I want to compare 2 IP addresses, so that I may compare which is more/less "specific" or "restricted" than the other. So is there any function/library that may help in doing this comparison in C (on Ubuntu 10.10)?
View 1 RepliesMy home directory's permissions allow only myself access to it. Is it possible to put a file inside my home directory with.. say.. full permissions, and create a symlink to it so other users can access that file alone inside my home folder? System is Ubuntu Karmic.
View 2 Replies View RelatedI have the following in my httpd.conf file
Code:
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive. Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80 Listen 80
And when I try to start the server, I get the following
Code:
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80. I did have an Apache web server up and running about 6 or 7 years ago - but seem to have lost everything
I have configured squid server and it is working fine. I want that only specific ip addresses in my LAN should be able to access internet and for that I have given these entries in access control lists in squid.conf file:
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443
acl Safe_ports port 80
acl Safe_ports port 21
acl Safe_ports port 443
acl Safe_ports port 70
acl Safe_ports port 210
acl Safe_ports port 1025-65535
acl Safe_ports port 280
acl Safe_ports port 488
acl Safe_ports port 591
acl Safe_ports port 777
acl CONNECT method CONNECT
acl QUERY urlpath_regex cgi-bin ?
acl apache rep_header Server ^Apache
acl our_networks src 192.168.0.181/255.255.255.0 192.168.0.182/255.255.255.0
And in http access I have given this:
http_access allow our_networks
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
http_access deny all
In this I want that only 192.168.0.181 and .182 should be able to access internet but Now the problem is that all the IPs in the LAN like 192.168.0.20 are also able to access internet. What changes I need to do to allow access to specific IP addresses. I am not using any firewall or iptables entries and i am manually changing in the firefox at client side to access internet.
I'm trying to limit access to port 8443 on our server to 2 specific IP addresses. For some reason, access is still being allowed even though I drop all packets that aren't from the named IP addresses. The default policy is ACCEPT on the INPUT chain and this is how we want to keep it for various reasons I wont get into here. Here's the output from iptables -vnL
[Code]...
Note the actual IP we are using is masked here with 123.123.123.123. Until I can get everything working properly, we're only allowing access from 1 IP instead of 2. We can add the other one once it all works right. I haven't worked with iptables very much. So I'm quite confused about why packets matching the DROP criteria are still being allowed.
I have two files
Code:
we have to consider here $5 , $6 , $7 for our search
file2.txt
Code:
Here we should take only $2 for comparison. As you can most of the $2 field records has value and some do not have value.
Question:I want to take the fields $5 , $6 , $7 from file 1 and compare it with $2 field from file 2. and the rsult should be like this:
Code:
The final output will look like this
Actual file1.txt (before running the code)
Code:
FIle1.txt after running the above said condition
Code:
So the field $5 , $6 , $7 should get replaced from the matched valued of $1(file1)
If I have a variable, say xvar, which can take both string and integer value and I want to perform an operation in following 2 conditions:1. Either xvar is null2. xvar equals 2[ -z "$xvar" ] || [ $xvar -eq 2 ] && <some-code>Doesn't seem to work if xvar takes string valuesI know that since I have no restriction on xvar, I can get away with string comparison in second test too, ie[ -z "$xvar" ] || [ "$xvar" = "2" ] && <some-code>
But, 'Sams teach yourself shell script in 24 hrs' says that [ expr1 -eq expr2 ], if either is string, it assumes 0 valueIs it true
I have two text files i want to compare the differances between but i dont wnat all of them, there is only about 30lines of relvent text i want to compare.
View 10 Replies View RelatedI would like to ask opinion from perl experts.
I want to compare 2 files and show the differences in a text file.
For example, if i open File A an B in notepad
File A:
File B:
Quote:
line3 is missing in File B
So if I did a File compare (line by line), the differences will be in line3, line4, line5, line 6.
But I dont want it to be like that.
I want it to be like this
Quote:
Can Text:: Diff able to perform the work.
have a simple script for comparing two directories. I want to list all differences between this directories.
here is my function for compare:
function comp
{
for i in $1/*; do
if [ ! -e "$2/${i##*/}" ]; then
echo $i
[Code]....
in my script these two files are equal(my script ignored last time modified)
I need a script which can format the below text file which contains comments
Code:
Code:
Output should be:
Code:
Code:
Script should compare the column name and paste the output in above said manner.
I have two arrays of data, called data1.dat and data2.dat. each contains 60 data. What I want to do is to compare the data in each file and write the counting into bins. It goes like this. First, take the first data in data1.dat file and compare with the 60 data in data2.dat file. If there is any data which is same with the data in data1.dat then it count in bin. The total bins are also 60. Next it goes to the second data in data1.dat and compare with all the 60 data in data2.dat. If there is any data same then it add in second bin. And it repeats to all the data in data1.dat
View 3 Replies View RelatedI've got a strange bug that I cannot figure out how to solve. Here is the function.
Code:
int getnexttab(char input[], int index, int length)
{
[code]....
I need to search a bunch of files in a specific folder for a specific number and add all the numbers together to a total sum. I use Rsync everyday, everytime I run rsync i get a logfile (rsync output) witch contains the textstring "Total bytes sent: xxxxxx".
The "xxxxx" can vary in lenght. I need to extract the "xxxxxx" from each file and add the numbers together to a total size over a week or a month. Is this possible? And I wish to only use bash. One way of doing stuff at a time my friends .
I have 2 very long files which are quite similar:
file1.csv:
Code:
file2.csv:
Code:
I need this output:
Code:
explanation:
If the fields 3 (serie) and 4 (modello) are identical, the lines of the 2 files should be "added":
Code:
If the fields 3 (serie) and 4 (modello) are different, just print the line of both files:
Code:
Is there a way to do this without reading the (huge) files with a "while read line" loop?
I want to replace specific character in a file after every specific line. example as follows.
O 000000000000000000
A 111111111111111111
C 222222222222222222
[code]...
I have been messing with diff and grep for 2 days now without result
I am trying to match a file consisting of words to many separate other wordfiles in a specific directory. one by one.
What i want the script to do is to report how many matching words my main file has with every file in the directory, each in turn
setup:
Each of em are plain text files with 1 word per line
Output should be something like:
SCRIPT REPORT:
have a file (called it A) contains;
hostname 192.168.23.65
hostname 10.18.13.253
hostname 10.18.16.253
hostname 177.23.56.58
how can i write a script to get only ip addresses & send it to 3 files with the following info. only:
file1:
192.168.0.0
file2:
10.18.0.0
file3:
177.23.0.0
by creating the 3 files then i will be able to set up subnetmask, gw,....etc.
This code uses ping to check connectivity to a remote location and logs it to a .html file which is then stylized by css..
Code:
#! /bin/bash
path="$HOME/Desktop/IP_Monitor" #Path to write out files
ALT="0" #For styling alternative row
[code]....
I need to add a feature such that instead of hardcoding the ip address .. it takes them from a list and makes new files for each ip address for logging.. And also when log files are completed , They should be compressed using tar. How should i go about adding both these.. This is my first bash script.
I Want to Develop Network Scanner Software. For that i need "Java Program to Display All IP Addresses in LAN".
View 3 Replies View RelatedI have for example the following IP addresses:
24.172.220.218
41.239.36.19
63.215.202.234
66.176.124.22
[code]....
How can I sort those IP addresses? I want to sort them using the first 3 numbers I also want to count the number of times that address is repeated This is a batch program.
I am new to linux and am trying to write a script that will ping IP addresses and say either online or unavailable.
View 3 Replies View RelatedI'm in the process of setting up a script in perl to make 1,000's of curl calls to my companies application on our test server. Our software does all sorts of tracking of data based on IP addresses using geoIP, so i was wondering if anyone knew of a way to fake these addresses to the server?I know a big issue with the IP faking is the return path but i dont really need this. I also cant do it on the hardware level since the script is going to be picking lots of different IP's at random.Anyone have any idea if this is possible and if so, are there any known libraries i can use for this? I prefer perl but any Linux compatiblie scripting language is fine.
View 1 Replies View RelatedWhat I am trying to achive is the editing of /etc/ssh/sshd_config I have the line
Code: AllowUsers usera userb
And I want to be able to append to the end of this line from a bash script.I have muddled together from other sites and got the following:-
Code: sed -e "s/^AllowUsers/� userc/" -i /etc/ssh/sshd_config
But this appears to add userc directly after AllowUsers and not after userb
I'm struggling myself with this problem: I have a file which contains a single column of data
2
.
.
.
45
[code]...
Is there a way to do it with awk?
I am loading variables for cXtXdXsX disk names into a script, and at present I have only accounted for there being 3 characters from c to t. I need to change it to a variable recognition so that it can count any number of charcters such as c1t , c10t , or c100t.
I can then take that information and use it with the following string to strip off the lead characters so as to make the 3 in $substr either a variable or redirect to multiple occurrences of raw based on the count returned.
sub raw {
$substr = substr ($_, 3);
$raw1 = substr ($substr, 0, -4);
$raw = lc($raw1);
}
how to count from the c to the t inclusive so I get 3, 4, 5, etc ...
These must a be a question you received a lot, but I couldn't find a similar thread! It's a simple question.
I need to delete a specific string from a file. For example the specific numbers "3456" from a file. I've tried with the tr comand, using
Code:
tr -d '3456' file,
but it also deleted whichever ocurrence of 3,4,5,6 from my file. Should I use a regular expression?
i need to overwrite each line of the file starting from a specific position to the end of the line
example:
ATOM 981 N PRO B 159 55.662 7 1 1.47 0.75
i need to write " 1.00 0.00 " starting from 20position
i tried
sed -i 's/^(.{20})*/ 1.00 0.00 ' filename
but it doesnt work :"(
I'm using the following awk command to find out the users home directory from /etc/passwd file.#grep jeesun /etc/passwd |awk 'BEGIN {FS=":"};{print $6}'But problem is when there are two name like "jeesun" and "jeesunadm" exist the script shows both result not specific one.
View 3 Replies View RelatedI am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....