OpenSUSE Hardware :: 11.3 & Trying To Install PCMCIA Card - WG511T

Sep 4, 2010

I was trying to get a card to work well with linux. I searched compatibility lists and found the NetGear WG511T to appear good. I got one and when I insert the device, Linux never sees it. In Windows, it appears like normal and drivers install. In OpenSUSE 11.3, the device is never recognized; no lights turn on, not listed under iwconfig, or networkmanager. I've installed the madwifi drivers, but they dont help since the computer never sees the device itself (to install drivers). Is there anything special I need to do to get the device recognized by the system?

View 1 Replies


ADVERTISEMENT

General :: Driver For PCMCIA NIC Card MN-120?

Apr 1, 2010

i have a pcmcia nic card microsoft broadband networking 10/100 ethernet notebook adapter, model MN-120. the debian 5.04 doesn't seem to recognize the nic. is it possible to find linux driver for it?

View 1 Replies View Related

Fedora Networking :: Use A Dlink DWL-650 Pcmcia Card?

Jan 3, 2011

Older laptop I just upgraded to FC13. I would like to use a Dlink DWL-650 pcmcia card. The system sees it.

#iwlist wlan0 scanning
Cell 01, mac, chan, freq and everything else for my base router
Cell 02, same thing for my extender unit
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:0D:88:AA:AA:AC
inet6 addr: fe80::20d:88ff:feaa:aaac/64 Scope:Link

[Code]...

ifcfg-wlan0 is set for DHCP. Notice above no IP. If ifcfg is given an IP/mask still no IP. So it seems to be up and running, just not accessible.

View 6 Replies View Related

CentOS 5 Hardware :: How To Configure PCMCIA Card

May 4, 2011

I have an old PCMCIA card and I would like to use in a newly installed centos5.6. I want to use, but I do not know how. ifconfig-a does not return the card details. I can see the pci devices both the controller and the PCMCIA card as well. I read, I have to load the kernel module yenta to use the pcimcia card, but I couldn't. The /sbin/modprobe -l | grep "yenta" does not return anything, and do not have either of these modules in library
(find /lib/modules/`uname -r`/kernel/ | grep yenta)
How I can move forward welcome, or where should I start to search or indeed whether the card can support? How to config PCMCIA Card at CentOS5 now?

# lspci -vvv
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Dell Device 0233
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- ...
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8039 (rev 10)
Subsystem: Surecom Technology Device 0428
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- ...
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

# lspci -nn
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. Device [10ec:8039] (rev 10)
# yum list | grep pcmciautils
pcmciautils.x86_64 014-5 installed
# uname -a
Linux localhost.localdomain 2.6.18-238.el5 #1 SMP Thu Jan 13 15:51:15 EST 2011 x86_64 x86_64 x86_64 GNU/Linux

View 2 Replies View Related

Fedora Hardware :: Pcmcia Wifi Card Hangs My F14 / Fix It?

Feb 5, 2011

I am trying to pin point the problem I am having with my wifi card which used to work just fine with F13 and after installation of F14 it hangs my OS.

Fedora hangs when card is inserted and if it is inserted at a boot time, fedora hangs at starting udev.

I attached my messages log file but I think there is no info in there.

About log:
I have some strange problem with my bios, cause every time i restart my laptop it always has same time and date so you should ignore repeating time and date on reboots

at line 1 i turned on pc
at line 580 it finishes shuting down i issued with reboot
at line 581 it is starting up again
at line 1140 i inserted the pcmcia wifi card, and there is nothing there

you can see that at next line 1141 system is rebooted and log file is started again

View 1 Replies View Related

Ubuntu Networking :: Wireless Pcmcia Card Will Not Power On?

Sep 27, 2010

I am using a Linksys wpc600n wireless card that works fine in windows xp, but will not even power on in ubuntu. I tried to use the pccardctl command to get the card to turn on but it still does not turn on.

View 1 Replies View Related

Ubuntu Networking :: PCMCIA Card Not Working In Lucid?

Dec 6, 2010

Here's the dealy-o. Card is a Netgear, computer says it's a BCM43XG REV01.Card is functional but not working on my fresh Lucid install.Here's what it says:

p { margin-bottom: 0.08in; } derek@derek-laptop:~$ lspcmcia -v
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:0a.0)
Configuration:state: onready: unknown

[code]...

View 8 Replies View Related

Networking :: Ubuntu 8.10 With Broadcom Chipset Pcmcia Card

Dec 18, 2010

some time ago I installed 8.10 on my x20 thinkpad. I at the time was trying to get it going on a Netgear WG511 v2 card. I was eventually successful in getting it going with ndiswrapper and all has been happy until...

I decided to give my laptop to an elderly friend for his first computer. He is living in a location where (for a variety of reasons) he is sharing a network connection to the internet with a few people. The protocol there WPA2 TKIP (IIRC) and no matter what the bloody thing won't connect. Here at home I run a different setup so its not a big deal

So, I thought I'd try another card to get it going there. I chose a "Aironet" card (badged a Dell 4800 LT) and tried to install this on 8.10

I expected it would install out of the box, but did not "seem to".

I followed the steps on this page, but still it won't connect to my WiFi at home (which I am using to connect to with this x31 thinkpad)

I am using Network Management Applet 0.70 and this works fine with the Netgear card, even showing all the local networks it finds.

When I plug in the Dell card it blinks the activity light and the status light in seemingly meaningful ways, but nothing seems to connect and I find nothing listed in the Network Applet.

I suspect that the OS is discovering the card as when doing an iwconfig I find two entries that would be that card:

eth1 and wifi0

iwlist scan returns:

which makes me think two interfaces are taking the same hardware...

iwconfig returns idential results for eth1 and wifi0

View 2 Replies View Related

Ubuntu Networking :: Won't Recognize New Pcmcia Wifi Card / Resolve This?

Jan 1, 2010

I got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...

View 1 Replies View Related

Ubuntu Networking :: Ralink Wireless G Pcmcia Wifi Card

Mar 11, 2010

I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU)‏.
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.

I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.

Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?

View 1 Replies View Related

Ubuntu Networking :: Ralink Wireless G Pcmcia Wifi Card?

Mar 11, 2010

Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?

View 1 Replies View Related

Ubuntu Networking :: PnP PCMCIA Card For Dell Inspiron 8100 In 10.04?

Oct 14, 2010

I finally got around to trying Ubuntu 10.04 on a "decommissioned" Dell Inspiron 8100 1.2Ghz P3 512MB RAM 40GB HD... and Ubuntu is absolutely AMAZING compared to Windows! I'm a Mac guy and honestly Ubuntu gives 90% of the Mac OS GUI and 0% of the "brain damage" of WinBLOWS...

The only thing missing in this laptop is WiFi which I want to do via one of the PCMCIA slots since the mini-PCI is a combo 10/100 network + v.90 modem card... and I need to keep the Ethernet port and fax modem capabilities.

What are the best "Plug n Play" PCMCIA WiFi cards for our "G" and "N" WPA2 ONLY Airport Express WiFi network? I'm new to Linux so I'd really like to avoid editing and replacing system files and drivers if possible to get a PCMCIA card working. I'd also like a card that works in WinXP Pro SP3 since this laptop is dual boot capable.

View 1 Replies View Related

Ubuntu Networking :: Find A Good PCMCIA Wireless Card?

Nov 1, 2010

Any opinions on which of the PCMCIA wireless cards work the best out of the box? I currently have a USB wireless adapter but want to get rid of it and use my PCI slot on the laptop. I am currently running lucid. I would rather not have to mess around with NDISWRAPPER again, something that has a native linux driver would be great.

View 2 Replies View Related

Hardware :: PCMCIA Linear Flash - Read And Write To The Card

Mar 4, 2011

The card in question is a PC Card (PCMCIA) 16Bit Intel Series 2 Flash Memory Card (2MB) and I want to be able to read from and write to the card. I've rebuilt latest stable kernel (2.6.37.2) with all the PCMCIA options turned on or built as modules. I've got an SRAM card, a CompactFlash Card (in a CF to PC-Card adapter) and the Linear Flash card to try, the SRAM card I'm not expecting greatness from, but hoping to prove that the slot works (it registers, but doesn't get much reported from lspcmcia). The CF card in the adapter works. I'm expecting to see a block device in /dev but nothing appears lspci:

[Code]....

View 11 Replies View Related

General :: Unable To Connect Wireless WG511 Pcmcia Card

Oct 17, 2010

I have got a netgear wireless PC Card WG511 made in Taiwan (not china). I have intalled it in windows w/acouple of ver. Settling on v1. I am first generation pc. maybe toold for Linux? I can't even figure out how to post in the Dam Small Linux website. But have read most of the posts in linux questions. I can't install a wireless card ;<( this is an old laptop and would be like usable if I get the *&^%$ wireless working. In fact, does anyone have a wireless card working with Dam Small Linux? I have the book but, it's not been much help. Other that telling me to add nodhcp in the boot startup. That didn't help either. I have learned alot through this misery of the wireless nic.

View 10 Replies View Related

CentOS 5 Networking :: Cant Get 3Com 3CCE589 PCMCIA Card To Work

Jun 24, 2010

I am trying to get an old IBM 600e to work with Centos 5.5. The install seems to have gone well but I am struggling to get any networking support. I am concentrating on a 3Com 3CCE589EC card which seems to be on the supported list. It works fine under Windows 2000 on the same computer so I believe the hardware is OK. When I insert it the following messages are shown in /var/log/messages:

pccard: PCMCIA card inserted into slot 0
pcmcia: registeing new device pcmcia0.0
0.0: RequestIRQ: Resource in use
0.0: RequestIRQ: Resource in use
0.0: RequestIRQ: Resource in use

Am I likely to have an easier time with a different card and if so which?

View 3 Replies View Related

Fedora Networking :: Make A D-link Dwl-650+ Pcmcia Card Work Through Ndiswrapper?

Jul 29, 2009

I am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.

But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?

View 14 Replies View Related

Ubuntu Networking :: Mobile Broadband Pcmcia Card Doesn't Work With 9.10?

Jan 24, 2010

So here's the thing: I have a mobile broadband pcmcia card that worked just well on jaunty, but as I installed karmic it doesn't work, coz it mounts the card's storage but doesn't recognize the hardware. The help says I need the package 'udev-extras', but there's no such package for karmic and the one for jaunty doesn't work with karmic.

View 4 Replies View Related

Ubuntu Networking :: XFCE Hardy - Installing PCMCIA Wireless Card?

May 16, 2010

I have a Dell Latitude C400 laptop running Xubuntu Hardy. I am a newbie and am trying to install a PCMCIA wireless card. The card is a TRENDnet model # TEW-421PC/A. I am using XFCE.

View 4 Replies View Related

Ubuntu Networking :: D-Link Wireless WNA-1330 PCMCIA Card Failure

Oct 1, 2010

I had Ubuntu 8.04 and the D-Link Wireless WNA-1330 PCMCIA card worked just fine. I upgraded to 10.04 and it fails. I can see the network of wireless routers in my neighborhood, but when I try to connect on WEP 40/128bit with my hex key of my router, it tries to connect but can't get a DHCP address. I cannot ping the router in that state, of course. I have two other 10.04 laptops (with built-in wireless) and they connect just fine, as does a Windows Vista laptop. I also tried the pci=noapi item in /boot/grub/menu.lst, but that failed to show any results either. The card lights up like it should, and acts just like it did with 8.04 on the lights, but it doesn't connect. I end up seeing the "Enter your WEP password" dialog again and again unless I hit Cancel.

View 1 Replies View Related

Ubuntu Networking :: PCMCIA Card Worked In Xubuntu Jaunty - Have The Inf Driver - Get It To Work?

Mar 5, 2010

still stalling after all those months, everything is explained here

[URL]

the card works fine in xubuntu jaunty, doesn't in xubuntu karmic or ubuntu karmic. i (my wife) wants to use ubutun karmic, but we still can't get this ATMEL PCMCIA wirelesscard to work on ubuntu karmic like it does on jaunty... and we have the windows INF drivers

View 9 Replies View Related

Networking :: PCMCIA Wifi Card Not Recognized On IBM Thinkpad A30p With Ubuntu 10.04 / Sort It?

Dec 21, 2010

I've installed Ubuntu 10.04 on my IBM thinkpad a30p.
now everything seems to work fine, except for the wifi card (edimax ew-7708il) i have.
PCMCIA modules are loaded, but the card just doesn't appear in the network devices...

View 9 Replies View Related

Fedora Networking :: Orinoco Silver PCMCIA Wifi Card Doesn't Find Any Networks In F11

Sep 21, 2009

I have Lucent Technologies Orinoco Silver 11 Mbps PCMCIA wifi card. It worked perfectly in Fedora 10, but after updating to Fedora 11 it stopped finding any wireless networks. The updating were done with automatic updating utility. The card works perfectly in Windows, I tested it today.

My laptop is HP nx6110 if that matters.

Here is the situation:

When I plug-out the card, the Network Manager disables wireless networking as it should. When I plug-in the card, wireless networking is enabled, so the system seems to recognize the card in some way.

If I try to connect to "Hidden wireless network" (because there isn't any wireless networks listed in the Network Manager) system tries to connect for a couple of minutes, and then asks wireless settings again. Orinoco card's lights DOESN'T blink normally when connecting to the network (one light should blink rapidly and one should light continuously, but both are blinking rarely or doesn't blink at all).

In System->Administration->Network in tab Hardware (hope those names are correct, I use Finnish version of Fedora...) is:

It seems that the card is detected right.

Here is what I have done to get the problem solved: In System->Administration->Network I have tried to connect to the wireless network manually (disabling the Network Manager). I can't get the connection. It gives me random error messages, sometimes "Check the cable" or something like that, sometimes just timeouts IP determination.

I have tried to connect different wireless networks, no connection. All tested networks worked with another computer.

No matter if I reboot or service network restart or plug-out plug-in the card... the problem still appears.

Tried to find (and reinstall) drivers:

Code:

No Matches found

Code:

Here is the output of lspci. The output is the same if the wifi card is connected or not.

Code:

LAN connection is working just fine.

View 3 Replies View Related

Debian Hardware :: Pcmcia / Vodafone Mobile Connect Card Model Globetrotter By Option Work On This Compaq Nx9005?

Aug 14, 2010

Does anybody have ideas how to make this Vodafone Mobile Connect Card model GLOBETROTTER by Option work on this compaq nx9005?

Pictures of the beast:

Bonus points will be awarded if no closed source software is required.

View 1 Replies View Related

OpenSUSE Install :: Acpi Better / Card Went To Legacy What Version Still Has Ati Drivers For Card

Dec 6, 2009

i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?

q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.

i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.

View 9 Replies View Related

Ubuntu Installation :: Server Install On Laptop Doesn't Install Pcmcia Support?

Jan 12, 2011

I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.

View 1 Replies View Related

OpenSUSE Hardware :: Globe Trotter 3g Edge (Pcmcia)?

Aug 24, 2010

I have a 3g globetrotter (pcmcia card). This card works great in ubuntu but when I plug it into the same laptop running suse 11.3 and open network manager the laptop locks up.

View 1 Replies View Related

Software :: Use Apt-get' To Install Plugins / Programs Getting Error With Pcmcia

Feb 21, 2010

I am very new to Linux and I have been dealling with my problem for the past 9 days. I have installed Debian to my hard drive from a DSL disk. It seems like it is an old distripution (kernal is Linux 2.4.26 on i686). I saw that there was an old version of Firefox that desparately needs to be upgradeed. I tried to install the latest version with out any luck. It was the same situation when I tried to the install Flash Player plugin. I then tried to upgrade the distribution by doing the following:

[code]...

This scared me a bit so I searched the internet for a solution where I found people had the same problem I have, but the solutions given, which worked for them, did not work for me. I also tried using the dpkg and aptitude methods of installation.

View 7 Replies View Related

Ubuntu Networking :: Can't Install VS10259 PCMCIA & Broadcom BCM94306MP REV 4

Mar 31, 2010

I'm trying to install two devices...one at a time. o far I've had zero luck with either.

1. ViewSonic VS10259 PCMCIA Wireless 802.11G PC Card Adapter.
2. Broadcom BCM94306MP REV 4 Internal Wireless Adapter.

I can't get either of these installed on an old Dell Inspiron 8500. I'm really an absolute beginner with this...I've installed the newest Ubuntu on this machine and am trying to get it to connect to the internet, but am clueless. Sorry if this should be posted in absolute beginner. Don't want to double-post.

View 6 Replies View Related

Ubuntu Installation :: Plop Bootmanager Pcmcia Usb Live Install ?

Jan 29, 2011

I run plop bootmanager - [url] to load live linux distros from the usb drive on the PCMCIA card. This is because grub2 doesn't yet support the pcmcia drivers and I wanted to make use of my old laptop.

I run the instruction on how one should install ubuntu on a usb stick from [url].

The process goes through when I see the live CD screen where it lets me try Ubuntu without installing. The splash screen comes up and all and remains there for sometime but after that it stops and then I get this error:

Its trying to search for my cdrom drive when it shouldn't as I have it on usb drive!

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved