OpenSUSE Hardware :: How To Check Mobile's Phone Contents
Mar 10, 2011
I just bought the usb cable that allows me to connect my samsung C5212 to my computer.AFter plugging it in my computer I received the following messages:
[181418.820263] usb 3-1: Product: SAMSUNG Mobile USB Modem
[181418.820265] usb 3-1: Manufacturer: Samsung
[181418.820266] usb 3-1: SerialNumber: 000000-00-000000
I just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
I am looking for an application to assist me to back up my sim card on my mobile telephone. In fact I am aiming to copy all my phone contacts and restore it on a newer phone if possible.
I have previously attempted to do this on Wammu without success.
I have also attempted to install monosim without success.
I have HP mininote 2133 with Suse SLED 10.I am trying to connect internet via bluetooth and a mobile phone. The machine itself does not have bluetooth, but it recognizes the Belkin bluetooth gadget, which I inserted into the USB port. I started the bluetooth with Yast and "Information about the equipment (I don't know what the correct term is in English, because my OS is in Finnish language)" tells that there is Belkin Bluetooth adapter connected.But my mobile phone cannot find my computer (there is nothing wrong with the phone, because it can find other computers!) when I try to pair up the phone and the computer
how to transfer files from my mobile phone to my opensuse 11.4 pc via bluetooth? ntw i need to buy a bluetooth car or equivalent maybe is there something common, chip and easy to set up?
So I can send pictures from my phone to my PC, I've bought a Bluetooth USB adapter, just a cheap one.
System>Preferences>Bluetooth without the adapter says 'no adapters are plugged in'. With the adapter in I get a preferences screen to find new devices, so my PC is seeing the Bluetooth adapter. I've then got it to successfully find both my phone and my wife's and entered the provided pin into each phone. My desktop is duly listed as a device on each phone.
However, if I try and send a picture from either of the phones to the PC the phone says it can't see any devices and the sending fails.
Also, how do I send files the other way, from PC to phone? I installed Obex but it simply hung then closed itself.
My aim is to test on my computer some .jar games for cell phone before installing them on my Samsung GT-S5230. Unfortunately, the result of the following commands is not so happy:
Code: java -jar ./The-Crow.jar Failed to load Main-Class manifest attribute from ./The-Crow.jar Code: manolo@manolo-laptop:/media/DV/GIOCHI$ jarwrapper ./WSC20093D.jar
What is a good app to convert videos in Ubuntu? I usually watch documentaries, movies etc in my mobile phone and need an app to convert AVIs etc with a low file size and about 320x240 resolution. Used WinFF but it doesn't seem good enough
I'm trying to send mp3 files via usb to my mobile phone, but file transfer speed gets incredibly low, like 5,3 kb/s. How to solve this / useful ubuntu software?
I have HP mininote 2133 with Suse SLED 10. I am trying to connect internet via bluetooth and a mobile phone. The machine itself does not have bluetooth, but it recognizes the Belkin bluetooth gadget, which I inserted into the USB port. I started the bluetooth with Yast and "Information about the equipment (I don't know what the correct term is in English, because my OS is in Finnish language)" tells that there is Belkin Bluetooth adapter connected.But my mobile phone cannot find my computer (there is nothing wrong with the phone, because it can find other computers!) when I try to pair up the phone and the computer. What should I do to connect?
Ist column shows different customers( like N customers are there) , they require different bandwidht links based on some resolution time will be generated and we have to fix this line with in this resolution time , if not before 1 hr for each customer , this has to genetate some alarm and send the SMS to the particular mobile numbers.everythig is there in the GUI like customer , how much BW they want and what is the time duration , only thing we have to do is ,, linking with the GUi and writing some code to send the generated alarms to the mobile numbers specified.
I have some .3GP movies that where made with my mobile phone. I can only play the video and not hear the audio. Is there a way to convert these movies to other format so I can edit them. And is there a way to play a .3GP movie in a mediaplayer with the proper codecs?
There is a feature in MS Windows OS that allows users to play the songs on their mobile on the computer via bluetooth, i.e., the users can use the computer speakers as a bluetooth headset. Are there any ways or any software to do the same in GNU/Linux?
I find myself using SSH from my mobile phone to manage administrative tasks when I'm away--completing updates and the like, things that can be done during normal usage but sap my RAM and CPU to the point of frustration, given the hardware I've got to work with. It's convenient, I can do what I wish (without the benefit of an X session) while I'm at work. The issue I run into is the fact that my auth.log is littered with items like this:
Code: May 16 12:53:17 BETA sshd[18941]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=200.111.184.180 May 16 12:53:19 BETA sshd[18941]: Failed password for invalid user lala from 200.111.184.180 port 41787 ssh2 May 16 12:53:25 BETA sshd[18943]: Invalid user master from 200.111.184.180
Which tells me that some inconspicuous person and/or botnet keeps trying to get into my system. This is generally annoying; at this point, my system isn't used for anything particularly critical; however, the fact that only failures or questionable successes--such as those from my mobile, the IP and Host of which can vary a fair bit (and the host resolution almost always fails, based on the way the IP/Host advertisement is presented to an external host is established--it's essentially manufactured)--doesn't tell me who/what has figured it out. I've done what I can to tamp down SSH access to the system, root is blocked via SSH (a moot item, since root isn't allowed locally), I've limited only my own username as allowed to connect via SSH...all it would take, though, is an alphanumeric dictionary that hits the right combination to get a password prompt, and to be able to brute-force it from there.
Overall, I know there's few, if any ways, to prevent someone attempting to get into my system via SSH; what additional steps can I take to minimize the possibility that I might end up compromised?
I can pair my phone and laptop using bluetooth, from Network manager I can select my phone and make a connection. But then I can't access anything.I looked at the connection info from nm and tried to ping the given dns addresses. That failed. And I pinged those addresses when I reconnected with wireless and it failed. So, where are these setup? I didn't do it
I have internet in my nokia mobile phone I can use it through nokia pc suite in windows but I cant install it in ubuntu so is there a way to my ubuntu to my phone without installing nokia pc suite.
Here's the situation: I have a PC/Laptop = connected to the internet. I have a mobile phone = not connected to the internet. I connected my mobile phone by a USB cable to my PC/Laptop.
Here is the question: How do I browse the internet on my mobile phone, using my PC/Laptop's internet connection?
I have a problem when trying to mount a memory card in my cell phone. I connect the phone with an USB cable, select mass storage as the phone prompts it, but no luck.
dmesg shows
Code: [ 200.673190] usb 3-1: new full speed USB device using ohci_hcd and address 4 [ 200.823377] usb 3-1: New USB device found, idVendor=05c6, idProduct=1000 [ 200.823386] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Code].....
Just to be sure I tried the same thing with FreeBSD, though I knew from past experiences what to expect from it. It just worked(tm) flawlessly, but I'd rather not keep FreeBSD just for the sake of one device I can't seem to get working with Linux. All I can guess it must either be a kernel bug that has persisted for far too long or a faulty udev rule.
I am working on Ubuntu-10.4 and I want to transfer 'hello.txt' file form my computer to mobile phone (Nokia 7210).When I run command, My mobile ask for accept the connection from ubuntu (device name connected to ubuntu). I accept the connection, Then I got the error log given above.
when i open up to configure bluetooth it says i don't have any plugins available and when i try to search for appliences from my phone it cant recognise anything. Please help me! I want to transfer mp3 music from my laptop to my phone. I am using Linux Mint 9.
I am the new bies for redhat.i am using "Nokia 5300" on "RHEL5"as i am going to connect the phone to the sysytem.System gets hang.on the main screen it shows some alphabeats and it Gives the message "KERNEL PANIC".i had read in some thread to use "VID" and "PID" but i dont know how to use it.Is their any method so my kernel can Find my hardware.and runs smoothly. please suggest me some methods so i can use my Nokia phone as an MODEM.
ever since maverick came out and I updated I can't connect to internet via my mobile phone. I used to connect via bluetooh establish a dun connection and then I could connect from network manager. Everything goes ok with the bluetooth the connection is made and then NetworkManager doesn't see anything...what can I do?
Windows and Samsung PC studio Software I used to surf internet in my Laptop(Windows Xp) using Samsung PC studio software with the help of my Mobile Phone.When i am in Linux without Samsung PC studio Software.I am using Ubuntu 9.1 and trying to connect internet through Samsung Mobile Phone C6112.When i connect this mobile Phone to the Ubuntu through Cable wire, The Ubuntu recognized its a Samsung Usb Modem.I tried using Mobile BroadBand Connection Settings in Ubuntu.its not helping.Solutions which are useless
1.People says that Wine cannot be used to execute the Windows Version Samsung PC studio Software Because the Wine Cannot recognize the USB activities.
installing the software BluePad, which allows a user to control their desktop environment with a Java-enabled mobile phone. I am still adjusting to Fedora (and some other Linux distros) from Windows and I am unfamiliar with installing and executing software programs. Also, if you could also include any pre-requirements involved in the installation..