OpenSUSE :: Unlocking The LibreOffice Locked Files?
Jul 14, 2011
Whenever I save a text file edited with LibreOffice, I get a new, locked file which can be identified with its "~.lock" file prefix. This locked file prevents access (probably for security reasons) to the original file. However, this is a serious impediment as it forbids any further editing of the original file or document so long as the locked file has not been removed. Though erasing this locked file (which can be made visible with "Ctrl-H" if hidden) should free the original, this in fact is not the case. how to unlock these locked files?
View 9 Replies
ADVERTISEMENT
Jan 5, 2010
I'm a software engineer that has recently tested our hard drive locking feature; I discovered an issue that prevents the user from removing the hard drive password and I used a lot of drives to narrow the issue down. Is there any Linux utility/command that can unlock drives?
There is a windows based utility here: [URL] but you need to pay to use it. I guess I'm looking for the free Linux equivalent, if there is any. FYI: The Locking is performed at the firmware level of the hard drive so a low format will not unlock it. This is a specific feature most drives have that not a lot of people know about.
View 2 Replies
View Related
Aug 9, 2011
I've had a problem with libreoffice - it won't open files. That is,File/Open doesn't bring up a dialog box. File/New works and so does using a filename on the command line when starting libreoffice.Now there's good news and bad news. The good news is that with help from some libreoffice-users folks, I now know what caused this and I have a workaround. The bad news is that it's a bug in Libreoffice and I need some help testing other versions, please. So here's the steps to reproduce:
(1) Login to a Gnome session (KDE may also work, dunno)
(2) Start libreoffice
(3) Select Tools/Options/LibreOffice/General
(4) Observe in that page a checkbox 'Use LibreOffice dialogue boxes'
(5) Ensure the checkbox is blank (not selected)
(6) Save settings and check that File/Open pops up a dialog box.
(7) Quit libreoffice and log out of the session
(8) Login to an LXDE session
(9) Start libreoffice
(10) Select File/Open
*(11) Check whether a dialog box appears
(12) If not, select Tools/Options/LibreOffice/General
*(13) Check whether there is a checkbox 'Use LibreOffice dialogue boxes'
If your system does NOT open a dialog box in step 11 and does NOT have a checkbox in step 13, you are seeing the same bug as me.I'm using opensuse 11.3.
View 6 Replies
View Related
Mar 4, 2011
I received some M$ Power Points files and cannot open then. One file was from Power Points 2010, and another saved with the option 2000-2010. These were rejected by Impress with the failure report "Version Incompatibility. Incorrect file version". When a file was saved with the option Power Point 95, Impress tried to open it but when RAM useable ramped up to > 1GB, Impress automatically shut down. The only other information wrt the files is that its highly likely they contain graphics generated with M$Visio. Has anyone had similar experiences? Are there any work arounds?
[Code]....
View 7 Replies
View Related
Jul 15, 2011
I have a problem with LibreOffice 3.3.3.1 (from the libreoffice stable repository) and some (not all!) .doc files. When opening some .doc files LibreOffices starts and directly closes . The same problem occurs (for the same files) with LibreOffice from the unstable repository. When I go back to the LibreOffice version (3.3.1) shiped with 11.4. everything works fine. Hence, if you have problems with some .doc files downgrade to 3.3.1.
View 5 Replies
View Related
Jan 31, 2010
I have three folders on my desktop that I want to delete and they are locked. They have the "X" and "Padlock" symbols. How do I unlock them to delete. They are there from bad installs of the ATI driver.
View 3 Replies
View Related
Jun 5, 2010
just installed Peazip 3.1 from the repositories, and whenever i try to compress any file, i get a "some input files cannot be read (locked or corrupted)"
View 4 Replies
View Related
Jun 25, 2011
NetworkManager stores its connection secrets in a keyring called "default". I am prompted to supply the keyring password every time I log in, regardless of whether I select the "automatically unlock this keyring when I log in" radio button.
View 4 Replies
View Related
Jul 18, 2011
I'm trying to setup a LDAP server and it seems to have all gone pretty well. I set it so that users that type their passwords wrong 5 times are locked out for 20 minutes. That works fine, but if I want to log on as an admin and unlock their account before that 20 minutes is up it isn't working.Normally, (authenticating locally)
Code:
passwd -u blank888
works and does what I want it to. If I want passwd to recognize the LDAP server I use
Code:
passwd -D cn=Administrator,dc=example,dc=com -u blank888
When I run that, it always asks for the admin password like it should, but then will only work on some accounts and not others. Mainly I've seen that it only works on accounts that already had local accounts before connecting to the LDAP server.If I run a passwd -Sa command I will get something like:
blank888 LK 07/18/2011 0 999 7 -1
blank888 LK 07/18/2011 0 999 7 -1
test LK
blank888 already had an account on the machine, but also had a LDAP account along with test. So blank888 is showing twice because he has both LDAP and local accounts, whereas test only has a LDAP account. So now if they both get locked out passwd -D $adminDN -u $account will work for blank888 but not test. Then the results of a passwd -Sa would be:
blank888 PS 07/18/2011 0 999 7 -1
blank888 PS 07/18/2011 0 999 7 -1
test LK
I need to be able to unlock test using passwd. The LDAP server is running 11.2, and the hosts are running various Linux distros, and XP.Can anything think of a way to fix this without removing the LDAP server, adding local accounts for everyone, and then putting the LDAP server back on?
View 2 Replies
View Related
Jun 18, 2011
I'm currently running openSuSE 11.4 (kde v 4.6.4), and after unlocking the mouse cursor from the DOSBox (v 0.74) window, none of the Plasma Desktop Widgets or Components will register mouse clicks until I reboot.
Is there something config-wise I might change to prevent this from happening, or is there an otherwise quick way to restart only plasma using the terminal? Yakuake still drops down, and works, fortunately, so doing this is not a problem.
EDIT: Forgot to mention that all of said applications were installed from openSuSE repos using YaST2.
View 6 Replies
View Related
Feb 17, 2011
I've recently converted two Ubuntu 10.04 (one 64, one 32bit) machines to LibreOffice. We've used OpenOffice.org since early 2.x The issue is a database file created in OOo and now needing to be accessed in LO. As far as I know, there shouldn't be any issue with file compatibility. On the 64 bit machine, (a Ubuntu server installation - not headless) the file opens with no trouble and is fully accessible. (forms, reports, tables, etc.) However, on the 32 bit machine, trying to access the file over the network on the server via samba (because we also have Windows machines on the network, so I serve it all up via samba) I am able to open the database, but get the following error when trying to access any table, form or report: The connection to the data source "Mattress Prices" could not be
established.
[Code]...
View 4 Replies
View Related
Apr 18, 2011
I can't get Firefox to open Opendoc files in the correct program.
I'm using Gnome 2.32 (or 1.4.2? I'm not sure) and KDE 4.6.1 and in both instances whenever I download an ODT and right-click to "Open" it in the Downloads window, Firefox opens up "python /usr/bin/ebook-viewer (filename)".
I already went into mimeTypes.rdf and deleted the entire reference to odt, and I also went into dolphin, konqueror and nautilus to make sure it opens into Libre Office.
What else do I need to do to make Firefox open ODT files in the application I desire?
View 14 Replies
View Related
Nov 10, 2010
I have a few files on my desktop that have a lock on the top right corner of the Icon like this..
How do i delete it? it tells me that i do not have sufficient permission to delete this file..
View 7 Replies
View Related
May 3, 2011
I do monthly reports by copying the previous document, update the text and change the images. The images are the same size and numbers each months. Since last month I upgraded my laptop to Natty and suddenly my document went from 942 kB to 10.1 MB in .odt. When saving to PDF the usual size of 472 went up to 1.9 MB. I have searched the net and the forums but haven't seen anything about a similar issue.
I'm not sure if it's an issue that is from the previous document being produced in Open Office and now updated and saved in Libreoffice. Or if it's somehow something to do with the upgrade from Maverick to Natty. I would hope I don't have to uninstall Libreoffice and install Open Office as a solution (which I understand is not entirely easy in Natty, something I read about Open Office being transitional to Libre). I can't email simple documents to customers that's over 10 MB large...
View 1 Replies
View Related
Sep 17, 2010
I can not download locked files using vsftpd.If the file is not locked I can download it with no problem.If the file is locked I can not download
View 2 Replies
View Related
Apr 15, 2010
I have recovered most of my USB drive, but a couple of folders are locked and look like files. I'm unable to change permissions on them and "You are not the owner so you cannot change these permissions." appears in the properties tab. The owner is "184444735 - user #-184444735" and the group is "17414907" which makes no sense to me. Most other folders and files are OK. The disaster I recovered from was a partition move that failed. I used fsck to get most things back. Any idea how I get these couple of folders (the most important one is one of them "Documents" of course). to be visible?
View 3 Replies
View Related
May 17, 2011
I dual boot into Arch Linux and OS X 10.6 on my MacBook pro. I synced my UID between both OSes and created an HFS partition (with no journaling) to use as a shared home/Users partition. For the most part it works just as I'd expect, but sometimes when I'm booted into OS X certain files are "locked" (when I get info on a particular file the "Locked" box is checked under the "General" pane. I can resolve the issue by manually unchecking the box) and/or I get "Operation not permitted" when I try deleting or chmod'ing a file. In both cases I don't see anything out of the ordinary on the permission bits displayed with ls -l, except for a trailing '@' character in the position where the sticky bit would normally occur:
This '@' character shows up on ALL normal files, so doesn't seem to be linked to the locked/operation not permission situation.
On the Linux side of things I never have permission problems. To the best of my limited knowledge and experience with ACLs I've not found any ACLs on any of the files in question.
For what it's worth, I do most of my file editing using emacs (Aquamacs in OSX), is it possible it is setting weird permission bits?
What is the "locked" setting that OS X uses and does it have a permission bit equivalent (so at the very least I could recursively unlock all files in my home directory from the terminal) why might some, but not other files get "locked" when booting into OS X what is the meaning of the '@' character?
View 1 Replies
View Related
May 3, 2010
I want to use my flash drive, but I had files I put on using Ubuntu a few weeks back. Now I can only open them in read only copies and can't remove them, from the flash drive. I also have had some issues with file permissions on the hard drive. I was planning on reinstalling after a backup but now I don't know if that would be logical because the files might all be locked. I wanted to reinstall because I have issues with USB and these file issues.
View 2 Replies
View Related
Jun 19, 2010
I've just started using the amazingly useful Ubuntu One, but I can't sync files from my computer, due to the pesky locked keyring, default, which wishes to be unlocked. Unfortunately, I have no idea what the password for the default keyring is. Is there any way I could find this out? I've included a screenshot, just in case.
View 5 Replies
View Related
Jul 2, 2010
I have a laptop that I have been running 64bit lucid on after some problems with NFS Samba and SMB the installation got a bit trashed after some workarounds I removed nautilus completely and rebooted and got the looping login screen........ then I tried a suggestion to purge gdm but that left me with a blank grey screen and a mouse pointer. X11 has failed so I have no graphics
I can login properly to the drive from the terminal and can access my drive contents... I cannot load dolphin or nautilus from the terminal. So I have booted from a live cd and have moved some of my data to another partition but some is locked to the owner (me). How can I get my locked data opened so I can copy or move it to another drive, so I can perform a fresh install.
View 2 Replies
View Related
May 15, 2011
Nautilus problem in ubuntu 11.04 I recently upgraded and now having problems with nautilus.
1) I don't know for sure if it's related but all of the icons on my desktop (files located in desktop) have little lock symbols in the upper right-hand corner of the icon.
2) I cannot open files from the desktop (because they are evidently locked)
3) I cannot open any of the folders listed when I go to "Places" (between Applications and System top of the screen) Running nautilus from the terminal, I CAN go to different folders and open files in the usual manner.
View 5 Replies
View Related
Jun 7, 2011
where is LibreOffice 3.4 for OpenSUSE 11.4. If it is available yet.
View 9 Replies
View Related
Mar 2, 2010
I have just recently setup our network with an Ubuntu server which is being accessed by one Ubuntu workstation with nfs, & one XP workstation with Samba. Following instructions from the web, I set permissions like this:
sudo chmod 777 /media/Data sudo chown -R curley:curley /media/Data The problem is that files created in Samba are locked from nfs & vice/versa. I am assuming I need to add the nfs network share to the Curley group or use something more global than curley to make this work?
Samba is working ok from Ubuntu when browsing through Nautilus, but there is no access to shares when doing things like uploading or downloading files to the web (the "save file" window only shows local folders). So I guess I wouldn't mind just using Samba if I could map a folder in Samba to solve that problem.
View 2 Replies
View Related
May 22, 2011
in this days I'm receiving a lot of warnings about connection with software repositories. My OpenOffice suite has changed to LibreOffice 3.3.1, but now I have a problem which is the repository URL for LibreOffice working on openSUSE 11.2? I cannot find it.
View 6 Replies
View Related
Feb 3, 2011
I found the stable repository for LibreOffice is ready. So, I want to change OpenOffice to LibreOffice on my system. I want to know if need to uninstall OpenOffice firstly and which packages of LibreOffice must be installed?
View 3 Replies
View Related
Feb 13, 2011
How do I add truetype fonts to LibreOffice? I have already copied the .ttf file to the /user/share/fonts/truetype directory.
View 4 Replies
View Related
Mar 16, 2011
libreOffice garbles my screen and have to emergency get aout Ctrl-Alt-Backspace.
here is what i have in /var/log/messages:
Mar 16 18:58:28 aruba polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.471, object path
[code]....
View 9 Replies
View Related
Mar 19, 2011
I tried Word Processor, found that I can't key in any word & punctuation, and when I paste some words on it, it show, but if I add any word or punctuation, it doesn't show. Another problem is,I can't choose the format to save the thing. Is Libre Office really ready for end user?
View 9 Replies
View Related
Mar 28, 2011
I have the Sun JRE installed using the opensuse packages:
Code:
java-1_6_0-sun-1.6.0.u24-1.2.1.x86_64
java-1_6_0-sun-plugin-1.6.0.u24-1.2.1.x86_64
however every time I start Libreoffice I get an error message:
If I go into Tools->OPtions->Java I can see the Sun JRE is installed and 'Use a Java runtime environment' is ticked. how to stop this error message?
View 9 Replies
View Related
Apr 13, 2011
OpenSuse 11.4. LibreOffice any versions and Infra Resource OpenOffice can not open any DBF files from smb/cifs shares. At the same time he can write DBF to smb/cifs normally, but after saving it he can't open it!
Any other documents - no problem! odt, xls - any! but not DBF.. And this problem is only on OpenSUSE 11.4 and only in Libre/Open Office! Any other programms can open and write DBF files to smb/cifs shares.
View 4 Replies
View Related
