Sorry for this question. But where lost Repository Compiz Fusion, Emerald? Index of /repositories/X11:/XGL:The day before yesterday I had access to this repository. Where has he gone?
View 9 Replies
I'm not sure about anybody else, but I have spent many hours today trying to figure out how to get Compiz as a window manager. Alas, I have tasted success. Once compiz and Emerald are both installed, simply go to Code:Configure Desktop > Default Applications > Window Management and then select from the drop down menu.Now those beautiful emerald themes will work. I have seen many other 'solutions' for KDE4 and they may have worked for some, but not for me. I hope this will help somebody who may be as frustrated as I was.
View 3 Replies View RelatedI tried to install a package of extra Compiz Fusion plugins but it won't run. Says there is some kind of conflict or error. Anybody know where I can find this. The particular plugin I want is Show Mouse.
View 4 Replies View RelatedI have emerald on Ubuntu 9.10 64bit, and I wish to use emerald to decorate windows.When I run
Code:
emerald --replace
, the windows are decorated, but the command does not return. That is to say, I need to press
[code]....
So I've done the Compiz --replace command but it doesn't work. I've even uninstalled Emerald but there's no change. What is this?
View 4 Replies View RelatedI had installed compiz and emerald when I was using Fedora 9, upgraded to 10 (compiz and emerald still working at this stage) tho when I upgraded to 11 compiz and emerald seem to have crashed (i upgraded using preupgrade both times, maybe this might be a bit of a problem...) Since upgrading to 11, neither compiz or emerald would work. Ive tried reinstalling both compiz and emerald, and even erasing them both, restarting and then installing (both times thru yum).
This has brought back compiz and the effects (I can use AWN, desktops on a cube etc) but there is no window borders (cant move, resize etc). Ive tried different window managers (emerald, gtk and even kde4 has been installed..) and tried reloading the window mangers thru the fusion icon. Nothing seems to work, unless I stop compiz from running at startup (but then I lose all the desktop 'candy'). Searching the net has brought up a couple of options (Under CCSM):
- Check the box "Windows Decorations" and under its properties write emerald --replace (or whatever WM)
- Check the box "Place windows"
but none of these seem to work either.
I run the final version of Lucid Lynx and have a 9800gt.
I followed the following procedure to install compiz (and I want compiz, not just the built in desktop effects) on my computer, all sudo with KDM disabled where necessary:
1. apt-get install nvidia-current
2. nvidia-xconfig
3. apt-get install build-essential libxcomposite-dev libpng12-dev libsm-dev libxrandr-dev libxdamage-dev libxinerama-dev libstartup-notification0-dev libgconf2-dev libgl1-mesa-dev libglu1-mesa-dev libmetacity-dev librsvg2-dev libdbus-1-dev libdbus-glib-1-dev libgnome-desktop-dev libgnome-window-settings-dev gitweb curl autoconf automake automake1.9 libtool intltool libxslt1-dev xsltproc libwnck-dev python-dev python-pyrex <- these were prerequisites mentioned by the guide on compiz.org
4. apt-get install compiz compizconfig-settings-manager compiz-kde compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald
At this point, everything installed successfully, and nvidia driver was working perfectly.
I verified this: desktop effects worked OOB.
5. compiz --replace &
6. emerald --replace &
At this point, compiz apparently started. Emerald worked perfectly: all of the window decorations worked OOB. I went and ran ccsm, and turned on quite a few settings. It didn't enable ANYTHING. When I reran ccsm, all of the settings were back to default, and enabling any new ones had no effect on window behavior. Strange. I looked on the web and found:[url]
The ubuntu page said that I should not "Enable integration into the desktop environment" if gconf was selected. BUT THE FLAT FILE CONFIGURATION WAS SELECTED BY DEFAULT. Then I went back to the site and it said flat file configuration was recommended!
Maybe I shouldn't have enabled desktop effects first (NOTE THAT I LATER DISABLED IT and things still did not work)?
I have problem for emerald and compiz in KDE fedora 11. The problems are:
1. Emerald is not running at startup so I have to type emerald --replace every time I login otherwise I get no windows border.
2. The static application switcher in compiz is not running at startup so I have to go to ccsm and disable then reenable it again otherwise when I point my mouse to the edges of my screen it wont do anything.
I was trying to install and run Compiz fusion with fedora 12. I downloaded all the packages etc using both the gui and terminal according to some guides. When I click the desktop effects button, it says 3d is not enabled, however the guide I followed said to enter glxgears (or something to that effect) and if it came up with 3d gears then 3d was enabled...I am very confused. There was an application I ran after downloading/installing some packages that caused the screen to go white and I had to reboot. I read in another forum this may have something to do with my drivers...gotta check my graphics card specs, will post when I find them.
View 5 Replies View RelatedI made a fresh install of Fedora 13, installed the video card driver for my video card. How do I get compiz fusion to work and what do I need to install? when I enable desktop effects the system panels disappear. Also I'm looking to install that effects editor that has all the different effects menus.
Okay I think I got the menu loader and Compiz working.. for those who browse to this thread.. the answer is. yum install compiz-fusion fusion-icon the desktop cube was a little tricky to get working.
However if I enable desktop effects fromt he preferences menu the system panels still disappear.
How to enable compiz fusion in fedora 15
View 8 Replies View RelatedSo. I Installed Ubuntu 9.10 PPC from the LiveCD on my Mac G5. There is 4GB of ram in it. 2 CPU's and A Nvidia FX5200.
Now i want to install compiz fusion. I knew that Nvidia doesn't bring out PPC linux drivers. So what do i need to do to get compiz-fusion working?
Problem 2 is I can't find my Xorg.conf
I have been working on this copiz fusion thing and I was following the deal at medibuntu and got to where you run "compiz --replace" and I get this warning...
WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
WARNING: Application calling GLX 1.3 function "glXDestroyPixmap" when GLX 1.3 is not
[code]....
i am tring install compiz fushion in my desktop computer until i could install it
but i can not find the way to make it do cube and 3d effects.
if i installed ubuntu 10.04 or later on sd card, it will possible to enable compiz fusion???
Processor and memory
intel Core 2 Duo
* Intel Core 2 Duo processor with 3MB on-chip shared L2 cache
* 1066MHz frontside bus
* 4GB ram
* NVIDIA GeForce 320M graphics processor with 256MB of DDR3 SDRAM shared with main memory5
I updated my up to date F12 to F13. I have what must be a 640X480 display with no way to change it. I get an error:
"Error: Cannot retrieve repository metadata (repomd.xml) for repository: pgdg90. Please verify its path and try again" on all Yum commands so no yum installs are possible. I don't have the /usr/bin/GLX command So theAIGLX doesn't work.
I just did a clean installation of Fedora 12 on my Intel Core2 Duo system. I installed packages to use compiz fusion. When I select the Compiz Fusion Icon option from the System Tools menu, my screen goes white, and I have to SSH into the system and reboot it
View 4 Replies View RelatedI went to this link hand added the file to /etc/yum.repos.d, but get the "Could not contact source fedora-compiz-fusion, so it will be disabled" error when trying to enable the source in PackageKit
View 10 Replies View RelatedI am having problem with compiz-fusion icon in fedora 14... I have installed compiz, but when I click the compiz-icon to start it.... the system logs off and again asks password...
Same thing I have done in my HP laptop, but in it, its working.. The problem comes in my pc only... I also want some help for knowing, how to add compiz-icon in the startup of the kde session...in "FEDORA 14", so that when I login using kde, the compiz-fusion automatically starts with this process... Somebody please give me a solution...Frnds I am having problem with the nvidia driver for fedora 14.. Whenever I start compiz.... The screen blacks and logs off the session
I accidentally deleted my compiz fusion Icon from my top panel and now I can't seem to get it back. Before 10.04 I could just run Applications/System tools/ Compiz fusion icon and it would appear in my panel. This doesn't work any more! when I run "fusion-icon --no-start" in terminal I get
* Detected Session: unknown
* Searching for installed applications...
* NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING
* Using the GTK Interface
* Decorator "/usr/bin/compiz-decorator" is invalid.
* Setting decorator to Emerald ("emerald --replace")
How do you do start directly with compiz fusion 'on' meaning that you dont have to go to apps - system - compiz fusion
View 9 Replies View Relatedcompiz fusion wont work.I try to enable desktop effects but it says it can't do it.Window manager warning: Attempt to perform window operation 26 on window none when operation 26 on none already in effect then went to quite a primative theme.normally the last two lines don't appear.My desktop has been weird lately, and not quite working well.Is there a way to like, roll back changes?it was working perfect last week... if i could roll back about a week it would be exellent..does anybody know what is wrong??
View 3 Replies View RelatedI hate this compiz fusion crap on knoppix 6.. I know you can turn it off using 'knoppix no3d' on the boot prompt using a live disk. But how do you save that cheatcode permanently for a hd-installed knoppix sys?
View 1 Replies View RelatedI just installed RPMFusion free and non-free, and now update manager is telling me that it needs to install updates "RPM Fusion (free) Repository Configuration" and "RPM Fusion (non-free) Repository Configuration". When I try to install these I get a message asking 'Do you trust the source of the packages?" and i click 'Yes", it then asks for a password for authentication, and then I get message saying "Could not update packages. Failed to process request" and under more details:
failed to install signature: Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2926, in install_signature
self.yumbase.getKeyForPackage(pkg, askcb = lambda x, y, z: True)
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 4309, in getKeyForPackage
result = ts.pgpImportPubkey(misc.procgpgkey(info['raw_key']))
File "/usr/lib/python2.6/site-packages/rpmUtils/transaction.py", line 59, in __getattr__
return self.getMethod(attr)
File "/usr/lib/python2.6/site-packages/rpmUtils/transaction.py", line 69, in getMethod
return getattr(self.ts, method)
AttributeError: 'NoneType' object has no attribute 'pgpImportPubkey'
i want to know command to Add Compiz Fusion Icon to Startup Applications Preferences at Stratup program . i want to Compiz Fusion Icon run when i login .
View 5 Replies View RelatedWhen i try to start compiz-fusion the system logoff.
I use fedora 11.
VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller
I followed leigh123linux' guide about the compiz fusion installation and set-up. Unfortunately, I failed to do a compiz-check before running the whole thing. I enabled compiz and did a reboot. The next time I logged in, my screen just turned white. I can still see my mouse moving though, but I couldn't disable the compiz.
View 11 Replies View RelatedI am running 64bit version of Fedora 12. After I logout or restart, I lose compiz function and I have to manually activate by "applications" - "system tools" and compusion fusion icon click.
Is there a way to automatically start each time?
After kernel branch update some times ago i found compiz very slowly, but with older branch compiz was not such slow as today.
Here is my uname:
Quote:
I am running Ubuntu 10.04 in VBOX on a Windows 7 host. I have a Nvidia Geforce 9600 gt graphics card. I would really like to get Compiz Fusion desktop effects working on it. Is this possible? I have read some threads where people have ultimately found out that the VBox guest addition drivers are not compatible. How can I determine if mine is going to work?
View 3 Replies View Related
