I would like to move some files between two machines and as scp sometimes is not the easiest thing to do. Do you know if there is any gui that makes this remote copy files procedure easier?
View 4 RepliesI'm trying to ssh to a client machine which as freeipa client setup Login works great but ssh via GSS.Is there a way to see what's being sent where? I already have the highest debug turned on the ssh side.
View 1 Replies View RelatedI have a script that moves files after 60 days from the FTP folder over to a trash folder which is not accessible by the FTP. From there I can delete the files whenever the drive get's full. That works fine so far.
The only thing that bothers me is that files moved to ".Trash" are not in any folder structure anymore (one big directory with the deleted files in it).
When I do a "ls -la" on the array {} I see the file names including the folders. I'm not sure if the find command or the mv command forgets about the directories.
This is the script: bash -c 'date;find /Volumes/data1/test/ -mtime +60 -type f -exec mv {} /Volumes/data1/.Trash/ ;;date' >> ~/mylog
I am running NFS and NIS servers in my FC8. Clients are also running FC8. Everything was working fine. I could login remotely to server as well as clients. Suddenly (few days ago) a problem started. I can not login remotely to client machines. I did not do anything. I can login to server remotely, but not the client. When I try to login, it accept password and nothing happens. Also, when I try to login from server to client same thing happens. We share the home directory of the server with client. Another question: there two type of nfs server nfs-user-server and nfs-kernel-server. I just use gui to set up the NFS. I don't know which one I am running. Is there any way to find out which nfs I am running?
View 1 Replies View RelatedWe administer a small lab of Ubuntu 11.04 machines. Users authenticate via NIS to the fileserver, which then uses NFS to mount their /home directory.
From time to time, seemingly at random, the machines will lock up. After about 15 minutes, they will go back to normal.
Switching the machine to the console with/ Ctrl+Alt+F1 doesn't help either - credentials get entered, but there's still a 15 minute wait before any commands can be entered. Some error messages show up at this point about processes that were running timing out. However, the root user can log in immediately (which makes us think that this is only affecting NIS accounts).
Logging in with the root account, we can ping our NIS server, and it responds normally. We can restart the networking and NIS daemons but neither of these help.
We checked the NIS error log in /var/yp/ypserv.log and it is empty.
We used to be running a different version of Ubuntu on the client machines (10.04 LTS), but not on the server.
i have problem in sending emails using outlook on my client machines i.e XP i am getting the error Relay access denied. i am using fedora 9 as our server. with dovecot and postfix and fetchmail.it was working fine previously .
View 1 Replies View RelatedI need to implement AIDE on my client machines. The builds on these machine are different, so each workstation will have its own specific db generated through running AIDE initially. It is not good practice to just leave the db on the machine, since an "attacker" would be able to view this information. However, at the same time I do not want to pull back over 100 different aide db's to the ftp server and have an update pull each specifically every time I need to run the check. The plan is to leave the db on the client machine, but encrypt it (using public/private keys). I need to be able to encrypt the file on the client machine. I will use a cron on the client to pull an update (from my ftp server) that runs AIDE. This update needs to be able to decrypt the file, use it running AIDE, then re-encrypt the file on the client.
View 1 Replies View RelatedI just set up an ubuntu 9.10 server (no desktop environment, command line only) and I'm unable to see my samba share. I followed these instructions. Here are the relevant parts of my smb.conf file: Quote:
workgroup = JASONGROUP
# I un-commented this
security = user
[code]....
I am trying to build a file server with RAID 5 over a couple of 1TB HDDs, to serve about 10 client machines using Ubuntu Server. I already own a 22-port switch: HP ProCurve v1810G-24 Switch (J9450A), which I am assuming will do the job. And for the actual server I am thinking of buying: HP ProLiant DL120 1U. Will this hardware suffice, or am I missing something important to get the whole thing running?
View 9 Replies View RelatedI am runnig WinXP and OpenSUSE 11.4 on dual boot.Generaly i am using SUSE, XP only for UpNP Media Center(server) to watch movies stored on my computer on TV via STB.For this i am using TVersity for wich i not found yet Linux alternative - or better say - i found it but is too heavy for my PC(P4 1.6 Mhz, 768 MB RAM, an dinosaur from Nvidia Vanta with 64 MB RAM)But this is not a part of my question.My question is how to transfer(copy, move...?) files from SUSE to WinXP?A large files like avi, mkv, mostly movies.I solved this to copy them on USB and then from USB to Win.This is a very slow proces because my PC have only USB 1.0And before asked me - all files are legaly downloaded from paysites.From SUSE, partitions(disks), folders and files under WinXP are visible but is not possible to copy files on them - acces is denied.Is there any way to do this?Suse is insatlled on LVM - /root/home/swapI am interesting ONLY to copy files from SUSE to Win, not at al from Win to SUSE.Code:
Directory: /home/janez
Sun Aug 14 07:53:26 CEST 2011
janez@linux-cia6:~> su - root
[code]...
I am encountering this issue:
Samba login/passwd client : why the users id arent the same on every machines?
So the client side config looks like this:
Quote:
/etc/pam.d/ files :
Code:
returns:
Code:
I just performed a fresh installation of openSUSE 11.3 and ISPConfig 3 on my server. I read through the article "The Perfect Server - openSUSE 11.3 x86_64 [ISPConfig 3]" and followed the instructions closely. Everything went smoothly.
I went into ISPConfig 3 and set up a DNS zone, email mailbox, FTP client, and website all for a client I created, hoping to use the client as the main account for a web site I want to host on my server. After I finished with this, I logged onto the server through FileZilla using my newly created client's information. It took me to the "main directory" with the folders cgi-bin, log, ssl, tmp, and web. When I open "web" I see an html file named "index.html."
I tried loading a mock website into the folder, also with an index.html file, and the files transferred over properly except the mock index.html file. The program changed the name to index.html.1. I tried to delete the original index.html file but was not allowed to. I then tried to rename it to something other than index.html and kept receiving a 550 Rename/move failure message. Can anyone point me in the right direction or help me resolve this issue?
I'm thinking perhaps I don't have the right permissions with the client to rename files, but since that's the account I want as the "owner" of this web site, I need to change the permissions so I can. I tried changing the ISPConfig 3 "Limits" for the account to SSH-Chroot Options "NONE" thinking that might be the issue.
I was trying to copy a few files to my phone via bluetooth when the file transfer window popped up with the progress bar stating "Connecting" and an error: the name org.openbox.client was not provided by any .service files..
I am using: openSUSE 11.3
Gnome 2.32, Kernel 2.6.38,
obex-data-server 0.4.5-12.2,
[code]....
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
How can you create a script to move or copy files from a main directory into multiple directories below the main directory.
View 7 Replies View Related1. Every Sunday2. Find all files older than 1 day3. Gzip these file4. Tar up the gzipped files into one tar file.5. Name the tarball with a date stamp indicating what day it was created, so we know that week's files are in the file
View 3 Replies View RelatedBeing relatively new both to Linux and this forum, i am sorry if i make a post that already is, evn though i couldn`t find it.My problem is i can`t move downloaded files over to root filesystem, i have downloaded and unpacked them to files. to change it`s looks and downloaded a skin, i open root, go to usr---> amsn ---> share --> skins, now i am to copy the file of the skin over to the root directory, butI also tried alt+f2, writing sudo conqueror, as an advice i got, but there was noe difference.
View 14 Replies View Relatedwhat I got - from a crontab run a script (understand that part), this script needs to count the amount of files in /outgoing/, then take 30 less that number, and move that many files from /readycalls/. I need to keep the asterisk outgoing que full of .call files with out having to many in there at any given time.
View 3 Replies View Relatedi have ubuntu 10.10 on my laptop and in my desktop 10.4 how can i share the folder on my desktop so i can be able to pull them from my laptop.
View 4 Replies View RelatedI have a problem sharing files between two machines on my network, one, my main one running 10.10 and the other running Lubuntu. I've used the share files option on my main computer, and they show up on the Lubuntu machine, but when I try accessing the files, I get a message telling me that they'failed to mount'. It's frustrating in that I can see that the files are there, and obviously the Lubuntu machine can 'see' them too. I'm sure that I must have missed out something, and I've tried searching, but so far have only come accross some very old tutorials that just confuse me more. Surely there must be a fool proof way of getting this all working? (I've tried Giver, but the Lubuntu machine refuses to run Giver!)
View 3 Replies View Relatedi use dropbox to share files about some classes at the university with a friend of mine.since he is on windows, my hidden files are shown to him. is there any way to make the files hidden on windows machines through ubuntu?
View 4 Replies View RelatedI have 3 home computers. Two of them are dual boot Windows and Ubuntu. The third runs only Ubuntu. I want to share files and two printers among the three machines. What is the best approach to doing this.
View 4 Replies View RelatedMy two machines are both running Ubuntu 10.10. I want to transfer program files between them using a local area network.
My Ubuntu machines can both see the Window machines on the network, and get files from them. But my Ubuntu machines do not detect each other as being on the network. Nor can my Windows machines detect my Ubuntu machines.
From what I can tell, that's normal, and I've become resigned to using a pendrive to transfer files between the two machines. Or even sending files as email attachments.
there is a clean and easy way to transfer files between two Ubuntu machines on the same local area network.
I'm running kernel release 2.6.26-2-686 on a i686 and are trying to share files between my machine and some Windows 95/98 machines. When I enter smb://ip_number/share_name in Nautilus, it works. I can browse the files. When I try the same with smbclient or smbmount, it complains.
smbclient -I=ip_number -L=//server/share gives cli_rpc_pipe_open: cli_nt_create failed on pipe srvsvc to machine tf_calibration. Error was ERRSRV - ERRerror (Non-specific error code.)
My new HP mini running Ubuntu sees my HP notebook running Vista,my Compaq desktop running Vista, and my HP desktop running XP as computers belonging to my workgroup, but I can only access my files on the XP machine. The mini and the notebook are wireless and the desktops connect to the router by cable.
All of the computers connect through the router to the DSL modem, and each of them connect to the HP wireless printer. None of the other computers see my mini as belonging to my workgroup, specifically including my XP computer. Figure that it is likely normal that I cannot with my mini open files that I find on my XP, but have to copy and paste them to my mini or one of the flash drives I use with it before I can open them.
I understand I have described a "well known problem" caused by a non standard sequence in Vista, that can be obviated by a fix to the login sequence that can be made to the linux code in my mini so that it will recognize and perform the login (user name and password) that is required when a Vista machine is encountered.
But I'm in over my head, unable to even find the command line on my mini.
I have 2 machines both using U 11.04, one of them being Studio. I have tried to connect them together (via a modem/router of course) to browse files but I can't connect. I get error messages. I've installed samba and everything.
View 1 Replies View RelatedI have a vsftp server running, and we have problems sporadically where people (not the person who uploaded the file) cannot delete files uploaded from OSX machines. We never have this problem with files uploaded by PCs. Anyone ever heard of this or know what I should check? The users uploading the files all belong to the same group. Also, I think if you log in to the FTP server with another OSX machine, it will let you delete them. I'm looking at the folders now, they have drwxrwxr-x. When i try to delete them from a PC, it gives me a 550 Remove directory operation failed.
View 14 Replies View RelatedHad a bit of a partition nightmare during an install, involving my home directory.
My partitioning looks like this and my install is still completing:
sda1=/boot
sda2=/
sda3=swap
sda4=/home
My old home partition and data is located in a partition that I preserved, called /homebak and is on sdb.
Once my install is complete, what is the best way to move the data from /sdb1 (homebak) to my newly created /home?
For the record, I tried to copy the partition during set-up, but something wasn't happy.
I've got my important files backed-up, but would prefer not to lose about 5 gigs of music and video.
how do i move multiple files at once using the command line?
View 4 Replies View RelatedLast fall I got a new Linux desktop computer from System76. Before that, I had a 1997-era beige G3 Mac. (This Mac is pre-USB plugs.)
I still have files on that old Mac that I need to move to the new machine. Some are text files and various other kinds of files, but mostly, they're image files, and there's a lot of them.
The Mac has a SCSI port and an Ethernet port. No Firewire, no USB.
My question: What's the best way to move the files from the old to the new machine?
(I think it would be a hassle to try to e-mail them, as I have quite a lot of image files on the Mac.)
Also, if some of the files (like text-files?) that are in Mac format can't be read once on a Linux OS, how would I make the necessary conversions?