OpenSUSE Install :: Yast Partitioning Error - 4017
Feb 26, 2010
Trying to install OpenSUSE on an HP ML115 with an SmartArray E200 controller. Get to the partitioning screen, select LVM and carry on, when "preparing disks" I get error -4017
"Failure occurred during the following operation: Creating volume group system from /dev/cciss/c0d0p2"
Google the error and found a similar fault which was fixed back in OpenSUSE 10.2!
The only one I have involves partitioning the disk with Ubuntu and then installing OpenSUSE on top of that!
View 9 Replies
ADVERTISEMENT
Aug 8, 2010
Trying to encrypt my partitions for swap, root and /home directories. However, when I go to partitioner and select the drives as sdb1, sbd2 or sbd3 and click on the encryption. It errors with a -3016 error. Can't find anything in the release notes or the security documentation that would lead me to why this screen is popping.
View 3 Replies
View Related
Mar 2, 2010
When I deleted uninstalling and installing some packages in Yast2 I got this output:
Deleting mc
Additional rpm output:
rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) storing record "4.0-1" into Requireversion
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) setting "3.0.4-1" records from Requireversion index
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) setting "" records from Requireversion index
and on and on for 3 pages for every package.
View 4 Replies
View Related
Nov 18, 2010
I'm having trouble with Yast, I noticed today that I can't open the control centre from the desktop (along with install/remove software) when opening from the command line I get. the following output:
** (y2controlcenter-gnome:9050): WARNING **: error accessing /desktop/gnome/lockdown/disable_command_line [Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)]
Yast2 control centre opens, but none of the options load when selected. I have tried updating everything through Zypper which didn't work. (aka zypper ref/up etc). Then I tried removing yast and installing it again. When I did this (and downloaded the Yast control centre again the above errors, reappeared.
View 3 Replies
View Related
May 8, 2010
What the heck do I do now? 2 times I've re-installed suse 11.2 and this is what I get every time it tries the first update. I just had a perfectly fine working version of 11.2 that was installed using the network install just 3 days ago but I messed up and couldn't access mySql. Today I blew it away thinking I'd just start over and now it doesn't work. I installed it exactly the same as 2 days ago, whats changed? How do I fix this? I can't access the software repository settings in yast, nothing happens when I try to start it.
View 2 Replies
View Related
Aug 24, 2010
I have just downloaded Wine and I am trying to install it on my computer. as far as I know I should do it with yast, and so I try to do. When I start the installation, I allways get the message :Failed to mount cd:///?devices=/dev/sr0,/dev/sr1 on /var/adm/mount/AP_0x00000001: No medium found (mount: No medium found)"
I don't know why it's asking for a CD if I already have downloaded the file to install it
View 5 Replies
View Related
Jan 30, 2010
partitioning of 2 HD (1 40GB SSD HD & 1 TB ordinary HD) in OpenSUSE 11.2. how to partioning both harddrives for best performance (no other OS).
View 7 Replies
View Related
Jun 11, 2011
I am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies
View Related
Sep 22, 2010
Just acquired a new laptop, Gateway NV, i5-430, 4GB, 500GB HD, Intel GMA, and, of course, Windows 7. I wish to install openSUSE (as I have on my other laptops and boxes, with Windows/XP and (sigh..) one Vista). No problems with partitoning any of them, but I have not partitioned a Windows 7 HD.I do wish to keep Windows 7, but SUSE has become my primary OS. So the question is: do I use Windows 7 utilities to "shrink" its main partition and then install 11.3 ? Alternatively, I can use the 11.3 install DVD to do the "shrink". I have already run the install up to, but NOT INCLUDING the actual partitioning.Windows has commandeered the first three (3) primary partitions, so SUSE goes to an extended partition. Windows looks something like:
1: 12GB (Recovery Partition)2: 102 MB (System Reserved)3. 453GB Windows 7 primary partitionThe 11.3 install proposes reducing #3 (above) to 163GB and allocating the remaining to SUSE (swap, /, and /home). I will probably tinker with the sizes (I really do not need a 280BG /home), and I want some space for an alternate distro.Any and all advice on the partitioning choice(s) will be appreciated. I did also attempt "GParted" from the Ubuntu liveCD, but the only way to boot that liveCD was to use "-xforcevesa" and I was not completely confident of that!(Note: already created the "factory recovery" DVDs and the apps/drivers DVD. I may dry run them before I do the actual partitioning. There is no data or software on it.)
View 9 Replies
View Related
May 22, 2011
I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies
View Related
Mar 13, 2011
I usually run my updates every Friday, my last good update was 4-Mar-2011. I could not update this week and got an error -"PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Raw/openSUSE_Tumbleweed_standard/'"I get a similar error message when starting Yast Software Management.Is this related to the 11.4 release? I'm waiting for fewer bugs before I upgrade to 11.4, so I'd like to be able to keep current with 11.3.
View 3 Replies
View Related
Jul 4, 2010
I have 2 physical 500 GB Sata drives/stripes that appear as 1000 GB C: drive under WinXP. I have partitioned that drive into 750 GB Windows native C: and an empty 250 GB partition F:
When running the installer for OpenSuse 11.2 only the physical drives appear in the list of available hard drives 2x 500 GB (= sda and sdb), rather then the partitions of 750 and 250 GB (would expect sda1 and sda2). Is it possible to install Opensuse on the 250 GB partition (F: under windows) without destroying the WinXP installation and data on the C: partition?
View 9 Replies
View Related
Feb 24, 2010
From a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
View 5 Replies
View Related
Dec 12, 2010
I can get the installation history via the command line:
Code:
rpm -qa --last | less
Is it not possible to get it from YaST in the same way as you can in Synaptic? It would not only be nice to see a basic list, but also what has been pulled in as dependencies and have it grouped by 'installation sets'. Too much to ask?
View 4 Replies
View Related
Jul 23, 2011
I don't know why this is happening, however, all of a sudden I am unable to install any packages (from OpenSUSE repos of course) using either Zypper from the CLI or YaST2. Every time I try and install anything, or perfom a zypper dup, I am greeted with the below error message.
Code:
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
I'm no stranger to OpenSUSE's package manager, however I have yet to come across this error before.
View 2 Replies
View Related
Mar 16, 2010
when in command line (because i cannot start plasma either) i get an error message stating [/usr/lib/YaST2/bin/y2base: symbol lookup error: /usr/lib64/libstdc++.so.6:undefined symbol: _ZNst_num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4] i would like to know how bad it is and if it can possibly can be fixed
View 9 Replies
View Related
Jun 8, 2010
Anyone know what happened to the nvidia repos and are they going to come back up?
Can't access it through yast, ftp, or a web browser.
View 2 Replies
View Related
Jul 20, 2011
The updates used to happen automatically in 11.4 but the last few weeks no updates at all even if I do it manually in yast still no updates is this normal?
View 9 Replies
View Related
Mar 17, 2011
I get the following error when YAST tries to install the latest updates----Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index----could it be from removing KWALLET? Now I cannot re-install it due to this error.
View 9 Replies
View Related
Jan 21, 2010
I am having trouble getting my portable hard drive to mount after partitioning it for VFAT. I originally had it partitioned as NTFS but I realized that my Xbox 360 will only mount VFAT filesystems. I believe that I partitioned it correctly with yast. However I am still having trouble mounting it. Below is the output of fdisk, mount and dmesg.
# fdisk - l
Disk /dev/sdc: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1e371e37
[Code]...
View 2 Replies
View Related
Mar 18, 2011
I have a very simple question I am creating a new partition for storing files, installers, documents, etc, I am going to make it ext4, now my question is, do I have to specify a mounting point?? I would not like to do that, but if I do not specify a mounting point, will I be able to access that partition? So in what cases you specify mounting point and when you do not specify mounting point?
View 6 Replies
View Related
Apr 5, 2011
I have a Ubuntu server with encrypted LVM2 (logical volumes - /, /var,/tmp,/home etc.). I need to migrate this to an OpenSUSE 11.2 server (cannot use a later version due to the availability of a binary-only module - that is just the way it is). When I fire up the installer, I cannot seem to find an option to mount the encrypted disk (/dev/sda) which has the LVM2 structure. I do not want to lose /home (logical LVM2 volume), so a clean blank slate install is not an option.
View 2 Replies
View Related
May 15, 2011
Has anyone tried installing on an mSata drive? I tried installing OpenSuse and received the message that the partitioning on my MyDigitalSSD drive was not readable.
Id like to know if its just my generic MyDigitalSSD drive that doesnt work, or all mSata drives.
View 9 Replies
View Related
Jan 29, 2010
If you go to Vuze: The most powerful bittorrent client in the world. you'll see that you can download a tarball for linux. But, if you're like me, you'd rather get the RPG so you can use YaST to install it, allowing you to add vuze to your application launcher and desktop. After digging through google for the rare RPG files for the latest version of vuze.
Step 1: Download the swt libraries RPM here: ftp://ftp.pbone.net/mirror/packman.i...m.6.1.i586.rpm - ( original link found on this page )
Step 2: Download the Vuze RPM here: ftp://ftp.pbone.net/mirror/packman.i...1.1.noarch.rpm (original link found on this page)
The Vuze package needs the swt libraries pre-installed, so download that one first. In just two clicks, you'll have the latest version of Vuze installed by YaST on your system! BTW, this is my first post and first thread in these forums. I just installed SUSE on Tuesday and it's my first Linux OS I've tried.
View 3 Replies
View Related
Nov 18, 2010
Is it possible to configure Yast Software Manager module so that it does not completely exit when done installing a package? It get's annoying to search for a package and install it, the software manager exits, you then have to reopen it, install another etc. a few minutes later.
Seems this would be a config option, but if so I can't seem to find it.
View 5 Replies
View Related
Nov 20, 2010
I cannot open YaST nor 'install software' in the GUI. A new window is appears in the panel, but after 10 seconds or so it disappears. When in terminal, i can open YaST.
This happens from time to time and often after a while I can open it again in GUI (also when rebooting). It's very annoying when I want to install something and I cannot open Yast2 (I'm not familiar with terminal, so that's why i want to stay with GUI, which is KDE btw).
View 1 Replies
View Related
Nov 28, 2010
I have a problem when trying to update or install new application via Yast, I'm using opensuse 11.3. PackageKit Error repo-not-available: Failed to download /content from Index of /distribution/11.3/repo/oss
View 9 Replies
View Related
Feb 6, 2011
I have old laptop that I intend to give away to a child who's family, due to bad financial, has no means to afford it.
I'll quote Ken Starks: "A Child's Exposure to Technology Should Never Be Predicated On The Ability To Afford It"
I have installed openSUSE 11.2 with KDE (as this one works perfectly on that laptop), but I wish to put it in one of the languages (ordered by preference)
1. Serbian
2. Croatian
3. Bosnian
During and post installation there were neither of those languages available.
View 2 Replies
View Related
Apr 25, 2011
As I have had some problems using kpagager I've used file asociations to set yast as the default. When I download an rpm the yast icon bounces around for a while and then dies. I assume this means I need another set of yast launch instructions. Suppose I could download to a directory and set it as a repo but would rather just have it launch for rpms as it's quicker. 11.4 KDE 4.6.0
View 9 Replies
View Related
Nov 13, 2009
i had the problem that i couldn't surf access the internet while DNS and PING worked well. That i solved with ipv6.disable=1 at boot time. Now i can suf the internet with a browser but YAST is still unable to access the repositories which are accessible with a browser. Can someone please help me what the problem with YAST is?
View 9 Replies
View Related
