KMail 1.13.5/Kontact 4.4.8
Here is what I currently do and want to automate:
1) I manually enter a particular web site address in the browser.
2) When the page displays on my machine, it shows a number of links I need to visit, one after the other.
3) Each of these links display another page (file) from which I "cut and paste" information. I do this by highlighting manually the wanted info, click "copy" then select an open file on my computer, select "undo" if necessary to remove any previous content, click "paste" and then "save".
4) I then call a Yabasic program that reads the saved file and trims unwanted info.
5) At the completion of the Yabasic program, I click the web page tag, click the "back" button to return to the first page (since I am in the second) and click the next link in this first page till all links have been visited.
6) visit the next known web site and repeat 1 to 5
In an automated program, what I need to do is:
1) Visit the known page of the web site showing the links
2) save the page showing the links (the first page)
3) make a list of those links
4) visit each link one after the other and save its page from which I will programmatically (Yabasic) select info.
5) repeat 1 to 4
I can do this in "Yabasic" (which can issue Linux commands) or PHP although I do not know PHP much.the purpose of this is to associate towns and cities of the world with their respective political/geographical divisions and their respective time zone. This has to be done often because that data changes regularly.
I have this treacherous program in C which uses external static libraries (extern etc), and want to do a coverage test of it. The libraries are written in fortran. I compile like this Code: gcc -fprofile-arcs -ftest-coverage -o main main.c library.o I run my nice program like that
Code: ./main Then I do the magic stuff
Code: gcov main.c library.f
Ok 98% of the lines were used in main.c, and I get a file with line counts and all that. Great! But, I need to know the coverage in my library too! It says 0.0% and that's impossible. So what can I do? I can't run it like an executable because it's a library.
And why is the terminal not accepting my copy paste? I copy some lines from my IDE, then I want to paste it into the terminal (with ctrl-v of course, not some crazy local application non-standard counter-intuitive key combo made just to cause agony among honest users!), and that could've been the only problem here, but it isn't. I can't even paste with that right click menu. So, if I was crazy before, I went nuts after that. My great "solution" was to paste it into the firefox URL field (not the search field ) and then copy that and paste it into the terminal. Is that common practice for you all while dealing with that unburied DOS-window?
I've tried to use google to find this, and all I find is M$ SAL and some annotation standard for java, neither of which is anything like what I'm looking for.
I am pouring over someone else's source code, and want to be able to take notes on it, saving those notes in a separate text file that I can grep, open in a text editor, etc. I want each annotation line to include a line number (or range of lines) so it's easy to know what part of the code it refers to.
I could do this by hand, but it would be nice if a program existed to read and write such a file format. It could be similar to Kompare, only with editable notes on one side and source on the other, linked together with colored bands.
Does such a thing exist?
Cosme Zamudio and I are discussing a possible file format and an Android app - [url]
Where can I find the top command source code... I got it from "http://procps.sourceforge.net/index.html" but it seems for Solaris. where can I get the source code for top commend running on Linux????
View 3 Replies View RelatedIn particular i'd like to know where is the kernel source code in slackware 13.
View 2 Replies View RelatedDoes anyone have source code on Email parsing in C++
View 1 Replies View RelatedI found on the Internet a rough suggestion to debug code which says to add a line:
An example shows this lists the lines of source that do work.
I do not know where these lines are supposed to go and whether the "notdeadyet" should be a call to a subroutine or what. I only found that "%define" is used to link to external files, so I am confused because what I tried did not work.
(I am unable to use (and learn) any debugging tool for another few weeks and I'd like to progress on this If I can.)
I just want to see how the command line such as : "cat", "split", "ls"...ect source code ? Are they written in C or other language ? I don't know where to search those?
View 6 Replies View RelatedFor one of my class projects, we have to analyze a usb keyboard driver source code and be able to understand it and present it to the class. Me and a few other people are working together by breaking up the code into sections so each person can analyze a section of code.Now I've ran into a section of this code that I am a little confused about. It seems fairly simple but I just wanted to double check since I wasn't able to find a solid answer.
Code:
static const unsigned char usb_kbd_keycode[256] = {
0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
[code]....
I want to modify the source of cd (the 'change directory' command) to do a little extra for me, but I can't seem to find the source code anywhere.. maybe I didn't look for it well enough, and googling "source code cd" and variants of that doesn't exactly help... I was wondering if anyone knew where I could find the src?
View 14 Replies View RelatedWhere can I get the source code of quick thread?
View 1 Replies View Relatedjust installed ubuntu couple of days back on my netbook. I am still a beginner, enjoying my adventure exploring ubuntu. I have another desktop which runs on XP. I am able to access XP shared folders through my netbook(linux). However, i wanted to copy files from XP infact folders using TERMINAL in my netbook, not copy and paste using my mouse. Are there any commands for it?
View 1 Replies View RelatedI'm investigating how to copy a file located in my file system into another device. I googled to find a solution for my case but I didn't find anything. My original problem was to find a way to permit my code to move a file into a USB device. I wonder If is there a way to implement the cp command or some mechanism that permits my code to interact with between the file system on my computer and the second one on USB external driver (FAT32) ?
View 3 Replies View RelatedI have a problem in programing pseudo terminal. In the book APUE (advanced programing in the unix environment) in chapter 15.4: coprocess gives an example of using pipe to operate another program, that provide its input and read its output: Figure 15.18. Figure 15.19 is filter to add two numbers using standard IO. The author said that you must flush the IO buffer in the program which are operated through pipe by another program, however, we cannot add fflush to the source code and re-compile the whole program if we need to use it in another process. It said that pseudo terminal can solve this problem, but I have tried in fedora12 with forkpty call and fail. Source code as follows:
The main process:
Code:
#include "common.h"
#define LINESIZE 256
int main()
{
int fd[2];
pid_t pid;
if( socketpair(AF_UNIX, SOCK_STREAM, 0, fd)<0 ) {
perror("create socket error");
exit(1);
}
int master;
struct termios tm;
if( tcgetattr(STDIN_FILENO, &tm)<0 ) {
perror("tcgetattr error");
exit(3);
}
struct winsize size;
if( ioctl(STDIN_FILENO, TIOCGWINSZ, (char*)&size)<0 ) {
perror("ioctl error");
exit(4);
}
setbuf(stdout, NULL);
pid=forkpty(&master, NULL, &tm, &size);
if( pid<0 ) {
perror("create process error");
exit(2);
}
else if(pid>0) {//parent
close(fd[1]);
char line[LINESIZE];
memset(line, 0, LINESIZE);
while( fgets(line, LINESIZE, stdin)!=NULL ) {
write(fd[0], line, strlen(line));
memset(line, 0, LINESIZE);
int n=read(fd[0], line, LINESIZE);
if(n>=0) line[n]=0;
printf("%s", line);
memset(line, 0, LINESIZE);
}
} else {//child
close(fd[0]);
if( fd[1]!=STDIN_FILENO ) {
if(dup2(fd[1], STDIN_FILENO)!=STDIN_FILENO) {
perror("dup2 error");
exit(1);
}
}
if( fd[1]!=STDOUT_FILENO) {
if(dup2(fd[1], STDOUT_FILENO)!=STDOUT_FILENO) {
perror("dup2 error");
exit(2);
}
}
close(fd[1]);
if(execl("./add", "add", (char*)0)<0) {
perror("exec error");
exit(3);
}
exit(0);
}
//parent
wait(NULL);
return 0;
}
The add program reads a line and get two numbers and return the sum of them.
Code:
#include "common.h"
int main() { int n1, n2;
char line[256];
memset(line, 0, 256);
while( fgets(line, 256, stdin)!=NULL) {
sscanf(line, "%d%d", &n1, &n2);
printf("%d", n1+n2);
fflush(NULL); /*the program does not work without this sentence why?*/
memset(line, 0, 256); } return 0; }
running a java application in a remote site,and I would like to debug the application. I'm using jdb, and, due to network architecture, I can only use jdb do debug in text-mode. To debug in text-mode I use the command: jdb -attach remotesite: port. At this point this is ok. Now I would like to attach the source code to the jdb. I tried the command
jdb -attach remotesite: port ~/src/org/path/file.java
to attach the source code to the remote debug to. But it doesn't work. In jdb, I try the command use ~/src/org/path/file.java but it doesn't work either. How can I attach the source code to the remote debug?
please i try to compile the below code on ubuntu with g++ but i was getting an error message
fig03_05.cpp:10: error: new types may not be defined in a return type
fig03_05.cpp:10: note: (perhaps a semicolon is missing after the definition of �GradeBook�)
fig03_05.cpp:32: error: two or more data types in declaration of �main�
[code]...
I had made some modifications in the source code of a software called "HomeBank". I'm not able to make a setup file using "Inno setup".how to create an .EXE file for the source code to execute.
View 2 Replies View Relatedi am trying to generate a linux executable data (bin data) from my java source code.
View 4 Replies View RelatedI want to find a simple and quick way to permit my application to bring a file located in my file system and write it into an external USB device. I have to use Bulk Transfer Only mode that means to use stream of characters only. I looked through the LibUsb library using it in my IDE I can transmit a string. To transfer a whole file I suppose I've to dodge the file system building a char sequence that permits to recognise a file in the file system and to put it into the usb device.
View 1 Replies View RelatedI am doing a project on page replacement algorithms.... Can anyone point out the the source code for page swapping in linux kernel source tree.(I am using 2.6.31 kernel on a 32 bit x86 machine).
View 1 Replies View RelatedI have a .txt-file with ~50.000 lines of numbers, generated by a mathematics program. From this file, I need line ~ 1.100 to line ~16.000 (these lines are always the same btw, this may make the solution easier, dunno) to be copy/pasted to another file, where the lines ~500 to ~15.000 (also, every time the same) should be overwritten by the aforementioned lines...I haven't found or come up with anything that works yet, mostly I find solutions to copy everything from one file to another but I can't find something to specifically overwrite a part of a file with part of another.
View 4 Replies View RelatedI have read where C is first converted to Assembly before its final compilation to binary. Is there a way to do this with Bash commands? I would like the understanding that Assembly allows to Bash somehow.
View 14 Replies View RelatedI found a strange problem when I use gdb in eclipse to debug. When I step in the program, the register RIP(I'm using x86_64 machine and that's EIP in 32 bit mode) shows correctly but the line stepping in the source code may be far from the correct line. For example, when there is no loop in the source code, the RIP keeps on increasing and the current instruction pointer goes back to several lines back. I'm sure the source code is the right one because I when I checked the memory and local variables after several lines the values are all correct. The source code has many empty lines and does it matters with GDB?
View 3 Replies View RelatedI want to edit linux kernel source code in MS Visual Studio. I saw the code and these are c files but there is no project file that i open it and whole project opens up. I can open each individual file but not the whole project.
View 13 Replies View RelatedI have a Bash script that runs other bash scripts. If the parent code fails, is there any way for me to also kill the child code?That kills any multiple instances of a script if I run it more than once. Is there any way I can just modify this into something that prevents the child code from running/continuing from running if the parent stops from an error?
View 3 Replies View RelatedI would like to download and show a source of an webpage in stdout, but this is a https page with authentication form, which requires logging in. I tried like this:
Code:
wget -q --no-check-certificate --http-user=USERNAME --http-password=PASSWORD https://webpage.domain.com -O - However, it still downloaded only this login page, not the real webpage. Using the Firefox I can authenticate just fine. Any ideas?