I'm trying to compile a simple script for a ar71xx (bleeding edge /from snapshots) Openwrt router.I have previously compiled scripts for Kamikaze 8.09. I just copied the gcc file inside the SDK dir and used it without problems.
View 4 RepliesI'm new to Fedora, and haven't used any flavor of Linux in years. I'm attempting to run a few benchmarks that were given to me by my instructor, but every one I try to run gives an error "Cannot execute binary file". For instance,.inp.inThis command gives an error:bash: ./Mcf: cannot execute binary fileIt is not a permission problem, I have confirmed the file has execute permissions (one of the things I still remembered after all these years). I suspect all the benchmarks I have been given were compiled on Ubuntu. Would this be causing the problem? I do not have access to the source code, so I cannot recompile. If that is the problem, is there a way around it that doesn't involve throwing away a weekend and starting fresh on Ubuntu?
View 1 Replies View RelatedI found a Linux .x86 binary file that I've been looking for, but not sure what to do with it. Does this (*.x86) binary file format seem like something that could simply be run by command, or something that would need to be compiled first? There is not much information that I could find regarding the particularly file.
View 11 Replies View RelatedI have a strange issue on one of my machines. The same thing works fine on all the others. When I execute:
Code:
sudo -u myuser -i ls
I get:
Code:
/bin/ls: /bin/ls: cannot execute binary file
On the other hand if I just run
Code:
sudo -u myuser -i
and then run ls, it executes successfully, but I don't want to stay logged in as myuser I just want to run a single command.
I'm trying to install this app called genBlast. It's a bioinformatics tool that does some cool stuff (I guess the actual use doesn't matter that much). Anyway, it comes as a .tar.gz folder with about a dozen executables in it; no compiling necessary. I extracted it to the desktop so I didn't have to worry about permissions, and then just tried to run it from inside the directory (it's a command line app).
All of the executables work with a ./ except one, and it's the most important one for that matter. When I go to run it, I get the error message Code: bash: ./genblast: cannot execute binary file I've checked permissions with ls -l, run a chmod 'u+x' just to make sure, and everything else I can think of. But it just won't work. Also, I just installed it on another computer and it works fine, so I'm pretty sure it's on my end.
I tried to restart my httpd service.cannot execute binary file seems like the HTTPD wasnt stopped while it should be stopped. it skipped the 'stop' and just right away jump into 'start' command. my case is i just changed some php.ini configuration, and to have it changed i need to restart after changes.am i correct if i say my '/bin/rm' and '/bin/touch' files are corrupted?
View 3 Replies View RelatedI have download a 'package' that is meant to be used for genetic research and such...Anyway, i have downloaded the file and when i try to execute the included example, it says cannot execute binary file. i've tried all sorts of permissons/re-downloading/etc. I've pastted the attached readme that I followed EXACTLY, but am still gettin an error[URL]m/here is the readme that comes with it:EMINIM : Expectation-Maximized INtegrative IMputation
0. GETTING STARTED
0.1 Uncompress the package
$ tar xzvf eminim-1-beta.tar.gz
[code]...
Is there any Linux utility to combine two or more binary files into a single binary file ?
View 7 Replies View RelatedI am using Karmic. I just downloaded Cinelerra from sourceforge. Apparently there is no installation, you just run the binary (according to the Readme). The binary is set to be executable (-rwxr-xr-x), but when I double click it in nautilus nothing happens. When I go to the app directory in the terminal and do:
[Code]...
Trying to install Parallels Plesk Panel 10 x86_64 onto a completely new installation of Ubuntu 10.04.1 LTS
root@server:~# chmod +x parallels_installer_v3.7.1_build101014.17_os_Ubunt u_10.04_x86_64
root@server:~# ./parallels_installer_v3.7.1_build101014.17_os_Ubunt u_10.04_x86_64
-bash: ./p.arallels_installer_v3.7.1_build101014.17_os_Ubun tu_10.04_x86_64: cannot execute binary file
When im typing any command its giving error -bash: /bin/ls: cannot execute binary file. how to resolve this im using fedora 13.
View 11 Replies View RelatedWe are trying to install Oracle RPAS 13.1.1 on Redhat Enterprise 5 Linux Server, when we open the directory rpas/rpas/bin, the file DomainDaemon needed to start this server can be seen, but when we try to execute it as ./DomainDaemon it says "cannot execute Binary file", for that reason all files in this directory are giving same message .
We have tried the following :-
a) Given Execute permissions using chmod and run that.
b) Done file DomainDaemon to see if the file is corrupt.
c) Even tried executing using superuser account.
d) The OS and updates required as per Hw&Sw Requirements of RPAS 13.1.1 are there.
e) The directory has Execute Permissions
I just installed amanda-backup_client-2.6.0p2-1.rhel4.i386.rpm on my Red Hat Enterprise Linux 4 system. But I don't know who to check if it successfully installed or not. When I try to run amrecover from root, I get:
-bash: /usr/sbin/amrecover: cannot execute binary file
I have tried to execute the below ns.c program in RHEL 4 by using the command
#gcc -c ns.c -o ns.o
i am not getting any errors but while i am running object file by using the command
#./ns.o
i am getting the below error
bash : ./ns.o cannot execute binary file
/* trinoo daemon */
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
[code].....
I have two sets of drivers to install, one for a wireless device I'm trying to enable and the other is an driver set for a newly installed nVidia graphics card. Both drivers are from the manufacturers site.I'm running Ubuntu 10.04 on a Dell Precision 380.In terminal:
chmod a+x rt2870.bin
then:
./rt2870.bin
[code]...
I have java jdk1.5.0_08 installed on linux x86_64 architecture and I can execute java -version no problem. I took the same binaries and installed on ia64 architecture and the command java -version gives and error "cannot execute binary file" The Linux OS versions are 2.6.18-128.1.10.el5 on x86_64 and 2.6.18-128.4.1.el5 on ia64 Do you know whether the jdk1.5.0_08 binaries are compatible between x86_64 and ia64 architecture. The answer may be no, but I may be wrong and there could be some other issue. Where can I get the jdk1.5.0_08 specific to ia64 architecture for Linux version 2.6.18-128.4.1.e15
View 1 Replies View RelatedI have installed RHEL-5 on a 64-bit machine recently, and want to install java. Earlier when I did "java -version", it showed jre1.4.0. But for my application , I need jre 1.5.0 or later, so I decided to download jre1.6. I am the root user here and I downloaded the jre1.6 as rpm.bin as well as simple .bin format.
But the problem is that when I tried executing any of them, I am getting below error message :
" ./jre-6u16-linux-x64-rpm.bin: line 368: ./install.sfx.20520: cannot execute binary file"
Moreover, now when I tried "java -version", it is not showing any thing.
Could anybody suggest me how can I resolve this deadlock situation, as I need to install my other application at the earliest.
When I try to compile some Java code on Ubuntu 10.10 (kernel 2.6+) using make and a Makefile.
I get an error indicating that the make utility cannot execute the java compile command (javac).
The error reads: /bin/bash: line 6: .: /usr/local/jdk1.5.0_18/bin/javac: cannot execute binary file
I am executing make as root. I have enabled permissions on all directories in the path /usr/local/jdk1.5.0_18/bin/javac and on javac itself.
I get this error whether using a jdk installed via ubuntu apt-get, or whether I install the jdk myself. And I get it using either Java 1.5 or 1.6
My machine has an 80386 processor. I notice the make utility is built for i686-pc-linux-gnu
However, I can manually compile using javac.
I can compile calling javac from within a bash script.
I can compile using the java compiler gcj from the command line: gcj --main=HelloWorld HelloWorld.java -o HelloWorld.exe
But I cannot compile java code from the makefile. Any reasons why I might be getting this error?
I have downloaded a file called logkeys-0.1.1a. I unzipped it, but when I try to install (i type "sh install"), it says "/use/bin/install: cannot execute binary file".
View 11 Replies View RelatedI am facing problem on executing commands like df -h,ls-l,grep etc in /bin.
it is showing below errors:--
----------------------------------------------------------------------------------
login as: root
root@220.226.102.217's password:
Last login: Sat Jun 4 11:14:20 2011 from 220.227.54.149
-bash: /bin/egrep: cannot execute binary file
[code]....
In a project I'm working on with a few other people, I got the task of writing an assembler. The last thing I do is convert the commands into a binary representation, and jam it into a file. Now one of my teammates said he'd like to be able to "reference" the code within another program. He said he'd be able to do this if the file I output is a Linux object file. I'm thinking it'd also work as an executable. Anyway, he said he'd like to be able to grab the file and reference the binary by address. I'm still fuzzy on this, and if you're confused with what I said here, please tell me so I can ask him for better details.Anyway, I'm aware that gcc can compile files to ".o", but that's only for C/C++, and my file is just binary. I'm also aware of "ld", but I haven't seen any use of it to help me. I'm happy to hear suggestions as to what I can do. If anything, I think I'll implement a few functions to grab the bits and hand them to him in an array or something.
View 8 Replies View RelatedI get this error when I run the program that i created using eclipse.How to fix this?
View 3 Replies View RelatedHow to coded version info and other information likes author and company name into the ELF binary?
I prefer the put the version info during build step.
i need to change a binary file, let's say to find and replace username:
find string: "/home/name/bla-bla-bla/ "
new string: "/home/anewname/bla-bla-bla/ "
i can do it, for example, in emacs (hexl-mode), but interesting in writing a script instead. it will be much more better for me if i could do it automatically. is there an analog of: sed 's/string1/string2/g' ? P.S. the best way is to recompile the binary files i have, but there are no sources available.
I want to be able to disassemble a binary file, modify the assembly source, then assemble the modified assembly source back into a modified binary file. Purpose for this is pretty much just to play around with the Crackmes (www.crackmes.de) game.
Now, disassembly is easy, there are several tools that do it, including the standard objdump with the -d argument. However, how would you assemble an assembly source file created with objdump -d? GCC for sure doesn't want to assemble it in that format. What program, script, or arguments to GCC (none that I can think of) can be used to accomplish this? If someone also has some good tips for tools in general for Crackmes beyond what is standard in GNU/Linux I'd love to hear about it.
I have a binary file, which I need to process using my C++ application. Only thing I know is first chunk of the file is long, second chunk is int, third chunk is char etc... The binary file actually contains something like below. (which is represented in hex base).
D7 07 00 00 00 00 00 00 37 18 00 00 DE 07 ............ so on.....
I need to procees the file in the following way.
* I know the first data segment in my file is long. So it takes 4 bytes.
* so I need to read the first four bytes. That is D7 07 00 00.
* Then I need to reverse this as 00 00 07 D7.
* Finally I need to get the decimal value of above hexa decimal line. ( 00 00 07 D7)
* i.e. 00 00 07 D7 (in hex) = 7D7 (in hex- after removing leading 0 s) = 2007 (in decimal)
Like wise I need to process the whole file.
Arm-linux-strip for removing the symbols from binary executable file after compilation. What exactly the symbols means.
View 1 Replies View RelatedI'm running Linux version 2.6.33.4 on an ARM9 and can successfully copy directly into the framebuffer using the command:
Code:
cat /usr/myfile.bin >/dev/fb0
I converted myfile.bin from a 640 x 480 x 24 bmp.
What I'd like to do is to have the ability to dump .bin image files directly into the framebuffer from a C program without shelling out to a cat command.
My assessment is making a tree from a text file as follows: -reading a file line by line
-making a binary tree from it
- traverse by level the binary tree
- posting the traversal result to the same file without overwriting the text file- it is required to be append to the bottom of the text file (i have to do this in 4 languages: c#,PHP from Xampp,java, python)
i read the file with this script in java:
public class FileToStringArray {
privateString strLine;
privateString[] stringArray;
privateFileInputStream in;
[Code]...
What is the Terminology called of a Binary using a file that is not part of it's self? An example would be when a browser uses a HTML file for it's interface. The binaries code has to know how to find it and so on. I imagine that the applications binary uses a system call and that another application takes over.
View 1 Replies View Related